REPAIR/REPLACEMENT OF SEWAGE LINE, CLEANING OF SEWAGE LINES AND SEPTIC TANKS, MANHOLE ETC IN ZONE -I AREA UNDER AGE B/R-I OF GE JAIPUR

Amount

M& L for comprehensively maintain the AOR of AGE B/R-I from all sewage probelems like desludging and cleaning of existing manholes of any size and shape any depth by removing all sludge, waste, debries etc from manholes and cleaning with water including disposing of all sludge, waste, debries etc outside MOD land. Cleaning of existing sewage lines of any dia of pipe line from manhole to manhole by manual/mechanical rodding and remove all sludge, waste, debris etc from line, manhole to manhole by jet pressure rodding sets mounted on sewage cleaning tractor / trucks including removing sludge, cleaning of all blockage of WC, bath, kitchen, WHB, traps, soil waste/ vent pipe (vertical or laid in trenches / floor ant type /size) by suitable means including foreign material from manholes , traps, pits where required complete all as specified and directed by Engr-in-charge. Note for Item No 01:- Contractor shall employ min 5 nos labour daily & extra manpower (if required on any day) to maintain the system. 2. All daily compalints (Including sunday and holiday) will be rectified within 24 hrs after raising the complaint, other wise 1200 Rs penal recovery shall be deducted from contractor payments. 3. Attendance register of labour prepared by contractor supervisior and put up to AGE B/R-I on daily basis.

Excavation in trenches not exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shaft , wells, cesspits, manholes, pier holes, etc n. exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed.

,---ditto--- all as per srl item No 3 above but depth exc 1.5m but not exc 3m complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft/ loose soil complete all as specified and directed.

Removing excavated material n.exc 50m & depositing where directed at a level n.exc 1.50m above the starting point in soil complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) 150mm dia set in cement mortar complete all as specified and directed.

,---ditto--- all as per item No 6 above but 200mm dia complete all as specified and directed.

Supply & laying DWC pipe (Double wall corrugated ) of class SN-4, IS-16098 (Part –II) of size internal dia of 150 mm, laid in trenches and jointed complete with coupler, bend, Tee, reducer etc complete all as specified & directed . Note : Earth work shall be measured and paid seperately

Supply & laying DWC pipe (Double wall corrugated ) of class SN-4, IS-16098 (Part –II) of size internal dia of 200 mm, laid in trenches and jointed complete with coupler, bend, Tee, reducer etc complete all as specified & directed . Note : Earth work shall be measured and paid seperately

Demolition of brick masonry / stone masonary built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M & L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius using old size brick built in CM 1:6 including raising height of man holes from ground level complete all as specified and directed.

M&L walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:4 complete all as specified and directed.

M & L rendering 15mm thick on stone masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.

M&L for providing cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in lintels upto 1.50m clear span, cills steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parpets and railing upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form works etc. complete all as directed and specified.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L precast RCC 1:2:4 type B-1, using 20mm graded stone aggregate for manhole cover including placing over manhole all as specified including demolition of old RCC manhole covers complete all as directed and specified. Note :- Reinforcement shall be measured and paid separately.

S&F Mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as directed and specified.

,---ditto--- all as per item No 18 but 6mm to 8mm dia complete all as specified and directed.

S&F Framed work such as doors, gates or frame for cooler stand of angle or other section with gusset plates, rails, braces etc, drilled for fixing of sheeting or other covering of door etc, to be prepared for hanging or sliding etc with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other coverings running rails and guides) conforming to Fe 410- W( Gde E-250) quality A and hanging and fixing complete all as specified.

Supply only intergal water proofing compound ISI marked complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe fixed in cement concrete type B-1, (1:2:4) complete all as specified & as directed.

Dismantling of cast iron drain pipe of 100mm bore, jointed in CM and taking out of trenches complete all as specified & as directed. Note :- Excavation & earth work shall be measured and paid separately.

Dismantling of cast iron drain pipe of 75mm bore, jointed in CM and taking out of trenches complete all as specified & as directed. Note :- Excavation & earth work shall be measured and paid separately.

