GE (P) AF/Gur-80/2019-20

Amount

Excavation in trenches in hard/dense soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles &stay etc complete all as specified and as directed by Engr-in-Charge.

Surface excavation in soft/loose soil not exc 30cm deep and getting out, avg 15cm depth complete all as specified and as directed.

Returning, filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and as directed by Engineer-in-Charge.

Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed by Engr-in-Charge.

M&L for PCC (1:3:6) type C-1 (using 20mm graded aggregate) solid block masonary built CM 1:6 exceeding 10cm width complete all as specified and as directed. by Engineer-in-Charge.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete work finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for 5 mm thick rendering in CM 1:3 on concrete surfaces in ceiling or on shelves etc finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.

M&L for two coat of cement base paint on wall incl preparation of newly plastered surfaces complete all as specified and as directed. by Engineer-in-Charge.

M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface of broken stones aggregate complete all as specified and as directed by Engr-in-Charge.

M&L for 75 mm thick in cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in Plinth protection including 6x10mm grove in every 3Mtr including bitumen mastic filling complete all as specified and as directed by Engr-in-Charge.

Supply only liquid water proofing compound mix cement concrete/cement plaster as per manufacture instruction all as directed by Engr-in-Charge. Make Dr fixit, M/S cico, Fosroc

M&L for 40 mm thick damp proof course in cement concrete 1:2:4 type B-0 using 12.50mm graded aggregate includingnecessary form work and applying a coat of industrial bitumen 1.5 Kg/Sqm and sand blinded complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plastered ceiling surfaces and treated with three coats of white wash complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in as in copping cill ,rounded or chamffered on edges including necessary form work complete all as specified and as directed by Engr-in-charge.

M&L for providing 75mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for reinforced cement concrete 1:1.5:3 (using for 20 mm graded crushed stone aggregate) in lintels upto 1.50 mtr and the like etc including necessary form work complete all as specified and directed by Engr-in-Charge.

M&L for reinforced cement concrete 1:1.5:3 (using for 20 mm graded crushed stone aggregate) in chajjas, shelves and the like etc complete all as specified and directed by Engr-in-Charge.

M&L for reinforced cement concrete 1:1.5:3 (using for 20 mm graded crushed stone aggregate) in slabs supported on walls, beams and columns and the like etc complete all as specified and directed by Engr-in-Charge.

M&L for formwork to sides of concrete in chajjas, shelves etc, with fair finished surfaces and similar works complete all as specified and as directed by Engr-in-charge.

M&L for formwork to soffits of slabs, bottom and sides of beams, with fair finished surfaces and similar works complete all as specified and as directed by Engr-in-charge.

M&L for formwork to sides of concrete slab not exc 20cm thickness with fair finished surfaces and similar works complete all as specified and as directed by Engr-in-charge.

M&L for 10mm dia and over TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-charge.

All as per item No 23 hereinbefore but 8-10mm dia TMT bars as in stirrups, spacers and binders.

M&L for non skid ceramic coloured tile 7 to 8mm thick (square/rectangular area of each tiles exceeding 0.11 Square but not exceeding 0.18 Sqm in floor over and including 10mm thick screed bed in cement motar 1:4 over 25mm thick PCC 1:2:4 type B-0 bedding, set and jointed in neat cement slurry and pointed in coloured cement to match the tile complete all as specified and as directed by Engr-in-charge.

M&L for glazed ceramic coloured tiles 300x200x7-8mm size as in walls set and jointed in neat cement slurry over and including 10mm thick in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting / dado etc complete all as specified and as directed by Engr-in-charge.

M&L for 60mm Machine pressed pre casted pressed cement concrete inter locking paver blocks glazed coloured up to 6mm on the top in any shape and size, strenth not less than M-35 including 25mm thick dry sand cushioning and grouted with sand over 25mm thick PCC 1:2:4 type B-0 bedding layer complete all as specified and as directed by Engineer-in-charge.

S&F stop valve 20mm bore, cast copper alloy, screwed down, high pressure with long shank or butterfly handle screwed both ends for iron pipe or union and fixed complete all as specified and as directed.

S&F 500 ltrs rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layer, hoisted and fixed in position including GI neeples, washers etc complete all as specified and directed by Engr-in-charge .

S&F Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situ-ation, complete all as specified and directed by Engineer-in-Charge.

S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situ-ation, complete all as specified and directed by Engineer-in-Charge.

S&F ball brass valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore complete all as specified and directed by Engineer in charge.

M&L for replacement of 100mm CI floor/nahani trap with grating including jointing and breaking/ dismantling any type of floor and making good cement concrete to the B-1 (1:2:4) and testing complete all as specified and as directed by Engr-in-Charge.

S&F 100mm bore cast iron bends any radius with oval excess door with cement joints, complete all as specified and directed by Engr-in-Charge.

S&F 100mm bore cast iron single branch pieces fixed with cement joints and with oval excess door complete all as specified and directed by Engr-in-Charge.

S&F 100mm bore cast iron spun soil, waste and vent pipes in any length with or without ears, with cement joints and fixed to walls complete all as specified and as directed by Engr-in-Charge.

S&F Angle Stop Cock 15mm Bore (dia), brass Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed, complete all as specified and as directed.

S&F Bib Taps 15mm Bore, Cast Copper Alloy, with crutch or butterfly screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed complete all as specified and directed by Engineer in charge.

S&F 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed by Engr-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and as directed by Engr-in-Charge.

S&F PVC waste pipe flexible type 25mm dia suitable for couplings 32mm & 40mm dia 600mm long complete all as specified and as directed by Engr-in-Charge.

S&F Vitreous China Wash Hand Basin 580X440mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed complete all as specified and as directed by Engr-in-Charge.

M&L for Vitreous China EWC Super constellation including cistern of size & 'S' trap as per Cat Part No 20032 (S-10/P-19) for EWC & Cat Part No 21050 for cistern of Make Hindware or equivalent in Parryware/Cera including CP brass helth faucet complete all as specified and as directed.

M&L Cement Concrete (1:3:6) Type C1 (20mm Graded Stone Aggregate) Bed for Drain Pipes of Bore 150mm including Packing under and Haunching against the Sides of Pipes after they are laid in Foul Condition and Testing, complete all as specified and as directed.

M&L 150 mm internal dia reinforced cement concrete pipe NP-2 laid in trenches and cement jointed complete all as specified and as directed by Engr-in-charge.

S&F stainless steel toilet paper holder suitable for 15cm wide toilet paper roll and fixed with CP brass screws complete all specified and as directed by Engr-in-Charge.

S&F Precast Cement concrete manhole/drain cover of size 900mm x 600mm x 70mm thick srounded with steel strip 70x3mm Reinforced as per manufacturer's design in Munufactured proccess laid over existing drain complete all as specified and as directed by Engr-in-Charge. Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE. (ii) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover.

S&F Vitreous China Urinal, bowl type, flat back, white (including flush pipe and waste pipe, Grating and Union for Discharge Pipe, Galvanised Iron 40mm dia ‘Light Grade’ Discharge Pipe, providing and Fixing Plug Bedding Urinal against Wall in Cement Mortar (1:2) securing Urinal Plugs with 60mm Long Brass Screw Pointing around Urinal back in Cement, fixing and Making Good disturbed Surfaces in Cement Mortar (1:3) and fixed complete all as specified and as directed by Engr-in-Charge.

S&F mild steel work confirming to Fe-290 gde, E-165 as in bands, hold fasts, bolts, wall ties, straps, supports and stay for rain water pipe, clamps and similar articles complete all as specified.

