ADDN/ ALTN TO SNCOS BILLETS BLDG NO. P-36 AND P-79 AT AF STN BKT

Amount

Demolition of cement concrete of any description and in any position and removing demolished material to 1.5 Km away from Defence land complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base of floor and finished rough to recieve the screed bed etc complete all as specified and directed.

Dismantling floor, or wall tiling including cement mortar bedding, terrazo dado from wall surface removing serviceable and rubbish off the premises complete all as specified and directed.

M&L for Non - skid Ceramic joint less light coloured tiles size 300mm x300mm x7 to 8 mm thick as in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15 mm thick screed bed in CM (1:4) complete all as specified and directed . (Make-: Kajaria Tiles/HR Johnson/Somany)

M&L for Glazed ceramic coloured tiles in vertical surfaces 300mm x 600mm x 7mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.. (Make-: Kajaria Tiles/HR Johnson/Somany)

M&L for machine cut Kota stone slab (Minimum size shallbe 550x550 mm) flooring 18-22 mm thick over and including screed bed or bedding layer of 20 mm thick in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing laid complete all as specified and directed

M&L for machine cut Kota stone 16-18mm thick, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing set and jointed in neat cement slurry and pointed in white or colour cement to match, the shade/colour of tiles over and including 10 mm thick rendering in cement mortar (1:4) as in riser of steps,skirting,dado & other vertical surfaces complete all as specified and directed.

M &L for half rounding to edges of Kota, Granite & Cudappah stone slabs on edge such as in steps, cooking platform, and other similar locations etc complete all as specified and directed.

M&L for Mirror polishing of old Kota stone flooring including pointing in colour cement to match with ixciding one complete all as specified and directed.

M&L for 18 mm thick Granite (Jet Black South Indian) work (table rubbed and polished) in Urinal partition, cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) to match with shade of granite, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoin, arches pillars but excluding ashlar facing dressed stone work and precast concrete article complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:4 ) complete all as specified and directed

Taking down cement plaster on brick or concrete surfaces walls/chajja/roof,facia at any height including racking out joints hacking for key scrubbing down with water etc and M&L for rendering 15 mm thick in cement mortar (1:4) walls mixed with liquid water proofing compound (ISI Marked) @ 2% by weight of cement finished even & smooth without using extra cement including mouldings chamfers splay srounded or coved angles. Beards grooves and rebate upto 10 cms in width or 15 cms in girth complete all as specified and directed. Note:- Supply only water proofing compound shall be measured and paid for seperately.complete all as specified and directed.

Supply only liquid water proofing compound ISI marked complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15 mm thick on brick or concrete surface of walls, in cement mortar (1:6) , surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surface of walls, in cement mortar (1:4) , surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation and applying two coats of oil emulsion distemper over one coat of primer on new puttied surfaces of walls complete all as specified and directed. (Make :- Asian Paint Tractor uno/Nerolac Beauty Acrylic/ Berger Bison

M&L for preparation and applying one coat of oil emulsion distemper on old distempered surfaces of wall complete all as specified and directed.(Make M/S Asian Paint Tractor/ Berger Easy Clean/ New beauty Acrylic).

M&L for preparation and applying two coats of oil emulsion distemper on non asbestos ceiling board on ceiling complete all as specified and directed (Make M/s Asian paint tractor/Berger Easy Clean/ Nerolac Beauty Acrylic).

M&L for preparation and applying one coat of white wash on old surfaces of ceiling complete all as specified and directed

M& L for applying 1mm thick wall care putty on new or old plastered surface of walls complete all as specified and directed.

M&L for preparing old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot mould, moss and treading oil and greasy spots from plasterd or unplasterd surfaces of ceiling including cornices,plaster etc and applying one coats of white wash complete all as specified and directed.

Taking down wooden chowkats or frames (without taking down shutter from the frame) not exceeding 1.5 Sqm each including cutting holes for taking out existing holdfast and making good in cement mortar (1:3) or PCC type (1:2:4) type B1 usining 20mm stone aggregate and repairing to broken jambs/reveals with plaster incl white wash of diatempering with putty as per existing surface complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 sqm each complete all as specified and directed.

