Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.8 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST AND REASONABLE | |
| 2 | L2₹20.5 L+₹1.2 L (6.29%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST | |
| 3 | L3₹21.2 L+₹1.9 L (10.0%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST | |
| 4 | L4₹23.8 L+₹4.5 L (23.1%)Rejected-Finance F A ROAD MACHKHOWA PO PS BHARALUMUKH DIST KAMRUP M ASSAM GUWAHATI 781009 | KAMRUP METRO | ASSAM | 781009 | L4 | Rejected-Finance OTHER THAN LOWEST |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
10 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE UMROI
Military Engineer Services Garrison Engineer Umroi Umroi Military Station PO - Barapani, Shillong-793 103
CERTAIN REPAIR TO B/R ITEMS IN OTM AND MD ACCN AT ZONE III AND IV AT UMROI MIL STN UNDER GE UMROI
2023_MES_593559_1
8724/E8
Open Tender
Civil Works
Item Rate
180 days
UMROI
As per tender documents
8 documents required · 8 mandatory
₹500
GE UMROI
₹50,000
28 Jun 2023
6 May 2023
12 Jun 2023
6 May 2023
10 Jun 2023
22 May 2023
Amount
Taking down chowkats or frame exc 1.50 sqm but n.exc 4.00 sqm with shutters (without taking off shutters from the frame), complete all as specified and directed.
Taking down chowkats or frame n.exc 1.50 sqm with shutters (without taking off shutters from the frame), complete all as specified and directed.
Taking down shutter of any description exc 1.00 sqm but not exc 2.00 sqm each, complete all as specified and directed.
Refixing of shutter in same opening after repairing complete area exc 1.00 Sqm but not exc 2.00 Sqm, complete all as specified and directed.
Material & labour for 2nd class hard wood, plain, solid straight chowkats and frames worught, framed, rebated on the solid rounded of chamferred, put together with glue, pinned at joints supplied and fitted, complete all as specified and directed.
S&F pressed steel door frame 125x60 mm with one or more rebate including necessary fixing lugs hings, lock strick etc, complete all as specified and directed.
S&F pressed steel door frame 105x60 mm with one or more rebate incl necessary fixing lugs hings, lock strick etc, complete all as specified and directed.
Material & Labour for PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in filling of pressed steel frame, complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
M&L for 35 mm thick 2nd class HW factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge, etc (without sash bars) , edges of framing plain, chamfered of rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkhats, complete all as specified and directed.
M&L for 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed.
S&F aluminium powder coated [Minimum 50 Micron thick] anodised aluminium sliding frame and shutter for windows/ventilation with 92 mm x 31.75 mm x 1.5 mm thick three track section for frames and 40 x 18 x 1.50 mm thick sliding section for shutters of both gauzed and glazed with 4 mm thick tinted glass, aluminium Deco Grill of Model / Design No. DG 104 and stainless steel wire cloth [0.63 mm nominal dia and avg width of aperture 1.40 mm] including necessary jointed, cleats powder coated glazzing clips, powder coated aluminium snap beadings, screw and aluminium fittings, suitable handle, complete all as specified and directed.
Supply and Fix anodised powder coated (minium thickness 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.
Supply & Fix powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters (sliding type), aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and as directed.
Anodised aluminium door shutters, aluminium section weighing 0.75 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed.
M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane or aluminium beads fixed to steel etc complete all as specified and as directed.
M&L for 4mm thick figured glass, n.exc 0.50 sqm each pan, pin headed type and glazing with oil putty or aluminium beads fixed to steel etc, complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.
Material & labour for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.
Material & labour for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples , complete all as specified and as directed.
S&F aluminium alloy handles size 150mm fabricated type anodised , complete all as specified and as directed.
S&F aluminium anodised barrel tower bolt 200mm size of extruded section and fixed , complete all as specified and as directed.
S&F aluminium anodised barrel tower bolt 150mm size of extruded section and fixed , complete all as specified and as directed.
S&F 300mm long aliminium alloy ,anodised sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast alunimium alloy and fixed , complete all as specified and as directed.
S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed , complete all as specified and as directed.
Material & labour flat iron mild steel for hold fast size conforming to Fe-410-0 or Fe-310-0 , complete all as specified and as directed..
S&F repair helical door spring 300mm long including roller and roller plate, complete all as specified and as directed.
S&F in repair tubular 20mm curtain rod chromium plated , complete all as specified and as directed.
S&F in repair brackets chromium plated for curtain rod in any size complete all as spd and dir.
Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc , complete all as specified and as directed.
M&L for 15mm thick rendering in CM (1:4) in two layers mixed with water liquid water proofing compound as per manufacture instruction in top layer 5 mm thick finishing the surfaces with fair and even without using extra cement of any description including racking out joints for key scrubing with water, complete all as specified and directed. . Note: Liquid water proofing compound of Make - Conplast WL,Sika,Dr.Fixit measure separtely.
Supply only integral WPC (Liquid water proofing compound) and application as per manufacture instruction , complete all as specified and as directed. Make - Conplast WL,Sika,Dr.Fixit
M&L for rendering 15mm thick in cement mortar (1:6) internal surfaces on other than fair faces of brick work or concrete surfaces, complete all as specified and directed.
M&L for preparing surfaces of newly plastered on walls and applying two coat of distemper oil emulsion including internal wall putty 1.5mm thick whiting preparatory to distempering, complete all as specified and directed.
M&L for preparing surfaces of newly plastered on walls and ceiling and applying two coat of acrylic smooth exterior paint including 1.5mm thick external wall puty oil emulsion including chalk whiting preparatory to distempering, complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls etc, laid , bedded and pointed in any mortar, complete all as specified and directed.
M&L for Green Marble 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.
M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed.
M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.18 sqm but n exc 0.38 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified
S&F coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match, complete all as specified and as directed.
Supply & Fixing of glazed ceramic coloured /printed tiles 350x250x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match on verticle surface of wall, complete all as specified and as directed.
M&L for 15mm thick screed bed or bedding laying of cement mortar (1:6) as in floor finishes, complete all as specified and as directed.
M&L for 10mm thick backing coat of cement mortar( 1:4 ) as in vertical surfaces such as skirting , dados etc, complete all as specified and as directed.
Demolition of cement concrete of any dsecription and in any position not otherwise specifically provided for etc, complete all as specified and as directed.
M&L for 75 mm thick cement concrete 1:3:6 type C1 using 20 mm graded aggregate as in plinth protection finished fair and even with using extra cement , complete all as specified and as directed.
Schedule of Credit
M/S D.R enterprise
M/S C.M.V CONSTRUCTIONS
M/S RAJA CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .