PROVISION OF ADDITIONAL 01 SINGLE LIVING ACCN FOR OFFICERS ON 3RD FLOOR OF CGOM BUILDING AT BHUBANESWAR

Amount

Carefully Dismantling of RCC Roofs , Floors (other than Ground floors), beams, stair case, landing, Chajjas and similar suspended works etcby electric bracker of (HILTI or other equivalent machine). Reinforcement cut as required to facilitate demolition complete all as specified and directed.

Dismantling Brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition of Cement concrete of any description and in any position not otherwise specifically provided (reinforcement cut as required to facilitate demolition) for complete all as specified and directed.

Taking down plastering on lathing , without removing lathing, incement lime or cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed.

M&L for RCC M-30 DESIGN MIX as in Columns, pillars, piers,posts and struts complete all as specified and directed.

M&L for RCC M-30 DESIGN MIX as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC M30 DESIGN MIX in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to sides of pillars,posts, struts, piers, columnsand stanchions complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, over hangs,etc. also splays between floors and beams, etc complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

-Ditto- all as per item No-11, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L for Brick work with fly ash bricks in one brick thick wall, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM 1:4 complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished,even and smooth with out using extra cement complete all as specified and directed.

M&L for Rendering 15mm thick in two layer 5mm thick in CM(1:4) with WPC over 10mm thick in CM (1:6) External on fair faces of brickwork or concrete surfaces complete all as specified and directed.

M&L for Rendering 5 mm thick in CM (1:3) in ceiling finished,even and smooth with out using extra cement complete all as specified and directed.

Supply Only Liquid water proofing compound complete all as specified and directed.

M& L for Preparation of Newly plaster Surfaces & Applying Two coat of Acrylic Washable Distemper over one coats of primer and with minimum 1.5mm thick wall care putty on wall complete all as specified and directed.

M&L for Preparation of Newly plaster Surfaces & Applying Two coat of Acrylic Wasable Distemper over one coats of primer in celing complete all as specified and directed.

M&L for Preparation of Newly plaster Surfaces & Applying Two coats of Exterrior emulsion anti fungal weather coat over one coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of wall care putty to make surface free from all undualations and applying texture paint over a coat of base coat and primer complete all as specified and directed.

M&L for 10 mm thick cement plaster in CM(1:4) over roof top surfaces with WPC and finished even and smooth without using extra cement before laying APP Membrance complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application over Applying evenly a tack coat of industrial bitumen 85/25 at the rate of1.2 kg per sq.m including cleaning surfaces and two coat of Bituminus aluminium paint over roof complete all as specified and directed.

M&L for 35mm thick (average) PCC 1:2:4 ,Type-B0 using 12.5mm graded stone aggregate For level course complete all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

M&L for Double charged Vitrefied Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screen bed 1:4 complete all as specified and directed.

M&L for 18-20mm thick Granite in any colour as approved by Engineer-in-Charge/GE work(table rubbed and polished)in shelves,steps, jambs, pillars, window-cills, cooking platformsand like in cementmortar (1:4) including pointingin white cement (1:2) usingmarble dust with admixtureof pigment to matchwith shade of granite. incement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F Upvc door frame sections dimensions will be 67 x 62 mm and the door shutter sections dimensions will be 67 x 115 mm provided with required G.I reinforcement along with required hardware for the locking purpose and toughened glass 5mm thick in two layer filled with argon gas(Double Glazed Unit) for acoustic proof including mortice lock and all builder hardware fittings complete as per manufacturer's instructrions complete all as specified and directed.

S&F Upvc 67 series acoustic proof casement (openable)windows off double glaze 5mm thick toughened glass in two layer filled with argon gas (Double Glazing Unit). Outer frame section will be of size 67 x 62 mm dimensions and sash / mullion section dimensions will be 67 x 78 mm or as per requirement 'z' mullion and false mullion section Dimensions is 67 x 58 mm and 67 x 61 mm respectively . Double glazing bead of size 25.8 mm x 23 mm will be provided along with EPDM gasket to the frame sections / mullion & shutter sections including all builder hardware fittings complete. All the frame and shutter mullion section reinforced with required G.I Profile for the strength off the frame and shutter sections as per manufacturer's instructrions complete all as specified and directed.

S&F Upvc 67 series fixed type acoustic proof double glazed Unit glass with multi pannel not exc 1.08Sqm each (Three member in horizontal and for vertical member not exc 0.90m interval vertical section to make a fixed glazing) window 5mm thick toughened glass in two layer filled with argon gas with all necessary hardware. Frame section of size 67x62mm dimensions and mullion section of size 67x78mm along with G.I profile as reinforcement. Glazing bead will be provided with EPDM gasket to hold the glass etc complete all as specified and directed.