M&L for complete removal or existing treatment of wall /Roof projections including fascia cornices etc by scrapping with mechanical sander(having mechanical vaccum mechanism) with sanding pad of appropriate girth to make surface clean free from dust loose paint etc by skilled labour complete all as specified and directed.

M&L for old/new plastered surfaces of finishing walls with paint of required shade applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm complete . Note: Emulsion to be carried out through air less spray machine.complete all as specified and directed. (Mechanical Means) Make :- Asian Paint Apex Ultima/Berger weather coat long life-10/Nerolac Excel Everlast.

M&L for preparation of old painted surfaces of walls and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. . with required shade of paint Emulsion paint shall be carried out through air less spray machine. (Mechanical Means) complete all as specified and directed. Make :- Asian Paint Apex Ultima/Berger weather coat long life -10/Nerolac Excel Everlast

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type 10mm deep CNC moulding design with 0.12 micron laminated both sides shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with and including stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat with double ribet of size 125x65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F 35mm thick FACTORY MADE WIRE MESH SOLID WPC Pre-laminated both side DOOR SHUTTER consisting of Density 650 Kg /Cum Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with Stainless steel wire cloth 0.36mm nominal dia and average width of aperature 1.4mm and XTN Aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19x6mm size steel screws etc, complete all as specified and directed.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type 10mm deep CnC moulding design with 0.12 micron laminated both sides shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved designpasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with and including necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 75x50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ISO certified board of 18mm thick pre laminated both side, shutter for KITCHEN cupboard, Room Cupboard and bathroom cupboard. The laminated shutter should be .12 microne pre laminated side with different design and other side plain white of density not less than 650 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity complete all as specified and directed.

S&F in repair 20mm bore stainless steel type curtain rod with fixing brackerts, stops, rollers etc incl holder as required complete all as specified and directed.

S&F in repair non asbestos fibre cement building boards 4mm thick laid/inserted to GI / Aluminium framework complete all as specified and directed.

Demolition of RCC Work as in cupboard shelves etc. complete all as specified and directed.

M&L for Machine cut Cudappah stone slab of 35-40mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishingcomplete all as specified and directed.

S&F 150mm long aluminium anodized handle cast type complete all as specified and directed.

S&F 200mm long aluminium anodized tower bolt and 10mm dia bolt complete all as specified and directed.

S&F continuous (piano) mild steel bright finish electrogalvanised width of flaps (when open) 40mm complete all as specified and directed.

S&F Hasp & staple aluminium safety type with mild steel hinge pin incl bolt to hinge plate and filed with screw size 100mm complete all as specified and directed.

S & F for 100 mm size butt hinges, medium weight cold rolled mild steel, and fixed complete all as specified and directed.

S&F windows made of per painted steel (base steel as per IS 513 of 0.58 mm thick "D" Quality galvanised as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns with alkyd backer . Section of frame should be of 72mm X 55mm , centre mullion should be of 72mm X 50mm, section for fixed glass beading should be of 12mm X 12mm and section for shutter glass should be of 52mm X 25mm. Outer frame & mullion sections should be of 12mm X 12mm and section for shutter glass should be of 52mm X 25mm. Outer frame & mulliion sections to have rebate for glazed shutters, fly mesh and 20mm provision for guard bar / grils fly mesh shutter section should be of 20mm X 40mm. Tee sections are to be cut to length mitre jointed with corner brackets. centre mullion to be fixed with mullion cap . shutter brackets with a inbuilt pvc lip to be fixed in a way that the lip overlaps the shutter corners and are not exposed. Stay handles 2Nos of heavy duty stain less steel pivot hinges shall be provided for shutter. The windows should be panelled with 4mm thick plain float glass. Rubber Gaskets are provided all around the glass. The above frame should be fixed to the concrete/masonary wall by means of self expanding, screws. Including 10mm square guard bar with 152.4mm pitch complete all as specified and directed. (Make : Elixir Met Form Pvt Ltd /A2Z Infra solutions/Urban space)

