CERTAIN REPAIR/MAINT OF MD AND OTM ACCN AND REPAIR/ MAINT OF UG CABLE, LT OH LINES AND CONNECTED WORKS IN MAP ACCN OF ZONE B AND C AND MODERNISED COD INFRA UNDER AGE E/M OF GE (EAST) JABALPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc removing materials for taking credit and making good disturbed surfaces of walls, floors, etc.

Taking down unservicable/partly unservicable light fittings any type, tube light fitting and fixtures, etc and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes.

Taking down serviceable/unserviceable electric meter including meter box from existing position carefully for refixing adjacent to main switch board including making good to disturbed surfaces to match with existing surfaces.

Fixing only serviceable electric meter on & including wooden board to the wall and including making good disturbed surfaces to match with the existing surfaces.

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade onduit not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and hylam switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. Make of cable - FINOLEX / PLAZA / HAVELLS / POLYCAB & Make of PVC conduit & conduit accessories - PLAZA /PRESSFIT/KALINGA. Note : (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Rate is inclusive of Cutting/chases of wall/floor/ceiling.

One light point controlled by one, one way switch.

One ceiling /exhaust fan point controlled by one switch and regulator.

One 3 pin 5 amp socket out point on the same board with other switches.

One 3 pin 5 amps socket out let point on independent board.

One bell/buzzer point controlled by one bell push.

One light point controlled by two 2 -way switches

All as per Srl item No 5 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.

S &F Switch piano flush type single pole one way 5 amps.

S &F Switch piano flush button type Two way 5 amps.

S &F Socket out let 2 in one, 5/3 pin 5 Amp.

S &F Switch socket combination 5 Amps 5 pin flush type.

S &F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal.

S &F Ceiling rose, surface bakelite 65x50 mm three terminal.

S &F Call bell AC-230 Volt single pole ding dong.

S &F Bell push, flush type 5 Amps.

S &F Electronic regulator 100/120 Watt step type.

S &F Lamp holder insulated body with back plate for angle holder all as per specified.

Note for Srl Item No 07 to 16 :- Make - Havells/Anchor/Polycab

S & F in repair LED tube light fittings decorative ultra slim linear fixture with extruded with heat sink envioromentel friendly Energy efficient ready to use pack, 1 x 20/36 Watt, 4 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc with all assoceries intenallt prewired & includingconeecting up with 2 core flexible copper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75 x 75mm - 2 nos etc. Make- Havells 20 Watt LED cool day light spectra batten (White LHEXARP7IN1W020-PK1), Or Bajaj 36 w Lvora LED Batten 830337, or Philips -61018 20 W 4ft cool day light Astra line LED tube light.

S &F in repair LED tube light fittings decorative ultra slim linear fixture with extruded with heat sink envioromentel friendly Energy efficient ready to use pack, 1 x 10 Watt, 2 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc.with all assoceries intenallt prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75 x 75mm - 2 nos etc. Make- Philips ultron 17 Watt wall light (cool white round) or Jaquar LED Luke wall light 5 Watt, or Havells LED Streek track light 7 Watt white.

Supply and fix in repair LED security light fitting of 40/45 watt, aluminium pressure dia cast IP 66 with high power LED & LED driver of make Bajaj/Havells/Philips

S&F in repair Surface mounting round, decorative LED down lighter 15 WATT and transulent defuser, prefixed with flat profile and mounting clamps etc., complete all as per BAJAJ/ Havells/Philips

S & F in repair LED light fittings decorative 36/34 Watt recess mounting 2' x 2' type extruded metal/aluminium body, and electronic LED driver, connector block ect. with all accessories internal prewired & including connecting up with 2 core flexible cppper conductor cable with suitable size and mounting clamps etc. Make- Havells plano 2 x 2 grid panel 42 watt or Jaquar 24 w ultima ultra 2 x 2 high lumen panel or Philips lighting RC370B24-Watt LED Recessed full glow 2 x 2 panel (cool day light, white).

S & F in repair globe light 24 Watt mounted on wall energy efficient, water resistant E27 base of size 25.5 x 20.5 x 25.5 CM with 18-24 watt LED bulb with white colour all as specified and directed by Engr-in -Charge. Make - Philips cat/product No 71797/46/31 24-watt mygarden wall light (white and Synthetics) or havells cat/ code No LHFOAJE1TZ1/060 (Havells floretine 1 LS wall light SS or equivalent of Jaquar. Note :- LED bulb rate will included in coated rate and in case of unavaibility of equivalent make, spesified product of mentioned Cat/Order shall approve for installation.

