works1024

Supply & Fixing of Decorative LED Street Light of 1 to 3 watt with each, system lumens output with Efficacy > = 135lm/W (@6500k), It's body made of Die cast aluminium using pressure die-casting process. Hole for coupling on pipes Ø60 mm, for lateral installation. Silicon gasket enusures the IP protection. IP Rating-IP 66. Power LED Module with high efficacy LED's on single Printed Circuit Board with metal core plate. Colour Rendering Index : Ra>70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over-Voltage & Over-Current, with in-built surge protection upto 4kv (an additional surge protection device of 10kV also provided in-built the fixture). PF > 0.95 and THD<10%. Lens cover in PC (IK 09). Estimated LED Life time is L70 @1,00,000 hours minimum. LM 79-80 report from LED manufaturer should be submitted.Safety test report as per IEC 60598-2-3; IEC 60598-1/IS 10322 IEC 61347 i/c connection wire , testing etc-SupportingTest Report from NABL approved lab, with 5 year on site warranty. DEcorative street light 200 watt

Providing, supplying, and fixing of double arm bracket with top (upper) mounting provision, suitable for installation on existing octagonal pole for street lighting applications. The bracket shall be fabricated from MS/GI pipe of suitable diameter (typically 48–60 mm OD) and required length (0.75 m to 1.5 m each arm), designed to support two side luminaires and one top-mounted luminaire Double side arms (symmetrical) with proper curvature/design Top spigot/vertical pipe (upper mount) for fixing additional luminaire Fabrication using heavy-duty MS/GI pipe with adequate strength Base clamp/plate arrangement suitable for octagonal pole mounting Hot dip galvanization or painting (1 coat primer + 2 coats enamel) Necessary nuts, bolts, washers, clamps, and supports (galvanized) Provision for cable routing (if required) The bracket shall be securely fixed to the pole at specified height using proper clamping arrangement, ensuring alignment, rigidity, and safety. The item includes all labour, materials, tools & plants (T&P), minor drilling, fitting, transportation, loading/unloading, and all incidental charges required for complete installation. Double arm Bracket

Supplying, installing, testing and commissioningof 11/0.4 KV 3Phase 50 cycle oil immersed, naturally cooled, outdoor type transformer connected delta on H.T. side and star on L.T. side,dehydrating silica gel breather on eye level, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50º Con load, oil filling hole with plug, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable boxon LV side, first filling of oil upto desired level and transformer installing on existing structure with all required materials arrangement as required ISI marked & as per IS specification, hand operated off load tap changer switch above 100 KVA, oil conservator with drain valve, plug 63 KVA and above 200 kva

Providing services for careful dismantling of existing octagonal pole (street light / HT / LT pole) from its foundation by using suitable tools & tackles such as crane, chain pulley block, or manual means as required, including disconnection of all fixtures if necessary. Lowering the pole safely to the ground without causing any damage. Carrying out thorough surface preparation by mechanical/manual cleaning, including wire brushing, sandpapering, scraping, and removal of rust, dust, grease, old flaking paint, and other foreign materials. Applying one coat of approved quality metal primer followed by two coats of synthetic enamel paint of approved brand, make, and shade, ensuring uniform finish and proper drying between coats as per manufacturer’s specifications. After completion of painting, lifting and re-erecting the pole in its original position, including proper alignment, leveling, tightening of nuts & bolts, grouting in foundation (if required), and ensuring structural stability The item includes all labour, materials, tools & plants (T&P), equipment, transportation, handling, loading/unloading, and all incidental charges required to complete the work satisfactorily..also including and replacing the pole damegs parts electrical wiring and fixture replacement.safety precautions must be strictly followed during dismentling and erection of pole

Providing services for careful dismantling of existing octagonal pole (street light / HT / LT pole) from its foundation by using suitable tools & tackles such as crane, chain pulley block, or manual means as required, including disconnection of all fixtures if necessary. Lowering the pole safely to the ground without causing any damage. Carrying out thorough surface preparation by mechanical/manual cleaning, including wire brushing, sandpapering, scraping, and removal of rust, dust, grease, old flaking paint, and other foreign materials. Applying one coat of approved quality metal primer followed by two coats of synthetic enamel paint of approved brand, make, and shade, ensuring uniform finish and proper drying between coats as per manufacturer’s specifications. After completion of painting, lifting and re-erecting the pole in its original position, including proper alignment, leveling, tightening of nuts & bolts, grouting in foundation (if required), and ensuring structural stability The item includes all labour, materials, tools & plants (T&P), equipment, transportation, handling, loading/unloading, and all incidental charges required to complete the work satisfactorily..also including and replacing the pole damegs parts electrical wiring and fixture replacement.safety precautions must be strictly followed during dismentling and erection of pole

Earthingwithcopper earthplate600mmX 600mmX3mmthick includingaccessories andprovidingmasonryencloser incement mortar, cover plate having locking arrangement on the top andG.I. watering pipe 20mmdia 2.7metre long etc. (but withoutcharcoalorcokeandsalt)complete as required

Addextra for usingsalt andcharcoal/coke forG.I.plateorcopperplateearthelectrode as required including excavation and refilling the pit in all type of soil, murrum

MCB SP 6Amp to 32Amp 10kA rating

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.