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised 100 mm long, type B-21 complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint to old painted steel surfaces of any description having width/girth exceeding 10 cm complete all as specifie including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where required complete all as specified and as directed.(Make :- Asian Apcolite Premium Gloss Enamel/Nerolac Synthetic High glass Enamel /Berger HI-Glass luxol )

M&L for preparation of new or previously untreated wood or wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer including necessary putty filling with knife of same colour where required to achieve smooth and even surfaces complete all as specified and as directed. (Make :- Asian Apcolite Premium Gloss Enamel/Nerolac Synthetic High glass Enamel /Berger Hi-Glass luxol.

M&L for applying one coat of synthetic enamel paint to old painted wood surfaces of any description having width/girth exceeding 10 cm complete all asspecifie including preparation and necessary filling by chalk, putty as and where required to make surface even and smooth complete all as specified and as directed.(Make :- Asian Apcolite Premium Gloss Enamel/Nerolac Synthetic High glass Enamel /Berger Hi-Glass luxol )

S&F GI tubes 'medium grade' galvanised, 15 mm bore, ISI marked and fixed complete concealed to walls with an including cutting chases and making good or laid in floors complete all as specified and as directed.

S&F in repair GI tubes 'medium grade' galvanised, 20 mm bore, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed .

S&F in repair GI tubes 'medium grade' galvanised, 25 mm bore, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking down complete all as specified and as directed

S&F in replacement Rotational moulded polyethylene water storage tanks of 500 litres capacity (white colour with threaded lid cover, minimum tripled layer , weight not less than 18 Kg), hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connectionscomplete complete all as specified and directed.

S&F in replacement Rotational moulded polyethylene water storage tanks of 1000 litres capacity (White colour with threaded lid cover, cylindrical minimum tripled layer, weight not less than 33 Kg), white, hoisted and fixed in position all as specified in SSR Part-I including ball brass valves, high complete, screwed for iron pipe or brass ferrule and fixed for 20 mm bore pipe, including making connectionscomplete all as specified and directed.

S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore pipe including making connections complete all as specified and directed. (Minimum weight 20mm-210 gms). (Make -: Prayag/ J K Rubber Industries / Supreme Industries.

S&F in repair Gun metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed, Bore dia of 20mm complete all as specified and as directed. (Make :- Zoloto/ Jagwar/ Kohler

M&L for 75mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 80/100 mixed with three parts of coarse sand by weight complete all as specified and directed..

S&F in repair sinks made of stainless steel 1.00 mm thick kitchen with drainage board plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1143mm X 510mm X 203mm bowl size 510mm X405mm X 203mm complete with waste coupling & PVC waste pipe complete all as specified and directed.. (Make :- Prayag CAT No. 1252DM/Jagwar/ Kohler.

S&F in repair PVC valveless,syphonic action type, flushing cistern, low level,white with inlet, ball valve, float and handle including brackets, PVC 32 mm 'L' bend of capacity 10.0 litres and making good to dismantled/damaged floor/surfaces, complete all as specified and directed.

S&F in repair WC Orissa pattern white with integral foot rest size 580mm x 440 mm including PCC bedding in (1:2:4) and making good disturbed floor connecting to trap and flush pipecomplete all as specified and directed.

S&F in repair CP Bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed for down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified complete all as specified and directed. (Make:- Jaquar/kohler/Grohe)

S&F in repair CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm iron pipe complete all as specified and directed. (Make:- Jaquar/kohler/Grohe)

S&F in repair Brass CP mixer for mixing hot and cold water screwed down for 15mm iron pipes, cast copper alloy, chromium plated, screwed for 15mm iron pipe ccomplete all as specified and directed.

S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fancy type screwed for 15 mm iron pipe, complete all as specified and directed.