Taking down and dismantling of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spare parts will be measured & paid separately) including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and supply and fixing the following items and including necessary transportion to workshop, for 1200/1400/1500mm sweep of fan :-

(I) Split pin - 02 Nos

(ii) Connection block - 1 No

(iii) Insulation rubber bush. - 01 No

Fixing or hanging only ceiling fan after winding fan under item No. 01 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan (max up to 1m length) all as specified and directed.

All as per Srl Item No 23 here-in-above but exhaust fan of size 225mm to 450mm sweep (except rubber roll, split pin).

Fixing only Exhauest fan after winding fan under item No. 23 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed.

All as per item Srl No. 23 here-in-above but air circulater fan of size 600 mm to 750mm sweep (except rubber roll, split pin).

Fixing only air circulater fan after winding fan under item No. 27 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed.

All as per Srl item No. 23 here-in-above but wall fan of size 300 to 400 mm sweep (except rubber roll, split pin).

Fixing only wall fan after winding fan under item No. 29 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan( max up to 1m length) all as specified and directed.

Overhauling of ceiling fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on completion all as specified and as directed including taking down. Note. (i) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (ii) The spares required shall be measured and paid separately in the relevant items.

Taking down exhaust fan, of any size and type & cleaning/servicing and overhauling the same, refixing the same on its existing position and connection up.

Supply, fixing and connecting up flexible copper wire twin core of 23/.0078.

Supply only gun metal bush of any size (Make - MSP).

Supply only bearing for ceiling fan (Make - TATA/SKF No.6201/6202).

Supply only bearing for ceiling fan (Make - TATA/SKF No.6203/6204).

Supply only fan condensor 2.5 MFD (Make – USHA / UNIVERSAL).

Supply only fan condensor 4 MFD (Make – USHA / UNIVERSAL).

Supply only split pin.

S&F canopy of ceiling fan bottom and upper side of size 1200/1400/1500mm Make :- Usha / Orient / Keasal / Himadri / Thermacool / Jetairway

Painting of ceiling fan 1200/1400 mm sweep complete including fan blade down rod with synthetic enamelled paint of white tint including cleaning and removing dust and dirt and making smooth surface for painting including writing MES No complete all as specified.

Supply & fix fan blade made out of aluminium alloy suitable for wall mounting fan of size 300 to 450 mm.

Supply & fix GI tubing light grade 40 mm dia use as down rod of ceiling fan, cut to required length & including drilling of hole at both side.

Supply & fix GI tubing light grade 20 mm dia use as down rod of ceiling fan ,cut to required length & including drilling of hole at both side.

Supply & fix GI tubing light grade 15 mm dia use as down rod of ceiling fan ,cut to required length & including drilling of hole at both side.

S & F in repairs Mild steel work in framed work such as Fan hooks, Clamps, gratings, ladders etc., with ends of bars welded and/ or riveted, or forged and similar work confirming to Fe 410 - O or Fe 310 - O and incl painting to surfaces using two coats of metallic primer and a coat of synthetic enamelled paint of desired colour as directed.

Fabricate,supply & fix GI pipe bracket 25mm dia- 0.9m long & 2 set of clamps made out of 30 x 5mm ms flat & fixed with anchor bolt suitable for 25w security light fitting.

S &F earth enclosure with 2 pin earth plug sokcet complete with MCB SP 20/25 amp, flush mounting type. Make- LEGRAND/ABB/L&T.

Taking down ceiling fan /EXHAUST FAN of any size or make.

Hanging only ceiling fan 1200mm/1400mm/1500mm during wiring Sweep by providing fan hooks in proper manner and making connection with T 3 core copper cable including painting all as per specified and directed by Engr-in-Charge.

FIXING ONLY Exhaust fan 230/250/300/380/450 sweep heavy duty including 3 core copper cable & cutting holes if required etc.

SUPPLY & FIX capacitor 2.5/4 mfd suitable for ceiling fan/exhaust fan.

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces.

MCB DB made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade, 415Volts TPN with 4 way Double door. Make-L&T / LEGRAND / SCHNEIDER.

MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail, 230 Volts SPN with 4 way Double door IP-43-IK09 protection grade. Make- L&T / LEGRAND / SCHNEIDER

MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail ,230 Volts SPN with 8 way Double door , IP-43-IK09 protection grade. Make - L&T / LEGRAND / SCHNEIDER

MCB DB made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 12 way Double door IP-43-IK09 protection grade. Make- L&T / LEGRAND / SCHNEIDER

Note for Srl Item No 54 to 57. (i) The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall/ DB tobe fixed on wall including frame made out of MS flat 40 x 5mm. (ii) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface. (iii) Make of DB & MCB -L&T / LEGRAND / SCHNEIDER

S&F in repair of Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sq mm, earth continuity conductor of size 2.5 Sq mm to be drawn through and including PVC conduit 25 mm dia medium grade conceled in walls/roof/floors all as directed by Engineer-in-Charge. Notes:- (i) Two wires of 4 Sq mm and one wire of 2.5 Sq mm and one run of PVC conduit shall be measured as one unit.

S&F in repair of Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 6 Sq mm, earth continuity conductor of size 4 Sq mm to be drawn through and including PVC conduit 25 mm dia medium grade conceled in walls/roof/floors all as directed by Engineer-in-Charge. Notes:- (i) Two wires of 6 Sq mm and one wire of 4 Sq mm and one run of PVC conduit shall be measured as one unit.

MCB TPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps.

MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63 Amps.

MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32 Amps.

MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating.

Note for Srl Item No 60 to 63. Make of MCCB & MCB - L&T / LEGRAND / SCHNEIDER

Earthing complete with galvanized steel earth plate electrode 600mm x 600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mm dia by means of bolts, nuts, check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit, charcoal common salt, Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe, G.I protection pipe 15 mm dia up to 7.5m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-1991 (Part-I).

Supply & Fix LED bulb of 7 Watt. Make of Havells/Philips/Crompton

Supply & Fix LED bulb of 9 Watt. Make of Havells/Philips/Crompton

S &F modular Switch piano flush type single pole one way 5 amps.

S &F modular Socket out let 2 in one, 5/3 pin 5Amp.

S &F modular Switch socket combination 6 pin, 3 module 5/15 Amps flush type universal .

S &F modular Bell push, flush type 5 Amps.

S &F modular Electronic regulator 100/120 Watt step type.

S& F MCCB DB VERTCLE TYPE made of sheet steel, powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade, 415Volts TPN with 4 way Double door, L&T CAT No DBVTL004DD/ LEGRAND CAT NO-607913/ equivalent of ABB.

Supply & Fix single phase KWH meter with LCD display with box of rating 5-30A all as directed by Engr-in-Charge.

Supply & Fix three phase four wire KWH meter with LCD display with box of rating 10-40A counter type all as directed by Engr-in-Charge.

Supply & Fix in repair 6 Litre (White/Blue colour) instant geyser with LED indicatorwith colour changing, ABS body, stainless stell inner tank of 304 grade working with 0.65 MPa bar pressure, ISI Marked and ISI cerification with all accessories all as specified and directed by Engr-in-Charge. Make -Havells instanio 6 litre or Jaquar 6 litre Elena electric storage or Crompton repid jet Plus 6-5 star.

Supply & Fix in repair 15 Litre (White/Blue colour) storage geyser with LED indicatorwith colour changing, ABS body, stainless stell inner tank of 304 grade working with 8 bar pressure, ISI Marked and ISI cerification with all accessories all as specified and directed by Engr-in-Charge. Make - Havells adonia or jaquar Elena prime storage water heater or Recold andris slim 20 litre horizontal.

Supply & Fix in repair 300 mm Sweep exhaust fan of size 395mm x 395 x 210mm (length x width x depth) with double ball bearing heavy duty, 230 volt, protective bird guard, robust construction, high velocity with louer complete nut, bolts as per site requirement all as directed by Engr-in-Charge. Make- Havells Ventil Air DB 300 Exhaust fan (Pista Green), or Usha 300 mm aeroclean plus metal exhaust, double ball bearing, (grey) or Bajaj Bahar 300 mm exhaust fan (Metallic grey).

Supply & Fix in repair ceiling fan of 1250 mm sweep glaze fan, elegant white, exotic rich look with modern styling, air delivery 280 cum mtr/minut, rated seed 280 RPM, blade finish, dust and mark resistant, stronge 18 pole high torque motor, frequency 50 HZ, with dust and mark resistant coating including Fan motor, blade set, downrod, canopy set, shackle kit and twisted wire, guarantee card with two year warrenty on product with complete accessories all as directed by Engr-in-Charge. Make- Havells Havells stealth air (elegant white) or Crompton SilentPro Enso 1200 mm 3 blade (silk White) or Orient electric aeroquiet 1200 mm premium (white).

