CONSTRUCTION OF VANBHAVAN BUILDING INCLUDING ELECTRIFICATION AT CHANDRAPUR TA. AND DIST. CHANDRAPUR

Amount

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (a. Lift upto 1.5 m.)

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m. to 3.00m) By Mechanical Means

Excavation for foundation in Hard murum including removing the excavated material upto adistance of 50 metres beyond the building area and stacking and spreading as directed,dewatering,preparing the bed for the foundation and necessary back filling,ramming,watering including shoring and struttingetc.complete. (Lift from 1.50 to 3m.) By Mechanical Means

Providing soling using 80mm size trap metal in 15cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the back fill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 per cent of clorophyrifos per One Square Metre of vertical surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. BDW, As directed by Engineer incharge. (BDW/21.24)

Providing pre constructional anti termite treatment as per I.S . 6313 (Part-I) to the soil along the external face of building by punching holes of 1.2 of 1.5 C.M .diametre about 30-60 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 per cent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.

Removing grass, gazer grass and disposing off out of building premises including making In clean the ground by shovel and phavaras etc. complete. Bdw, As directed by Engineer in charge. (BDW/21.34)

Providing and laying Cast in situ/ Ready Mix cement concrete in M15 of trap/ granite/ quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Bd.E.4, Page Number 176/24.08)

Providing and laying Cast in situ/ Ready Mix cement concrete in M-35 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/ pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

GROUND FLOOR

1ST FLOOR

2ND FLOOR

3RD FLOOR

4TH FLOOR

5TH FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap/ granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCAD Aenabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

GROUND FLOOR LEVEL

FIRST FLOOR LEVLEL

SECOND FLOOR LEVEL

THIRD FLOOR LEVEL

FOURTH LEVEL

FIFTH FLOOR LEVEL

Providing and laying Cast in situ/ Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) R.C.C. WITHOUT MOULDING

Providing and laying Cast in situ/Ready Mixcement concrete M-35 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

GROUND FLOOR LEVEL

FIRST FLOOR LEVLEL

SECOND FLOOR LEVEL

THIRD FLOOR LEVEL

FOURTH LEVEL

FIFTH FLOOR LEVEL

Providing and laying Cast in situ/ Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) GROUND FLOOR

Providing and laying Cast in situ/Ready Mixcement concrete M-35 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

GROUND FLOOR LEVEL

FIRST FLOOR LEVLEL

SECOND FLOOR LEVEL

THIRD FLOOR LEVEL

FOURTH LEVEL

FIFTH FLOOR LEVEL

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) GROUND FLOOR

Providing and laying Cast in situ/Ready Mix cement concrete M-35 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

GROUND FLOOR LEVEL

FIRST FLOOR LEVLEL

SECOND FLOOR LEVEL

THIRD FLOOR LEVEL

FOURTH LEVEL

FIFTH FLOOR LEVEL

Providing and laying Cast in situ/Ready Mix cement concrete in M-35 of trap / quartzite/ granite/ gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honey combed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and laying Cast in situ/ Ready Mix cement concrete M-15 of trap/ granite/ quartzite/ gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (Murrum)

Filling in plinth and floors with approved excavated material in15cm.to20cm.Layers including watering and compacting etc. complete

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete.As director by engineer in charge and BDG- 2 and 5, (BDG/ 27.12) (Average ht of plinth beams 0.30m considered) BRICKWORK FOR PLINTH

Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete. As director by engineer incharge and BDG- 2 and 5, (BDG/27.13)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing Second class fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter/ two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. Bd.L.7 Page Number 153, (BDL 7/32.11)

GROUND FLOOR

FIFTH FLOOR (TERRACE)

Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. Bd.L.8 Page Number 153, (BDL 8/32.12)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing patti/ band Required 75 mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. BDL, As directed by Engineer in charge. (BDL/32.23)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing patti/ band Required 100 mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. BDL, As directed by Engineer in charge. (BDL/32.24)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing patti/ band Required 150 mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/ B.B.masonry and or tying by binding wire etc. complete. BDL, As directed by Engineer in charge. (BDL/32.26)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70 % by roller. (With prior approval of S.E.)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and applying Nerolac impression 24 carrat Luxury or equivalent approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface preparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC ) As directed by Engineer in charge, (COLOURING/48.15)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etc. complete

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding,preparing the surfaces.(excluding the primer coat.) etc. complete.

Providing and fixing 40mm diameter and 1.5mm thick Stain less steel hand railing in S.S. 304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50 mm dia.and vertical pipe of 38 mm dia at 0.60m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and all base of 75 mm dia above newel post of 75 mm dia meter etc.complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing 900 mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top, 40 mm diameter and 1.5 mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

FIRST FLOOR

THIRD FLOOR

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing and applying 2 Coats of 100% Pure acrylic water based paint with special heat reflectance property to withstand the harsh climate for period of atleast 10 years of approved make. Paint system should provide durable and long lasting finish with DFT of min 90 microns and should protect against concrete carbonation with R value of minimum 600 and equivalent concrete layer thickness value of min 150 cm. Paint should have breathability property and should be able to cover hairline cracks in the surface up to 0.5mm The paint has to be applied on a coat of high quality acrylic copolymer based alkali resistant primer with excellent penetrating properties including cleaning, with all leads and lifts at all levels etc complete, as directed by Engineer in charge.

FIRST FLOOR

SECOND FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item Number 15 to 18 prior approval of Superintending Engineer will be necessary. BDO, As directed by Engineer in charge, (BDO/35.26)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing and applying required coats of a water based UV resistant Evercrete Top Seal sealant to protect natural stone, bricks, concrete and wooden structures from water intrusion and staining due to water penetration and algue formation etc complete BDJ, As directed by Engineer in charge, (BDJ/31.15)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

Providing and fixing frame with/ without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete (Used without Oil Painting)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and applying two coats of lead/ zinc base oil paint/ bituminous paint of approved colour and shade to new wood work and fiber boards including preparing the surface, knotting, scaffolding if necessary, excluding primer coat etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing steel frame door of angle 40 x 40 x 5 mm with 16 mm dia. mild steel bars Horizontally at 10cm c/c for ventilator portion including iron hold fast for the fixing shutters including welding, painting, finishing etc. complete FIFTH FLOOR (TERRACE)

Solid Core Flush door Double lea fProviding and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter

Solid Core Flush door Double leaf Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick, decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved 1.5MM thick MICA on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) Commercial Hard Wood shutter. (Vineer replaced by MICA) (SSR CCOMPOSITE RATE)

Solid Core Flush door Single leaf- Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved face veneers on both faces with/without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings , finishing with french-polish/ waxing complete. (without door frame).(Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Solid Core Flush door Single leaf Providing and fixing factory made solid core flush door in single leaf 35 mm thick, decorative types, of exterior grade, as per detailed drawings, conforming to I.S.:2202 - 1962 (Revised) with approved 1.5MM thick MICA on both faces with/ without glazing and venetians in the positions shown on the drawings or as directed, all necessary beads, moulding and lipping, holdfasts, mat finish stainless steel fixtures fastenings, finishing with french-polish/ waxing complete. (without door frame). (Sample to be got approved from Ex.Engineer before use) Commercial Hard Wood shutter (Vineer replaced by MICA) (SSR CCOMPOSITE RATE)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. BD-T-34 Page No. 499, (BDT 34/39.09)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved MICA 1.5 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (Vineer replaced by MICA) (SSR COMPOSITE RATE) Page No. 246, (BDT-34/39.09)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the 'c' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing Hydraulic door closer at required position of standard approved make fixing as directed by engineer in charge etc all complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/ Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/ Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/ Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/ Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/ Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/ Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/ Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in Vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodizing without box.

Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/ Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/ Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/ Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/ Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in Vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising without box

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing and fixing in position aluminium openable window of any size as per detailed drawing and as directed by Engineer in charge with all necessary alluminium sections including necessary fixtures and fastening with 5 mm thick clear float glass etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing coloured anodising treatment to aluminium sections of the doors, windows, and ventilators including all the intermediate supports , side supports, screws and all the necessary fixtures with all leads, lifts, fixing charges etc. complete (Complete measurement on actual One Square Meterr basis of opening area shall be paid.)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50mm thick with 3mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

FOURTH FLOOR

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish, scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and laying telephone black/ Amba White/ Cadburybrown/ Ruby red/ Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including Vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two Vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m)

GROUND FLOOR

Providing and laying in position flooring of telephone black/ Amba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. (FLOORING & BASINS PLATFORM) (INCLUDING LABOUR RATE FOR HOLE OF BASIN)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite/ Amba White/ Cat bary brown/ RBI red/ Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. b) Both side polish

GROUND FLOOR

Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.

GROUND FLOOR

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. (A) FOR FLOORING

Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. (B) FOR SKIRTING

Providing and laying vitrified mirror/ glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.(SIZE SHOULD BE AS PER DIRECTED BY ENGINEER INCHARGE) A) FLOORING

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR (TERRACE)

Providing and laying vitrified mirror/ glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. B) SKIRTING, TOILET WALL, KITCHEN. (SIZE AS PER DIRECTED BY ENGINEER INCHARGE)

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and laying vitrified mirror/ glossy finish tiles decorative type having size 1200mm x 1800 mm of 10MM thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.(SIZE SHOULD BE AS PER DIRECTED BY ENGINEER INCHARGE) A) FLOORING

Providing and laying vitrified mirror/ glossy finish tiles having size 1200mm x 1800mm 10 mm thick and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. B) SKIRTING,TOILET WALL, KITCHEN. (SIZE AS PER DIRECTED BY ENGINEER INCHARGE)

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring,

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand)

Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22+/-2 mm thick bayer colour pigmented as per IS..1237-1980 having compressive strength more than 500Kilogram /sq. cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10% abrasion /wear resistance less than 2 mm, skid resistance more than 25.0 (AS TM:E303) and no fading as per DIN-51094 of size 300 x 300 in plan /designed pattern on a bed of 1:4 cement mortar including cement float,filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. For flooring

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. fifth Floor

Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc. as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete. Spec. One Number : As directed by Engineer-in-charge.

Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with Vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with5TH FLOOR (TERRACE)

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) CAR PARKING ROOFING &

Supply, fixing and installation of 4mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate)

GROUND FLOOR

Providing and fixing (450mmx550mm) in Square meter size as per drawing superior type Belgium mirror with16mmdia. nickel plated towel rod etc. complete. (Square Meter Size)

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing Mirror 40X50CM with Plastic frame DRIVER'S TOILETS AND GUARD QUARTER

ACOUSTICAL WALL PANELLING – FABRIC WRAPPED OF SIZE: 600X600/1200X25MM Providing and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%. Installation:An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600x600mm and 4 nos. in case of 600x1200mm. Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained

Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)

Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work)

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. morth 301/2.11/Page No. 160/ pwd ssr 2022-23

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 50m. to 300m. inclusive from the site of excavation to the site of deposition as directed.

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method and Grading - II Material

Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate confirming to IS: 383, the size of coarse aggregate not exceeding 25 mm, cement content not to be less than 150 kg/ Cum, optimum moisture content to be determined during trial length construction, concrete strength no t to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leds and lifts, laid with a paver with electronic sensor / by suitable means as approved by Engineer-in-charge, compactng with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete.

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a Tilting type Concrete Mixer as per approved mix design, admixtures, spreading, laying compacting and finished in a continuous operation without paver machine, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge

Providing and fixing in position TMT FE 500, 32 mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.

Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 mm dia. 70 cms.long and at 30.00 cm. C/C and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening , supported by assembly of TMT FE 500, chairs with proper alignment etc. complete.

Providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. Complete

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)

Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSI grade finely washed crushed sand) Confirming to IS 383, as per mixed in a batching and mixing plant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per sqm. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solids clear sealer @ 150 to 250 gms per sqm using surface roller and protecting from falling dust,dirt and curring by curring compound / by providing cement vata in cement Mortor 1 :8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary)

Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 450mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorizing glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.complete

Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)

Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ / ready mix controlled grade of M20 of trap /granite /quartzite /gneiss metal for RCC works in cut off walls / curtain walls including necessary scaffolding, centering, compacting by vibrator, finishing and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required specifications (VSI sand finely washed etc), excluding reinforcement)

Providing and laying in situ / ready mix M-20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate.