S&F for DG-916,Aluminium Decco Grill fixing in clips with aperature 50x50mm size complete all as specified and directed.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

M&L for 100mm long Butt hinges,SS, with SS hinge pin, bright polishedand fixed, complete all as specified and directed.

M&L for 125 mm long Extruded aluminium alloy handles, fabricated type,anodised complete all as specified and directed.

M&L for 125mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for Door closer hydraulically regulated,designation No. 3, universal type, suitablefor door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and directed.

S&F Brass chromium plated bottle traps 32mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, etc fixed to walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints etc fixed to walls complete all as specified and directed.

S&F for brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F for Towel Rack brass chromium plated of 60 cm long fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F for Towel Ring of 200 mm dia PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S&F 20 mm Bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 25 mm Bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15 mm dia fancy type CP Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15 mm dia fancy type CP two way Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15 mm dia fancy type CP Stop/angle valves, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F 15 mm dia Brass CP mixer,Fancy Type for mixing hot & cold water screwed down for iron pipe and fixed in wall mixture complete all as specified and directed.

S&F for PVC connections 15mm dia with PTMT nuts of length 450mm complete all as specified and directed.

S&F GI Tubes 20mm dia, 'Medium grade' galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Ditto all as per item No. 57 above but 25mm dia GI Tube complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with brass chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F Toilet paper holder of brass Chromium Plated. fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

S&F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bend complete all as specified and directed.

S&F 110 mm dia PVC (SWR) door Tee complete all as specified and directed.

S&F 110 mm dia PVC (SWR) Cowl complete all as specified and directed.

S&F 75 mm dia PVC (SWR) bends complete all as specified and directed.

S&F 75 mm dia PVC (SWR) Cowl complete all as specified and directed.

M&LF for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equaln flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section(not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.and including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting levelfixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre,including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish withProviding and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth.and applying two coats of oil bound distemper over alkaline resistance primer complete all as specified and directed. (Note : Frame work for ceiling shall be measured and paid separately)

M&L for Cup Board With 20mm thick HDHMR Board with inner face 0.8mm laminate and 1.0mm th laminated of exposed surface with proper edge binding 0.8mm and 2 mm with pvc tape including all fittings and fixture complete all as specified and directed.

S&F 300mm long Stainless Steel handle complete all as specified and directed.

S&F Soft Closure Stainless Steel Auto hinge complete all as specified and directed.

S&F for Stainless Steel 25mm dia fancy type curtain rod complete all as specified and as directed.

S&F for Stainless Steel fancy bracket for fixing curtain rod complete all as specified and as directed.

S&F Zebra Blinds/Roller Blinds of size from 25mm to 75mm as required for Windows Home Décor Windows Zebra Blinds for Window Roller Blinds Room Darkening Roller Blinds for home, Office of window complete all as specified and directed

M&L for shower panel having built in rainfall, water fall, showerhead ,high-powered body spray jets,and high-efficiency handheled shower wand all shower dunctions can be used simultaneously all-in-one shower tower system designed for wall mount installation or drilling Brass Mixture and diverterlt includes head shower with cascade waterfall hand shower 4 to 06 Nos of jets and spout complete all as specified and directed. (Make-Jaquar Model No.JPL-WHT-ST86113 or equivalent in Hindware/ Parryware)

S&F for Concealed flush valvemetopole dual flow 32mm with concealed shut off provision and rectangular dual flush plate ABS Chrome plated 6 ltrs capacity complete all as specified and as directed. Make:Jaquar Model No FLV-1085 DFP or equivalent in Hindware/Parryware)

S&F for Vitreous China Rimless wall mounted water closet with complete set of size (370 X 545 X 370)mm complete all as specified and directed. Make:Jaquar Model No DRS-WHT 37951 or equivalent in Hindware/Parryware.

S&F for Ceramic vitreous China Table Top wash hand basin of size 425 X 340 X 175mm including all fittings and fixtures complete all as specified and directed. Make-Jaquar Model No CNS-WHT-903 or equivalent in Hindware/Parryware.

S&F CP Health faucet with 8mm dia 1.20mt Long flexible tube with wall hook complete all as specified and directed. Make Jaquar Code-ALD573 or equivalent in Hindware/Parryware.

S&F for Pillar Cock 315mm long extended body and aerator complete all as specified and as directed. Make-CERA Cat Part No F2013102-1A or equivalent in Jaquar/Johnson.

