PROVN OF STORE ROOM WITH HARDSTANDING NEAR BLDG T 674 MT VEH PARKING OF 18 MAD PROVN OF 01 X TOILET BLOCK 04 SEATER NEAR BLDG P-66 OF 1st BN SIKKIM AND PROVN OF TOILET BATHROOM WITH SEPTIC TANK NEAR BLDG T 674 OF 18 MAD PROVN OF HARD NEAR P29 AND 30

Amount

Surface dressing n exc 15 cm deep soft / loose soil, complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil, complete all as specified and as directed.

Excavation in trenches n exc 1.50m wide and not exc 1.50m deep for foundation and getting out in soft / loose soil, complete all as specified and as directed.

Excavation in trenches n exc 1.50m wide and exc 1.50m to nexc 3.0m depth, for foundation and getting out in soft / loose soil, complete all as specified and as directed.

Excavation over area not exceeding 1.5 m deep and getting out in soft/ loose soil complete all as specified and as directed, complete all as specified and as directed.

Excavation over area exceeding 1.5 m deep, not exceeding 3.0 m and getting out in soft/ loose soil complete all as specified and as directed, complete all as specified and as directed.

M&L PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, complete all as specified and as directed.

M&L Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft / loose sioil.felling under floor, complete all as specified and as directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.50m above the starting point, complete all as specified and as directed.

M&L precast cement concrete (1:3:6) type C-1, (using 20mm graded crushed stone aggregate) block masonry with solid blocks 10cm in and setting in CM (1:6), complete all as specified and as directed.

M & L for RCC (nominal mix) (1:2:4) type B-1, (using 20mm graded crushed stone aggregate) as in foundations, footings, plinth beam etc, complete all as specified and as directed.

M & L for RCC (nominal mix) (1:2:4) type B-1, (using 20mm graded crushed stone aggregate) for columns, pillars, piers, posts and struts, complete all as specified and as directed.

M & L Reinforced cement concrete (Nominal mix ) (1:2:4) type B1 (20 mm graded crushed stone ggregate) as in Beams, cantilevers, bressummers,lintels over 1.5m span, complete all as specified and as directed.

M&L mild steel TMT bars 10mm dia and over cut to length bend to shape required incld cranking bending spirally for hooping for column, hooking ends and binding with and incld mild steel wire (annealed not less than 0.90mm dia or securing with clips), complete all as specified and as directed.

M&L mild steel TMT bars 5mm dia and over upto and incld 10mm dia in stirrups, spacer and binders, complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns and plinth beam and similer work etc in rough finished surfaces of concrete flat, complete all as specified and as directed.

M & L for formwork to sides of pillars, posts, strurs, piers, columns and stanchions in rough finished surfaces of concrete in square, rectangular or polygonal, complete all as specified and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc. also splays between floors and beams, etc.for rough finished surface of flat concrete, complete all as specified and as directed.

M & L 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6), complete all as specified and as directed.

M&L 15mm thick rendering on fair faces of brick work or concrete masonry walls in cement mortar (1:4) with WPC incl finished even and smooth w/o using extra cement, complete all as specified and as directed.

Supply only integral water proofing compond, complete all as specified and as directed.

M & L preparation plastered or unplastered new surfaces of wall and applying three coat of white wash, complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls and applying two coat of OBD over a coat of chalk whiting, complete all as specified and as directed.

M & L for preparing newly plastered surfaces of wall and applying two coats of cement base paint over a coat or alkali resistant primer, complete all as specified and as directed.

S&F roof trusses, framed trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle channel or flat section) incl distance pieces, cleats, nut and bolts conforming to FE-410w (grade 250-E quality A), complete all as specified and as directed.

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as in ridge, complete all as specified and as directed.

M&L Preparation and applying two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, of any description, over 10cm width or girth not other wise, complete all as specified and as directed.

S & F for GI frame work of size 605 x 605mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flangesof 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and incl ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and as directed.

S & F for hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60 mm long and expansion hold fastener 12.5 mm dia 40mm long, complete all as specified and as directed.

M & L for 4 mm thick E- board ( Everest) non combustible moisture resistance design building boards, fixed to GI aluminium frame work with screws as in ceiling, complete all as specified and as directed.

M & L hardcore of gauge exc 63mm but n exc 100mm,deposited, spred and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface, complete all as specified and as directed.

M & L for 75 mm thick cement concrete (1:4:8) type D-1, (40 mm graded crushed stone aggregate) as in sub base or sub flooring fininshing the surface even and rough to receive the topping layer, complete all as specified and as directed.

Non Skid ceramic colour tilles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 15mm thick screed bed in cm (1:6) in flooring, complete all as specified and as directed.

M & L glazed ceramic coloured tiles 450 x 350 x 7 mm thick, in vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 10mm thick back coat in cm (1:4) in dados/skirting, complete all as specified and as directed.

M & L for 100m thick cement concrete (1:4:8) type D-1, (40 mm graded crushed stone aggregate) as in sub base or sub flooring fininshing the surface even and rough to receive the topping layer, complete all as specified and as directed.