S&F in repair PVC connection 15 mm x 450 mm including PTMT check nut at both ends screwed for iron pipe of 15 mm bore. complete all as specified and directed.

S&F in repair Vitreous China half stall urinals, complete including providing and fixing plugs, CP urinal spreader bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe. complete all as specified and directed. (Make:- Cera/Prayag/Jaquar/kerovit )

S&F in repair Vitreous China, wash basin white with pedastal, flat back , size 550mm x 400mm including brackets of any size, including cutting for and pinning in ends of brackets or erecting stand including fixing and supply of waste pipe of 32 mm dia, waste coupling complete all as specified and as directed Make:- Cera/Prayag/Jaquar/kerovit )

S&F sheet glass shelf assembley consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. (Make:- Cera/Prayag/Jaquar/kerovit )

S&F in repair Corner Glass Shelf (with Bracket)complete all as specified and directed. (Make:- Cera/Prayag/Jaquar/kerovit)

S&F in repair stainless steel Shop dish with PU foam complete all as specified and directed. (Make:- Cera/Prayag/Jaquar/kerovit)

S&F in repair Chromium plated, single towel rail 600mm long complete all as specified and directed. (Make:- Cera/Prayag/Jaquar/kerovit )

S & F for brass chromium plated shower rose 125 mm size with swivel joints,and connecting rod including fixing to steel pipe or union complete all as specified and directed. (Make:- Cera/Prayag/Jaquar/kerovit )

S&F in repair Brass CP mixer 15 mm bore dia for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. (Make:- Cera/Prayag/Jaquar/kerovit )

Dismantling PVC/Cement/CI pipes 50 to 110 mm dia including all fittings like bend,branch pieces, connectors, heel rest bend etc and removing from site complete all specified and as directed.

Supply & Fixing 100 mm bore sand cast iron pipes in any length with cement joint fixed to walls or laid in trenches or in floors complete all as specified and as directed

S&F cast iron sand cast 100 mm bore bends(any radius) sand cast iron pipes in any length with cement joint fixed to walls or laid in trenches or in floors complete all as specified and as directed

S&F cast iron sand cost 100 mm bore cast iron cowls complete all as specified and directed

S&F cast iron sand cast P- trap 100mm bore complete all as specified and directed.

S&F salt glazed stoneware stack clamp out of 50mm x5mm flat iron complete all as specified and directed

S&F in repair, UPVC (SWR) gully trap 150mm x 100 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F in repair to old wooden boarding planned both sides 15mm thick second class hardwood in fascia fixed with nails or screw complete all as specified and directed.

M&L for Removal of complete existing water proofing membrane of any description on roof ( including taking down plaster/Demolition of cement concrete if any) surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items etc complete all as specified and as directed.

M&L for P.C.C. (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope commplete all as specified and directed.

M&L for cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in benching , haunching kerb etc rounded or chamfered on edges including all necessary formwork complete all as specified and directed

M&L for screed Bed 10mm thck in CM (1:3) on PCC padding of roof surface finished even and smooth without extra cement and including mising of liquid water proofing compound measured and paid separately). complete all as specified and directed.

M&L for high performance hybrid polyurea elastomeric waterproofing coating cold applied of spray/brush applied,smartcare ultron liquid membrance with an elongation of 600% and tensile strength of 12.6 n/sqmm as per ASTM D2370,crack bridging ability of 3.5mm as per ASTM C1305,shore a hardness of min 75 as per ASTM D2240.The system includes final base preparation applying of epoxy primer with consuption @ 0.25kg sqm (appx) and applying in two coats at a coverage of 1.5kg/sqm etc as per manufacturer specification complete all as specified and directed

Demolition and breaking up drain pipe 150mm bore salt glazed stone ware /AC/PVC pipe complete all as specified and directed.