Providing and laying weep holes of 100 mm diameter AC/PVC pipes as per drawing for abutment returns, return walls etc. Complete

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and Fixing of Mineral Fibre Board Acoustical Suspended Ceiling System with ultima (BevelledTegular)Edge Tiles of size 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 99%, NRC0.7, Light Reflectance 85%, Thermal Conductivity k=0.052-0.057w/mK, ColourWhite, Fire Performance UK Class 0/Class 1 (BS476pt-6&7)in module size of 600x600x20mm, suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I. channel on XL2 Clip having aweb height of 32 mm with 15 mm wide T-section flanges colour white having rotary stitching on all T -sections i.e. the Main Runner, 1200mm and 600mm Cross Tees with aweb height of 32mm and aload carrying capacity of 7.7 Kilograms/M2 and minimum pullout strength of 100 Kilograms. The T-Sections have a Galvanizing of 90grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carrya 10 year warranty. products approved as per GRIHA and BS 476 etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

PROIVIDING AND FIXING ACOUSTICAL FALSE CEILING WITH 0.9 NRC: Sierra Mineral Fibre Acoustical Suspended Ceiling System with 15mm thick Sierra OP Tegular 15/90 Edge Tiles with Suprafine 15mm face exposed grid. The tiles shall have smooth laminated visual with Humidity Resistance (RH) of 95%, NRC0.90 (Average value of Absorption Co-efficient readings taken at 250Hz, 500Hz, 1000Hz and 2000Hz)as per ASTMC423 standard, CAC of 25 db as per ASTME1414, Light Reflectance ≥86% as per ASTME-1477, Thermal Conductivity λ=0.040W/mK, Colour Global White, Fire Performance of class A2-s1, d0 according to EN13501-1 with 15mm Tegular 15/90˚edge and 8mm drop in module size of 600x600mm. The scrim on the face of the tiles hall be cleanable and classified as ISO14644-1 clean room class 5. It shall be suitable for Green Building application, with Recycled content of 43% and VOCE missions (French)class of A+. The tile shall have Environmental Product Declaration as per ISO14025 and EN 15804+A2. The tile shall have certifications from GRIHA and Green Prothere by confirming that it is an environment friendly product. SUSPENSION: The tile shall be laid on Suprafine 38 with 15 mm wide T - section flanges colour global white (matching to tile color)having roll formed double stroke rotary stitching on all Tsections i.e. the Main Runner,1200mm&600mm Cross Tees with aweb height of 38mm (allsections). The deflection loading of the system shall be12.5kg/m2 (as per standard installation lay out mentioned below) and main beam tested as per ASTMC635 (DeflectionlimitlessthanL/360)with a deflection loading of 15kg/m. The end details of the cross tees hall be made of prehardened steel and fixed to the ends of the cross tee top rovide double locking between “cross tee to cross tee”and “cross tee to main beam”. All main beam to main beam and cross teet ocross tee connection shall have a pullout strength of more than 100kg. The T-Sections shall be made of hot dipped galvanized steel of 90gsm as per IS277(2003) and pre-painted steel with baked polyester paint with 0T bending capability. All border cross tee/main beam shall be levelled using perimeter fill.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Fine Fissured (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%,NRC 0.6, Light Reflectance 85%, Thermal Conductivity k = 0.052 -0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content of 31 %. The tile shall be laid on precoated G.I channel height of 32 with 15 mm wide T - section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57 Kilograms/M2 and pull out stength of minimum 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. product approved in GRIHA and BS 476 etc. complete. BDR/ 38.50/ PAGE NO.234/ PWD SSR 2022-23

Ground Floor

ACOUSTICAL GLASS FIBRE FALSE CEILING CLOUDS & SHAPES: Providing and Fixing Acoustical Clouds /Shapes-Acoustical clouds which are 30 mm thick, flat glass fibre panels of Humidity Resistance RH 95%, with embedded frame made of aluminium extruded section of 38X10mm of grade 6063-T6 as per dimension mentioned in below table for reinforcement and secured hanging. Embedded extrusion shall have grubslot with preinserted nutfor group hanging and connected using Aluminium die casted corner connector with ¼”–20 threading for hanging using cable adjust erforin dependent clouds. The form of Acoustica Clouds/Shapes-shall be Square/ Convex/ Concave/ Circle/ Hexagon/ Trapezoid/ Parallelogram (Left & Right) /Rectangle (Small & Large) in standard Traffic White color with light reflectance 90%as per ASTM1477-98 or in the color specified by the Architect/ Engineer incharge (Shell/ Tangerine/ Cranberry/ Moss/ Kiwi/ Reef/ Lagoon). The Acoustical Clouds/ Shapes shall be made of Glass fibre panel with density of 110-120Kgs/m3 along with acoustical sound absorbing scrimon the face to achieve sound absorption as per below mentioned table in accordance to ENISO354:2003 (average of 500-4000Hz). The face and edges shall be finished with matching water based texture paint. Shape Nominal Size and Sound Absorption – Metric Sabin1. Square 1170x1170mm - 2.48 Metric Sabin 2. Convex 1170x1140mm 2.28 Metric Sabin 3. Concave 1170x1140mm 1.94 Metric Sabin4. Circle 1170 Dia. 2.12 Metric Sabin 5. Hexagon 1170x1010mm 1.61Metric Sabin 6. Trapezoid 1170x1170mm2. 15 Metric Sabin 7.Left Parallelogram 1170x1170mm 2.15Metric Sabin 8.Right Parallelogram 1170x1170mm 2.15Metric Sabin. The panel shall be hung as per the following based on the installation. Individual Suspension-The panel shall be hung using deck hanging kit comprising of griper structure anchor & capofdia. 20mm, spring loaded bottom end cable adjuster of dia.9mm and 2.4m long aircraft cable of 1/16”dia. The One Number of deck hanger will be as per Table 1 above.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

FALSE CEILING SYSTEM GI METAL BIO GUARD CLIP IN PLAIN TILE WITH CARRIER SYSTEM 600 X 600MM Providing & Fixing horizontal level suspended ceiling comprising of GI Bioguard Clip-in Plain Tile 600x600mm (NominalSize)tiles of 120gsm galvanized steel as per IS 277 (2003) suitable for architectural finishes in 0.5mm thickness as per in IS:513(1994)in Global white color with concealed suspension system having abevell ededge of 3x3mm and height of 33 mm on one side and 18mm on the other side. Tiles shall be flattened by precision levellerto minimize sagto less than 1/400mm. The tiles shall have double round pipe of ɸ2mm and ɸ6mm for secure engagement and levelling respectively, along with swing down feature and special tabs to allowre moval of tile to enable plenum access. The coated surface of the tile shall exhibitanti-microbial properties (eradication and inhibition of growth)and shall achieve upto 99.99%reduction in bacterial activity as per ISO22196:2011. The tile shall be electro statically polyester powder coated using RoHS compliant powder having coating thickness ranging from 60-80 microns. The powder coating shall pass Salt Spray Testfor 750 Hours as per ASTMB117,QUV–ATest for 1000 hours as per ASTMG-154–(Cycle–1) and Humidity test for 1000 hours as per DIN50017. The powder coating shall have an adhesion of GT0 as per ENISO2409. The shade variation across batches shall be delta E<1 using Excite/ BYKG ard nerinstrument and gloss level of 25±5% at 60˚as per ASTMD523. The tile shall have scratch, mar & abrasive resistance properties. The tile shall have a Light Reflectance of ≥63% in accordance to ASTM1477-98 and Fire Performance of class 0/1 as per BS476 Part 6 & 7 in module size of 600x600mm. SUSPENSION & INSTALLATION: Shall comprise of 3000mm long ‘C’ channels of 38Hx12Wmm and 1mm thick spaced at 1200mm centre to centre securely fixed to the structural so ffitusing threaded rod (Approved make/Third Party Supply) connecting to C-channel hanger of 109x18.5x16.5mm at 1200mm C/C and anchor fastener (Approved make/Third Party Supply).The last hanger attheend of each C-channel shall not be greater than 600mm from the adjacent wall. Use a C-channel connector of 99.5x35x9mm for splicing together two pieces of C-channels. 4000mm Clip-inbar of16Wx40Hmm and 0.6mm thick made of galvanized steel of 140gsm as IS 277 (2003) and shall be

Ground Floor

Second Floor

CHANNELLED WALL PANELLING OF SIZE: 192X2400X15MM Providing and Fixing Channelled perforated panels of width 192mm, thickness of 15mm and length 2400 mm, made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm or 21mm of visible pane (G-13/ G-21). The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.5. for G-21 and 0.6 for G-13. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mOne Metric Tonnehe panels shall be mounted on special aluminium splines (keel) using inside clips provided by Manufacturer and approved by the Architect/ Engineer-in-Charge. Installation: An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface for fixing Keel. Install Keel vertically using screws and plugs at spacing of not more than 600mm centre-to-centre. The first and last keel should not be more than 150mm from the ends. Trim the tongue of the first bottom panel and install using headless nail with groove side upward. Subsequent panels are installed with tongue side downward by engaging with each other using tongue and groove mechanism and secured by inside clip. Continue this process until required height is achieved. Shorter butt edges need to be joined using industrial/wood glue. The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge. Finish off the edges using wooden moulding of matching colour (by others). Installation should be carried out as per Manufacturer recommended procedure.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

NATURAL BAMBOO CEILING: Providing & fixing of Wooden Grill panel with backer made of natural bamboo with 24mm Face black exposed grid. The Grill panels shall be made of rapidly renewable natural bamboo core having density 600+Kgs/m3 as per BS EN323 (1993) and bending strength of 96+ N/mm2 as per BS EN310 (1993). The Grill panel shall have a seven layer UV coating of thickness 0.09-0.11mm as per BS EN71 finished to natural or carbonized shades. The Grill panel shall be of nominal size 35x300x2400mm comprising 8 blades/slats of 35x16x2376mm with centre to centre spacing of 37.5mm fixed through Backer of size 12x22x300mm having centre to centre spacing of 300mm and additional end backers at 150mm from both the edges. The Grill panel shall have a fire performance of Class A according to ASTM-E84. The Grill panel shall have moisture content of 8-14% as per IS 1708 (Part 1):1986 and a Humidity Resistance (RH) of 70%. SUSPENSION: The tile shall be installed on 24 mm wide T - section flanges having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 43mm, 35mm and 30mm respectively. The deflection loading of the system shall be 17.8 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 21.4kg/m. The end details of the main beam and cross tee shall be made of pre hardened steel fixed to the ends. The cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 100 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with 0T bending capability. All exposed panel ends to be covered using edge caps. All wall angles to be covered using ledgers. Installation should be carried out as per Manufacturer recommended procedure. The grid shall be installed with suspension system of recommended make.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Alluminium foldable ladder for store. Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht.

Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Terrace Floor

Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and One Number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Terrace Floor

Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.

Providing, laying and fixing P.V.C. pipe of 50mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

Providing and constructing Brick Masonry Inspection Chamber 90cmx45cmx90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed incement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete.

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing etc. complete. (prior approval of sample and brand by Ex. Engineer is necessary before use)

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Grab bars-Providing SS grab bars set for accessible toilets comprising of 4 nos. Grab bars as specified below.(1 nos. wing grab bar + 1 nos. L shaped grab bar + 2 nos. straight grab bars = 1 typical set) 27a) Swing grab bar (1 NOS). Providing a S.S. 304 SWING HANDICAP GRAB BAR - 700 mm and of DIA: 32MM and thickness 1.5mm of the roved brand and make. 27b) L Shaped grab bar (1 NOS) Providing S.S. 304 L SHAPED DISABLED GRAB BAR of IZE-600MM (H) X 600MM (D) and 32MM DIA. and thickness mm of the approved brand and make. 27c) Straight grab bar (2 NOS) Providing S.STEEL 304 GRAB RAIL (600 MM),32MM DIA. and thickness 1.5mm of the approved brand and make.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing white glazed earthenware lipped flat back/corner type Urinal with PVC 5 liters flushing cistern with fittings, inlet pipe with stop tap, brackets for fixing the cistern, 32 mm diameter P.V.C. flush pipe with fitting including lead soil pipe, lead trap and soil pipe connection up to the outside face of wall.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, with pillar cock, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.

Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing C.P. Two way BIB cock of approved make continental including necessary sockets/union nut etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing C.P.Handshower (health faucet) 1m.PVC tube with wall hook jaquar make (Cat. No. ALD 563 ). complete as directed by Engineer in charge.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Terrace Floor

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Terrace Floor

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Terrace Floor

Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.

Terrace Floor

Providing and fixing BALL COCK FOR 40 MM DIA

Terrace Floor

Providing and fixing on walls/ ceiling/ floor 50 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.

Terrace Floor

Providing and fixing on walls /ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

PROVIDING AND FIXING AS PER LOCAION IN DRAWINGS C.I.Man hole cover 50 kg. INCLUDING ALL ETC COMPLETE. AS PER THE INSTRUCTION OF ENGINEER INCHARGE

Terrace Floor

PROVIDING AND FIXING Mosquito proof coupling AT TERRACE TANK LEVEL AS PER THE INSTRUCTION OF ENGINEER INCHARGE

TERRACE

RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge

Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to In Rs. Vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints Horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete)

Providing and applying required coats of a water based Evercrete Deep Penetrating Sealer (DPS) on cement concrete surface like roads, beams, and columns, plastered walls, basements, roofs, potable water tanks etc to react with cement and to penetrate concrete structure thereby making it resistant to chemicals / chlorides water to make it dust proof and to act as a water resistant at the same time which Strengthens the treated surface and reduce the curing period etc complete. - Note -- for item Number 7 to 4 prior approval of Superintending Engineer will be necessary

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FIFTH FLOOR

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing Water proofing treatment to newly laid fully cured concrete slab of terraces by applying first coat of polymer modified semi-viscous paste prepared by mixing polymer of approved make and Cement in 1 : 2 proportion ( 1 litre polymer : 2 Kg. Cement) to a neatly cleaned and dust free concrete surface and upto 300 mm. over parapet wall prepared by removing loose and deposited material with brush and water, laying glass fibre mesh of 10 x 10 specification of approved make over tacky surface of first coat of polymer followed by second coat in transverse direction, sprinkling coarse sand over it, followed by protective mechanical cover water proof plaster 20 mm thick after sufficient curing apply IPS 40 mm to 75 mm. thick cement concrete of 1:2:3 proportion using coarse aggregate of 10 MSA and water proofing compound of approved make and polypropylene fibres @ 125 gm per bag of cement making groovr 3 to 4 mm wide & 10 mm deep in concrete, in pannels of 3m/4m or as per site condition & filling the joints with poly sulphide sealant after curing including providing holler with drip moulds at the junction and finishing the concrete surface with neat cement slurry, as directed and ponding the surface as directed etc.complete ; covering 10 years guarantee against leakproofness on court Fee stamp paper of Rs 100/-

FIRST FLOOR

SECOND FLOOR

FOURTH FLOOR

FIFTH FLOOR

Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint)

Providing and applying Flex Stone Vertical Stamping texture on wall/ R.C.C structure with stone colour on plastered vertical faces of walls of brick, concrete surface as per the standard specification for including primer, making grooves for patterns, filling the joints/ grooves with approved quality adhesive of required thickness as per the site condition, cleaning the finished surface, any surplus glue or dirt, dust properly. The item includes all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site, curing, rectification as per suggestions, cleaning the site material etc. complete as directed by Engineer - In - Charge. (Lead should be added on approved rate as per CSR )

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Fifth floor

Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.

Dry wall cladding with clay tile; Designing, supplying and fixing of Clay tile of Wienerberger (Red Series or Grey Series) or Equivalent with suitable size and thickness not less than 20 mm as per manufacturer with approved colour and pattern with composition of finest powdered clay and colour mixtures. The clay tile shall be fixed on the suitable farming system by using continuous aluminium profiled section as per manufacturer with suitable size and spacing to withstand the structural design criteria specifled in the technical specification by using necessary HDG brackets, SS316 grade anchor bolts etc as per manufacturer specification. Cladding joints should be with open groove system. with prior approval of concerned Superitending Engineer.

Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete.