M&L for 100 mm thick PCC (1:2:4) Type B-2 (using 40 mm graded crushed stone aggregate) as in floor fininsh, complete all as specified and as directed.

M & L for machine cut kota stone slab flooring 20 to 25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing incl 15 mm thick screed bed or bedding layer of cement mortar (1:6), complete all as specified and as directed.

M & L for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including 15mm thick back coat of cement mortar (1:4), complete all as specified and as directed.

M & L for cement concrete type CI (1:3:6) using 20 mm graded stone aggregate in coping including weathering slightly rounded or chamfered angles and trotting, complete all as specified and as directed.

Forming 20 mm thick expansion joint, filled with preformed bituminious filler top 30 mm primed and sealed with sealing coumpound grade 'A' thickness of concrete slab 100 mm thick, complete all as specified and as directed.

Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound grade 'A', complete all as specified and as directed.

S & F for Pressed steel door frame for doors, size 165 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

S & F for 35mm thick plain framed panelled shutter (any number of panels) of 2nd class H.W with panels of timber flat on both sides or of venerred particle boards medium density, wood particle board with commercial face veeners, complete all as specified and as directed.

M & L Preparation and applying two coat of synthetic enamel paint over one coat of pink primer on new wooden surfaces, of any description, over 10cm width or girth not other wise, complete all as specified and as directed.

S & F for 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed, complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings as per specification & drawing, complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site, complete all as specified and as directed.

S & F 200mm long aluminium anodised barrel tower bolts of extruded sections, complete all as specified and as directed.

S & F 150mm long aluminium handle cost type anodised, complete all as specified and as directed.

S&F 100 mm size butt hinges, medium weight , cold rolled, mild steel and fixed, complete all as specified and as directed.

S & F steel ventilator with top hung shutter, including hinges, steel peg stay, complete all as specified and as directed.

S & F for Steel windows with side hung shutters incl projecting type hinges with steel handle, and steel peg stay complete with glazing bars, complete all as specified and as directed.

S & F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; framework of water tank,dunnage rack and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

S & F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane, complete all as specified and as directed.

S & F 4.0 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and as directed.

M&L 75 mm thick PCC (1:3:6) type C-2, (40 mm graded crushed stone aggregate) for plinth protection, path/ steps etc to be finishing cement concrete surface even and smooth without using extra cement, complete all as specified and as directed.

S & F 110 mm bore PVC bends any radius, complete all as specified and as directed.

S & F 75 mmPVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed.

S & F 75 mm bore PVC bends with including for all necessary extra joints cuttings and waste to any radius, complete all as specified and as directed.

S & F 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

S & F 20mm bore of GI tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and as directed.

S & F 15mm bore of GI tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and as directed.

S & F bib taps cast copper alloy chromium plated with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed 15mm bore, complete all as specified and as directed.

S & F 15mm dia fancy type pillar tap, cast copper alloy, capstan heads, chromium plated,screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe, complete all as specified and as directed.

S & F Angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified and as directed.

S & F two way Angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified and as directed.

S & F shelf of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 300 gms), complete all as specified and as directed.

S & F towel rail 600 mm long of PTMT fixed with and including chrominium plated brass screws and wooden/plastic cleats (Min wt 190 gms), complete all as specified and as directed.

S & F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and as directed.

S & F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and as directed.

S & F vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and as directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and as directed.

S & F toilet paper holder with flat recessed type stainless steel fixed to wall, complete all as specified and as directed.

S & F PVC valve less, syphonic action type flushing cistern 10 ltr capacity low level, with inlet, ball valve float, flush pipe and handle including brackets, complete all as specified and as directed.

S & F for Vitreous china wash basin, white, flat back, size 550mm x 400mm including cutting for and pinning in ends of brackets and waste pipe, complete all as specified and as directed.

S & F vitreous china urinals, half stall type white with grating and union for discharge pipe including fixing plugs beddeing urinal againest wall in cement morter 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed.

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60 gms), complete all as specified and as directed.

M & L PCC (1:4:8), type D-2 conrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in 110mm dia, complete all as specified and as directed.

S & F 110 mm bore PVC Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

M & L for providing precast cement concrete (1:2:4) type B1 (20mm graded crushed stone aggregate)cover slab for manholes hoods, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and as directed.

M&L machine pressed chequered cement concrete tiles size 30cm x 30cm x 25mm thick and above, set,jointed and pointed in neat slurry with grey cement and pigments in floors cut and polished. over and incl 15mm thick screed bed or bedding layer of motar for laying floor finishes in cement plaster (1:6), complete all as specified and as directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work, complete all as specified and as directed.

M & L for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc, complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) vent cowl, complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) junction single (Single T), complete all as specified and as directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping not less than 20mm size, medium grade with all necessary fittings, surface wiring , for light /Fan point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes/ on PVC rectangular block with 3 mm thick plastic laminated sheet cover of suitable size (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc, complete all as specified and as directed including testing on completion.

All as per item No 88 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs with cables 1.5 Sqmm size, complete all as specified and as directed.

All as per item No 88 here – in – before but for one 3 / 5 -pin switch socket outlet 5 amps on independent board, complete all as specified and as directed.

