CERTAIN MISCELLANEOUS BR EM REPAIRS INCLUDING INTERNAL EXTERNAL PERIODICALS TO MARRIED ACCOMMODATION AT RATNUCHAK MIL STN UNDER GE KALUCHAK

Amount

Preparation of old decorated plastered surface of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of white wash, complete all as specified & directed.

Preparation of old decorated plastered surface of ceiling by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of white wash, complete all as specified & directed.

Preparation of old decorated plastered surface of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of oil emulsion distemper, complete all as specified & directed.

Complete removal of existing treatment from old decorated plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of primer over 3mm thick wall care putty, complete all as specified & directed.

Preparation of old decorated plastered surface of walls by brooming down or by steel wire brushes, scraping down smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of cement base paint, complete all as specified & directed.

Preparation of old decorated wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.

Preparation of old decorated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed.

Complete removal of existing treatment from old decorated plastered surfaces of projections portion of columns, beams, facia, chajjas, walls, in small patches etc and applying two coats of weather proof paint (Apex) over a coat of primer, complete all as specified & directed.

Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed & directed.

15mm thick rendering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces using integral water proofing compound, surface finished even and smooth without using extra cement, complete all as specified & directed. Note : Integral water proofing compound shall be measured & paid for seperately under respective item.

15mm thick rendering in cement mortar 1:6 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified & directed.

5mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling and similar items, surface finished even and smooth without using extra cement, complete all as specified & directed.

Preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of chalk whitening, complete all as specified.

Preparation of new plastered surfaces of walls and applying two coats of cement base paint of any tint, complete all as specified & directed.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified & directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified & directed.

Demolition of cement concrete (un-reinforced) of any description in any position not otherwise specifically provided for, complete all as specified & directed.

25mm thick PCC 1:2:4 nominal mix, type B-0, using 12.5mm graded stone aggregate as floor, finished even and fair to receive floor finishes, complete all as specified & directed.

Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified and directed .

All as per Srl Item 19 above but on vertical surfaces such as skirting/dado etc. set & jointed in neat cement slury & pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4.

Vitrified light shade ceremic tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in cement mortar 1:4, complete all as specified & directed.

Vitrified light shade ceremic tiles 10mm thick (Square/rectangular) polished area of each tile not exceeding 0.36Sqm, as in vertical surfaces such as skirting/dado etc., set and and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

Non skid ceramic jointless coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but nexc 0.11 sqm in floor etc set & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified and directed .

Glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and jointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, complete all as specified & directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed.

Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed.

Taking down shutters of any description not exc. 1 Sqm each, complete all as specified & directed.

Pressed steel frames of size 125mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.

Pressed steel frames of size 105mmx60mm made of 1.25mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate., complete all as specified & directed. Note : PCC for filling of hollow portion shall be measured and paid for separately.

PCC 1:3:6 nominal mix, type C-0 using 12.5mm graded crushed stone aggregate as in filling of pressed steel door frames/chowkats, complete all as specified & directed.

35mm thick factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled shutters (two panels) with lock rail and panels of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified & directed.

35mm thick 2nd class hard wood (Sal/Hollock), glazed and skeleton shutters (factory made), open rebated and prepared to receive glass or gauge etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., size of members of shutters as specified in clause 8.24 (a) of SSR Part-I, complete all as specified & directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified & directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet 5mm thick to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplied & fitted in the frame at site as per specification & drawings shown in SSR Part-II, complete as specified & directed.

18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber framed work as in cup board shutters, shelves etc. with 3mm thick teak wood beading/lipping, complete all as specified & directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40mm, complete all as specified & directed.

40mm dia, copboard knobs fixed with nut, screw and washer of mild steel, brass polished, complete all as specified & directed.

150mm size Hasp and staple, safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified & directed.

Aluminium handle, cast type, anodised, 150mm long, complete all as specified & directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed, 300mm long, complete all as specified & directed.

Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 200mm long, complete all as specified & directed.

300mm ordinary rat tail rod pattern door spring including roller and roller plate of mild steel and fixed to pressed steel frame / MS frame/ wooden chowkhats including necessary welding work etc where-ever required, complete all as specified & directed.

Butt hinges, medium weight, cold rolled, mild steel 100mm long, complete all as specified & directed.

Mild steel galvanised wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads, n exc 1.5 sqm, complete all as specified & directed.

3mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads or glazing pins in metal frame in squares not exc. 0.5 Sqm in each pane, fixed in repairs, complete all as specified & directed.