Supply and fixing PVC solid moulded Architrave door frame of size 50x47mm made out of min. 5mm thick coloured with plastic trim decorated PVC sheet reinforced with 2 Nos of 150mm long brackets of 15x15mm MS square tube of two vertical door profiles are to be reinforced with 19x19mm MS square tube of 19 guage WPDM rubber gasket weather seal tobe provided throughout frame the door frame shall be fixed to the wall using 100mm long MS screws through the frame by using PVC fastners. A minimum of 04 Nos screws to be provided for each vertical members and minimum 02 Nos of horizontal members, Make:-Rajshri,Sintex or Equivalent.

Supply and fixing of factory made PVC solid moulded Architrave door shutter consisting of frame made out of MS tube of 19 guage thickness and size of 19x19mm for styes and 15x15mm for topo and bottom rails. MS frame shall have a coat of steel primer of approved make and manufacturer. MS frame adhered with 5mm thick heat moulded PVC `L' chanel of size 30x75mm forming styles and 5mm thick, 100mm wide PVC sheet for top rail lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap inserted for top rail and bottom rail. panelling of 5mm PVC sheet to be fitted in MS frame to the styles and rails with 5mm thick 30mm wide PVC sheet beading on either side and jointed together with solvent cement adhesive etc Complete all as specified and as directed by Engineer- in- Charge. Make:-Rajshri,Sintex or Equivalent.

S&F3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and as directed by Engr-in-Charge.

S&F butt hinges cold rolled mild steel 100mm long medium weight, ISI marked fixed with CP brass screw complete all as specified and as directed.

S&F butt hinges cold rolled mild steel 75mm long medium weight, ISI marked fixed with CP brass screw complete all as specified and as directed.

S&F 250 mm long, Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F extruded anodised aluminum alloy handle 125mm long fabricated type ISI marked fixed with CP brass screw comlete all as specified and as directed.

S&F extruded anodised aluminum alloy handle 100mm long fabricated type ISI marked fixed with CP brass screw comlete all as specified and as directed.

S&F anodised aluminum barrel tower bolt of extruded section 150mm long ISI marked fixed with CP brass screw comlete all as specified and as directed.

S&F anodised aluminum barrel tower bolt of extruded section 100mm long ISI marked fixed with CP brass screw comlete all as specified and as directed.

M&L for providing 100mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed by Engr-in-Charge.

M&L for 20-25 mm thick machine cut Kota stone slab flooring over and including 15mm thick in CM 1:4 cement screed bed and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror type polishing complete all as specified and as directed by Engr-in-charge.

M&L for 18-20 mm thick machine cut Kota stone skirting over and including 10mm thick in CM 1:4 cement screed bed and jointed with gray cement slurry mix with pigment to match the shade of slab including rubbing and mirror type polishing complete all as specified and as directed by Engr-in-charge.

Removal of existing lenolium/PVC flooring etc of any description and in any position complete all as specied and directed.

M&L for PVC anti-static floor,(Electro static discharge floor/tiles) min thick 2.5mm. electrode diameter 5mm. The ground resistance on the floor surface Can quickly drain electrostatic charge, antistatic affect lasting, surface resistance discharge in acccordance with international GB6650-86 - a standard. Seamless floor as a whole, can achieve: dustproof, perserverance, abrasion resistance, solvent resistance, smooth and bright, color free, facilitate easy to cleaning and maintenance, inclunding neccesary preparation of floor as reqd levelling of surface,PCC work,tilling work,removing debris from side to out of MoD land etc.complete all as specified and as directed by Eng in Charge.

M&L for Cement Concrete 1:2:4 (20mm Graded Stone Aggregate) 50 mm thick, as in Floors, etc., and finished the Cement Concrete Surfaces Even and Smooth with using Extra Cement, complete all as specified and as directed.

M&L for Chequered Cement Concrete Tiles 300X300X 25mm thick pre printed colour , Set and Jointed in Neat Cement Slurry with Grey Cement and Pigment over and including Screed Bed 15mm thick in Cement Mortar (1:6) as in Path, complete all as specified and as directed.Make- (Make: JOHNSON/coral/Terafirma and similar

M&L for Framed work such as grills, gratings,etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and like fencing post and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed by Engr-in-charge.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in hold fast, door cill etc and similar works including form work and making good distrubed surfaces to mach with existing surfaces complete all as specified and as directed.

Cutting hole in existing brick wall built in cement mortar, area of hole not exc 150 Sqcm surface area complete all as specified and as directed.

M&L for preparation of new steel surfaces and aplying two coats of synthetic enamel paint over a coat of red oxide primer of any description, over 10cm in width or girth, not otherwise described complete all as specified and as directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mena radius built in cement mortar 1:4 complete all as specified and directed by Engr-in-charge

M&L for preparing new decorated surfaces plastered on walls including cornices plasters by brooming down or steel wire brusing, scraping down, smoke spots and M&L for applying two coat of exterior emulsion paint 100% acrylic of approved colour and shade by accepting officer complete over a coat of primer and over 2 to 3 mm thick birla putty punning complete all as specified and directed by Engineer-in-charge. Make-Asian (Apex Ultima) paints/Berger (Whether Dust proof coat long life) including necessary scaffolding.

S&F aluminium colour powder coated anodised door and shutter single or double leaf glazed/pre laminated board exterior quality partly glazed/pre laminated board exterior quality party glazed panels fabricated including aluminium anodised beading rubber and packing materials and shall be drilling in existing wall and thrust bolt suitable size complete comprising the following:- (a) Aluminium colour anodised door frame section 101.60x44.45x1.93 mm fixed as per spd (b) Aluminium colour anodised vertical section in shutter 85x44.45x2 mm as per spd & directed. (c) Aluminium colour anodised Top & style shutter section 95.25x44.45x2.00 mm as per spd. (d) Aluminium colour anodised handle 02 Nos in each shutter 200 mm long as spd. (e) Aluminium colour anodised handle 02 Nos in each shutter 150 mm long as per spd. (f) Aluminium colour anodised middle lock rail/bottom rail section 150x44.2.65mm cat No.20002. Make-Jindal (g) Six lever mortice lock brass Make : Godrej/Classic on in each door. (h) 12 mm thick particular board (pre laminated both face) exterior grade ISI Marked (j) Tinted glass/Plain glass 5mm thick Make : Saint gobain midgaurd. (h) Floor spring , Make Sandu (j) Hydrolic door Closer, Make-Sandhu Note: If ground requirement for full glass or full Panel contractor should provide as per direction of Engr-in-C.

S&F aluminium colour power coated anodised (shade or tint as directed by GE) window/ventilator frame section 100x44x2mm fixed with thrust bolt in walls by drilling (any number of leaf) comprising the following:- (a) Aluminium colour anidised (shade or tint as directed by GE) two shutter each size 44x44x2mm top/bottom/sides style. (b) Aluminium colour anodised butt hinges 4 Nos in each window 100 mm sizes as per spd. (c) Aluminium colour anodised tower bolt 3 Nos in each window 150 mm long as per spd. (d) Aluminium colour anodised handle 2 Nos in each window 150 mm long as per spd. (e) Tinted glass 5 mm thick Make-Saint gobain modigaurd (f) Aluminium Anodized colour coated grill make deco grill DG-104 fixed with For H Section.

S&F Grease trap of Lipumax NS 10n grease seprator made of stainless steel for ground installation acording to EN-1825 & Din 4040 with max diamensions 1820x1000mm with total capacity of appx 2000 ltrs, sluge capacity of 1010 ltrs and grease storage capacity of 615 ltrs, inlet and outlet connections of DN 150 disposal via direct suction line DN-65 PN-10 outlet flage and s10z hose quick coupling and blind cover for load class A-125 according to EN-124 with frame from concrete cover from cast iron clear opening as per outer dia cover odour proot and water marked by GMRR or equivalent including necessary excavation & earth work complete all as specified and as directed by Engr-in-charge.

