Upgradation of existing non functional PCs of Tourism Department at various location in Kashmir Region (location Zeberwan Park )

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10mm to 25mm.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Thickness above 10 mm upto 25 mm.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area beyond 3 sqm.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Engangement of plumber for removing old damaged sanitary items I,e Bib cock, wash basin WC urinals etc including removing of all necessary fittings and stacking complete job.

a) Plumber.

b) Helper.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure upto level V including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing G.I pipes complete including trenching and refilling etc of approved brand and manufacture of preffered make PARAKASH SURYA, JINDAL (external + Internal work)

a) 15mm nominal bore.

b) 20mm nominal bore.

c) 25mm nominal bore.

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)

a) 15mm nominal bore.

b) 20mm nominal bore.

c) 25mm nominal bore.

Providing and fixing of following CP fittings.

a) Angle valve 15mm.

b) Bib cock 15mm.

c) C.P connection 600mm long.

Providing and fixing of PVC fittings of approved brand and manufacture complete job as desired by EIC.

a) PVC pipe 100mm.

b) PVC pipe 50mm.

c) Plain bend 100mm.

d) Plain bend 75mm.

e) Door bend 75mm.

f) PVC reducer 100/75.

g) PVC pipe 150mm.

h) PVC reducer 100/150.

i) Floor trap 100mm.

j) 15mm Ball valve.

k) Grating 100mm dia.

l) Waste pipe.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes.

Providing and fixing, in position concealed G.I section for wall panelling using board of required thickness fixed on the ‘W’ profile (0.55mm thick) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55mm placed @ 610mm C/C in perimeter channel having one flange of 20mm and another flange of 30mm with thickness of 0.55mm and web of length 27mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610mm C/C with fully threaded self-tapping dry w all screws. Board is fixed to he ‘W’ profile with 25mm countersunk ribbed head screws @ 200mm C/C, all complete as per the drawing and directions of engineer- in-charge. The joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish 8 mm thick Cement bonded wood particle boards per IS:14276.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and fixing white vitreous china flat back half stall urinal of size580x380x350mm with White P.V.C automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required: Single half stall urinal with 5 liter P.V.C automatic flushing cistern.

Construction of brick masonry manhole of cement concrete 1:2:4 with plastering the inner surface 1:4 cement mortar with a coat of floating cement concrete with MS manhole cover and frame all complete as per the directions of EIC (2’0”x2’-0”)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (35mm)

Providing and fixing of 1.5HP electric motor of approved make and quality including all fittings and fixtures complete job.

Providing and fixing of manhole cover of cast iron 1'-6" x 1'-6" over pits including frame work complete job.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil.

P/L stone soling (Hand packed) in trenches incl. ramming, dressing, watering etc. incl. all leads, lifts and carriage upto site of work complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge.

Providing and laying, fixing electrical / heating points consisting of 1.5mm and 4mm wire (Havels, insulated copper multi stand copper wire 6 amp, and one way switch to mm thick pvc conduit / channel with bend junction boxes etc S poles and MCB, 10 amp DP MCB, 2 way Db for housing MCB 16 amp switch 10 amp switch 2 way Db high laminated sheet with wooden box recessed in walls with acceries including all fittings complete in all respects.

a) Electrical points / lighting points with LED lamps.

b) Heating points.

c) Exhaust fan 12”x9”

Carriage of materials from source to site of work by mechanical means.

a) Stone aggregate for an avg. lead of 40 Kms

b) Sand for an avg. lead of 15 Kms.

c) Bricks avg. lead of 15 Kms.