All as described as per item No 88.00 above but point wiring with 2.5 sqmm single core multi stranded copper conductor PVC insulated & unsheathed FRLS cable 1100 volt grade and 2.5 sqmm PVC insulated and unsheathed FRLS cable 1100 volt grade with multi stranded copper conductor for earth wire for 15/16 amp multi purpose socket combination point on independent board, complete all as specified and as directed.

Supply and fix switch piano flush button, single pole, 5/6amps, one way, complete all as specified and as directed.

S & F in replacement under repair Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type, complete all as specified and as directed.

Supply and fixing lamp/angle holder insulated body with back plate for batten fitting, complete all as specified and as directed.

S & F in LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat shrink of 9W, complete all as specified and as directed. Make : CAT Part No : LHLDDBEBBI8R009 of havells or Equivalent of Crompton/Philips.

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5/6 amps flush type, complete all as specified and as directed.

Supply and fixing switch socket combination 2 – in – one 6 Pin , 5 / 16 amps flush type universal, complete all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal, complete all as specified and as directed.

Supply and fixing LED tube lights fitting, 4 feet long 1x 18W, 220V, AC decorative box type with holder including Removable poly cabonate LED tube light with inbuilt driver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable fitting, complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10W IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable fitting, complete all as specified and as directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 4 way 240 Volts AC, complete all as specified and as directed.

Supply and fixing MCB Single pole and neutral 40 Amps capacity 10 KA 240 Volts 50 HZ, 'C' curve, complete all as specified and as directed.

Supply and fixing MCB Single pole and neutral upto 32 Amps capacity 10 KA 240 Volts 50 HZ. conforming to IS/IEC 60898-1 2002, integrated label holder, Sliding bottom clamp, IP 20 protection, complete all as specified and as directed.

Supply and fix MCB single pole (SP), 10 kA of 6 -32 Amps capacity 240 Volts, 'C' curve, complete all as specified and as directed.

M&L for Sub main wiring with FRLS two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25/16 mm PVC cashing & capping medium grade ISI marked and conduit junction boxes, terminal boxes and incl all accessories fixed to the surface of wall/ceiling including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor, complete all as specified and as directed. NOTE : Two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size cashing & capping with accessories shall be measured as one length.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm, complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground (earth pit not less than 2.25m deep bellow ground level) with top edge of the plate not less than 1.5m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts, nuts, check nuts and washers, and connected to equipments as directed, including funnel with GI med grade watering pipe 20 mm bore, wire mesh, charcoal or coke and common salt in alternate layers of 15cm compacted thickness all around the earth electrode, with concrete pit in PCC (1:3:6) type C-1, 50 mm thick pre cast RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No.5 of MES SSR Part-I, complete all as specified and as directed.

S&F 1100 volts grade heavy duty PVC insulated stranded aluminium conductor cable of cross-sectional area 10 Sqmm size (one twin core cable flat or circular, served with inner sheathing of PVC tape and overall PVC sheathed) in service connections, suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire and testing on completion, complete all as specified and as directed.

Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 Core, including glands, lugs, nut, bolts, washers as required at site, testing, complete all as specified and as directed.

Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches, complete all as specified and as directed.

Supply and laying un-reinforced precast concrete cable cover class LV type 1 flat size 250mmx150mmx40mm laid in trenches for cable protection, complete all as specified and as directed.

S & F Steel pipe glavanized light grade of 40 mm dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth sstrip including clams with bolts nuts and wasers, complete all as specified and as directed.

S&F gun metal, globe or gate valves of 25 mm bore dia., with iron wheel head, screwed both ends for iron pipes and fixed including, complete all as specified and as directed.

S&F gun metal, globe or gate valves of 20 mm bore dia., with iron wheel head, screwed both ends for iron pipes and fixed including, complete all as specified and as directed.

S&F Rotational moulded polythene water storage tank ( cylindrical vertical with closed tops ) hoisted and fixed in position of 1000Ltrs capacity including tank cover and all necessary connection of tank nipple, complete all as specified and as directed.

S&F steel water tubing of the 25 mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground, complete all as specified and as directed.

S&F steel water tubing of the 20 mm bore sizes, ‘Medium grade’, galvanized, with all fittings; laid in trenches or on ground, complete all as specified and as directed.

S&F PVC float valve, high pressure with polythene float and fly nut complete screwed for PVC pipe and fixed in 20mm bore pipe, complete all as specified and as directed.

M&L for cutting, screwing the same for alterations or additions in position including refixing old steel tubing and connections in new or old position by means of equal 'T' of Reduced 'T' junction of dia upto 50mm, complete all as specified and as directed.

M&L for construction of angle iron stage made out of MS equal angle of suitable size of thick complete including fabricated work all as per directed at site, complete all as specified and as directed.

Note : In case of doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

DEEP CHANDRA JOSHI (BID ID -3372210)

RAJU TAMANG (BID ID -3372226)

APARAJITA GROUP OF CONSTRUCTION (BID ID -3372227)

PRASAD PRADHAN AND SON (BID ID -3364024)