Providing LED street security lights in campus of 174 Nos BOPs along Indo-Pakistan Border IPB and Indo Bangladesh Border IBB SH Providing fixing of security light along the periphery of BOP MAUZAM FWD of 66 Bn (Now 19 Bn) BSF under SHQ BSF Abohar

Supplying and drawing 3 x 1.5 sq.mm sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. ( for pole wiring )

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5 x 25 sq. mm (28mm)

3.5 x 50 sq. mm (35mm)

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 100 mm dia

Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc complete as required

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Earth work in excavation by mechanically means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth,1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed. All kinds of soil ( .70 mtr width X .70 mtr length X 1 mtr depth = .49 cum for each pole)

Providing and laying in position specified grade of reinforced cement concerte, excludilng the cost of centering ,shuttering, finishing and reinforcement-all work up to plinth level: 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) ( .60 mtr width X .60 mtr lenth X 1.6 mtr depth = .576 cum for each pole)

Centering and shuttering including stutting, propping etc. and removal of form of : Foundations, footings, bases of columns, etc. for mass concrete ( for one side .60 mtr width X 1.60 mtr lenth = .96 sqmtr for four sides .96x4 = 3.48 sqmtr for each pole)

Steel reinforcement for R.C.C. work including straightening , cutting, bending, placing in position and binding all complete above plinth level. (Thermo Mechanically Treated bars) a) 12 mm steel for vertical of 08 nos x 1.6 mtr lenth = 12.8 mtr Weight 12.8 x 0.88 kg/mtr = 11.264 kg b) 08 mm steel for horizontal of 06 nos x 2.5 mtr lenth = 15 mtr Weight 15 x 0.39 kg/mtr = 5.85 kg Total weight for each pole a + b = 17.11 kg

Supplying and errection of Hot dip galvanised 7 mtr GI octagona l(8 side) pole with 01 mtr bracket, Material of Octagonal pole-Grade ISH430LA as per IS:5986:2017 latest,No of section (in Nos.) -01,Cross section of Octagonal pole (no of sides) -8 sided polygon,Internal distance between parallel faces at the base of pole (in mm)-130,Internal distance between parallel faces at the top of pole (in mm)-70, Octagonal pole sheet thickness (in mm) -3 mm,Type of welding-Seamless Single longitudinal Saw weld (No circumference weld allowed), No of longitudinal welds (in Nos-01 Nos, Metal protection treatment of fabricated mast section-Hot dip Galvanised, as per IS:4759 latest: 460 g/m2, Luminaire carriage / brackets -Fabricated suitably and hot dip galvanized for fixing and holding, required no. of light fixtures, Door opening on base of the pole (opening permits clear access to equipment like MCB, Switches, cables, etc.-Door opening: 500 mm height from base plate, Size: 100 mm x 500 mm with Gasket, Type of locking arrangement for door-Pad lock with key,Base plate material-Grade: E250, Quality:BR (as per IS:2062:2011 latest), Base plate size - ( Length in mm x Width in mm x Thickness in mm)-200x200x12, Necessary accessories on each pole -Suitable foundation Bolts - 4 nos., Foundation Bolt type -J-Type, Conformity of specification for Bolts and Nuts -as per IS:1367 (Part 2) , Grade B,Galvanization of foundation bolts and nuts and octagonal pole shall be Galvanized-As per IS:4759 latest, Earthing terminals on the base of the pole, for lightning and electrical protection-Using 12 mm dia SS Bolts of suitable length,Compliance to wind velocity test for the pole structure -IS 875:1987 part 3 latest, Regional wind withstand capacity which the pole structure support is suitable to withstand (in m/s)-50, Gust Factor -1.15, The designed Life of the Pole shall be (in Years) -25 years.

Supplying and fixing of C curve 1 Nos MCB 6-32 Amp on din bar along with 6 mm thick backelite sheet of suitable size(as per drawing issued by engineer in charge) and 4way heavy duty connector or 2 way brass connector (02 Nos hole type) mounted on 6mm thick bakelite sheet & making holes to fix the sheet & should be provided for incoming and outgoing cables connection in the existing chamber/Din Bar of pole.

