INSTALLATION, TESTING AND COMMISSIONING OF 5000 GPH X 325 METER HEAD HC PUMP MOTOR SET AT PUMPING STATION PARNOTE STAGE-0

Amount

Installation, testing and commissioning of 5000 GPH x 325 meter head HC pump alongwith prime mover (to be provided by the department) at pumping station Parnote stage-0 by way of shifting of pump and motor (stacked near pumping station Gool of PHE Division Ramban) using tools and tackles, manual labour, crane and mechanical transportation (Departmental vehicle) to Parnote stage-0 Doda and subsequently unloading using crane, tools and tackles, manual labour and stacking at a safer place inside pumping station Parnote stage-0. The job involves dismantling of old wornout HC pump and motor at pumping station Parnote stage-0 by way of disconnecting of all incoming electrical connections, decoupling of pump and motor and then unfastening from base frame, suction and delivery . Cutting of worn out suction and delivery bends, pipes, dismantling of old unserviceable sluice valves, reflux valves fitted with suction/delivery lines, plugging of open end of delivery pipe line by Fabrication/fitting of blind flange of suitable thickness with rubber gasket, nuts, bolts etc. to withstand the pressure as well as velocity head created during running of other pumping unit. Laying of base frame on the existing foundation block and bed frame by way of welding together with grouting work, reinforcement with round bars and concreting work as per site requirement. Job further includes dragging of pump motor set from the stacking place and then placing them on the base frame by manual labour and other tools and tackles. Leveling of pump motor set on the base frame by using laminated sheet, strips and coupling and fitment thereof. Laying of 80mm dia GI suction and 80mm dia GI delivery pipe lines to the pump set by providing and cutting of 80 mm dia GI pipe as per site requirement (approximately 12 mtrs) in the convenient lengths with the help of oxygen acetylene gas. The cut edges shall be grinded with grinder to give them a smooth and even surface and then laying, aligning, welding of suction and delivery pipes in continuous weld including providing, fabrication and fitting of 80mm dia bends, flanges, reducers, gaskets, as per requirement, providing and fitting of 80mm dia CI sluice valve one no. alongwith nut, bolts, flanges, gaskets etc. on the suction side and cast steel sluice valve and NRV one no. each including nuts, bolts, gasket, flanges to the delivery pipe of pump set. Job further includes welding of delivery pipe end with manifold The weld should free from blow holes to have leak proof water tight joint. Job further includes providing and laying of 19/16 rating copper cable confirming to ISI standard from voltage stabilizer upto panel through MCCB and then further upto motor in six leads as per site requirement approx. 30 meters in length complete with thimbling and insulation work. Providing and laying of 185mm sq. aluminum cable single core from LT side of transformer to fuse set approximately 08 meters in length complete with thimbling and insulation material. Providing and fitting of 01 no-MCCB 160-200 ampere rating alongwith six nos. spreaders. Job includes testing of pump motor set with allied accessories on no and on full load. Complete job includes cost of material and equipments, transportation charges (other than pump & motor), manual carriage charges, skilled and unskilled labour charges, hire charges of tools ,tackles, crane etc. (complete job).

VEE AUTO TRADERS

Vaibhav Engineers and Technocrates