Improvement of the Internal Road by providing CC Pavers block with Drain Culvert Gate and Sentry post at IGC Changsari Dist Kamrup

Amount

INTERNAL ROAD - Removal of unserviceable soil including excavation, loading and disposal up to 1000 meters but excluding replacement by suitable soil which shall be paid separately as per clause 305. In damage portion because of weak sub grade (black cotton soil)

Excavation for roadway in soil using manual means using cut earth to embankment in the immediate vicinity.)

Construction of sub grade and earthen shoulders with approved materials obtained from borrow pits, transporting to site spreading, grading to required slope and compacting to meet requirement of table 300-2 (including land compensation of earth) (a), (Including cost of testing of materials at site and laboratory as directed by the deptt.) a) from private land

Granular Sub-Base with close graded material (Table: 400-1) (B) By Mix in Place Method Construction of Granular Sub-Base by providing close graded material, spreading in uniform layers in with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density, complete as per Technical Specification Clause 401 (Including cost of testing of materials at site and laboratory as directed by the deptt.)

Water Bound Macadam Providing, laying, spreading and compounding stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, roller with vibratory roller 80-100 tonnes in stages to proper grade and camber, applying and broomingrequisities type of screening/ binding materials to fill-up the insertices of coarse aggregate, watering and compacting to the required density. A. By Manual Means (I) Grading-II (b) Using Screening Type –B (11.2 mm Agg.) In damaged patches

Water Bound Macadam Providing, laying, spreading and compounding stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, roller with vibratory roller 80-100 tonnes in stages to proper grade and camber, applying and broomingrequisities type of screening/ binding materials to fill-up the insertices of coarse aggregate, watering and compacting to the required density. A. By Manual Means (I) Grading-III (b) Using Screening Type –B (11.2 mm Agg.)

Providing SUN ROCK HIGH CTS/DEVI paver block/ tiles of concrete grade M30 or above of approved quality, size, shape of specific thickness over a leveling bedding layer of 30 mm compacted sand over a base course of WBM or PCC (Base to be paid separately) including cutting where necessary finished with spreading, sweeping jointing sand and compacting the pavers using vibrating compactor as specified and directed. SUN ROCK HIGH CTS/ Devi tiles (pavers) (a) 80 mm thick

Plain/Reinforced cement concrete, in open foundationcomplete as per drawing and technical specification including steel shuttering formwork. (N) Without plasticiser A PCC Grade M15` PCC block support at both sides of pavers block for locking arrangement. In bye

DRAIN- Earth work in excavation for foundation trenches of walls, footings of columns ,steps and septic tank etc. including refilling the quantity as necessary after completing of works etc. bailing out water where necessary as directed and specified. (A) Up to a depth of 2 m below the existing ground level. (a)In ordinary soil

Providing soling in foundation and under floor at all level with stone/ best quality pickedjhama bricks, sand and packed and laid to level etc complete Brick flat soling

Providing and laying plain cement concrete with coarse aggregate of sizes 13mm to 32 mm in foundation bed for footing steps, wall, brick works etc as directed including dewatering if necessary, and curing complete. (c) In prop. 1cement :5 sand :10 coarse aggregate by volume

25 mm thick cement concrete topping 1: 2:4 (1cement :2 sand :4 coarse aggregate of 12 mm nominal size) finished a floating coat of neat cement finish (base concrete to be measured and paid separately) to be laid in panes including curing complete as directed

Brick work in cement mortar with 1st class brick including racking out joints and dewatering if necessary, and curing complete as directed. (I) In sub-structure up to plinth level including dewatering if necessary (a) In prop. 1:4

15mm thick cement plaster in single coat on single or half brick wall walls for interior plastering up to 1stfloor level including arises, internal rounded angle chamfers and/ or rounded angles not exceeding 80 mm in girth and finished even and smooth including curing complete as directed. B) On fair side ( b) In cement mortar 1:4

CULVERT - Excavation of by Manual Means Excavation for roadway in soil using manual means using cut earth to embankment in the immediate vicinity.) For main hume pipe