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M deep and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC (1:4:8) type D-2, using 40 mm graded stone agregate in filling and mass concrete complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removal of excavated soil to a distance not exc 50 meter and depositing where directed at a level but exc 1.50 M above the starting point complete all as specified

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate bedding to drain pipes 150mm internal dia of pipe after they are laid and tested complete all as specified and directed

M&L for lowering, laying , aligning, fixing in position and jointing at all levels /depths full round HDPE, DWC (Double wall corrugated) 150mm dia with required jointing accessories of SN 8 grade as per IS 16098 (Part2) amended up to date in trenches in complete including all material, labour , sectional hydro stating complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe 150mm internal dia of pipe and rendering cutting out existing benching and forming branch channel in PCC (1:2:4) type B-1 using 20 mm graded stone aggregate for smooth finish complete all as specified and directed.

Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittings etc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed. Note- (i) Dismantled serviceable light fitting shoud be kept in safe custody for reuse. (ii) Refixing of serviceable fitting shall be paid seperately under relevant items of Sch 'A' given here in after.

Refixing of serviceable light fittings upto 22 watt obtained form item no 99 including connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rose complete all as specified and directed.

Taking down fans/meter/Geyser/Exhaust fan from existing position and removing the same and deposited to MES store and will installed after completion of work.complete all as specified and directed.

Taking down old and unserviceable sub main wiring of any size/type /core including earth wire with batten conduit etc complete all as specified and directed

Taking down old and unserviceable sheet metal enclousure ,switch fuse unit,distribution board any type/way/capacity including fuses mcbs ,insulator rccbs etc copmlete after removing all connection and making good the disturbed surface complete all as specified and directed.

M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt grade drawn into and inculding non metallic rigid PVC concelled conduit medium grade 25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of module metal flush boxes and including modular front cover plate & back plate for mounting modular type switches /socket/fan/ regulator etc including provision of one single core PVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dolly switch board for complete all as specified and directed. One light/fan point controlled by one switch SP 5 Amps ,240 V Make- Polycab/Havells/RR kables/plaza Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

Ditto all as per item No 104 above but for One bell/buzzer point controlled by bell push

Ditto all as per item No 104 above but for One 3 pin 5 amps switch socket outlet point on independent board

Ditto all as per item No 104 above but forOne 3 pin 5 amps socket point on same board

All as per the item no 104 herein before but with 2.5 sqmm conductor for 5 pin 15 Amps switch socket outlet.

All as per item No 104 above but for one light point controlled by two 2 way switches.

S&F switch modular type 1 module single pole, one way 5 Amps. Complete all as specified and directed. Make - Goldmedal/cabtree(havells)/L&T / Legrand.

S&F switch modular type 1 module single pole, one way 15 Amps. Complete all as specified and directed. Make - Goldmedal/cabtree(havells)/L&T/ Legarnd.

S&F socket outlet 2 in 1, 5 pin, 15 Amps modular type 2 module. Complete all as specified and directed. Make - Goldmedal/cabtree(havells)/L&T/ Legarnd.

S&F socket outlet 5 Amps modular type 2 module. Complete all as specified and directed. Make - Goldmedal/cabtree(havells)/L&T/ Legarnd.

Ditto all as per item no 110 but for Bell push 5 Amps Complete all as specified and directed. Make - Goldmedal/cabtree(havells)/L&T / Legarnd.

Ditto all as per item no 110 here-in-before but for 5 Amps 2 way switch. Complete all as specified and directed. Make - Goldmedal/cabtree(havells)/L&T/ Legarnd.

M&L for ceiling rose,PVC/polycarbonate, isolated body. Complete all as specified and directed.