S&F Cabinet Mirror of size 450 X 350MM complete all as specified and dierected. Make:Prayag/Watertec

M&L for WALL PANELING Providing and Fixing Channelled Woodworks perforated panels of width 192mm, thickness of 15mm and length 2400 mm(weight-8.5 kg/Sqm)made of a Moisture resistant fibre board substrate with a laminated facing as per the approved shade (Portland Maple, Sea Beech, Siam Wood & Mystique Walnut, Interior White, Alumina Pearl) and a melamine balancing layer on the reverse side. The boards shall have a special perforation pattern where the reverse surface has a “Helmholtz” fluted perforation with consecutive 3mm wide groove followed by 13mm of visible pane. The edges of the panel shall be “tongue-and-grooved” to fix special clips for installation and seamless visual. The back of the perforated panel shall have sound absorbing non-woven Soundtex acoustical fleece hot pressed to achieve NRC of 0.6. (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 and Humidity Resistance (RH) of 70% with camber limit less than 1mm/1000mm and bow less than 1mm/300mm.The panels shall be mounted on special aluminium splines (keel) using inside clips provided by manufacturers and approved by the Architect/ Engineer-in-Charge. INSTALLATION: - An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install Aluminium Extrusion of size 3000(L) x 24(H) x 15.5(W) mm fixed with clip as approved by the Architect on the solid wall/partition to provide level and plumb surface for fixing Keel. Install Keel vertically using screws and plugs at spacing of not more than 600mm centre-to-centre. The first and last keel should not be more than 150mm from the ends. Trim the tongue of the first bottom panel and install using headless nail with groove side upward. Subsequent panels are installed with tongue side downward by engaging with each other using tongue and groove mechanism and secured by inside clip. Continue this process until required height is achieved. Shorter butt edges need to be joined using industrial/wood glue. The keel shall also be used for transition of the butt end of adjacent panel at every 7.2m. Install the Skirting (provided by others) of width 50mm or more as required by the Architect/ Engineer-in-Charge. Finish off the edges using wooden moulding of matching colour (by others). Installation should be carried out as per manufacturers recommended procedure.

M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and providing Non-Shrink, Cementitious Micro Concrete using Rendroc RG' manufactured by M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. modified with 12mm graded, clean, saturated surface dry crushed stone aggregate in the ratio as per manufacturer's instructions, as in columns, beams and similar structural members including use and waste of water tight formwork to facilitate pouring of micro concrete complete all as per manufacturer's instructions and finally rendering 15 mm thick in Cement Mortar 1:3 and finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and complete all as specified and directed. [Note: Measurement shall be considered for circumference at centerline of core thickness]

Material and labour for sub main wiring with two single core PVC insulated, PVC sheathed stranded copper conductor (FRLSH) cable of size 2 x 10 sq mm unsheathed drawn in and including PVC conduit and 1 x10 sq mm PVC insulated unsheathed copper conductor as continous earth continuity conductor complete all as specified and directed. Note – 2 Nos of single core cable along with earth wire and PVC conduit shall be measured as one length.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

M&L for Modular switch 1 way 6A, 1 module complete all as specified and directed.

S&F Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 1 way 16A,1 module complete all as specified and directed.

Supply and fixing white modular cover plate with frame including metal flush box 1 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame including metal flush box 2 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame including metal flush box 3 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame including metal flush box 4 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame including metal flush box 6 Module complete all as specified and directed.

S&F sheet metal enclosure double door DB SPN 8 way, 240 V with 200 amps rated bus bar complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with SS 304 grade inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole & Neutral and 32 Amp current carrying capacity in the MCB DB complete with connection testing andcommissioning complete all as specified and directed.

Material and labour for point wiring for light point or fan point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade IS694-1990 controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn in and including 25 mm dia PVC non metallic conceal conduit complete and making good the disturbed surafce complete all as specified and directed.

Ditto all as per item No.100 hereinbefore but for One 3 pin socket outlet 5/6 Amps, on the same board with other switches

Ditto all as per item No.100 hereinbefore above but with 2.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade for one 3 pin 15/16 Amps socket out let controlled by one switch on independent board.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep 50 Watts with, blades, frame and louver complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F in sheet metal enclosure with socket plug top and MCB with single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amp 240 Volts complete all as specified and directed.

Supply and install 2 Ton split type Air conditioner with hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating including all copper piping, joints, civil work for boring hole and metallic stand for outdoor unit complete all as specified and directed.

MAHIRA ENGINEERING & INFRASTRUCTURE (BID ID -3131502)

boon construction company (BID ID -3131543)