S&F in repair Ceiling fans 1250 mmwith air purifier & remote control (Peral whiteb LT copper, corded electric, high velocity aerodynamically designed blades made of componded ABS to gives less friction with air purifier up to 95% per hour all as specified and directed by Engr-in-Charge. Make -Havells stealth puro air 1250 mm ceiling fan with air purifier& remote control (FHCBBULPLC48) or Orient electric aeroslim1200mm BLDC motor with IOT, remote& under light (brown) or Usha fontana lotus 70 Watt gold lvory 4 blades sweep 1230mm.

S&F in repair wall mounted fans 450 mm sweep with 3 blades with three number speed settingincluding mounting accessories kit, 1400 rpm,all as specified and directed by Engr-in-Charge. Make Havells V3 450 mm (silver/Black), or,Orient electric 450 mm Tornado (black metal) or Usha colossue rust free aluminium blade (Red).

Note. Ser Item No 75 to 80 catered against BER Items.

Dismantling of existing u/s steel LT poles of any size & type from its position carefully and removing from the site and including necessary excavation and earth work in any soil/strata, demolition of concrete, disconnection of conductor from pole etc. complete all as directed.

Supply and install steel, tubular swaged poles complete with cast iron base plate, finial taper plug nuts and taper plug, bolts, nuts and screws as specified type 410-SP- 31 (9.0 m long) complete all as specified and directed. Note : Excavation, earth work shall be measured and paid separately.

Dismantling/taking down steel tubular/pcc pole of any size including insulater & cross arm& stay wire & refixing at new location including condutor of 30 mtr each span ( 5 nos of 30 mtr each span conductor) directed by Engr-in -Charge. Note :- Excavation, earth work & PCC shall be measured & paid separately.

Excavation in trenches for laying of cables, poles and stay in any type of soil not exceeding 1.5 mtr wide and n. exc 1.50 mtr deep, n. exc 10 Sqm on plan and getting out complete all as sp[ecified and directed.

Same all as per Srl Item No 84 but depth exc 1.5 mtr and n. exc 3.00 mtr deep and getting out.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc. 25cm complete all as specified and directed by Engr-in-Charge.

Removing excavated soil n.exc 50 mtr and depositing where directed at a level n. exc 1.5mtr above the starting point complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation of poles etc complete all as specified.

M&L for Plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete for stays,foundation and platform for transformer installation complete all as specified.

M&L for Plain cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate for coping of pole with and including formwork complete all as specified and directed.

Taking down u/s LT U/G cable (including all mounting accessories, bricks and sand etc ) from trenches, wall, floor etc and removing to store for safe custody upto 300 sqmm complete all as specified and directed. Note:- Excavation for taking out cable will not paid for separately, the cable shall be deemed to have taken down from the trenches excaveted for laying of cables.

S&F XLPE insulated armoured and PVC sheathed "heavy duty" electric cable with aluminium conductor 1100 volts grade laid in trenches, passing through pipes /ducts including testing complete of following cross sectional area of the following sizes:- Note:- Rate is inclusive of cable gland & cable lugs. Make : Havells/GLOSTER/PolyCab.

2 core, 10 sqmm cross sectional area.

3.5 core, 95 sqmm cross sectional area.

3.5 core, 300 sqmm cross sectional area.

S&F in repair 6 sqmm sheathed multicore copper conductor indistrial flexible cable, 2 core, current carring capacity 38 Amps, no of conductor 84, nominal conductor daimeter 0.3 mm, cable length in each roll 100 mtr, for connection of bollard light, high mast light, decorative pole light etc all as specified and directed by Engr-in-Charge. Make Polycab SKU ELE.FLE.42416361 or Havells SKU ELF.CAB.41407225 or V Guard Item Part No V2W450.

S&F in repairs 40mm bore, GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and as directed. Make :- JINDAL/ ZENITH/ TATA/ PRAKASH

S&F in repairs 50mm bore GI steel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and directed. Make - JINDAL/ ZENITH/ TATA/ PRAKASH

S&F in repairs 80mm bore GI seel tubing "light grade" for cable protection passing under road /floor or for fixing to poles complete all as specified and directed. Make - JINDAL/ ZENITH/ TATA/ PRAKASH

Cutting of hardstanding/ Road for laying of pipe line/cable and making good surfaces after lying of pipe line/ cable upto 30cm in depth as per existing specification complete all as specified and directed.

M&L unwashed Sand cushioning to under ground cable provided with a layer of 8 cm deep before laying and 15 cm covering above the top edge of cable after laying complete all as specified. Note : Measurement shall be done after puning down of sand.