3mm thick figured glass, pin headed type and glazing with oil putty or wooden beads or glazing pins in squares not exc. 0.5 Sqm in each pane, complete all as specified & directed.

Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified & directed.

Taking up or down steel tubing and connections 15mm bore, complete all as specifed & directed.

Taking up or down steel tubing and connections 20mm bore, complete all as specifed & directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc. 10cm girth in brick/stone walls, complete all as specified & directed.

Galvanized iron water tubing, medium grade, 15mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Galvanized iron water tubing, medium grade, 20mm bore with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Bib tap, 15mm bore, fancy type, chromium plated, long body with cup, cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified & directed.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repairs, complete all as specified & directed.

Angle valves, 15mm bore, fancy type, chromium plated capstan head, cast copper alloy, screwed down, high pressure, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.

Stop valves, 20mm bore, fancy type, chromium plated with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., fixed in repairs, complete all as specifed & directed.

Brass chromium plated shower rose of 125mm size, fancy type with or without swivel joints, fixed in repairs, complete all as specified & directed.

Brass chromium plated mixer for mixing hot & cold water, single hole, screwed down for iron pipe, bore of pipe 15mm, fixed in repairs, complete all as specified & directed.

Wall mixer with telephonic shower for mixing hot & cold water, 15mm bore, fancy type, brass chromium plated, , screwed for iron pipe, fixed in repairs, complete all as specified & directed.

Toilet paper holder with flap, brass chromium plated, fixed to walls with CP brass screws, fixed in repairs, complete all as specified & directed .

Jet spray CP with 1 mtr long tube for 15mm bore pipe and mild steel chromium plated hinging device for pedestal type WC, fixed in repairs, complete all as specified & directed.

Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in chrome finish & wall hook, fixed in repairs, complete all as specified & directed. Make. Jaquar, Cat Part No. ALD-CHR-565 or equivalent model of make specified in List of Makes/ Manufacturers/ Producers here-in-after.

PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified & directed.

PVC bath cabinet made of ABS material of size 450x600mm with glass front, complete all as specified & directed.

Vitreous China, wash hand basin, flat back, white of size 580mmx450mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC 32mm dia waste pipe, chain and plug, porcelain stopper, complete, complete all as specified & directed.

Vitreous china wash down water closet (Pedestal pattern), white with ‘P’ or ‘S’ trap, fixed with screws of suitable size including making connections to trap and to flush pipe, fixing flushing cistern etc. and making good to floors, fixed in repairs, complete all as specified & directed.

PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, fixed in repairs, complete all as specified & directed.

PVC (SWR) pipes, 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls with clamps, complete all as specified & directed.

PVC (SWR) pipes, 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls with clamps, complete all as specified & directed.

110mm bore PVC (SWR) bends any radius, complete all as specified & directed.

75mm bore PVC (SWR) bends any radius, complete all as specified & directed.

PVC (SWR) vent cowl of size 75mm bore, complete all as specified & directed.

PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, dia of outlet 75mm, fixed in repairs, complete all as specified & directed.

PVC (SWR) branch piece, single (single Y) equal or unequal with oval access door, 110mm bore, fixed in repairs, complete all as specified & directed.

PVC (SWR) branch piece, single (single Y) equal or unequal with oval access door, 75mm bore, fixed in repairs, complete all as specified & directed.

PVC (SWR) junction single (Single T) equal or unequal, 110mm bore with oval access door, fixed in repairs, complete all as specified & directed.

PVC (SWR) junction single (Single T) equal or unequal, 75mm bore with oval access door, fixed in repairs, complete all as specified & directed.

20mm dia powder coated curtain rods in one length per door/window, fancy type, designed & colour as approved by GE, provided with dome type corner ends on each end, fixed in repairs, complete all as specified & directed.

Mild steel powder coated bracket of size 150mm, made to shape and size to hold curtain rod 20mm dia, of shade and pattern as per sample approved, fixed to walls with PVC gutties and mild steel screws, complete all as specified & directed.

Supply only integral water proofing compound, complete all as specifed & directed.

PCC 1:5:10, nominal mix, type E-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete, complete all as specified & directed.

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified & directed by Eng-in-charge.

Complete removal of the existing sunken treatment including roughening and preparation old surfaces of concrete floor by picking, scurubbing down with steel brushes, sweeping clean and washing down with water to remove dust etc and applying the following treatment :- (a) 15 thick rendering on fair faces of brick work or cement surfaces in cement mortar 1:4 with using integral water proofing compound as per manufacturer instructions by weight of cement to sunken portion including wall of sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement, finishing concrete including walls of sunken portion with proper slope. (b) Applying 2nd course of bitumenous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the screed bed.