S&F stepped type electronic fan regulator modular type 1 module. Complete all as specified and directed. Make - Goldmedal/cabtree(havells)/L&T/ Legrand

S&F bell, ding dong type AC, 230 Volt, single pole. Make - Goldmedal/cabtree(havells)/L&T

S&F in repair for Submain wiring with two run of single core PVC insulated FRLS-H multistrand copper conductor cable of size 10 Sq mm drawn into and including non metallic heavy duty rigid PVC conduit not less than 25 mm size ISI marked ivory colour (Pressfit or similar brand ) including all conduit fittings / accessories and One run single core 10 Sq mm FRLS-H multistrand copper conductor cable as continuous earth wire complete all as specified and directed. (Note for submain wiring: Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the quoted unit rate). Make- Polycab/Havells/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

S&F in repair for submain wiring with two run of single core PVC FRLS-H insulated unsheathed multi stranded copper conductor cable of size 4 Sqmm 1100 volts grade and one run of PVC insulated unsheathed multi standed copper conductor cable of size 4 Sqmm 1100 volts grade as earth continuity conductor drawn into in and including rigid non metallic PVC concealed / surface conduit of suitable size on roof/wall/ceiling including making good the disturbed surfaces of wall etc complete all as specified and directed. Note : Two run of single core cable and one run of earth wire will be measured as one length and conduit and its accessories is deemed to be included in the quoted unit rate). Make- Polycab/Havells/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex

S&F Sheet metal enclosure 8 way double door distribution board when MCB to be used SPN 240 volt sheet complete all as specified and directed . Make :- Havells / Legrand / Seimens/ L&T.

S&F MCB SPN 32 to 40 Amps 240 volt,50 hz,10 KA breaking capacity :C" curved type complete all as specified and directed. Make :- Havells / Legrand / Seimens / L&T.

S&F MCB single pole, 6 to 32 Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as specified and directed. Make :- Havells / Legrand / Seimens / L&T.

S&F socket outlet 5 pin 20 amp modular type 2 module with suitable size of module metal flux boxes and including modular front cover plate and back plate for mounting modular type switch & socket with one single pole one module MCB of 20 amp including electrical connection complete all as specified and directed. Make : Havells / Legrand / Seimens / L&T.

S&F holder bakelite with 1x9 watt LED bulb includig all fixing accessories and making connection with copper conductor complete all as specified and directed.

S&F wall/surface mounting luminaires integrated LED Batten 18/20 W, 6500/4000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protection complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements complete all as specified and directed. .Make : Havells / Bajaj / Phillips/ L&T.

S&F for Sleek LED mirror light 10 watt rating with diffuser 2ft long twisted flexible copper wire (approx 0.5 mtr long) complete all as specified and directed. Make : Phillips/ Havells/ Bajaj/ L&T.

S&F LED security light 45 watt complete with security light bracket (complete with two set of clamp ,nut and bolt) made out of 40 mm medium grade GI pipe bend to shape and with fixing arrangements duly welded (length of pipe should not be less than 1.2 mtrs) and making conection with using 1.5 sqmm PVC insulated multistranded copper conductor two single core cable complete all as specified and directed. Make : Havells / Bajaj / Phillips/ L&T.

Supply and fixing ceiling fan complete with blade down rod and accessories 230 V,1400 mm sweep air delivery 245 cfm complete with brusheless direct current motors all as specified and directed . Make :- Havells/Philips/crompton/Bajaj/ Usha.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter volt 230 V 50 Hz RPM 1200 copper winding of sweep 250 mm. complete all as specified and directed. Make :- Havells/Philips/crompton/Bajaj/ Usha.

M&L for earthing complete with galvanised steel earth plate electrode of size 600mm x 600mmx 6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 5 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) PCC pit in mix (1:3:6) type C1 using 20mm graded stone aggregate with RCC 1:2:4 type B-1 using 20mm graded stone aggregate 40 mm thick cover reinforced with 6 mm dia M.S bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, including all necessary excavation and earth work, complete all as specified and directed.

S & F in repairs integrated LED type Post top lantern with high power 30 W LED as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire including LED driver and all neceesary electrical connection complete all as specified and directed. Make :- Phillips/ Bajaj/ Havells/ L&T/ Crompton.

H C CONSTRUCTION (BID ID -3455250)

NEXT POWER ENTERPRISES (BID ID -3455260)

Yaduvanshi Traders (BID ID -3455257)

M/S GUPTA TRADERS (BID ID -3455314)