Installation testing and commissioning of 45 watt LED street light in existing 7 Mtr height octagonal pole and making connection etc as per site requirement

SITC of various sizes water protected outdoor (Water proof) hut type compartmentalized type double door cubical panel both side opening having depth up to 450 mm suitable for 415 Volt, 3 phases, 50 Hz made out of 2mm thick CRCA sheet with required hardware duly painted with powder coated .Panel having separate detachable gland plate, angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the feeder pillar (minimum height 60cm), hinged door, both side opening with locking arrangement, earth bar/stud, led pilot light for phase indicator (R,Y,B) on top, 400A/415V 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with 25% extra current carrying capacity of MCCBs and solid copper conductor cable 10 sqmm/ solid aluminium rod for MCBs (approved by Engg in charge) for incoming/Outgoing cables, links for spare MCCBs, heavy duty connectors/ terminals for three and single phase cable connections for MCCBs where as required and marking of location for incoming and out going distribution i/c grouting the legs in existing floor with 1:3:6 cement concrete foundation and dsimantling the existing panel, incoming/outgoing cable connections etc complete as required i/c dismentling the existing feeder pillar and UG cable. (Panel should be as per design & drawing approved by Engg in charge).LED light min 5 watt with on/off switch to be provided in the panel.

Supplying and fixing 63 Amp TP C Curve, 415 volts, MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required

Providing and fixing following rating and breaking capacity Triple Pole 415 V MCCB with thermomagnetic release (With Thermal Magnetic Trip Unit (TMD) with terminal spreaders link in new cubicle panel(item no.22) including drilling holes in cubicle panel, making connections, interconnections with busbar spreader links etc. as required. of approved make by engg in-charge.(A) 100 Amp/415V, breaking capacity 25 KA

Providing and fixing 40 Amp DP Isolator in the existng MCB DB complete with connection, testing and commissioning ets as required.

Supply, Installation , testing and commissioning of set of 01 Nos of 150 watt (Variation of more than +/- 5% would not be allowed) outdoor type LED flood light luminary having minimum efficency 120 Lumen/ watt outdoor type Non integral LED luminary light should be Main housing/heat sink material of high pressure dia cast aluminium, Front cover material- clear toughened glass,Lences-LEDIL secondary asmmetric lens along with heat sink fins to dissipated heat effectively with adjustable mounting brackets on pole , Ingress protection-IP66 & above, Impect resistance-IK08, input operation voltage range & frequency 140 to 270 Volt AC at 50 Hz +/- 2Hz , Rated voltage 240 volt AC 50 Hz , PF not less than 0.95, operating teperature range -10 deg C to +50 deg C, working life of LED is minimum 50,000 hrs burning hrs @L70 , surge protection 5KV Internal &10 KV SPD, Correlated color tem- 3000K (as per ANSI) , with Gears of Electronic constant current potted driver (CC driver) efficiency with >85%, Short & Open circuit Protection, No Load, Overload EMI Envoirmental equivalent & Phase to phase protection 320V for 48Hrs & 350V for 24Hrs & all accessories etc as per specification etc . LED light suitable for mounting on the existing pole bracket & drilling of holes as required, making connection with 3 X 1.5 sqmm FRLS grade PVC insulated copper conductor cable from loop box to fitting i/c providing and fixing suitabe size of flexible pipe / insulaiton sleave with accessories from top slot of pole to fitting connections, interconnection etc.as per specification complete required.

PITC of Onload Four Pole Changeover Switch with sheet encloures,Eurolad/Ambidex, Ue-415 Volt, Ui-1000 Volt, AC,50 Hz 160 Amp, AC-23A, on wall with (25x300x 3 mm ) x4 nos MS iron Strip with fastner,Connection, interconnection with existing cable itc as required.

Providing and fixing of 0.5 mtr GI Channel size 100 mm x 50 mm x 6 mm (9.56 Kg per Mtr) arm for installation of flood light on existing GI pole complete with clamps, bolts and nuts including drilling holes for installation of flood light etc as required.