Providing and Fixing Processed Stone Cladding on wall surface/ plywood surface. RCC pardi/ Wall and all type of Interior, Exterior Compound wall and Gate etc. of cladding processed stone with material of Processed clay, Wooden chips, Silica sand, Cement, GFRC admixtures, Colour pigments, Fiber up to thick of 230 mm/ 25 mm including scaffolding, fixing of screw, etc. (As directed by Engineer in Charge)

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Providing and fixing textured wall paper of approved make and quality to walls including surface making, adhesive, scaffolding, making all other surfaces in good, floor cleaning etc all complete.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and Fixing 12mm thick Toughend Glass in opening / in frame or as required with scaffolding, installation, hardware and silicon, including accessories, cost of all material, fixtures, Carpenter, Skilled, Semiskilled helper, labour, transportation at site. etc. as directed by Engineer - In - Charge.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and supplying GRC Baluster of Railing of 750MM height including finishing etc. complete as per detailed design and drawing. Including cost of all material, fixtures, Carpenter, Mason, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and supplying GRC coping of size 230 x 530MM including molding, finishing etc. complete as per detailed design and drawing. Including cost of all material, fixtures, Carpenter, Mason, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and Fixing 12mm thick toughened Glass openable door including S. S. pipe handle of 35mm size. High quality locking arrangement, door stopper, pivot of appropriate size, required hardware, All fittings and fixtures of Dorma company or equivalent including scaffolding, installation at site in groove of granite jam lining with tansportation PVC tube and silicon etc all complete. Including cost of all material, fixtures, Carpenter, Skilled, Semiskilled helper, labour, transportation at site, open close signs etc. as directed by Engineer - In - Charge.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing 90cmx60cm Granite plate engraving 10cm. Heightletter, figures including painting the lefters/ figures with approved colour and shade complete. Size as per sq.m..as per the instruction of engineer incharge.

Providing and Fixing DOUBLE SHUTTER SLIDING DOOR with 12mm thick toughend glass with motion sensor for the automatically operation of door including S. S. pipe handles of 35mm size, locking arrangement, door stoper, Sliding chanells, rollers of appropriate size, equired hardware, All fittings and fixtures of Dorma company or equivalent including scaffolding, installation at site in groove of granite jam lining with tansportation PVC tube and silicon etc all complete. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, open close signs etc. as directed by Engineer - In - Charge.

GROUND FLOOR SGD

FIRST FLOOR SGD

SECOND FLOOR SGD

THIRD FLOOR SGD

FOURTH FLOOR SGD

Providing and constructing POROTHERM / Exposed brick for non load bearing wall with 200mm. Horizontally perforated clay hollow blocks with compressive strength not less than 35 Kg/Sq.cm., U value of 1.0 W/m2K, Water Absorption of 15%, masonry to be done using sand cement mortar 1:6 with blocks of size 400mm x 200mm x 200mm (12.5 bricks per Sqm. excluding mortar joint thickness) including cost of materials, labour charges, scaffolding, curing at all heights, complete as per specifications & directions of Engineer-in Charge. Cost shall be inclusive of filling the Blocks with Cement mortar at exposed junctions and filling with concrete using 12mm down size aggregates at Window and door Jambs for fixing hold fast, anchors etc. It must be green building certification from IGBC and Griha and should comply IS code 3952. Including cost of all material, fixtures, Mason, Skilled, Semiskilled helper, labour, transportation of material at work site etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

Providing and fixing in position structural glazing consisting of main frame of powder coated jindal or equivalent make alluminium curain wall section 48 x 48 mm &sub frame of 25 x 25 x 2 mm powder coated alluminium SHS by using structural silicon of Dow Corring 995 weather silicon coirining 785, Spacer tape 6 mm x 6 mm. Including glass of required thickness, sun protective film of standard make with high solar energy rejection, Including cost of all material, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at work site etc. complete as directed by Engineer - In - Charge. (Lead should be added on approved rate as per CSR )

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and Fixing Signboard with S.S. Lettering for name, information, signs at exterior / interior portion including cutting of letter, fixing on approriate size of plate etc. Including cost of all material, fixtures, Artist, Skilled, Semiskilled helper, labour, transportation of material at work site etc. complete as directed by Engineer - In - Charge. FOURTH FLOOR

ENGLISH WORD

MARATHI/HINDI

ADMIRAL TABLE@2600LX2350DX750HT WITH REAR STORAGE @2100LX450DX2000HT ( FOR HOD CABIN )Providing, making, Supplying, fixing and intallation of ADMIRAL TABLE of size 2600L x 2350D x 750H with rear storage of size 2100L x 450D x 2000H Office table with a robust structure, good stability, and a curved edge for a classic look with leveling adjustment to adjust with an uneven floor surface. With Table Main Top of 36mm thick curved shape made up of PVC foiled MDF in classic oak colour with curved edge which provide a classic look to the table. The table top is been supported with M.S. horizontal understructure of size 50mm x 20mm x 1.20mm thickness which is powder coated to prevent it from any reaction by air. Leghs wth plus shape configuration of the leg is divided into two assemblies i.e upper gable end assembly and lower gable end assembly. The overall thickness of the gable end is 50mm which is made up MDF with proper profile wrapping on it. The overall dimension of plus shape configuration leg is of 625W x 704H x 50mm thickness. Out of 704mm height of leg, the below 75mm height is of dark shade i.e slate grey colour which provides an elegant duel colour finish to the leg. The leg provide complete support to the table top and can be sustain heavy loads. With slant modesty panel of dark shade i.e slate grey colour is made up of 18mm thick pre-laminated particle board. The dark shade modesty and light shade tabletop provides and elegant duel colour finish to the tabletop for Detailed wording of Item refer Tender Book lete

CHIEF TABLE @2100LC2100DX750HT @900LX450DX1800HT2 NOS/900LX450DX670HT) Providing, making, Supplying, fixing and intallation of CHIEF TABLE of size 2100L x 2100D x 750HT and 900L x 450D x 1800HT2 NOS/900L x 450D x 670HT table top- It is 25 mm thick batten structure made up of 12 mm BSR prelam MDF batten with 12mm OSR prelam MDF board confirming the grade SBG II of IS 12406/Latest, and 0.4 mm thick PVC foil is stick from the bottom side.4mm thick extra clear glass with PU painted from bottom side. Glass is placed above the cabin table top. Understructure- Is consisting of welded frame which is supported by gable end and return storage. Welded frame is made up of vertical and horizontal member having size of 50x25x1.6 mm thick M.S. pipe confirming IS-Grade 4932 powder coated finish up to 50 to 60 Micron. 100x50x3mm thick CRCA sheet confirming IS grade IS 513:2008, is welded on vertical member of frame. Gable end is made up of 25mm thick BSR MDF board confirming the grade SBG II of IS 12406/Latest with 0.4 mm thick PVC foil is stick from inner side. Return storage Main body-storage top is made up of 25mm BSL prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Bottom Panel should be made up of 25mm Thick BSL prelam particle board confirming to IS 12823: 1990 with 0.4mm thick PVC lipping glued with Kliberit-779.6 glue for Detailed wording of Item refer Tender Book lete

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

WRAP TABLE @ 1800LX900DX750HT WITH SIDE STORAGE 900WX460DX750H & REAR STORAGE 1650WX350DX785H Providing, Supplying, fixing and intallation SOS or equilvalent Make Wrap Cabin Table top is made up of 37mm thick dual color edge in Sandwich of 25 thk Prelam particle board and 12 mm thk BSL Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. for Detailed wording of Item refer Tender Book lete

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH

FREE STANDING TABLE @1800LX750DX750HT (WITH METAL PEDESTAL PRELAM FASCIA . KEYBOARD TREY & CPU TROLLEY) Providing, Supplying, fixing and intallation of SOS or equilvalent Make Free Standing Table of size 1800Lx750Dx750Ht (With Metal Pedestal Prelam Fascia . Keyboard Trey & Cpu Trolley) with Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Understructure- Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm. Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. for Detailed wording of Item refer Tender Book lete

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and intallation of OPENABLE STORAGE of size1050L x 450D x 750HT with storage Top- Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL. for Detailed wording of Item refer Tender Book lete

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

FREE STANDING TABLE @1200LX600DX75HT (WITH METAL PEDESTAL PRELAM FASCIA . KEYBOARD TREY & CPU TROLLEY) Providing, Supplying, fixing and intallation of SOS or equilvalent Make Free Standing of size 1200L x 600D x 750H ((With Metal Pedestal Prelam Fascia . Keyboard Trey & Cpu Trolley) with Work Top - Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Understructure- Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm. INCLUDING Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. Supply, Fitting & Fixing of SOS Make Metal storage.for Detailed wording of Item refer Tender Book lete

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

U SHAPE CONFERENCE TABLE @4800LX3000DX750HT Providing, Supplying, fixing and intallation of SOS or equilvalent Make U SHAPED CONFERENCE TABLE of size 4800L x 3000Dx 750H with Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Work top shape can be a round or rectangular. Understructure-Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top standard. Wire management- Electrical wires shall be carried from 100x100mm vertical duct or Snake (Vertigo), vertical duct shall be made of 0.7mm CRCA sheet confirming to IS 513:2008.Horizontally wire shall float in switch mounted box 400LX174DX125H shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Switch plate is provided on Switch Mounting Box. INCLUDING Switch Plate shall be made up of 1.5mm CRCA sheet confirming to IS 513:2008 and switch plate can be screwed on switch mounting box or cable tray by using 8x15 mm Pan Head ST Screw. Access flap will be fitted on work top above to the switch mounting box. Access flap and its components shall be made of aluminum extrusions of material AL6963-T6. The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. Including all hardware, all fittings and fixtures cost of all material, Carpenter, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.for Detailed wording of Item refer Tender Book lete

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

FOURTH FLOOR

U SHAPE CONFERENCE TABLE @4800LX3000DX750HT Providing, Supplying, fixing and intallation of SOS or equilvalent Make U SHAPE CONFERENCE TABLE of Size 10500L x 5400D x 750H with Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Work top shape can be a round or rectangular. Understructure-Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top standard. Wire management- Electrical wires shall be carried from 100x100mm vertical duct or Snake (Vertigo), vertical duct shall be made of 0.7mm CRCA sheet confirming to IS 513:2008.Horizontally wire shall float in switch mounted box 400LX174DX125H shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Switch plate is provided on Switch Mounting Box. INCLUDING witch Plate shall be made up of 1.5mm CRCA sheet confirming to IS 513:2008 and switch plate can be screwed on switch mounting box or cable tray by using 8x15 mm Pan Head ST Screw. Access flap will be fitted on work top above to the switch mounting box. Access flap and its components shall be made of aluminum extrusions of material AL6963-T6. The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. Including all hardware, all fittings and fixtures cost of all material, Carpenter, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge..for Detailed wording of Item refer Tender Book lete

Providing, Supplying, fixing and intallation of OPENABLE STORAGE of size 900L x 450D x 750H with storage Top- Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL..for Detailed wording of Item refer Tender Book lete

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

METAL STORAGE @900LX450DX1980HT Providing, Supplying, fixing and intallation of SOS or equilvalent MakeMETAL STORAGE of size 900L x 450D s 1980H. Storage body- The construction and material of storage body shall be of 0.8mm thick CRCA and skirting shall be of 1.2mm thick CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron. The storage top shall be made up of 2mm thick CRCA sheet with 0.7 mm thick CRCA sheet T-HAT for extra support. Shelf shall be made up of 0.8mm CRCA sheet confirming to IS 513: 2008 with 0.8mm Thick CRCA sheet T-HAT is given for extra support. Shelf shall be mounted with the Metal shelf support pin made of 2mm thick CRCA sheet with Nickel or Chrome plating. Load bearing capacity of the shelf shall be 30Kgs UDL. The construction shall be aesthetically appealing completely welded. M10 screw leveler is given with height adjustment up to 12mm to 15mm. Metal Shutter- Shall be made up of 0.8mm CRCA sheet confirming to IS 513: 2008 with powder coated finish up to 50 to 60 Micron and 0.8 mm CRCA sheet T- HAT is given for extra support and to screw hinges on shutter. Shutter is hinged shutter with equal width hung with 0 Crank on side panel. Multipurpose square lock is used to lock the shutter. PVC flush handles are used in metal shutter. Prelam Shutter-Shall be made up of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue..for Detailed wording of Item refer Tender Book lete

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

CAFÉ TABLE @1200LX750DX750HT Providing, Supplying, fixing and intallation of CAFÉ TABLE of Size 1200L x 750D x 750H Café Top –Is made up of Work top shall be made 25mm thick or 18mm Thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section.for Detailed wording of Item refer Tender Book lete

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

CAFÉ TABLE @900LX900DX750HT Providing, Supplying, fixing and intallation of Café Top – Is made up of Work top shall be made 25mm thick or 18mm Thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section.for Detailed wording of Item refer Tender Book let

Providing, Supplying, fixing and intallation of SOS make or equvilant 2 BAY / SINGLE FACE FIX UNIT Compactor Storage System with Main Body: Rigid Knock Down construction made out of 0.8mm thk. CRCA Steel conforming to IS: 513 Grade. Each body block (SFF/SFM/DFM) building consists of 1 Main unit & then Add-on units (0, 1, 2, 3, 4 - depending on no. of bays 1, 2, 3, 4 & 5). Each unit has 5 loading levels formed by 4 nos. adjustable shelves. Body units are bolted to undercarriage. for Detailed wording of Item refer Tender Book let

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and intallation of SOS make or equvilant 2 BAY / SINGLE FACE MOBILE UNIT Compactor Storage System with Main Body: Rigid Knock Down construction made out of 0.8mm thk. CRCA Steel conforming to IS: 513 Grade. Each body block (SFF/SFM/DFM) building consists of 1 Main unit & then Add-on units (0, 1, 2, 3, 4 - depending on no. of bays 1, 2, 3, 4 & 5). Each unit has 5 loading levels formed by 4 nos. adjustable shelves. Body units are bolted to undercarriage. for Detailed wording of Item refer Tender Book let

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and intallation of SOS make or equvilant 2 BAY / SINGLE FACE MOBILE UNIT Compactor Storage System with Main Body: Rigid Knock Down construction made out of 0.8mm thk. CRCA Steel conforming to IS: 513 Grade. Each body block (SFF/SFM/DFM) building consists of 1 Main unit & then Add-on units (0, 1, 2, 3, 4 - depending on no. of bays 1, 2, 3, 4 & 5). Each unit has 5 loading levels formed by 4 nos. adjustable shelves. Body units are bolted to undercarriage.for Detailed wording of Item refer Tender Book let

