73/SE/C-III/RB/KMDA of 2026-27 Dt.- 09/10/2026 (Sl No 03)

Clearing grass and removal of rubbish upto a distance of 50m outside the periphery of the area

Tack Coat providing and applying tack coat with Cationc Bitumen Emulsion of approved grade conforming to IS:8887 - 1978 on the prepard surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion , hire charges of machinery and labour, cost of fuel and lubricants all complete as per clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (I)on Bituminous Surface (Using Bitumen Emulsion at the rate of 0.20 to 0.30 kg par sqm)

Providing ,laying and rolling of Bituminous cold mix on prepared base consisting of a mixture of unheated mineral aggregate and emulsified, including mixing in a plant of suitable type and capacity ,transporting ,laying ,compacting and finishing to specified grade and level as per clause 518 of specification for Road & Bridges.

Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). C) RCC Grade M20 I) Using Concrete Mixer

Supplying, binding, fixing etc. including initial straightening, cutting to requisite length, hooking and bending to correct shape, placing in proper position of uncoated HYSD reinforcement bar in sub-structure complete as per drawing and Technical Specifications (Reference to MORT&H's specifications 1600 & 2200).

Priming one coat on timber or plastered surface with synthetic oll bound primer of approved quality including smoothening surfaces by sand papering LUMP SUM

Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturers specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In ground floor, Two Coats.

Providing and laying 25 mm thick mastic asphalt wearing course with approved grade bitumen of NH Schedule of meeting the requirements given in table 500- 39, prepared by using mastic cooker and laid to Rates 2019-20 required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine-grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 100°C, protruding 1 mm to 4 mm over mastic surface, all complete as per clause 516 (Reference to MORT&H's specification clause 516 along with IRC:107). i) 25 mm Thick

Cleaning rubbish, sludge, weeds, scum liquid earth, mud etc From road side masonary drain /hume pipe drain /culvert etc by mathor labour after removing concrete slab / manhole cover etc without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc by using iron pans, buckets including all labour tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity with municipal loading corporation rules for such disposal including loading into truck and cleaning the road side in all respect as per direction of the engineer in charge.

GST @ 18 % on sl.no. 01 to Sl No 09