Plain cement concrete M10 (1: 3: 6 ) nominal hand mix) in leveling course below open foundation of head walls as per drawing & technical specification as per clause 1109 At both end for brick wall,

Bedding of pipe (i) Type A (concrete cradle) bedding Laying concrete cradle bedding with M15 grade cement concrete as per clause 1105 (i)

Providing and laying Reinforced Cement Concrete Pipe NP3 as per design in single row. Providing and laying Reinforced Cement Concrete Pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation , protection works backfilling, concrete and masonry works in head walls and parapet wall as per clause For 1000 mm dia culvert

Brick masonry work in cement mortar in foundation of head walls complete excluding pointing and plastering as per drawing and Technical Specification Clause 1109. (A) Brick masonry in 1: 4 cement mortar For 1000 mm dia culverts

Plastering with cement plaster (1:4) 15 mm thick on brick work in substructure as per technical specification. For 1000 mm dia culverts Bench portion,

GATE - Earth work in excavation for foundation trenches of walls, footings of columns ,steps and septic tank etc. including refilling the quantity as necessary after completing of works etc. bailing out water where necessary as directed and specified. (A) Up to a depth of 2 m below the existing ground level. (a)In ordinary soil.

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Providing and laying plain / reinforced cement concrete works cement with coarse sand and 20mm down graded stone aggregate including dewatering if necessary, and curing complete. (I) Using mixture machine (A) In Sub structure & Super structure Foundation, footing, columns with base, tie and plinth beam, base slab, like and other works not less than 100mm thick in all structure (b) M20 or prop. 1:1.5:3

Providing form work of ordinary timber planking so as to give a rough finish including cantering, shuttering, strutting and propping etc., height of propping and cantering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in: (ii) Using 25 mm thick plank Foundation, footing, base of columns, tie beam, Column, flat surfaces, beam etc for mass concrete works in all surfaces

Providing soling in foundation and under floor at all level with stone/ best quality pickedjhama bricks, sand and packed and laid to level etc complete Brick flat soling

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. in sub structure up to plinth level. b) In prop 1:4

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth. (A) 112mm thick brick wall (a) In cement mortar in prop. 1:4.

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (backing coat 15 mm and finishing coat 5mmthick) (b) In cement mortar 1 : 4

Cement plaster skirting with cement mortar in prop. 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement including rounding of junctions with floor. (b) 20 mm thick

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a) 2 Track sliding window (v) 5 mm coloured glass

Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. (i) 6mm clear glass

Applying one coat of cement primer of approved brand and manufacture on new wall surface after thoroughly booming the surfaces free from mortar droppings and other foreign matter and including preparing the surface.

Finishing old/ new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts).

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.b (ii) Super Ductile (SD) TMT reinforcement bars (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate)

Electricalworks: Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete (i) Short point up to 3.00 mtr length

(ii) Medium point up to 6.00 mtr Length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. i) Short point up to 3.00 mtr length

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. i) With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. i) With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supply, installation & testing of G.I. earth station with perforated 40 mm dia and 4.50 Metre long heady duty G.I. pipe with necessary 40 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

a) Extra for using salt (5 K and Charcoal (64 K in pipe Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the Deptt.

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. a) Standard model 1200 mm Sweep Usha make)/ Standard model 1050 / 1200 mm Sweep Havells make)/ High speed 1200 mm sweep (ORIENT PSPO make)

Supplying, fitting and fixing of ceiling fan regulator including connections etc. complete. a) Electronic type.

Supplying with fitting fixing of CFL/Fluorescent luminaries complete with all accessories as required and as directed by the department. a) Striplite luminaries complete with VPIT copper ballast and 1 X 18/20 watt Fluorescent tube.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc, specified and directed by the deptt. i) 8 way SPN double door

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor a) 2 Core A2XWaY A2XFaY i) 10.00 Sq.mm 2 Core armoured U.G. cable

Rana Construction and Engineers Pvt. Ltd.