S&F 75mm bore cast iron, sand cast soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 100mm bore cast iron, sand cast soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 100mm bore cast iron, sand cast soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, fixed on walls complete all as specified and directed.

S&F 75mm bore cast iron, sand cast soil, waste & vent pipe (ISI marked), in any length with or without ears fixed with cement joints, fixed on walls complete all as specified and directed.

S&F in repair 100mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed.

S&F in repair Cast Iron cowl 100mm bore fixed to CI pipe complete all as specified and directed.

S&F in repair SGSW gully trap square or round mouthed type 'P' of size 150mm x 150mm with CI grating including raising upto plinth protection with PCC 1:2:4 type B-1, and covered with stone slab complete all as specified and directed.

S&F as in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 580mm x 440mm with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap and flushing pipe antisyphonage pipe etc complete all as specified and directed. Note : Demolition of sunken floor treatment is included in this item.

S&F in repair PVC valveless, syphonic action type flushing cistern 10 litre capacity, low level, white with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low level or high density or PVC, 32 mm dia suitable for low level cistern complete all as specified and directed.

S & F in repair 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part I, complete all as specified and directed.

S & F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm dia (minimum weight 210 gms) complete all as specified and directed.

M&L for cleaning and removing all scale and dirt etc from tanks capacity exc 250 but not exc 500 ltr and from mouths of circulating pipes etc by using bleaching powder and replaced the float valve as existing size and type all as specified

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and as directed.

M&L for precast RCC soakage pit of effective depth of 8m and 750mm dia and wall thickness of 40mm constructed with precast RCC ring of 250 mm depth of each ring, including Earth work in any type of soil, PCC, incl provn of precast RCC cover complete all as specified and directed.

M&L for 100mm thick plain cement concrete (1:4:8), type D-2 (using 40mm graded stone aggregate) as in sub base finished even and fair complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with coloured cement and pigment laid over and including 25mm thick sand cushion layer complete all as specified and as directed. Note : Sand cushion shall not be paid seperately

,---dittio--- all as per srl item No 44 above but except tiles complete all as specified and as directed. Note : Sand cushion shall not be paid seperately

M&L rubber moulded chequered cement concrete tiles 20cm x 20cm x 25mm thick , set, jointed and pointed in neat cement slurry in floors with grey cement and pigment over and incl 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

,---dittio--- all as per srl item No 46 above but except tiles complete all as specified and as directed.

M&L for precast concrete kerb stones of cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L for Dholpur stone 16 to 18 mm cladding gang saw cut with macnine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one mumber SS clamps (grade-202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fasterner, polishing, rubbing & including silicon treatment complete all as specified and as directed.

S&F rolled mild steel work as in Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the lenght directed) and similar work conforming to Fe-290 GdeE-165 complete all as specified and as directed.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and contersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantiling posts or struts (wood, steel or R.C.C) any section, including taking out embedded portion and making good disturbed ground post embedded in natural ground complete all as specified and as directed.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

Dismantling galvanised chain link fencing of any description fixed to any type of fencing posts complete all as specified and directed.

M&L PCC 1:3:6 (Type C2) using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire. Note :- Supply only chain link fencing shall be measured and paid for separately.

Supply only mild steel galvanized chain link fencing 4mm dia of mesh wire, mesh size 100x100mm including line wires complete all as specified and as directed.

S&F galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc as directed. Note : Each line wire to be measured

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for chain link fening (in new or old) complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coarch screw and washer in roof, wall etc complete all as specified and directed.

M&L pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S & F steel work in tubular trusses incl special shaped washer etc, complete using ERW or induction butt welded tubes conforiming toIS 1161-1979 graded St-240 complete all as specified and directed.

M & L for preparing newly untreated steel surfaces of any descripton over 10 cm wiidth or girth and applying two coat of synthetic enamel paints over and incl a coat of red oxide primer complete all as specified and directed.

Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3084626)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3094824)

M/s KAKSI ENTERPRISES (BID ID -3084853)

PUSHPA G ENTERPRISES (BID ID -3090048)

J.J.ENGINEERING (BID ID -3089260)