(c) Applying 3rd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. (d) Applying 4th course of APP (Atactic Polypropylene) modified polymeric membrane 3mm thick weight not less than 3.6 Kilogram/Square Metre with 160 Grams/Square Metre non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. (e) Applying 5th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kilogram/Square Metre.

Factory made box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS sheet tube with double side shutters (Wire Gauged shutter and Glazed Shutter), side hung shutters with MS handles and MS stays dovetailed or welded including 02 nos MS Tower Bolt 150mm long for each leaf, 8 mm square guard bars at spacing as shown in drawings, MS flat iron frame work, MS hinges, tarred hold fast, PCC 1:2:4 type B1 as in bed of hold fast, 01 No. per leaf of stopper of 100mm size etc and taking down old unserviceable window, complete all as specified and shown as drawing No. CEPZ/TD-354/09 sheet 1/3 to 3/3. Note : a). Wire cloth and Sheet glass shall be measured and paid seprately under respective items. b). Rate of both type of shutters is inclusive in the quoted rate.

Steel ventilator with top hung shutter including hinges, steel peg stay, complete including one shop coat of red oxide zinc crome primer, complete all as specified & directed.

Preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified & directed.

Taking down carefully, copper / aluminium conductor unserviceable / perished point wiring (any type) for light/ fan/ light socket or power socket etc complete with fittings such as switches, sockets, ceiling roses, pendant holders, bracket holder, light fittings, regulators etc, including making good to disturbed surfaces of wall/floor etc, complete, all as specified & directed.

Taking down carefully unserviceable main switches, distribution boards of any type/size from their position including making good to disturbed surfaces of wall etc, complete all as specified & directed.

Taking down carefully existing sub main wiring with aluminium conductor/copper conductor cable of any size with GI earth wire including wooden batten etc and making good disturbed surface of walls etc, complete all as specified & directed.

Point wiring with multi stranded FRLS PVC insulated unsheathed copper conductor cable single core of 1.5 Sqmm drawn into and including PVC concealed conduit 'ISI marked' of 20mm dia medium grade as required, fixed in concealed surface of wall/ceiling including cutting chases as required, terminated in pressed steel sunken box having wall thickness as directed suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakelite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm for earth continuity conductor (green colour) and connected to earth dolly for one light/fan/bell point controlled by one way switch using proper colour coding, complete all as specified & directed.

All as per Srl item No. 93 here-in-before but for one 3/5 pin 5 Amps socket outlet on independent board.

All as per Srl item No. 93 here-in-before but for one 3/5 pin 5 Amps socket outlet on same board .

Point wiring with multi stranded FRLS PVC insulated unsheathed copper conductor cable single core of 4.0 Sqmm drawn into and including PVC concealed conduit 'ISI marked' of 20mm dia medium grade as required, fixed in concealed surface of wall/ceiling including cutting chases as required, terminated in pressed steel sunken box having wall thickness as directed suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakelite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm for earth continuity conductor (green colour) and connected to earth dolly for one 3/5 pin socket outlet 15 Amps independent using proper colour coding, complete all as specified & directed.

Point wiring with multi stranded FRLS PVC insulated unsheathed copper conductor cable single core of 1.5 Sqmm drawn into and including PVC casing caping medium grade of suitable size as required, fixed on surfaces of wall/ceiling including terminated in pressed steel sunken box having wall thickness as directed suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakelite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm for earth continuity conductor (green colour) and connected to earth dolly for one light/fan/bell point controlled by one way switch using proper colour coding, complete all as specified & directed.

All as per Srl item No. 97 here-in-before but for one 3/5 pin 5 Amps socket outlet on same board .

All as per Srl item No. 97 here-in-before but for one 3/5 pin 5 Amps socket outlet on independent board.

Point wiring with multi stranded FRLS PVC insulated unsheathed copper conductor cable single core of 4.0 Sqmm drawn into and including PVC casing caping (double lock) medium grade of suitable size as required, fixed on surfaces of wall/ceiling including terminated in pressed steel sunken box having wall thickness as directed suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakelite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm for earth continuity conductor (green colour) and connected to earth dolly for one 3/5 pin socket outlet 15 Amps independent using proper colour coding, complete all as specified & directed.

Switch piano flush type 5 Amps 240 Volt, single pole one way, complete all as specified & directed.