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and intallation of COMPACTOR FLOOR RAIL (for single rail) mounted on floor for resting, moving and operating Compators. Including all hardware, all fittings and fixtures cost of all material, Skilled, Semiskilled helper, labour, transportation at work site etc. completed as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

CHIAR HB ( FOR HOD CABIN ) Providing & fixing in position, high class, heavy duty fully upholstered High back chair for Head of office of size 650 mm. Height of back should be less than 1200 mm with Leatherette back and bottom having Aluminium Diecast armrest with cushion pad Knee tilt mechanism with multi position locking 700mm Aluminium Diecast base with 60mm nylon casters & class 4 gaslift. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at work site etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

VISITOR ( FOR HOD CABIN )Providing, Supplying, fixing and intallation of Visitor Chair of size Height-950mm, Seat Size 450 mm (W) X 450 mm (D), Backrest Size 500mm(H) x 450mm (W) Understructure made up of MS of Ø25.4 X 2mm thk Pipe powder coated with black color. BACKREST: The Back is made up of 12mm thick (7 layers) hot pressed plywood and moulded foam thickness 40 mm upholstered with fabric. The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric.Density (IS-7888-1976) : 50-55 Kg/m3. with Arm Pad is injection moulded from Black polyurethane - size 250mm (L) x 50mm (W). size. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

CHAIR HB (FOR ASS HEAD /ADMINISTRATIVE OFFICE/ SUPRITENDENT OFFICER)/ MEETING HALL Providing, Supplying, fixing and intallation of High back Chair of size Overall height -1230 mm, width - 660 mm, Seat Height - 540 mm, Back Height - 690 mm, Seat Width - 485 mm. Head rest should be provided for high back. Head rest should be height adjustable. Back rest should be made up of HR foam on 12 mm ply with fabric upholstery covered with fabric. Back rest shoud have inbuilt lumbar support. Back rest to be tested with 45 Kg, 120000 cycles @ 10-30 cycles / min. Seat should be made of HR Foam fitted on 12 mm ply with fabric upholstery and plastic cover and should have waterfall edge for ergonomic seating. Seat Depth adjustment should be provided. Seatrest should be tested with 55 kg on seat, 120000 cycles @ 10-30 cycles / min Mechanism - Mechanism should be synchrony with 1:3 ratio. It should have Automatic weight sensing mechanism with seat slide. The return force of the backrest is adjusted automatically by the users body weight. It should have 4 point locking positions for b for Detailed wording of Item please refer Tender Booklet

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

VISITOR ( FOR HOD CABIN )/MEETING HALLProviding, Supplying, fixing and intallation of Visitor Chair of size Overall Height-950mm, Seat Size 450 mm (W) x 450 mm (D), Backrest Size 500mm(H)x 450m Understructure made up of MS of Ø25.4 x 2mm thk Pipe powder coated with black color.BACKREST:The Back is made up of 12mm thick (7 layers) hot pressed plywood and moulded foam thickness 40 mm upholstered with fabric. The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric. Density (IS-7888-1976) : 50-55 Kg/m3. ARM PAD: FIXED ARM : The arm pad is injection moulded from Black polyurethane - size 250mm (L) x 50mm (W). Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at siteetc. as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

CHAIR HB ( FOR 1800L CABIN TABLE) Providing, Supplying, fixing and intallation of High back Chair (For CHAIR HB FOR 1800L CABIN TABLE X LINE MB) of size Back rest should be made up of mesh having 100% Polyester. Back rest shoud have adjustable lumbar support. Back design should have a X kind of support for better comfort. Back rest to be tested with 45 Kg, 120000 cycles @ 10-30 cycles / min. Seat should be made of HR Foam fitted on 12 mm ply with fabric upholstery and plastic cover and should have waterfall edge for ergonomic seating. Seat Depth adjustment should be provided. Seatrest should be tested with 55 kg on seat, 120000 cycles @ 10-30 cycles / min Mechanism - Mechanism should be synchrony with 1:3 ratio. It should have Automatic weight sensing mechanism with seat slide. The return force of the backrest is adjusted automatically by the users body weight. It should have 4 point locking positions for backrest. It should be BIFMA Compliant and tested with 109 kg on seat for 3,00,000 Cycles. for Detailed wording of Item please refer Tender Booklet

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

CHAIR VISITOR ( FOR 1800L CABIN TABLE) Providing, Supplying, fixing and intallation of Visitor Chair (VISITOR FOR 1800L CABIN TABLE UNIT) Chair Dimension-Overall Height-830mm Seat Size -495mm(W) x 495mm(D), Backrest Size-385mm(H) x 480 mm (W). Understructure is made up of Diameter 25.4 x 1.6 mm thk , Diameter 22 x 2 mm thk and diameter 19 x 2 mm thk MS tube welded together. Powder Coating in Black Colour having DFT – 50 to 80 micron. BACKREST: The frame of back rest made up of injection moulded in black PA +30 % GF and upholstered with mesh fabric make then assembled with outer frame. SEAT:The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric. Seat Size 495 mm (W) X 495 mm (D). SEAT FOAM:Foam made out of moulded Polyurethane foam with the following properties: for Detailed wording of Item please refer Tender Booklet

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and intallation of High back Chair of size (FOR 1800L CUBICLE TABLE & FST 1200L) with Backrest : Mid back. Upholstery : Backrest : Mesh (Black), Seat : Fabric (Black, Grey, Blue, Red), Armrest : Fixed PP, 1D PP Armrest, Mechanism : Synchro 1P. (Seat and Back Synchronised Mechanism with 1 point back angle Locking positions). Gaslift : Class 4, 112mm Stroke. Base : Nylon Dia 660mm. Castor : Nylon, Dia 60mm. Lumber. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

SPARK G ( FOR CONFERENCE ) Providing, Supplying, fixing and intallation of SPARK G ( FOR CONFERENCE ) Backrest : Mid back. Upholstery : Backrest : Mesh (Black). Seat : Fabric Grey, ), Armrest :1D PP Armrest. Mechanism : Synchro 1P. Gaslift : Class 4, 112mm Stroke. Base : Chrome Base, Castor : Nylon, Dia 60mm. with Lumber support. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

FOURTH FLOOR

KLIK TRAINING ( FOR COMPUTER ROOM ) Providing, Supplying, fixing and intallation of KLIK TRAINING (FOR COMPUTER ROOM) Klik Training (With Pad) UNDERSTRUCTURE: The Understructure is made up of Diameter 16 x 2 mm thk MS pipe with chrome plated finish. SHELL: The shell of dimension 450(W) x 400(H) is made from moulded polypropylene. TABLET :Tablet (writing pad) is made up of injection moulded from black polypropylene with a pen holder and bottle holder arrangement. Tablet size is 375mm (L) x 275mm (D) x 12mm (T). The tablet has an aluminium die cast mechanism. ARM REST: The arm rest made up of injection moulded from polypropylene - size 190mm (L) x 60mm (W). CASTORS: NYLON CASTORS: The twin wheel castors are injection moulded in Nylon-6 and diameter of Castor 50 mm. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

Providing, Supplying, fixing and intallation of SOFA RELAX 1 SEATER / LEATHERETTE FINISH / SS LEGS of size L=900mm x D=750mm x H=885mm made up of Frame : The sofa’s frame is made from solid, sustainable wood and commercial ply Upholstery: Leatherette upholstered cushions and seat, Base-frame: 40x20x2mm thick with SS pipe, Base frame finish: Powder coating (black) Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

SOFA RELAX 2 SEATER / LEATHERETTE FINISH / SS LEGS / 1500LX750DX885H Providing, Supplying, fixing and intallation of SOFA RELAX 2 SEATER / LEATHERETTE FINISH / SS LEGS of size L=1500mm x D=750mm x H=885mm made up of Frame : The sofa’s frame is made from solid, sustainable wood and commercial ply, Upholstery: Leatherette upholstered cushions and seat, Base-frame: 40x20x2mm thick with SS pipe, Base frame finish: Powder coating (black) Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

SOFA RELAX 3 SEATER / LEATHERETTE FINISH / SS LEGS / 2050LX750DX885HProviding, Supplying, fixing and intallation of SOFA RELAX 3 SEATER / LEATHERETTE FINISH / SS LEGS of size L=2050mm x D=750mm x H=885mm made up of Frame : The sofa’s frame is made from solid, sustainable wood and commercial ply, Upholstery: Leatherette upholstered cushions and seat, Base-frame: 40x20x2mm thick with SS pipe, Base frame finish: Powder coating (black) Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

SOFA TURF 1 SEATER /LEATHERETTE FINISH/ STAINLESS STEEL LEGS / 880X775X800 /Providing, Supplying, fixing and intallation of SOFA TURF 1 SEATER /LEATHERETTE FINISH/ STAINLESS STEEL LEGS of size L=880mm x B=775mm x H=800mm, placing of Host sofa 3/2/1 SEATER over all dimension for over all height is 800,over all width is775 mm, seat height is 430 m,seat depth is,550mm understructure is made up of Natural Hard wood battens and 12mm THK COMMERCIAL PLYWOOD. High density foam is used for seat and back , LEATHERITE -ABRASION RESISTANCE in excess of 80,000 cycles, 600 to 650 GSM composition is PVC and color is NAPOLI BLACK/ MANILA BEIGE / BURGUNDY RED Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

SOFA TURF 2 SEATER /LEATHERETTE FINISH/ STAINLESS STEEL LEGS / 1415X775X800 Providing, Supplying, fixing and intallation of SOFA TURF 2 SEATER /LEATHERETTE FINISH/ STAINLESS STEEL LEGS of size L=1415mm x B=775mm x H=800mm, placing of Host sofa 3/2/1 SEATER over all dimension for over all height is 800,over all width is775 mm, seat height is 430 m,seat depth is,550mm understructure is made up of Natural Hard wood battens and 12mm THK COMMERCIAL PLYWOOD. High density foam is used for seat and back , LEATHERITE -ABRASION RESISTANCE in excess of 80,000 cycles, 600 to 650 GSM composition is PVC and color is NAPOLI BLACK/ MANILA BEIGE / BURGUNDY RED Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

SOFA TURF 3 SEATER /LEATHERETTE FINISH/ STAINLESS STEEL LEGS / 1915X775X800 /Providing, Supplying, fixing and intallation of SOFA TURF 3 SEATER /LEATHERETTE FINISH/ STAINLESS STEEL LEGS of size L=1915mm x B=775mm x H=800mm, placing of Host sofa 3/2/1 SEATER over all dimension for over all height is 800,over all width is775 mm, seat height is 430 m,seat depth is,550mm understructure is made up of Natural Hard wood battens and 12mm THK COMMERCIAL PLYWOOD. High density foam is used for seat and back , LEATHERITE -ABRASION RESISTANCE in excess of 80,000 cycles, 600 to 650 GSM composition is PVC and color is NAPOLI BLACK/ MANILA BEIGE / BURGUNDY RED. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and intallation of SOFA Hudson 1 SEATER /LEATHERETTE FINISH/ WoodenL LEGS of size L=880mm x B=775mm x H=800mm Made up of Solid Wood Legs , Frame-Mayo Wood, Foam Density-50-55 -kilograms per cubic meter. LEATHERETTE -615 GSM -PU- , 1 %, PVC-79 % , Fabric-20%. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of SOFA Hudson 2 SEATER /LEATHERETTE FINISH/ Wooden LEGS of size L=1415mm x B=775mm x H=800mm Made up of Solid Wood Legs , Frame-Mayo Wood, Foam Density-50-55 -kilograms per cubic meter. LEATHERETTE -615 GSM -PU- , 1 %, PVC-79 % , Fabric-20%. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of CAFÉ CHAIR of Model : Trellis – SpecificationShell : Moulded plastic (PP) with Colour : Yellow / Orange / Red. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge. Model : Trellis – Specification, Shell: Moulded plastic (PP) Colour : Yellow / Orange / Red

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and installation of BUDDY CENTER TABLE of size L=600mm x B=600mm x H=450mm Made up with top 25mm thick prelamaminated partical board with reverse chamfer edge, laser cut Mild Steel frame with powder coated. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge. TOP 25MM THK PRELAM PB WITH REV CHAMF EDGE, MS POWDER COATED LASER CUT

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and installation of BUDDY CENTER TABLE of size L=900mm x B=600mm x H=450mm Made up with top 25mm thick prelamaminated partical board with reverse chamfer edge, laser cut Mild Steel frame with powder coated. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site, etc. complete as directed by Engineer - In - Charge. TOP 25MM THK PRELAM PB WITH REV CHAMF EDGE, MS POWDER COATED LASER CUT

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

TILE BASED PARTITION ( FOR CUBICLE ) Providing, Supplying, fixing and intallation of TILE BASED PARTITION (FOR CUBICLE)of 1200 mm height, made of 60mm thick aluminum frames having two separate race ways for laying electrical & computer wiring. The wire management shall be through to the race way to be fitted at bottom of partition and other immediately below of work top with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 x 16 pan-head machin screw and washer with aluminum post cover. Post cover of snap on fashion to be connected on aluminum connectors. All visible aluminium to be in anodized finish. The top/ exposed sides of the frame and posts should be covered with horizontal/ Vertical trim and caps made of Aluminum in anodized finishing. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and intallation of SOS or equivalent Make Prelam FREE STANDING TABLE of size 1350L X 600D x 750H with Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section Understructure- Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm.Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of SOLID PARTITION (1050/600HT) of 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Natural Silver Anadizing finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium and CRCA Rails with Vertical Channel / A Pole (Telescopic Channel of Aluminium Extrusion to give freedom of Height Variation in floor to ceiling heights at site) and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post, Inline Post and End Joints made up of Aluminium Extruded with Silver Anodizing finish with miniumum 1.3mm thickness and Tiles in 12mm thk. Prelaminated Partical Board of on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates, as per design and drawing. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and intallation of GLASS PARTITION (1350HT), 80mm to 85mm thick Full height Double Skin Solid Finish partition up to 3 mtr height with All visible sections in Natural Silver Anadizing finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium and CRCA Rails with Vertical Channel / A Pole (Telescopic Channel of Aluminium Extrusion to give freedom of Height Variation in floor to ceiling heights at site) and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post, Inline Post and End Joints made up of Aluminium Extruded with Silver Anodizing finish with miniumum 1.3mm thickness and Tiles of 8mm thk. Toughned Glass from inner and 5mm thk. Toughned Glass from outer With all the Joints of the partitions covered with PVC extrusions to provide better sound Proofing, as per design and drawing, Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and intallation of Glass Door With Door Frame of size 900mm x 2400mm - 12mm thk toughened glass door with frame in Anodized Alluminum with rubber gasket on both verticals for better sound proofing and provision for one side opening along Hardware consisting of Floor Spring Dorma/ Equivalant, Patch fitting , Lock, door stoper and Handle, as per design and drawing. Including cost of all material, fixtures, Carpenter, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and intallation of SOS or equivalen Prelam OPENABLE STORAGE PPB 18MM BACK 2 SHUTTER 900Lx600Dx750H with Storage Top- Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL. for Detetailed wording of Item please Refer Tender Book let

