PROVN OF CERTAIN MINOR WORKS INCLUDING ALUMINIUM/GLASS CUBICLES OF L-IN AIRMEN BILLETS AND MODIFICATION OF EXISTING MAIN SECURITY GATE AT AF STN FARIDABAD UNDER AOR OF GE (AF) FARIDABAD

Amount

Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar ur cement lime mortar inci all quons, arches, pillars etc but excluding ashlars facing dressed complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Excavation in trenches n nexc 1.5m wide and n exc 1.5 m in depth, for foundation manholes, wells, drain etc.getting out in soft/loose soil complete all as specified and directed.

M & L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggregates) lean concrete as in foundation, filling and mass concrete complete all as specified and directed.

M&L RCC M-25 (20mm graded crushed stone aggregates) work as in foundation, including rafts footing beam etc complete all as specified and directed.

M&L RCC M 25 (20mm graded crushed stone aggregates) work as in columns, pillars, piers, post and struts etc complete all as specified and directed.

M&L for Mild steel bars (TMT) 10 mm dia and over cut to length bent to shape required, including cranking bending spirally for hooping for columns hooking end and binding with mild steel wire or securing with clips quality confirming to TMT bars complete all as specified and directed.

All as per item No 08 above but 5mm dia and over upto and including 10mm dia in Stirrups spacers and binders.

M&L for use & waste form work to side of concrete foundation, footing, bases of columns, raft sides and soffits (if any) of foundation and plinth beams with fair finish surface etc complete all as specified and directed.

M&L for use & waste form work to sides of column fair finished surface of concrete etc complete all as specified and directed.

M& L 20mm thick granite (of any type) work in pillars and dado in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite over & including 15mm thick screed bed in CM 1:4 complete all as specified and directed

M & for 10 mm thick cement plaster in cement mortar 1:4 to bricks or concrete surfaces to be finished even and smooth (without using extra cement) complete all as specified and directed.

S&F Fe-290(Gde-E-165) framed work as doors or gates of angle or other section with Kgs gusset plates rails, braces with ornamental and intricate design Complete drilled for fixing of steel sheeting or other covering Door, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fiftting (exc of steel sheeting or other covering running rails and guides and hanging also fastening and fixing complete all as specified and directed.

S&F 1.25 mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work 11 size holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up mitered angles, etc: if sheeting is welded to frame as required complete all as specified and directed.

S&F Wire netting of stainless steel wire 1.4mm dia and average width of aperture size of mesh 25mm and fixed with tinned tacks of stainless steel wire staples complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Removal of excavated soil to a distance exc. 250m but and n.exc 500 m and deposited where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Returning filling in. including spreading, leveling, watering and well ramming in layer not exc 25 cm complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan not exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for rendering, 15 mm thick, in cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of distemper oil emulsion on wall surfaces including chalk whitening preparatory to distempering complete all as specified and directed.

M&L for complete removal of existing treatment of walls including preparing old plaster surfaces filling of holes with plaster of paris, and applying two coat of oil bound distemper over applying a coat of wall care putty on walls 1 mm thick complete all as specified and directed.

S&F 300mm size stainless steel letters, in Hindi / English and fix with stainless steel Screws, complete all as specified arid directed

S&F powder coated above to (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors windows, ventilators and partition walls with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L for pre-laminated 12 mm particle board, interior grade, pre-laminated both sides with decorative choice lamination both side & fixed with screws to aluminium frame work complete all as specified and directed.

Excavating in posts holes (or similar holes) in Soft/loose soil each n.exc 0.50 cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

M&L for rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting platesFe 410-W(Gde-E- 250)quality-A complete all as specified and directed.

S & F Plates( Plain or chequered ) of Fe-410-W (Gde-E-250) Quality -B channels,square cut or notched (ordinary and counter sunk) forming holes, without any attachment omplete all as specified and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L For Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (Fe-410-W (Gde-E-250) Quality -A) complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S & F Plates( Plain or chequered ) of Fe-410-W (Gde-E-250) Quality -A channels,square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F Fe-410-W (Gde-E-250) Quality -A Joint, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.

S&F Mild Galvanised Iron Sheet (16 guage) thick along with three hooks for hanging fire fighting cylinder.Size of sheet (1mtr X 1 mtr) complete all as specified and directed.

M&L for framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be repared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and guard bars and hanging; also fastening and fixing complete(Fe 410-w (gde-E-250)quality A) complete all as specified and directed.

S&F powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed.