Bell push flush type, one way 5 Amps single pole one way, complete all as specified & directed.

Switch socket combination, two in one, 5 pin type, 5 Amp, flush type universal, 240 volt, complete all as specified & directed.

Switch socket combination, two in one, 6 pin type, 5 & 15 Amp, 240 Volt, flush type universal, complete all as specified & directed.

Ceiling rose surface type, bakelite 65mmx50mm, 3 terminals, 240 Volt, complete all as specified & directed.

Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified & directed.

Musical type electric door bell, AC, 240 volts, single pole, fancy type, coloured, complete all as specified.

Inverter LED lamp 6500K, 900lm in white colour of 9 watt, base cap B-22 with poly carbonate diffuser and aluminium heat sink, complete all as specified & directed.

Electronic fan regulator, deluxe socket type (5 steped type), 240 Volt for 1200/1400 sweep AC ceiling fan including taking down old unserviceable fan regulator, complete all as specified and directed.

Surface & wall mounted, LED tube light fitting, 20W, 240 volts, decorative ultra slim aluminium square profile LED lighting fixture with high lumen output, environmental friendly, energy efficient with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size & taking down old unserviceable tube light fittings, complete all as specified & directed. Make. Havells-Cat Part No. LUMILINEPLUSBS20WLED865 SPCSS/ Halonix-Cat Part No. HLB-03-20-CW-AL/ C&S Electric-Cat Part No. LTTB4F20WLED/W/ Philips-Cat Part No.BN021CLED20SPSUCWGRS2/ Crompton-Cat Part No.CCS-100-20-65-HL2-DP-NWH.

Sub main wiring using uniform coding of wiring with two runs of 6.0 Sqmm single core FRLS PVC insulated unsheathed cable upto and including 1100 volts grade with multistranded copper conductor drawn into and including PVC concealed conduit 'ISI marked' of 25mm dia medium grade as required, fixed in concealed surface of wall/ceiling including cutting chases as required with all fittings and fixing accessories & one run of 4.00 Sqmm FRLS PVC insulated copper conductor for earth continuity wire in green colour, complete all as specified & directed. Note:- Two runs of copper conductor 6.0 sqmm and one run of 4.00 Sqmm copper earth wire including PVC conduit will be measured and paid as one unit only.

Sub main wiring using uniform coding of wiring with two runs of 6.0 Sqmm single core FRLS PVC insulated unsheathed cable upto and including 1100 volts grade with multistranded copper conductor drawn into and including PVC casing caping medium grade (double lock) of 25mm size as required, fixed on surfaces of wall/ceiling with all fittings and fixing accessories & one run of 4.00 Sqmm FRLS PVC insulated copper conductor for earth continuity wire in green colour, complete all as specified & directed. Note:- Two runs of copper conductor 6.0 sqmm and one run of 4.00 Sqmm copper earth wire including PVC conduit will be measured and paid as one unit only.

Sheet metal enclosure, factory made for DBs, protection class IP-43, phosphatised powder coated, double door when MCB's to be used, single pole & neutral, 240 volts with copper bus bar & neutral link earthing stud, 4 ways including taking down old unserviceable enclosure, complete all as specified & directed.

Sheet metal enclosure, factory made for DBs, protection class IP-43, phosphatised powder coated, double door when MCB's to be used, single pole & neutral, 240 volts with copper bus bar & neutral link earthing stud, 8 ways including taking down old unserviceable enclosure, complete all as specified & directed.

Sheet metal enclosure, factory made for DBs, protection class IP-43, phosphatised powder coated, double door when MCB's to be used, single pole & neutral, 240 volts with copper bus bar & neutral link earthing stud, 12 ways including taking down old unserviceable enclosure, complete all as specified & directed.

MCB, single pole, 6 to 32 Amp, 50 Hz AC supply, 10 KA repturing capacity, 240 Volt, 'C' series, complete all as specified & directed.

MCB, single pole & neutral, 6 to 32 Amp, 50 Hz AC supply, 10 KA repturing capacity, 240 Volt, 'C' series, complete all as specified & directed.

MCB, double pole, 6 to 32 Amp, 50 Hz AC supply, 10 KA repturing capacity, 240 Volt, 'C' series, complete all as specified & directed.

MCB, double pole, 63 Amp, 50 Hz AC supply, 10 KA repturing capacity, 240 Volt, 'C' series, complete all as specified & directed.

MCB, single pole & neutral, 63 Amp, 50 Hz AC supply, 10 KA repturing capacity, 240 Volt, 'C' series, complete all as specified & directed.