GROUND FLOOR

FIRST FLOOR

Providing, Supplying, fixing and intallation of SOS or equivalen Prelam OPENABLE STORAGE PPB 18MM BACK 3 SHUTTER 1050Lx600Dx750H with Storage Top- Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL. . for Detetailed wording of Item please Refer Tender Book let

GROUND FLOOR

FIRST FLOOR

THIRD FLOOR

Providing, Supplying, fixing and intallation of SOS or equivalent Make Prelam OPENABLE STORAGE PPB 18MM BACK 4 SHUTTER 1650Lx600Dx750H with Storage Top- Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL. . for Detetailed wording of Item please Refer Tender Book let

SECOND FLOOR

FOURTH FLOOR

Providing, Supplying, fixing and intallation of SOS or equivalent Make Prelam OPENABLE STORAGE PPB 18MM BACK 4 SHUTTER 900Lx600Dx2400H with Storage Top- Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL. . for Detetailed wording of Item please Refer Tender Book let

GROUND FLOOR

FIRST FLOOR

Providing, Supplying, fixing and intallation of SOS or equivalent Make Prelam OPENABLE STORAGE PPB 18MM BACK of size 1050L x 600D x 2400H with Storage Top- Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL. . for Detetailed wording of Item please Refer Tender Book let

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

Providing, Supplying, fixing and intallation of SOS or equivalent Make Prelam OPENABLE STORAGE PPB 18MM BACK of size 1200L x 600D x 2400H with Storage Top- Shall be made of 25mm thick Prelam (OSL) particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelam (OSl) particle board is used. Both the 25mm and 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL. . for Detetailed wording of Item please Refer Tender Book let

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing FURNITURE WORK, 19MM water proof BWP XTRA IS:710 ply companies, finish with 1.5mm thk MICA century, panelling fixed with S.S. Screws and nails, MICA fixed with 6mm thk press beading patti and nails, ply joint with joint pin, including fevicoll, lead, lift and labour charges etc. Complete. (NSSR) PANELLING AROUND THE DOORS

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing decorative teak plywood veneer lining 4 mm thick with backing of teak wood frame work of battens 12 mm X 25 mm at 30 cm center to center fixed to walls and pillars with 12 mm thik phywood building without skirting and cornice as per drawings including necessary iron work and finishing the exposed wood work with french polish etc. complete.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

PROVIDING AND FIXING 50x15mm THK. beading brama teak MOULDED WITH NAILS AND SCREWS INCLUDING SCAFOLDING ETC ALL COMPLETE.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

PROVIDING AND FIXING 25x10mm THK. beading brama teak MOULDED WITH NAILS AND SCREWS INCLUDING SCAFOLDING ETC ALL COMPLETE.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and applying french polish to new wood work, for required finishing including. knotting, preparing the surfaces, scaffolding etc. complete as directed.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing, making and fixing CUSIONED PANELING including 19MM PLY paelling on wall, cusioning made out of 6mm thick ply ,FOAM OF 50MM THICK OF 50 DENSITY, STEPESTRY CLOTH fixed on 19mm ply panelling including NAILS ADHESIVE, SREWS, scafolding ETC. ALL COMPLETE. As per the detailed drawing, pattern and as per the direction of engineer incharge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

FOURTH FLOOR

Providing and fixing PLATIC MOULD DECORATIVE LOUVERS SIZE 8'0-" x 0'-5" COMPLETE

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and Fixing Room Name Signages of Size 0.60 x 0.25m in 12mm. thick Opaque Glass Bevaled Edges / Acrylic 6mm. thick with engraved name. Including Painting, S.S. Studs of 25mm Dia, Fixing at Location in building. Including cost of all material, fixtures, Artist, Skilled, Semiskilled helper, labour, transportation at site. etc. as directed by Engineer - In - Charge

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing Toughned Glass 8mm in wooden frames with the help of t.w. beading all around fixred with nails, as per detailed design and the instruction of engineer incharge. etc all complete. Excluding t.w. beading and nails

Ground Floor

SHUTTER WITH HINGES Prelam Shutter- The complete storage shall have two shutters of 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue and are hinged shutter with equal width hung with 0 Crank on side panel and 9.5 crank hinges on middle vertical panel. C type SS brush finish handle is used in both the shutter of 96mm CD(center to center distance handle hole)and Hettich make. Black color PVC door strip and multi-purpose square lock (Hettich or Ebco) is used.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

NATURAL BAMBOO WALL PANELLING : Providing & fixing of Wooden Grill panel with backer made of natural bamboo with 24mm Face black exposed grid. The Grill panels shall be made of rapidly renewable natural bamboo core having density 600+Kgs/m3 as per BS EN323 (1993) and bending strength of 96+ N/mm2 as per BS EN310 (1993). The Grill panel shall have a seven layer UV coating of thickness 0.09-0.11mm as per BS EN71 finished to natural or carbonized shades. The Grill panel shall be of nominal size 35x300x2400mm comprising 8 blades/slats of 35x16x2376mm with centre to centre spacing of 37.5mm fixed through Backer of size 12x22x300mm having centre to centre spacing of 300mm and additional end backers at 150mm from both the edges. The Grill panel shall have a fire performance of Class A according to ASTM-E84. The Grill panel shall have moisture content of 8-14% as per IS 1708 (Part 1):1986 and a Humidity Resistance (RH) of 70%.

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing and fixing Ply panelling, 19mm bwp XTRA IS:710 grade plywood of century plywood or green ply or navrottam ply companies, finish with 1.5mm thk Mica Century, panelling fixed with S. S. Screws and nails, fixed with 6mm thk press beading patti and nai, ply joint with joint pin, including fevicoll, ltransportation and labour charges etc.all Complete. (NSSR) (PANELING AROUND THE DOOR & ABOVE LINTEL)

Ground Floor

First Floor

Second Floor

Third Floor

Fourth Floor

Providing, Supplying, fixing and intallation of Video Wall Panel Pixel 3.8 Cabinet Size 2' x 2' Material Indoor Shape Square Pixel Pitch 3.84 mm Density Dots Per Square M 67816 Max Power Consumption W Per Square M <600 Model Name/Number NVS P3.84Driving Method 1/15 scanning Working Temperature -20 ~50 Degree C +/-10%Working Voltage AC220V/110V+/-10% as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Video Wall Processor The inputs of the VX4S include CVBS×2, VGA×2, DVI×1, HDMI×1 , DP ×1 and SDI×1. They support input resolution up to 1920×1200at60Hz; the input images of VX4S can be zoomed point-to-point according to the screen resolution.Provide seamless high-speed switch and fade-in/ fade-out effect so as to strengthen and display picture demonstration of professional quality as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of FONSTAR FPRO25015 LOUDSPEAKER POWER:500 W maximum, 250 W RMS LOUDSPEAKERS:1 x 15" woofer: 65 mm coil and 140 mm ferrite magnet1 compression driver: 1" diaphragm, 1" mouth and 25.4 mm coil RESPONSE:55-20,000 Hz (± 3 dB) IMPEDANCE:8 Ω as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge

Providing, Supplying, fixing and intallation of ECLER eMCN2 is a condenser gooseneck microphone, with a perfect profile for message, speech and conferencing applications. Total length = 55cm. It includes anti-pop wind-screen cover as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of ECLER eMBASE is a desktop connection base for the eMCN1 and eMCN2 microphones, as well as for other microphones with standard XLR connector as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Fonestar MSH 209 RECEIVER/ MICROPHONE : Fixed frequency channel4 channels available RESPONSE: 80-12,000 Hz as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Fonestar SA2-1750 The SA2 series amplifiers deliver high power and sound quality with high performance and stability.Operating and power modes:Stereo and parallel up to 880 + 880 RMS@2 ΩBridge mode up to 1.750 W RMS@4 Ω as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Kasper KUA PS18D20"POWER:1,000 W maximum, 2,000 W RMSLOUDSPEAKERS:1 x 18"" woofer: 65 mm coil and 170 mm ferrite magnetRESPONSE:40-250 Hz (± 3 dB)IMPEDANCE: 8 ΩSENSITIVITY:98 dB at 1 W/1 m" as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Fonestar SA2-3400 The SA2 series amplifiers deliver high power and sound quality with high performance and stability.Operating and power modes:Stereo and parallel up to 1,700 + 1,700 W RMS@2 ΩBridge mode up to 3.400 W RMS@4 Ω as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Fonestar MPX-4088 Audio matrix with 8 analogue input channels to 8 output zones. 4 configurable input/output digital channels for use with controls mod as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Fonestar Force 12DSP "AMPLIFIER: 800 W peak, 600 W maximum, 300 W RMSClass DPROTECTION: Temperature, short circuit and overloadLOUDSPEAKERS:1 x 12"" woofer: 65 mm coil and 156 mm ferrite magnet 1 x 1 ⅓"" compression driver: 34 mm coil and 90 mm magnet" as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of 2.5 SQ MM SPEAKER CABLE 100 METER as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of 2 CORE MIC CABLE FOR BASCE MIC as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of NETRACK 32 U RACK 600 WIDTH AND 1000 DEPTH WITH STANDARED ACESSORIES as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of RCA CABLE & XLR Connetors or Acessories as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Installation , Site Visiting , Commisonning & Callibration Charges of Video Wall including all other charges etc. complete as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Pop-up microphone concealable cardioid condenser boundary microphone, which is made of high-quality brass, with built-in anti-vibration pad and RF filter. The interior design is based on the principle of mechanical structure expansion. When the microphone is not in use, the user can hide it without removing it from the desktop as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of 6115/D6115E Digital Conference System Host/Extender Hos The host and the conference mics are connected via the 8-pin cable for digital control and sound signal transmission. Can be operated independently or with an external computer combined with software for synchronous linkage operation to realize a variety of conference management functions (conference mode or operation: designated speech, free speech, application speech and first-in first-out speech, etc.) as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Sony Bravia 189 cm (75 inches) 4K Ultra HD Smart Screen Size 75 Inches Brand Sony Supported Internet Services Netflix, Zee5, Spotify, Voot, Youtube, Disney Hotstar, Amazon Prime, Sony, Apple TV, Jio TV, Eros Now, Sun NxtNetflix, and etc. as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of "Sony Bravia 215 cm (85 inches) 4K Ultra HD Smart Screen Size 85 Inches Brand Sony Supported Internet Services Netflix, Zee5, Spotify, Voot, Youtube, Disney Hotstar, Amazon Prime, Sony, Apple TV, Jio TV, Eros Now, Sun NxtNetflix, and etc. as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of "Sony Bravia 43 inches 4K Ultra HD Smart Screen Size 43 Inches Brand Sony Supported Internet Services Netflix, Zee5, Spotify, Voot, Youtube, Disney Hotstar, Amazon Prime, Sony, Apple TV, Jio TV, Eros Now, Sun NxtNetflix, and etc. as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of BENQ LU935 6000lms WUXGA Conference Room Projector Long Lasting Image Quality and Seamless Integration for Futureproof Conference Room as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of 150 Inch TAB Tension Tubelar Motor Motorised Projector Screen as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of HOC HEVAY 4K 2.0 HDMI SWITCHER 5 PORT as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of HOC HEAVY HDMI SPLITTER 4K 2.1 4 PORT per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of KASPER 15 METER OTICAL HDMI CABLE 4K 2.1 as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of RCA & XLR Connetors or Acessories as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Installation , Site Visiting , Commisonning & Callibration Charges of Video Wall including all other charges etc. complete as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of ECLER eMCN2 eMCN2 is a condenser gooseneck microphone, with a perfect profile for message, speech and conferencing applications. Total length = 55cm. It includes anti-pop wind-screen cover as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of ECLER eMBASE is a desktop connection base for the eMCN1 and eMCN2 microphones, as well as for other microphones with standard XLR connector as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of FONESTAR MPX-4088 Audio matrix with 8 analogue input channels to 8 output zones. 4 configurable input/output digital channels for use with controls mod as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of FONESTAR ELIPSE-8T FEATURES:Pair of low impedance loudspeakers with 100 V lintransformer. Designed for outdoor use, water-resistant and rustproof materials. POWER:120 W maximum, 60 W RMS LOUDSPEAKERS : 1 x 8" polypropylene woofer 1 x 1" silk dome tweeter (SPK in PAIR) as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of ECLER eGPA4-150 AMPLIFIER is a 4x150 W RMS @ 4 ohm, high efficiency multichannel amplifier (class D). Auto stand-by function and fanless design, 100% silent. Thermal and overload protections. Anti-clip system as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of LUMENUS C-TR1 Full HD Auto-Tracking Camera 20x Zoom PTZ Camera for automated production and live streaming Automatic subject tracking with smart switching Full HD 1080p 60fps with 20x optical zoom HDMI, 3G-SDI, IP, and USB video outputs Supports Power over Ethernet (PoE+) RTSP / RTMP / RTMPS and HEVC (H.265) / H.264 / MJPEG video streaming Compatible with Barco ClickShare Conference 5 Year Warranty * Also sold as VC-TR1T for some countries as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of The Core i5 CPU processor has three, four, or six megabytes of cache and is available at several speeds ranging from 1.90 GHz to 3.80 GHz. Depending on the motherboard, it uses the LGA 1150 or LGA 1155 socket. Four cores make up the quad-core configuration of Core i5 processors as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of KASPER 5 METER OTICAL HDMI CABLE 4K 2.1 as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of NETRACK 32 U RACK 600 WIDTH AND 1000 DEPTH WITH STANDARED ACESSORIES as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of 100 Meter 2.5 Square MM Speaker Spool Cable R as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of 2 CORE MIC CABLE FOR BASE MIC as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of RCA & XLR Connetors or Acessories as per detailed design and requirement. Including cost of all material, hardware, software, fixtures, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge

Installation , Site Visiting , Commisonning & Callibration Charges of Video Wall including all other charges etc. complete as directed by Engineer - In - Charge.