M&L Brick covering with width equal to length of bricks as mechanical protection to cable with well burnt sub class `B` old size bricks laid dry and flat complete all as specified and as directed.

Taking down partly unserviceable/unserviceable security/street/gate/flood light fittings from poles/ towers/ Perimeter Fencing of any type upto 15 m height by manual or mechanical means and for necessary repair and make srviceable as per complaint given by department (E/M service cell) through job card/complaint register on day to day basis all to the satisfaction of Engr-in-Charge & complete all as specified and directed. Note :- Ballast, Lamp holder, capacitor, ignitor, covers and lamps of required wattage/type shall be measured and paid separately. Note :- Contracor shall deploye One electrician with helpers with all arrangement including ladder, safty belt, hand globes as per safty norms.

Fixing only repaired serviceable fitting of any size, and any make complete all specified and directed by Engr-in-Charge.

S&F in repairs Lamp holder porcelain suitable for street light fitting Screw type E-40 base. Make: Bajaj/Havells/Crompton

S&F in repairs Lamp holder porcelain suitable for street light fitting Screw type E-27 base. Make: Bajaj/Havells/Crompton

S&F in repairs LED Lamp 40/45 watt type Retro fit E-22 base. Make: BajajPhilips/ Crompton

Taking Down of street light Bracket including clamps of any type/any size from to pole/wall including necessary nut & bolts as directed complete all as specified and directed.

S&F GI pipe bracket made of light Grade tubing of size 40 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt, nuts & washers complete all as specified and directed.

S&F GI pipe bracket made of light Grade tubing of size 32 mm bore, duly bended by hot forgoing length 1.20 mtr including two sets of clamps made of 30mm x 5mm thick Flat iron with GI bolt,nuts & washers complete all as specified and directed.

M&L for Preparation for surface of existing steel poles including cross arms, nuts, bolts, for painting LT pole 7.5 mtr long above ground level and applying one coat of approved quality of aluminum paint all as directed by Engr-in-Charge.

S&F LED 25 watt building security light lumanaries pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection, impect resistance IK08, energy efficient including bracket 40 mm dai. Make: Havells endure sundown item code ENDURASUNDOWNNSL25WLED765PASYBOP, or Philips smartbright BRPO46 LED 30 CW MR S1 PSGR, or Wipro garnet street light 50W D925065

S&F in repairs sheet metal box of size 60cm x 60cm x 20 cm for fixing street light timer switch, frame pole mounted type fabricated out of 1.6 MM sheet steel including powder coat painting over a coat of red oxide primer including, consisting of the following :- (a) MCCB 63 A 25 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu & L&T cat no- CM97919OOH2OG /Legrand cat no-420013/schneider cat no-LV510315 - 2 nos (b) Astronomical, Multifunctional digital time swithces cat no 004767 of legrand or equivalent of L & T cat no- T2 DD T7/MDS/GIC - 1 no. (c) Power contactor ML-4, 3 pole rating not less than 70 A with 230 coil make L&T/SEIMENS - 1 no. (d) Internal wiring and, clamp - 02 no made out of 40 x 5mm flat & angle 40 x 40 x 5mm -0.90m long -2Nos. (e ) MCB SP 6 amps-1 No

Earthing complete with galvanized steel earth plate electrode 600mm x 600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mm dia by means of bolts, nuts, check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit, charcoal common salt, Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe, G.I. protection pipe 15 mm dia up to 7.5m long, PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate, PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (part-I).

S&F in repairs PVC junction box IP 65 Protection of size 0.200 x 0.250 x 0.115 complete with 1 Nos of MCB SP 2.5 Amps & 4 way industrial connector including Clamp made out of MS flat 30 x 5 mm, connection from junction box to street light fitting with three single core PVC insulated & PVC sheathed wire 2.5 Sqmm copper. Make of Box- SPELS BERG/ SINTEX/ HENSEL.

S&F in repairs PVC insulated 3 core 2.5sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed. Make: Finolex/Plaza/Havells/CCI/PARAGON.

S&F in repairs PVC insulated 3 core 1.5sqmm multistranded COPPER conductor for connection of Security light from JN BOX to Security light /OH conductor to security light all complete as specified and directed. Make: Finolex/Plaza/Havells/CCI/PARAGON.