MCB, triple pole, 63 Amp, 50 Hz AC supply, 10 KA repturing capacity, 415 Volt, 'C' series, complete all as specified & directed.

MCB, four pole, 63 Amp, 50 Hz AC supply, 10 KA repturing capacity, 415 Volt, 'C' series, complete all as specified & directed.

Vertical type load line sheet metal enclosure for DBs, double door, 4 way, IP-43, triple pole & neutral, provision of MCCB as incomer, , 415 volt, 50 Hz alongwith 200 Amp rated copper bus bar including taking down old unserviceable DBs, complete all as specified & directed. Make. C&S Electric Cat Part No.CSDBMCCB100DD04IP43S or equivalent model of make specified in List of Makes/ Manufacturers/ Producers here-in-after. Note : MCCB shall be measured & paid for seperately under respective item.

MCCB of capacity 125 Amps, 4 pole, 415volt, 50Hz, rupturing capacity 25 KA (minimum) or higher with thermal magnetic release, AC, 50 C/S, complete all as specified & directed. Make. C&S Electric Cat Part No.CSC1S4125 or equivalent model of make specified in List of Makes/ Manufacturers/ Producers here-in-after.

Intergral LED security light luminaries 60W LED, 230 volts, aesthetically designed luminiare with excellent thermal management, mounted on GI bracket including making connection with PVC copper conductor cable of appropriate size, complete all as specified & directed. Make. Crompton Greaves : Cat Part No. LSTP-60-CDL-M or equivalent model of make specified in List of Makes/ Manufacturers/ Producers here-in-after.

Street light bracket made out of 40mm bore medium grade pipe of 1.20m length, bent to required shape, fixed on PCC/Steel pole with 02 Nos. clamps of flat iron (40 x 6mm), nuts, bolts and washers including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

Supply, hanging and testing of BEE 1 star rated super energy efficient ceiling fan with double ball bearing, 1200mm (48 inch) sweep having 3 blades, down rod, canopies, shackles, 230volt, single phase suitable for input voltage range 140-285 volt AC, 50Hz with power factor not less than 0.99, service value minimum 8 cu metre/min/watt or higher, air delivery minimum 230 cu metre/min or more power consumption maximum 28 watt or lower, top speed minimum 340 RPM or higher, THD not more than 10%,speed control by 5 step electronic regulator with three years on site warranty, copper winding complete as per IS:374-1979 or latest IE rule & site requirement, colour white, complete all as specified & directed.

Energy effecient heavy duty Exhaust fan with louvers of size 300mm sweep, 1400 RPM, 230 volts, 50 Hz, single phase, silent type,totally enclosed complete with nuts, bolts & washers including provision of three core flexiable copper cord of size 0.75 sqmm 3 core of required length from ceiling rose or connector to exhaust fan for connection, cutting holes in brick walls or required size for fixing exhaust fan and making good the disturbed surfaces, complete all as specified & directed. Make. Havells, Cat Part No.Turbo Force SP or equivalent model of make specified in List of Makes/ Manufacturers/ Producers here-in-after.

Supply, installation and testing of water heater storage type (Geyser) single phase, 230V, 50Hz, 5 star energy saving, high density PUF insulation tank made of heavy duty magnesium anode rod with steel core to protect enamelled tank from rust & corrosion, vertical installation type, 25 Litre capacity, 2000 Watt rated power, incoloy 800 glass coated heating element, tank coating of ferro glass dry powder tank made of ultra thick super cold rolled steel plates, rated pressure 0.8MPa, IPX4 protection consist of safety valves, thermal cut off, thermostat including connecting up fixed to walls by drilling of holes, grouting of bolts of suitable size with nuts etc and making good disturbed surface complete all as specified & directed. Make. HAVELLS Model No: Monza DX, Cat Part No. GHWAMGTWH025 or equivalent model of make specified in List of Makes/ Manufacturers/ Producers here-in-after.

Sheet metal enclosures single pole and earth enclosure with a two pin and earth plug with socket complete with one double pole MCB 20 Amps, C series, 240 volts including old unserviceable enclosure, complete all as specified & directed.

Plug top, 3 pin, 15 Amps, 240 volts, 50 Hz AC supply, complete all as specified & directed.

