REPAIR TO ROAD PATH HARDSTANDING CULVERT AND ROAD FURNITURE ETC AT J1 and J2 LOCATION UNDER AGE BR I OF GE EAST JRC

M & L for repair to pot holes any depth not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in road path etc cutting around edges, at least 25mm in depth and making good by applying tack coat using paving bitumen @ 5 Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder using paving bitumen @ 9.8 Kg Per Ten Sqm blinded with 0.09 cum stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) depth of pot hole exceeding 30mm complete all as specified and directed.

M&L for premix bituminous macadam laid/rolled and compacted required gradient and camber (consolidated thickness 75 mm or less). with paving bitumen any penetration @ 4% by weight of total mix complete rolling to uniform smooth surface with 8 to 10 tonne power road roller complete all as specified and directed.

M&L for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat of paving bitumen VG -10 at the rate of 5 Kgs per 10 square metre of existing road surface laying bituminous pre-mix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content paving bitumen VG 30 mixed in hot mix plant, laid, rolled and compacted to required camber and gradient with 8 to12 tonne power road roller complete all as specified and directed complete all as specified and directed.

M&L providing and marking broken centre line /side lines /Zebra lines on road pavement and the like of any description and width with thermoplasitc paint hot applied with machine conforimng to BS-3262 and according to the specification laid down by IRC & MOST (Ministry of Surface Transport) specification 2001(4th revision) complete all as specified.

Supply and fixing road studs high density reflective lens ABS plastic body yellow coloured 90 x 100x 17 mm fixed with nails and adhesive make - 3M-290 Series. or Equivalent including taking down old road studs in any type.

S&F DUAL-DIRECTIONAL delineator made out of 16 guage MS Rectangular pipe of size 25 x 68 mm and of length 600 mm. Pipe stove enamelled and baked to 120 degree C/Powder coated. Head made out of ABS Plastic rectangular moulded with flat face provided with High Intensity Prismatic Reflectors of colour (white/yellow/red) of size 100 x 125 mm (total height 750 mm) with additional 2 reflective strips of 25 mm wide on both sides, fixing complete all as specified and directed. Including taking down old delineator in any type.

M&L for preparation of old painted concrete surfaces of any description over 10cm girth or width and applying one coats of synthetic enamel paint of any colour, complete all as specified and as directed.