Providing and Fixing Deer of 1.50m height with appropriate all other dimentions Sculpture made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge. Deer A- Ht 1.50M

Providing and Fixing Deer of 0.9m height with appropriate all other dimentions Sculpture made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.

Providing and Fixing Sculpture of Deer of 1.00m height with appropriate all other dimentions Sculpture made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. IIncluding required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge. Deer C - Ht 1.00M

Providing and Fixing Deer of 1.80m height with appropriate all other dimentions Sculpture made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.Deer D - Ht 1.80 M

Providing and Fixing Sculpture of Rabbit of 0.60m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge. Rabbit- Ht 0.60 M

Providing and Fixing Sculpture of Rabbit of 0.50m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.Rabbit- Ht 0.50 M

Providing and Fixing Sculpture of Rabbit of 0.40m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.

Providing and Fixing Sculpture of Colourful Butterfly of 0.90m Length with appropriate all other dimentions made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including inside M.S. frame and 40mm dia. Mild steel pipe verticale support frame, finished it with one coat of Primer, two coat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.Butterfly-A- Ht 0.60M

Providing and Fixing Sculpture of Colourful Butterfly of 0.60m Length with appropriate all other dimentions made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including inside M.S. frame and 40mm dia. Mild steel pipe verticale support frame, finished it with one coat of Primer, two coat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.Butterfly-b- Ht 0.60M

Providing and Fixing Sculpture of Dragonfly of 1.10m Length with appropriate all other dimentions made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin, Wings in 6mm S.S rod frame, 4mm thk. Acrylic wings, including inside M.S. frame and 40mm dia. Mild steel pipe verticale support frame, finished it with one coat of Primer, two coat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.Dragonfly length 1.10 M

Providing and Fixing Sculpture of Small Birds of 0.15m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.

Providing and Fixing Sculpture of Snail of 0.70m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.Snail - A -0.7M Ht

Providing and Fixing Sculpture of Leopard of 0.68m height with appropriate all other dimentions with rock of 0.45m height, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.Leopard ht-0.68M with Rock. ht-0.45M

Providing and Fixing Sculpture of Bear of 2.10m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge. Bear- Ht-2.1M

Providing and Fixing Sculpture of Peacock of 0.90m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.Peacock – Ht-0.9M

Providing and Fixing Sculpture of Peacock with open feather of 1.70m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge. Peacock with open feathers – Ht-1.7 M

Providing and Fixing Sculpture of Tiger of 1.20m height with appropriate all other dimentions with rock of 0.45m height, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge Tiger -1 Ht-1.5M, with Rocks-Ht-0.45M

Providing and Fixing Sculpture of Tiger of 1.50m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge. Tiger -2 Ht-1.5M

Providing and Fixing Sculpture of Parrot of 2.20m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.Parrot

Providing and Fixing Sculpture of Parrot of 2.40m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.

Providing and Fixing Sculpture of Parrot of 2.70m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.

Providing and Fixing Sculpture of Parrot of 3.20m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.

Providing and Fixing Sculpture of Front looking Rabbit of 1.10m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.Rabbit-A- Front looking- Ht-1.1M

Providing and Fixing Sculpture of Rabbit of 0.70m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.

Providing and Fixing Sculpture of Sideway looking Rabbit of 0.80m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge.

Providing and Fixing Sculpture of Standing Rabbit of 0.90m height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge. Rabbit-F- Standing- Ht-0.9M

Providing and Fixing Sculpture of Eggs of 1.20 height with appropriate all other dimentions, made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge. Eggs – 1.2M Ht.

Providing and Fixing Sculpture of Rock base for Tiger of size 16.00m x 2.75m x 0.60m. Made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge. Base For Tiger – 16m x 2.75 m with average height of 600mm

Providing and Fixing Sculpture of Round White Globe with lighting with average dia. of 900 mm. Made of ferocrete/ fiber of outdoor quality having natural look and shape, 450 GSM chopped fiberglass matt, unsaturated Polyester resin. Including required Mild steel inside support frame of proper size, finished it with one coat of Primer, two ocat of outomotive paint & top coat of PU clear Matt finish. Including fixing over foundation as per design and dimentions, clay or other material module, all material, all tools, machineries, Artist, skilled/ semiskilled labour, scaffoldings, transportation of all material to work site etc. complete as directed by Engineer - In - Charge. Round White Globe with lighting with average height of 600mm-900 mm

providing, supplying and fixing of high emboss wall sculpture as per detailed design and drawing made up of FRP material of minimum 5 mm thickness including MS frame of 25 mm X 25 mm square pipes support system , preparation of clay models, POP die,POP finishing.FRP watering finishing, FRP deco primer, approved FRP deco painting, approved FRP deco PU cote, for all lead and lift etc. complete,as directed by Engineer incharge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and Fixing glass film of appropriate size and designs on glass of standard make with high solar energy rejection. Iincluding all material, fixtures, accessories, fixing over glass with adhessive, scafolding. The sample, quality of film and design of glass film shall be got approved from architect/ engineer in charge before fixing. Including cost of all material, fixtures, Carpenter, Skilled, Semiskilled helper, labour, transportation at work site etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing Specialised laser cutting for 5mm thick MS sheets as per asthetic design, to make complete image as required by Architect / Engineer in charge as per standard specifications including specialized machinery, skilled cutters, welders, all accessories etc. complete. filling with concrete using 12mm down size aggregates at Window and door Jambs for fixing hold fast, anchors etc. It must be green building certification from IGBC and Griha and should comply IS code 3952. Including cost of all material, fixtures, Skilled, Semiskilled helper, labour, transportation at work site etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing Metallic Photo Frame of size 18''x 24'' including cost of all material, fixtures, accessories, carpenter, helper, labour, transportation at work site etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing 3D Map Board with Metallic Photo Frame of size 48'' x 36'' including cost of all material, fixtures, accessories, carpenter, helper, labour, transportation at work site etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

THIRD FLOOR

FOURTH FLOOR

Providing and fixing 3D Map Board with Metallic Photo Frame of size 78'' x 36'' including cost of all material, fixtures, accessories, carpenter, helper, labour, transportation at work site etc. complete as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

FOURTH FLOOR

Providing and fixing Artificial Green Grass at site including all complete

GROUND FLOOR

FIRST FLOOR

Providing, Supplying, fixing and intallation of Water Tank of 4.05x2.025x0.45m. Height in fiber giving Rock Cut look with bubblers 10 nos 2 small height 0.90m. Height fountain, supply piping, drain Pipe, submersible appropriate H.P. Nosel’S base plates, artificial plants of 0.60 to 0.90m Height and Ip 65 Submerged Lights, Ip 65 wiring as required for Decore etc. all Complete. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing on site well established (free from weeds /diesease etc.) ready to fix lawn turf in slabs/ rolls of required variety as directed including Excavating the ground to a 30 cm Depth removing and conveying unwanted stuff to a required distance as directed. Providing and filling fresh garden soil and manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and manure thoroughly, well leveling with required slope, light watering on previous night, rolling on surface, fixing readymade lawn turf rolls or slab of required variety as directed. Ramming of It for proper fixing & maintaining till well established by watering, weeding, clipping or mowing etc. complete.

Planting VARIOUS PLANTS, of different Height 5Ft to 10Ft including Digging pit size 0.60 x 0.60 x 0.60m, removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto height of 0.30m and remaining height of 0.60m with fresh garden soil and manure in 3:1 proportion. Mixing soil & manure thoroughly well, levelling, watering on previous night. Planting 2-3 yrs old minimum 6 Ft To 8Ft height healthy tree sappling, as per specifications. Maintaining till well established by watering, weeding, stirring of soil, tacking, replacing of casualties etc. complete.

Foxtail Palm/ Wodyetia (ht7'-10',bag size18"x18"

Bismarkia(ht6'-8',bag size15"x16",

Fern Tree(ht6'-8',bag size13"x13",

Cordyline(ht30cm-60cm,bag size13"x13"

Royal Palm(ht7'-8',bag size18"x18",pg no.33)

Lemon Grass(ht15cm-30cm,bag size7"x8",pg no.34)

3. Kadamb(h6'-8',bag size13"x13",pg no.21)

4. Palas(ht6'-8',bag size13"x13",pg no.21)

5. Bottle Brush(ht8'-10',bag size18"x18",pg no.22)

6.Gulmohar(ht8'-10',bag size18"x18",pg no.22)

7. Kanchan(ht8'-10',bag size18"x18",pg no.22)

1. Rhapis Excelsa (ht5' to 7',bag size18"x18",pg no.33, with pot)

2. Areca Palm / Dypsis lutescens (ht9',bag size21"x21",pg no.33,with pot)

1. Poinsettia (ht30cm-45cm,8" pots",pg no.32)

2. Sansevieria (ht20cm-30cm,6" pots, pg no.31)

3. Bongainvillea sp Singh (ht50cm-60cm, bag size13"x13",pg no.26)

4. Bottle brush (ht3' 4',bag size8"x10", pg no.20)

5.Golden Wichimeri (ht5' to 6',bag size18"x18",pg no.33)

1. Money plant white green (ht50-60cm,10" mosstick pots,pg no.32)

2.Bougavillae Thema (ht60-75cm,bag size18"x18",pg no.26)

3. Plumeria Dwarf Singapore pink (ht90-120cm, bag size18"x18",pg no.17)

4. Majesty Palm/ Bismarkia (ht5'-7',15"x16",pg no.33, with pot)

1.Green Mirchimeri (ht5'-6',bag size18"x18", pg no.33, with pot)

2. Areca Palm/Dypsis lustecens ht7'-8', bag size18"x18", pg no.33, with pot)

3.Money Plant Marble ht60cm,10" mosstyick pots,pg no.32,with pots)

4. Monstera (ht60cm,bag size8"x10",pg no.32)

1. Money Plant Golden (ht60cm,10"mosstick pots,pg no.31)

2. Dracaena golden (ht30cm', 8" pots,pg no.31)

3.Zamia (ht10cm-20cm,6" pots,pg no.31)

4. Bismarkia(ht4'-5',bag size13"x13",pg no.32)

1. Oxycardium Golden (ht60cm-90cm,10" mosstick,pg no.31)

2. Oxycardium Green (ht60cm-90cm10" mosstick,pg no.31)

1. Ficus Panda Rutuja/Golden Wichmeri (ht6',bag size18"x18",pg no.33)

2.Tabebuia (ht10',bag size21"x21",pg no.22)

3.Bakul (ht6'-8',bag size13"x13",pg no.21)

4. Telecoma Stans (ht50-60cm,bag size8"x10",pg no.26)

Providing and Supplying of white pebbles for the gardening & plantation work. Including cost of all material, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of OMNI GREEN VERTICAL GARDEN (NATURAL) Bio wall system Omni System which include PPCP material Pot size of 15cmX10cmx60cm with galvanized iron back support section. Module will be filled with light weight porus well drain engineered growth media which is a combination of oganic and inorganic material and natural plants.Automatic irrigation system with controller and required solenoid valves suitable run the green wall as per detailed design and drawing. Including cost of all material, fixtures, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

Providing, Supplying, fixing and intallation of PVC pipe of 50 MM dia. 6KG pressure for water irrigarion. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of POP UP of 9 METER REDUCE. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge

Providing, Supplying, fixing and intallation of POP UP of 3 Meter. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Solnate Valve of 1.5 Inch. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Controller Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Saddle of 50mm = 25mm. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Saddle of 50mm = 20mm. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of PVC Boll of Valve 1.50". Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

.Providing, Supplying, fixing and intallation of Cable 2 core 1mm. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Submersible Pump 2 HP. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Statter. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Valve Box of 12 Inch. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Hardware & Fetting L.S. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of 3 Core cable. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Latteral Pipe 16 mm. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Installation, Site Visiting, Commisonning & testing including all other charges etc. complete as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Swing – Joint 25mm. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of Swing – Joint 20mm. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Providing, Supplying, fixing and intallation of PVC casing pipe of 1 inch dia. Including cost of all material, fixtures, Plumber, Technician, Skilled, Semiskilled helper, labour, transportation at site etc. as directed by Engineer - In - Charge.

Transportation charges of drilling machine, pipes and all accesorries of tube well etc.complete.

Drilling of tube well 150 mm dia. including drilling in all strata, removing drilled stuff out side the tube well complete.

Providing with thread Plain Iron casing pipes of 150 mm dia and 4.80mm thick Pipes of M.S.E.R.W. medium class (I.S.1239) for 150 mm dia. Tube-well, including lowering into tube well without any damage & welding etc. complete.

Providing Perforated Iron casing pipes of 150 mm dia and of 4.80mm thickness of M.S.E.R.W. medium class (I.S.1239), including lowering into tube well without any damage etc. complete.

Providing and fixing steel cap (I.S. 1239) for threaded Iron casing pipes including all acessesories complete.

Providiing gravel packing around the tube well & as directed by the engineer-Incharge etc. complete.

Improving (Development) process of tube well etc. complete.

Providing and fixing bell plug including all acessesories etc. complete.

Providing Wooden blocks of Mango trees of size 1.00m in length x 0.15m. width x 0.20m. thick. etc. complete.

Providing and fixing steel clamps 1.00m in length x 0.10m. width x 0.01m. thick. etc. Complete.

Providing Flushing (Air Lift method) after completion of Tubwell and capacity test by 90 degree "V" notch for half an hour as per G.S.D.A. Norms etc. Complete.