S & F Sheet glass 4mm thick, ordinary quality, in squares exc 0.5 sq. m each pane complete all as specified and directed.

M&L for preparation of new surfaces of steel of any description, n exc 10cm in width or girth,with two coats of synthetic enamel paint over a coat of zinc chromium primer including preparation of surfaces complete all as specified and directed.

M&L for Surface dressing n exc 15 cm deep in soft loose soil complete all as specified and directed.

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface(broken boulders or stone) complete all as specified and directed.

M&L for 50 mm thick PCC 1:4:8 type D-2, (using 40mm graded crished stone aggregate) as in sub base all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.(size=450x300x150mm) complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations,fillings and mass concrete, complete all as specified and directed.

M&L for supplying and laying yamuna sand complete all as specified and directed.

M&L for Structural steel, rolled section such as joist, beam, channel, angle, tee,in available lengths Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for Mild steel in flat, round or square bars, in available lengths Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm complete all as specified and directed.

Supply and fix wall mounted cabin fan super high speed portable 450 mm sweep,220-240 volt AC,50 Hz sigle phase with Thermal overload protected motor complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (Nominal area) PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper concuctor in and including PVC concealed conduit 20mm dia medium grade ISI marked and conduit accessories along with continuous earth wire 1.5 Sqmm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including complete with all accessories for one three pin 5 Amps socket out let on independant board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and directed.

S&F Piano switch, flush button single pole one way 6 Amp complete all as specified and directed.

S&F socket outlet, flush type 2 in 1, 3 pin 6 Amp complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

M&L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying machine including filling cavities with filler, one coat after cleaning all dust and write MES No ___ with black paint etc complete all as specified and directed.

S&F Anti-Suicide fan rod (12'') white/brown, MS pipe zinc plated, 19 mm OD, 1.8+/-0.05 mm thick,spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 kgf+ and spring 'hidden in the pipe' will expand to about 1 mtr or more complete all as specified and directed.

Labour only Hanging ceiling fan by assembling all anti sucide fan rod and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Supply and install hi wall split units indoor/outdoor with inverter power indoor/outdoor with inverter power supply (V/Hz/Ph) 230/50/1 phase complete with cordless remote control unit and with in built air ioniser, blue fins and plasma filter for better indoor air quality with high EER twin rotary compressor-BLDC, copper condenser coil, variable speed compressor which adjusts power depending on heat load energy efficient and lowest-noise operation capacity: 1.5 ton suitable for large sized rooms, Energy Rating: 5 star rated having ISEER value 4.60, Regrifgerant gas : R 32, Environment friendly- no ozone depletion potential & low global warming potential with suitable MS mounting stands for indoor and outdoor unit includig connecting Cu tubings, drain pipe, connecting Cu cable and Cu power cable complete all as specified and directed by Engineer-in-Charge. NOTE : (a). The rate deemed to be included the rate of labour for taking down the old unsrviceable ACs (b). The rates quoted shall deem to include the cost of cutting holes in the brick wall for passing copper tubing and making good the surfcaes to match with adjoining surfaces include fixing with angle iron into any type of wall for out door unit whereever reqd. (c). The cost of copper tubing of size 5/8" and 1/4" with suitable insulation up to a length of 4.5 mtr is deemed to be included in the unit rate quoted.

Supply and fix Voltage Stablizer for automatic operation , single phase natural air cooled indoor type & desinged for input variation between 170 V to 250 V with output voltage stabilized at 230V with accuracy of + and of capacity 4.0 KVA complete all as specified and directed.

Supply and fix MS stand factory made for installation of condensing unit of split type AC on wall/ground duly powder coated all as per site requirement complete all as specified and directed.

Supply and fix drain pipes 1.5" dia heavy duty rigid PVC from indoor unit to exit point as per design including accessories clamps fastener etc complete all as specified and directed.

M&L in repairs,two single core PVC insulated cable with copper conductor multi stranded 4 Sqmm in and incl. duly drawn through and including concealed PVC conduit suitable size as sub main with continuous earth wire 4 Sqmm size and connecting to common earth dolly all complete all as specified and directed by Engr-in-charge.(Flexible Copper Wire Used In shall be FRLS) complete all as specified and directed.

Supply and fix Single pole and neutral encloure with a two pin and earth plug and socket complete with one double pole 20 Amp MCB complete all as specified and directed.

H.B. Traders (BID ID -3485208)

MAA VAISHNO INDUSTRIES (BID ID -3488241)