S&F in repairs Astrorex D-22, Multifunctional digital time swithces. Make : Legrand/L & T/ MDS/ GIC

S&F in repairs galvanized earth strip 32 mm x 6 mm for earthing from earth plate to equipment complete fixed on pocelain insulator every 1 meter interval complete all as specified and as directed.

S&F MCCB 630 A 35 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified. Make :Legrand/Havells/ L&T

S&F MCCB 400 A 35 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified. Make : :Legrand/Havells/ L&T,

S&F MCCB 250 A 35 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified. Make : :Legrand/Havells/ L&T

S&F MCCB 200 A 35 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified. Make ::Legrand/Havells/ L&T,

S&F MCCB 160 A 35 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified. Make : :Legrand/Havells/ L&T,

S&F MCCB 125 A 25 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified. Make : :Legrand/Havells/ L&T,

S&F MCCB 100 A 25 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified. Make : :Legrand/Havells/ L&T,

S&F MCCB 63 A 25 KA, 4 POLE, thermal magnetic relese, Ics=100% Icu complete all as specified. Make : :Legrand/Havells/ L&T

Taking down MCCB any type & any size.

S&F LED street light lumanaries of size 60 W pressure die cast aluminium housing with heat resistance toughed glass & IP66 protection Make:Havells 60 W Endura Omni LHETATU7PAJ060 or Jaquar 70 W cover item code CW LSRT015070XC, WW-LSRT015070XW, or Panasonic 75W LED Order Code PSTM01757.

S&F LED flood light with wide beam energy efficient 200 Watt, IP65, aluminium die cast, 20000Lm lumen output, -20 to 60 degree working temp range, input voltage 90-300V, frequency 50Hz all as spesified and directed by engr-in-Charge. Make: Syska BLE model 200W or Bajaj Amaze LED bay light BJFL 200W or Philips flood light 200W BVP184

S&F bollard light 9 Watt LED, graphite grey power coated GI pipe housing,mushroom shape opal acrylic diffuser, LEDs mounted on die cast alumminium, driver for 9 Watt LED, working temp 3000K +250K, IP-65, Luminaire will provided with base plate and fixing holes for directly mounting on the concrete pedestal , 4.5 KV surge protection all as spesified and directed by Engr-in-charge. Make- Bajaj Tetris bollard light BGBOS 600 9W LED or Philips yolo LED outdoor Pedestallantern 9W 58169, or, Havells BAMBOO LED BOLLARD 8w PCM.

M&L in repair for decorative pole cast aluminium heavy pole designer legs and broader designar base finished with polyurethane paint ( with prior treatments ), daimetr of one leg is appx 76 mm, 03 nos "T" shaped bolts with nuts & washer provided for concrete foundation. totel length of pole including base and legs (base x 03 Nos legs) is 2057 mm, fully cast aluminium body finished with polyurethane paint (with prior treatments) with acrylic window cover totel length 914mm (36 Inch), B-22 Brass holderprovided with aluminum cover as per :IS 10322 part-5 section-1, latest 2017, suitable for 30 to 40 Watt LED bulb or 45 to 110 watt CFL, (totel hight of pole with light 9 feet 9 inches complete with all accessories including PCC and exavation if required with fitting of 40 Watt LED bulb all as specified and directed by Engr-in-Charge. Make Mepro Electrical product code 9405 or equivant of jaguar or crompton or from OEM similar as mentioned in discription Note: in case of non aviability of product of equivalant make mentioned product code shall approve for installation.

M&L for 9 mtr GI Octagonal pole top 70 mm bottom 155 mm 3 mm thikness with base plate 250 x 250 x 16 mm and GI 64 micron, M24 x 750 en 8 grad foundaction bolt and with two nos bracket at 180 degree each including 100 Watt LED light assembled on bracket of 40/50 mm dai including nut, bolt, washers complete including exavation 1.5 mtr depth, PCC, with PVC junction box IP 65 Protection of size 0.200 x 0.250 x 0.115 complete with 1 Nos of MCB SP 2.5 Amps & 4 way industrial connector including Clamp made out of MS flat 30X5 mm, connection from junction box to street light fitting with three single core PVC insulated & PVC sheathed wire 2.5 Sqmm copper all as specified and directed by Engr-in-Charge. Make of pole : Bajaj/National tubing/Jindal, Make of LED Light : Havells/Philips/Bajaj, Make of Junction Box:SPELS BERG/ SINTEX/ HENSEL.

Schedule of credit amount of Rs. 1,24,113.00 to be deducted during AOC

Goodluck Enterprises

shri krishna traders

SHIVALIK ENGINEERING WORKS