Taking down ceiling fan from any position, dismantling the blades, cutting damaged winding and taking the fans to contractor workshop for rewinding of ceiling fan motor, single phase, 220/230 volts, 50 Hz 1200/1400 mm sweep of any type of suitable size using super enameled copper winding wire with allied winding material, varnishing with air dry insulation carrying complete servicing of fan by cleaning, greasing the bearing, oiling of moving parts, washer packing including replacement of split pin, twin flexible copper wire of size 0.5 Sqmm, length upto 1 Mtr length, reassembling and testing on load and refixing in existing position, complete all as specified & directed.

Notes : (a) Unserviceable parts/ components require for replacement shall be paid under respective items as “Suppy only” under Srl item No.134 to 138. (b) The rates for above items are deemed to include for transportation to & from workshop of Fan/Eaxhaust fan as approved by Engineer-in-charge for necessary repairs and testing of fan at workshop.

Preparation of old surfaces of ceiling fans and blades by removing dust, oil mark etc filling the cavities with filler material and painting in-situ with one coat of 1st quality synthetic enamelled paint with the help of spray machine including greasing, re-writing MES SL No with black paint in capital letters in block of height n exc 2cm for 1200mm/1400mm sweep ceiling fan, complete all as specified & directed.

Supply only gun metal bush of suitable size for 1200/1400mm sweep ceiling fan, complete all as specified & directed.

Supply only ball bearing of suitable size for 1200/1400mm sweep ceiling fan, complete all as specified & directed. Make : SKF Bearing No.6201 or 6202/ NBC/ TATA

Supply only condenser 2.5 MFD, complete all as specified & directed. Make : Bajaj/ Crompton/ GEC/ Khaitan/ Orient

Supply only mounting clamp assembly complete for 1200/1400mm sweep ceiling fan with clamp, bolt, nut, washers, safety/split pins and rubber seal, complete all as specified & directed.

Supply only PVC insulated multistranded copper flexiable wire of size 0.75sqmm, 3 core, complete all as specified & directed.

Comprehensive repair/ maintenance of storage type electric water heater (Geyser) of 50 litres capacity, comprising of the following :- (a) Inspection, taking down, opening or dismantling, de-scaling brushing and thoroughly cleaning the storage tank up to the satisfaction of the Engr-in-Charge. (b) Checking of all stop cock, pressure release valves, fusible plugs for its serviceability etc in situ to ensure free movement of the parts including supply and replacing the washers / gasket nut etc. (c) Checking and rectify earth continuity of the electrical circuits of the geysers and power point. (d) Checing and refixing thermostat and readjust. (e) De-scaling the immersion type heating element and siphon assembly with diluted Hydro chloric acid or clear pedette solution. (f) Checking of indicator lamp for it serviceability.

(g) Re-assembling & reinstallation of geyser including testing after repair, complete all as specified & directed. Notes : (i) The replacement of defective / nonfunctional parts shall be measured & paid for separately as “Supply only” under Srl item No.141 to 151 of Sch ‘A’ (BOQ) and fixing charges for new/ repaired items are deemed to be included under this item. (ii) Minor parts such as nuts and bolts reqd for fixing inner tank is deemed to be included under this item.

All as per Srl item No.139 above but geysers of capacity 25 litres.

Supply only thermostat of rod/stem type EST-11EM, 20 Amps, resistive, 240 volt for geysers, complete all as specified & directed.

Supply only Copper siphon assemply suitable for geysers of 50 litres capacity of approved make with inlet, outlet, thermostate pipe, drain pipe with drain plug, screws, studs, clamps for fixing heating elements including gasket, complete all as specified & directed.

All as per Srl item No.142 above but siphon assembly suitable for geysers of capacity 25 litres.

Supply only heating element 1.5 KW, 240 volt, press/ screw/ triangular/ circular type for Geysers, complete all as specified & directed.

Supply only heating element 2.0 KW, 240 volt, press/ screw/ triangular/ circular type for Geysers, complete all as specified & directed.

Supply only neon type indicating lamp for geysers of 25/35/50 litre capacity, 240 volt, AC, complete all as specified & directed.

Supply only PVC insulated copper conductor flexiable cable of 2.50 sqmm, 3 core, 1100 volts grade, complete all as specified & directed.

Supply only safety valve for geysers of 25/50 litres capacity, 240 volt, AC, complete all as specified & directed.

Supply only chromium plated connecting pipe for hot water of length 60cm length suitable for 15mm dia GI pipe including two brass connecting nuts with gasket and connecting up, complete all as specified & directed.

Supply only non return valve 15mm including testing, complete all as specified & directed.

Supply only PVC connection ½” heavy duty 450mm long for hot/cold water with brass adopter, complete all as specified & directed.

NARESH KUMAR AND COMPANY