Providing and laying in trenches 25 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 32 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 50 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and laying in trenches 15 mm dai. CPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 50 mm dia. wheeled stop tap of brass including necessary sockets/ union nut complete.

Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and fixing H.D.P container one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres

Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.

Removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete.

Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts etc.

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete.

Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete.

Removing Manglore tiled roof and ridge tiles with battens, ridge and barge boards, eaves 8 A boards etc and sacking the materials as directed with all leads and lifts complete. Including removing wood work below etc. complete.

Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete

Removing rafters from roof including the materials as directed with all leads , lifts etc. complete.

Dismantling flat wooden or A.C. Sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etc. complete.

Lowering down the debris obtained from breaking and removing the cement plaster / burnt brick masonry of the first floor by any means without causing dust nuisance and damage to structure, stacking the same as and where directed including cleaning the site complete.

Cement: Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundnes

Aggregate (Water Absorption, Specific Gravity, Impact Value, Crushing Value)

Sieve Analysis.

Abrasion Value.

Flakiness Index & Elongation Index.

Stripping Value. (for Bituminous Work)

Soundness.

Sand: (Fine aggregate) Fineness modulus sieve analysis ,silt and clay content.

Concrete Mix design (With all Tests on basic materials)

Compressive Strength C.C. Cube (Set of 3 cubes)

Bricks Water Absorption (set of 5 bricks), Compressive Strength,Efflorerescence.

Steel bar Testing up to 16 mm dia. Tensile Strength, %Elongation , yield stress, weight per meter

Steel bar Testing above 16 mm dia.Tensile Strength, %Elongation , yield stress, weight per meter

Flooring Tiles(Ceramic & Vetrified tiles) Water Absorption , Modulus of rupture.

WOOD (Density, Moisture Content.)

FLUSH DOOR (Knife Test, Adhesion Test, End Immersion Test.)

PLYWOOD-Determination of Resistance to dry heat, Determination of Moisture Content, Determination of Density, Thickness of Plywood.

Test for Glue Adhesion

ALUMINIUM SECTION Thickness, Mass Per Running meter,

P.V.C. PIPES (NONPLASTISIZED) weight per running meter ,Diameter of pipe & wall thickness of pipe

Water (PH ValueSulphate & Chloride Content)

NON -DESTRUCTIVE TEST (Rebound Hammer Test)

Royalty charges on Sand

Royalty charges on Murum and other material

Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

SSupplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 40 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 4x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking /inside pole/ Bus bars or any other places. as per specification No: WG-MA/BW (LDB Circuit)

Supplying & erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places. as per specification No: WG-MA/BW (LDB Circuit earth)

Supplying & erecting mains with 4x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole /Bus bars or any other places as per specification No: WG-MA/BW (PDB & Main LDB Circuit) (Rs 103 x 2 = 206)

Supplying & erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places as per specification No: WG-MA/BW (PDB Circuit earth) (Rs 103 /2 = 51.50)

Supplying & erecting mains with 4x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places as per specification No: WG-MA/BW (Main PDB Circuit)

Supplying & erecting mains with 1x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/ inside pole/ Bus bars or any other places as per specification No: WG-MA/BW (PDB Circuit earth)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected.

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type T.V. socket single outlet, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background

1-w- Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG?PW/SW

Point wiring for ceiling fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing andrequired accessories as per specification No: WG-PW/SW

2-w- Point wiring for light/bell/exhaust fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG?PW/SW

Wiring for plug on board with Switch socket surface/ concealed type, copper wiring and earthing and with modular accessories as per specification No: WP W/CW

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switc

Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Secondary point wiring for additional light/ bell point, concealed type in min 20 mm FRLS grade PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires with required accessories as per specification No: WG-PW/CW

Point wiring for light/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switc

Supplying LED concealed type foot / step light with aluminium body for indoor/outdoor application suitable for 4W-6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with 1 year warranty.

Supplying & erecting ready to use Retrofit T8 LED 18 / 20 tube light with polycarbonate body, heat sink, integrated HF electronic driver complete & compatible to T8 / T12 LED luminaire by disconnecting starter & ballast if necessary.

Supplying & erecting decorative pre-wired box type fitting/batten suitable for 4 feet, T8 LED tube light (excluding tube light).

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size.

Supplying and erecting integrated LED street light fitting 18 to 22W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 1800 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140- 270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG?ODF/FLS2

Supplying and erecting street light Wall bracket made from 25 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 / E-27 base.

Supplying and erecting air circulator 450 mm. sweep oscillating type, wall mounting 1440 RPM with speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 Volts single phase, 50 cycles A.C. supply, with one meter of 3 core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.

Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/ compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF

Supplying and erecting LED square / circular Max. 7W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 770 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty

Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

Supplying and erecting fan hook box of 10 mm M.S. round bar bounded to the R.C.C. bars upto 50 mm length each side and pierced through a 16 S.W.G. thick aluminium/M.S. Bowl 100 mm dia. or equivalent square size and having depth upto 75 mm complete erected with duly painted by one coat of red oxide paint and two coats of paint erected in position and without any leakage of slurry of cement concrete on either side of the box and positioned to the bottom level of the slab

Supplying, erecting, testing and commissioning of 6kVA capacity online pure sine wave with backup time of .1/2. hrs. (120 min (2 Hrs) PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protections as per specification no. AP-UPS (for Camera NVR, LAN Rack & EPABX supply)

Supplying and erecting 12V/26Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 35 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 95 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses /pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI (Main OT DB-1, Main AC DB-1, MLDB-1, MPDB-1, M Med Inst PDB-1, Pump DB-1, MCCB Panel-1, SFU Panel-1, LA-2)

Supplying and erecting aluminium strip of high purity required sizes used for earthing on wall and/or any other purpose with necessary aluminium clamps fixed on wall painted with bituminous paint with joints required as per specification no EA-EP.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.(From Transformer LT Panel to Main MCCB Panel Cable- Panel Room)

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 500 mm width & 75 mm height complete with necessary coupler plates & hardware.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying & erecting co-axial copper cable low voltage grade tri-shielded RG?6 as per specification No. WG

Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire. (for ceiling Fn)

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation complete.

Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. (Passage Ceiling furniture)

Supplying and erecting integrated LED round burial light 6W IP65 & IK10 class having pressure die-cast housing, having system lumens output of Min. 500 Lumens, min. efficacy of 85 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 100-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50, including driver, salt spray tested for 500 Hrs. including making of recess of appropriate size for flushing into surface with 2 Year warranty as per specificati on No FG-ODF/FLS2. (wall Washer for building wall outer light)

Supplying and erecting LED Strip light 5m Length Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f. >0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50 including driver with 1 year warranty. (POP Molding)

Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL (compound Light)

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 80/100A in provided distribution board.

Supplying, erecting & commissioning 4 pole RCCB 100A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 4 ways/phase (12 poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways /12 Poles, with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways /36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (36 poles) or TP MCB of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB

Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/ MCCB

Providing & erecting 4 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/ MCCB

Providing & erecting 3 Pole MCCB, 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/ MCCB

Providing & erecting 4 Pole MCCB, 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/ MCCB

Providing & erecting 4 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/ MCCB (25327)

Supplying, fixing and commissioning 4 pole RCBO 6/10/16/20/25A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indications per specification no SW-RCCB/RCBO

Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/ RCBO

Supplying, fixing and commissioning 4 pole RCBO 63A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection, with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO

Supplying and erecting terminal spreaders suitable for 3 pole, up to 250A MCCB (set of 6)

Supplying and erecting terminal spreaders suitable for 4 pole, above 630A up to 800A MCCB (Set of 8)

Supplying & erecting four pole ON LOAD change over switch, 415V, 400A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS/ IEC 60947-3 Part-1/3..

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying and erecting Iron, sheet metal work consisting of CRCA Sheets, Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority

Providing & erecting 3 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR /MCCB (20% add for 4-pole) (25327+20% add)

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP?BB (800Amp Bus bar) (80x10 - 7.11 kg/mtr- 3 mtr x 7.11 = 21.33 kg)

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying & erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 400A

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting integrated LED street light fitting 26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminium housing , having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2.

Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB (Street Light Pole)

Supplying & erecting 415V, 16A porcelain base neutral link complete erected in provided M.S. box.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses /pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses /pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /inside pole/Bus bars or any other places as per specification No: WG-MA/BW (for 1 Lift- Lift Room- 7 mtr)

Supplying and erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking /inside pole/Bus bars or any other places as per specification No: WG-MA/BW (for 1 Lift- Lift Room- 7 mtr)

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/ trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (for 1 Lift- shaft- 25 mtr)

Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW (for 1 Lift- shaft- 25 mtr)

Supplying and laying rigid steel conduit 16 SWG 25 mm dia. with necessary accessories in RCC work/false ceiling/false flooring as per specification No: WG?MA/CC (10 mtr for 1 Lift)

Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. (shaft-2 (bulkhead-1 & socket-1)x 3= 6 x 3= 18)

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (shaft - 1 x 3 = 3 x 9 =9)

Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. (Lift Room- 1 x 1= 1 x 3 = 3)

Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete. (Lift Room power- 1 x 1= 1 x 3 = 3)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 module duly erected. (Lift Room power- 1 x 1 = 1 x 3 =3)

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected (shaft- 1 x 3 = 3 x 3 =9)

Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG?PW/CW (Lift room-3 no x 3 = 9)

Wiring for plug on board with Switch socket surface/ concealed type, copper wiring and earthing and with modular accessories as per specification No: WGPW /CW (Lift Room- 1 x 3= 3)

Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22 /

Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty. (Shaft 3 x 3= 9)

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification no. SW-SWR/MCB (Lifr Romm power-1)

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SWSWR/ MCB (shaft Lighting-1, Romm SB-1)

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SW-RCCB/RCCB (Lift Room 4-SPN enclosure)

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete. (4P RCCB-1, 2P RCCB+2SP MCB-1) (2 x 3= 6)

Providing, erecting & commissioning 4 pole RCCB 100A, with added immunity to avoid DC pulse tripping with 30/100/300 mA sensitivity complete as per specification no. SW-RCCB/RCCB

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V 2 core 4 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses /pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting annealed bare copper wire of high purity of required sizes used for earthing on wall with necessary copper clamps fixed on wall /cable /conduit with screws complete. (8 SWG Tar- 0.116 kg / mtr - 20 Mtr x 0.116 Kg/Mtr = 2.32 Kg x 1 Lifts)

SITC of Electric Traction Passenger cum Stretcher/ Hospital Lift with ( for Detailed Wording of Item Refer Tender Booklet)

For Full Collective control system

For Lift having 1000mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/ belts, & OSG rope, landing doors with all accessories etc. complete for the safe functioning of lift installation.

Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete.

Supplying, erecting, testing and commissioning of diesel generating set with alternator of 320 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 54.89 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 480 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of Microprocessor based AMFpanel suitable for Diesel Generating Set of above 320 kVA up to 400 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF..(10% less)

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL (20 mtr- 2 Run)

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 160 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. (25x3 GI Strip - 30 Mtr x 0.59 Kg/Mtr = 17.7)

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 185 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT (2R X 190)

Supplying & laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (Except bitumen carpet). (10 mtr of 2 mtr)

Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT

Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating /epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 10/5A to 50/5A, VA10 or 15, Class 0.5S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.5 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth/ cc foundation.

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 185 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT (2R X 30)

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT (1 for connected and 1 for standby)

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT

Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. (25x3 GI Strip - 20 Mtr x 0.59 Kg/Mtr = 18.8)

Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ (11 mtr - 2 Pole= 2 x 11=22 mtr))

Supplying and fixing MS base plate 30x30x0.6cm size fixed to the pole base either by welding 12mm dia fixed at position.

Supplying & erecting 100 x 50 x 6 mm with 4.7 mm thick web and 7.5 mm thick flange channel iron cross arm of suitable length for 2.4 m wide DP structure and erecting on DP with 50x6mm clamp complete as per specification no. OH. (9.2 kg/m- 2.4m x 9.2 kg= 22.08 kg - 275/22.08= 12.45 Nos) (2 for AB switch, 2 for Horn Gap)

Supplying and erecting V cross arm with ISM channel of 75x40x6mm for 11kV HT OH line with arrangement to fix insulator at 45mm from the end & horizontal distance between insulators 1220mm bent at angle of 60 degree keeping base 305mm and the total vertical height of V cross arm as 460mm, and fixed on pole with MS clamp of 80x10 mm, nut bolts, washers complete as per specification no. OH-PL/VCA

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. (channel for AB support, DO support, and LA)

Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete as per specification no. OH-INS/PN

Supplying and erecting 11 kV outdoor type gang operated air break, triple pole switch 400 A capacity with 3 post pin type insulator per phase, mounted in horizontal or vertical position with necessary channels on provided cross arm with adequate length of "C" class G.l. pipe for operating handle erected on extended square shaft. The operating handle provided with lock and key at suitable height from ground level with necessary clamp. .

Supplying and erecting C type (half) clamps for pole made from 50x6mm flat for fixing cross arms by means of 15mm bolts and nuts painted with one coat of red oxide and two coats of aluminium paint complete.

Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA

Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fuse barrel with metal fitting, fuse element mounted on M.S. channel with working current of 15A capacity complete erected on provided cross arm.

Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP P (DP Structure-2, AB-3, DO set-3)

Making cement concrete foundation including excavation (60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP (LA-3)

Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT

Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 185 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT (2R X 30)

Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT (1 for connected and 1 for standby)

Supplying & laying (including excavation) half round reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete

Supplying, installing, testing & commissioning 3 phase, 11/0.433 kV, 50 Hz., 315 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound Non-sealed transformer delta/star connected with additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%,+5 to -10 in steps of 2.5%, having 7 number of tap positions with standard accessories complete with test certificate with losses below 1025 Watts at 50% load, 3100 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-NSL.

Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results as per specification no. EA-EP (Transformer-4, LT panel-2)

Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. (4 kg for each earth)

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

Supplying and erecting Iron, sheet metal work consisting of CRCA Sheets, Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority

Providing & erecting 3 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR /MCCB (20% add for 4-pole) (25327+20% add)

Supplying and erecting switch disconnector fuse (SDF) switch 415V, 630A, open execution, four pole AC23 A rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to IS/IEC 60947-3 Part-1/3 HRC - DIN type fuse, insulation voltage 1000 V for enclosing in panel with rotary handle for ON / OFF operation (without HRC fuse).. (less 25%, will be installed in febricated panel Rs 25353 - 25% ))

Supplying and erecting DIN Type HRC Fuse cartridge 500V, 630A

Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard

Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP?BB (800Amp Bus bar) (80x10 - 7.11 kg/mtr- 1.5 mtr x 7.11 = 10.665 kg)

Supplying and erecting panel mounting type digital ammeter having three and half digit LED display, external CT operated, calibrated for suitable to operate on 500V, 0 to 1000A having accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying and erecting panel mounting type digital voltmeter having three and half digit LED display, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5 ,AC supply with necessary PVC wire leads and lugs and mounting hardware on provided panel complete with calibration certificate from manufacturer.

Supplying & erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 400A

Supplying and erecting LT current transformer with bar primary 50/5 to 1000/5 ratio with 15 VA burden erected in provided CRCA box duly secured with insulating materials connected to the meter with test certificates.

Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

SSupplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background

Supplying & erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as per specification No. WG-TW

Supplying & erecting 20 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW (main telephone cable)

Supplying, erecting & commissioning MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

Supplying, erecting & commissioning 10 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW

Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW (main cable)

Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW

Supplying, installing, testing & commissioning digital (hybrid) type EPABX of 6 x 16 extension complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

SSupplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying and erecting modular type computer Jack RJ45 with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and fixing tool-less shutter keystone jack (RJ-45) in provided patch panel complete as per specification no. WG-NAS/KJ

Supplying and installing armoured single mode optical fibre cable with 6 fiber, core dia 50/125μm (OS1/OS2) 10/40 GBPS speed in provided underground HDPE pipe complete.

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and fixing 12 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fibre cables in provided U rack complete as per specification no. WG-NAS/ LIU

Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and fixing 3 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view/ CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG

Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack as per specification No. WG-NWC/ADSL

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x600x635 mm) as per specification No. WG-NAS/RAK

Supplying and fixing dual-band manageable wireless 3x3 Mesh Router, high performance, 802.11 n/ac unified, concurrent access point with POE in networking as per specification no. WG-NAS/LAP2

Supplying and erecting HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 20 mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. With necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and fixing POE adaptor to provide DC supply to ethernet devices as per specification No. WG-NAS/PEA

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x600x367 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 24 ports, POE switch in provided rack as per specification No. WG-NWC/ENS

Supplying and erecting 25m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.

Supplying erecting testing and commissioning of 2 MP motirised , verifocal, IP Dome Camera with built in microphone with having following features: (1) maximum 2M (1920 x 1080 ) resolution, (2) Min. Illumination : Color 0.095 LUX (30 IRE) , B/W : 0 Lus (IR LED On), (3) 2.8 - 12mm (4.3x) varifocal lens, (4) Field of view : H : 103.80 - 32.40/ / V: 53.70 - 18.40/ D : 121.90- 37.10 (5) 120 dB WDR (6) Max. 30 fps @ 2 M all resolusions (H.265/ H.264), (7) H.165, H.264 codec supported, (8) Intelligent analytic like Motion detection with metadata, tampering, defocus detection, (9) 128 GB micro SD/ SDHC/ SDXC memory slot, PoE/ 12V DC, (10) IR viewable length 20m. (11) Motion detection min 4 zones. (12) Multiple streaming upto 3 profiles, (13) Model specific UL,CE & FCC certification. Detection min 4 zones (14) multiple streaming min upto 3 profile (15 LDC support (16) Model specification and UL , CE & FCC certificationI) I) Video Resolution; Sub Stream 2MP (1920+1080) max; 30fps, Third Stream: D1 (720x576) max;30fps 2)Frame Rate;- Main stream 4MP (2592x1520), 20fps, 4MP (2560x1440) ; max; 25fps, 3MP (2048x1520); max 30fps sub stream 2MP (1920x1080)

Supplying erecting testing and commissioning of 2 MP motirised , verifocal, IP Bullet Camera with external microphone with having following features: (1) maximum 2M (1920x1080) resolution, (2) Min. Illumination: Color 0.095 LUX(30IRE), B/W: 0 Lus (IR LED On), (3)2.8- 12mm(4.3x) varifocal lens, (4) Field of view: H: 103.80- 32.40/ V: 53.70- 18.40/D : 121.90- 37.10 (5) 120dB WDR (6) Max. 30 fps @ 2 M all resolusions (H.265/ H.264), (7) H.165, H.264 codec supported, (8) Intelligent analytic like Motion detection with metadata, tampering, defocus detection, (9) 128 GB micro SD/ SDHC/ SDXC memory slot, PoE/ 12V DC, (10) IR viewable length 30m. IP-66, IK10 (11) Motion detection min 4 zones. (12) Multiple streaming upto 3 profiles, (13) Hallway, view support, (14) LDC Support (15) Model specific UL, CE & FCC Certification I) Video Resolution; Sub Stream 2MP (1920+1080) max; 30fps, Third Stream: D1 (720x576) max;30fps 2) Frame Rate;- Main stream 4MP (2592x1520), 20fps, 4MP (2560x1440) ; max; 25fps, 3MP (2048x1520); max 30fps sub stream 2MP (1920x1080)

Supplying erecting testing and commissioning of 32 channel network video recorder (NVR) with 8. HHD slots for 48 Tb storage support having following specification : Dual core embeded processor with 8 HHD slots supporting 48 TB for internal recording and external ISCSI storage upto 384 TB, Embedded Linux, 32 Channel with 1080p Realtime Live View upto 12 Mega pixel resolution preview & playback ,256 Mbps Recording Bandwidth & 32 Mbps playback bandwith atleast playback of 16 channels simultaneously, Supporting TCP/IP,UDP/IP, RTP(UDP), RTP (TCP), RTSP, NTP, HTTP, DHCP (Server,Client), PPPoE, SMTP, ICMP, IGMP, ARP, DNS, DDNS, uPnP, HTTPS, SNMP, ONVIF (Profiles), SUNAPI (Server, Client) Protocals.

Supplying erecting testing and commissioning of 8TB cpacity internal SATA HDD having following specification General 7200.14, Capacity 8TB, Form factor 3.5'', interface option SATA 6Gb/s, Performance , Transfer rate Max Ext (MB/s)600, Sustained data rate OD210MB/s, Average latency (ms) 4.16, Power management , Idiling Typicaloperating (W) 7.5, Similar to Seagate make SATA 8TB (ST4000DM000)with 2yrs manu warrenty.

Supplying erecting testing and commissioning 108 cm (43") Full HD slim LED television having Display 1920x1080 resolution similar to 2 x HDMI, 2 x USB Port 1 Year Samsung India Warranty 95 W Power Consumption Similar to Samsung Joy Plus UA43J5100AR43.

Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC/NC

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 120 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses /pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg.capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 / 15683 of 6 kg capacity with necessary clamp for erection on wall. (Reference taken from- 100 Beded Akot Hospital-, TS Dt-06.12-2022 Sanction No. 2385)

Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 1800 to 2280 LPM at 80 to 60 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 37kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal/split casing pump of cast iron body & bronze impeller with stainless steel shaft(SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/EP

Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 70 to 50 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, multi stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003)complete, as per specification no. FF-MFP/JP

Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 7.5 kW or of suitable kW capacity for manual/automatic operation and consisting of following : (a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation on with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d)Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP

Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP

Supplying and erecting G.I. pipe ‘C’ class ERW 200 mm dia with necessary fittings complete as per specification no. FF-PP

Providing coating of bitumen paint & 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

Supplying and erecting 80 mm dia cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification no. FF-VL/FV (jockey-1)

Supplying and erecting 150 mm dia cast iron foot valve ball type/flap type with strainer for negative suction complete as per specification no. FF-VL/FV (1 for Diesel and 1 for Main pump)

Supplying and erecting 75/80 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS (Jockey-1, Booster-1)

Supplying and erecting 150 mm dia Cast Iron end line strainer of Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standard OAR (open area Ratio) for positive suction complete as per specification no. FF-VL/ELS

Supplying and erecting 150 mm dia Cast Iron end line strainer of T-Pot type flanged end pattern, PN16 pressure rating, screen of SS and end connection with flanged,for positive suction complete as per specification no. FF-VL/ELS (main Pump-1, Deisal pump-1)

Supplying and erecting 65 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (Sprinkler system)

Supplying and erecting 75/80 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV (Sprinkler system)

Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV

Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL/NRV

Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL/GV

Supplying and erecting gun metal single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL/HV

Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA/PT

Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA/HV

Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA/RRL

Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF?

Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA/FBC

Supplying and erecting 300 mm dia 1.5m in height air vessel / tank fabricated from min 5mm thick M.S. sheet complete as per specification no. FF-FFA/ACT

Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG

Supplying and erecting 12/15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS

Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer dia with required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 x 736 x 736 mm.) made from 16 SWG sheet and angle iron 25 x 25 x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF

Supplying, erecting testing and commissioning optical type smoke detector on suitable back box with necessary connections complete as per specification no. FF-FAS/SD

Supplying, erecting testing and commissioning manual call point (Pill box) with break glass, push button (resettable type) in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, erecting, testing and commissioning hooters having high (100dB @ 1m) and low (94dB @ 1m) volume setting, group addressing facility allowing multiple sounders to be activated with CRCA enclosure complete as per specification no. FF-FAAS/HTR

Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS/RRI

Supplying, installing, testing and commissioning of 4 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories , 16x2 Character LCD Display, provision for zone wise contact and beep sound alarm, suitable to operate on 120-220 V AC, 0 - 49 Deg C, 93 ± 2 Percentage RH (non- condensing) at 32 ± 2 Deg C complete as per specification no. FF-FAAS/FACP (25% for each zone= 2 x (17839*25%) 4460 = 8920) (17839+8920= 26759)

Supplying, installing, testing and commissioning FRLS, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU (111=2% for FRLS)

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

Excavating soft murum / soft soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good complete.. (180x0.5x0.5)

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying , Installation , Testing And Commissioning of Hinged Metal fire door 1200 x 2100 mm 120 min fire rated un insulated single 50mm THK Honey Comb Infill single double RBT 143 x 57mm frame Straight with anchor fast erness frame 1.0 & shutter 0.9 mm powder coated to ral shade SFP SS Ball bearing 4" x 3" x 3"mm hionghed for steel doors ingersoll rand briton 121, NCE. SES Door closer size 3 with standard ARM , sprayed silver finish SFP SS sashlock with 70mm back set and 24 mm for end , SS lever handle 22x 125 mm on rose , Euro PROFILE CYLINDER 70 mm with both side key. 29 SS strike plate Escutchenos schott pyran fire rated clear Glass 6mm thick 240 x 340 33 Hinged Metal Fire Door 1200 x 2100 mm, 120 min fire Rated.

Supplying, installation, testing and commissioning of main fire pump (MFP/DP) suitable for water discharge of 1600 to 1800 LPM at 70 to 50 m head driven by 45 HP or suitable HP capacity diesel engine at required working speed suitable for manual/automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body & bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine, exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/SSC/DP

Supplying, erecting, testing & commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 mm thick CRCA sheet, compartmentalised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring & cabling along with allied accessories with following incoming and outgoings, suitable for automatic & manual operation on 415V, 3 phase, 50Hz ac supply as per specifications the capacity of electric motor driven pump are as follows a. Main fire pump(MFP) having capacity of 22kW 1no (1 working) b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode) comprises of the following features & switchgears: 1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating. 2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's, starters & outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etc. 3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating.

For main electric motor driven fire hydrant system pump of 37kW capacity & relevant capacity jockey pump add Rs.

Supply, installation and testing of stainless steel corrugated flexible pipe (hose) for dropping sprinklers below false ceiling ,pipe shall be 16 bar pressure rating and 1000mm long 25mm dia with union /reducer collar,clamps etc. as required.

Supplying, installing, testing and commissioning of Fire Exit Sinages Acralic sheet with autoglow sinages.

Supplying, installing, testing and commissioning of 100 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 300 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete up to net meter Installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG.

Supplying, installation & marking of surge arrestor / surge protection device at the main distribution board after the incoming breaker of type 1+2 tested for Imax 100 kA for three phase and neutral with compliance to IEC 61643-11 as per specification no. CP-SPD

Supplying and erecting AC three phase HT CT multifunction net meter DLMS compliance of accuracy class 0.5, 3x 63.5V, 50Hz, with backlit LCD display, optical port & RS 232 port( measures import kWh, kVAh, export kWh, kVAh, net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power) with wiring connections and mounting hardware on provided panels complete with calibration certificate from manufacturer.

Supplying and erecting Three phase smart energy meter DLMS compliance with 3x240V 50 cycles AC supply 10-60 A, ISI mark, accuracy class 1.0 with backlit LCD display, measuring & display V, I, kW, kWh, PF, kVA, kVAr, MD, day, week, month & with communication module configurable for GSM/Wi-Fi, IrDA/Bluetooth, complete provided panel with calibration certificate from manufacturer & duly wired with required size of PVC wires.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting Iron, sheet metal work consisting of CRCA Sheets, Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority (42 (L) mtr X 29 (W) mtr X 1.8 (H) mtr )

Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR

Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA/SOC

Supplying, erecting, testing and commissioning stand mounted/ handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA/MCC

Supplying, erecting, testing and commissioning of 0.75 sq. mm speaker wire complete.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying, erecting, testing and commissioning of 10HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter /control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 12HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/ suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/ control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/ VRV technology microprocessor based control compressor starter/ control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 16HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/ VRV technology microprocessor based control compressor starter/ control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 18HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/ digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supplying, erecting, testing and commissioning of 20HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.3TR (1165 cfm) to 4.0TR (1218 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.

Supply, installation, testing and commissioning wireless remote control having colour LCD panel, real time clock, temperature limitation (16 to 30° C, functions like filter clean reminder timer suitable to communicate with wired controller complete

Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with upports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 41.3mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application ofmulticoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 34.9mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

supplying, laying/fixing, testing and commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Providing and fixing on walls/ceiling/floor 20 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete

Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

Supplying and laying HMS PVC conduit FRLS grade 32mm dia. With necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC.

M/s Super Construction Co Nagpur