M&L for second class hard wood plain fillet rectangular or triangular in section clean sawn secured with nails exceeding 13 Sqcm and not exceeding 25 Sqcm complete all as specified and directed by Engr-in-charge

M&L for 1st class hard wood plain fillet rectangular or triangular in section clean sawn secured with screws exceeding 3 Sqcm and not exceeding 6 Sqcm complete all as specified and directed by Engr-in-charge

M&L for 18mm thick pre-laminated particle board interior grade with one side choice laminate and other side with white laminate fixed on wooden frame work with screws as in wall panelling complete all as specified and directed by Engr-in-charge

Material and labour for point wiring concealed in and including rigid non metallic PVC conduit, medium grade, ISI market, 20 mm dia, with 1.5 sq mm FRHR PVC insulated & unsheathed, multi stranded copper conductor cable, single core, 1100 volts grade, including flush metal terminal boxes and factory fabricated (same make of modular type switches and sockets etc.) modular metal box, cover plates inner & outer, frames of suitable size and depth, FRHR insulated and unsheathed Multi standard copper conductor of 1.5 sqmm and connected to common earth dolly as continuous earth wire (Contractor shall concealed the conduit by making chases by cutter machine then after chiselling only) for one light point controlled by one switch complete all as specified and as directed.

All as per item No 80 hereinbefore but for 5/6Amp Socket outlet on independent board..

S&F ceiling rose, 3 phase PVC polycarbonate complete all as specified and directed by Engr-in-Charge.

S&F Switch modular 10 Amps, single pole one way complete all as specified and directed by Engineer-in-charge.

S&F modular type socket outlet shuttered modular type two module 3/5 pin, 6 Amps multipurpose complete all as specified and directed by Engineer-in-Charge.

S&F in replacement modular type socket outlet shuttered modular type two module 3/5 pin, 6 Amps multipurpose with shutter (753034 Make: KOLORS) complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Switch modular 6 Amps, single pole one way (753001 Make: KOLORS) complete all as specified and directed by Engineer-in-charge.

S&F in replacement Switch modular 16 Amps, single pole one way (753011 Make: KOLORS) complete all as specified and directed by Engineer-in-charge.

S&F in replacement modular type socket outlet shuttered modular type two module 3/5 pin, 16 Amps multipurpose with shutter (753035 Make: KOLORS) complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Mini RJ modem jack for computer Lucent (Cat 6) AT&T with shutter (753052 make: KOLORS) complete all as specified and directed by Engineer-in-Charge.

S&F in replacement modular plates, wood covered, 6 modules (753605 make: KOLORS) complete all as specified and directed by Engineer-in-Charge.

S&F Ventilating fan PVC body type 200mm sweep, 230 Volts, single phase, complete all as specified and as directed by Engr-in-charge. Make Havells/Bajaj/Philips.

S&F Indoor decorative LED batten with Opal diffuser LED 1x18/20 watt tube light fitting 4' long including LED tube 240 Volt complete with accessories internally pre-wired, complete all as specified and as directed by Engr-in-Charge. Make: Surya Cat Part No SLEBTNT8 20W OR C&S Cat Part No LTDC30120WLED/WD OR HAVELLS Cat Part No LHEXBTP7UN1W018.

S&F in replacement modular plates, wood covered, 12 modules (753608 make: KOLORS) complete all as specified and directed by Engineer-in-Charge.

S&F in replacement modular plates, wood covered, 4 modules (753604 make: KOLORS) complete all as specified and directed by Engineer-in-Charge.

S&F in replacement modular metal flush box, 4 modules complete all as specified and directed by Engineer-in-Charge.

S&F in replacement modular metal flush box, 6 modules complete all as specified and directed by Engineer-in-Charge.

S&F in replacement modular metal flush box, 12 modules complete all as specified and directed by Engineer-in-Charge.

Notes:- (a) The amount of Rs. 5,587/- against Schedule of Credit on Page No. 145 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance.

M/S SURINDERAS CONSTRUCTION CO.

blue max associates

H.B. Traders

V.K. Enterprises

BRIJ MOHAN LAL AND CO.