WBHD/AE/ESD-I/eNIT-37/2025-26

Amount

Dismantle of existing Cable along with necessary all the items for the same.

Supplying and fixing 2 Way MCB SS enclosure with with IP-20/30 protection, powder coated including 32A DP MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment (Make: Legrand / L&T / Crabtree)

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required a) 3 x 22/0.3 (1.5 sqmm)

b) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

Supply of 2 core 10 sqmm of 1.1 KV grade alluminium XLPE, PVC/ armoured LT cable ( Make : Havells/ Polycab/ KEI/ Finolex )

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below: 2 core 10sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 2 core 10sqmm

Laying of one No. 2 core 10 sqmm cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed

Supplying & fixing medium gauge 25 mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

Supplying of 25 mm dia HDPE PIPES pe 63, 5kgf/cm2 Make-supreme, type-SDR-17, Make- Supreme/Hensel/ Harse or similar make

Excavation of soil and laying HDPE/GI Pipe for cable laying filling & ramming. (0.150x0.450xTotal Length of pipe laying (WxDxL)

Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.

Supplying ready mixed concrete of M20 Grade with well graded stone chips of 20 mm norminal size containing designed qty of cement per Cu. M of wet concrete produce in computerised batching plant under controlled condition using approved super plastisizer , designing mix following I.S. 10262 and I.S . 456 , transporting the mix with agitation in transit mixer to work site depositeing the mix on a platform erected for the purpose at required level of concreting and then placing the mix its final location of form work , compacting and curing the same complete as per specification & direction of Engineer - in - charge including computerized batching plant transit mixer with all accessories vibrators etc. inclusive of all other incidental of platform and its supporting. Extra Conceret used in repairing of road for laying of 50mm G.I pipe on road (Bituminus) 300 mm X 300 mm X 800 mm = 0.072 Cu.Mtr minus(-) 0.05mm x 0.05mm x 0.05mm = 0.000125 Cu.mtr (for GI pipe portion) Total = 0.071 Cu.Mtr. x 15 (length in mtr.) = (Road x-ing portion repairing)

Providing and laying special type of median kerb with M-25 Ready Mixed Concrete with Size of 550 mm (H) X 300mm (L) X 150mm (thick)……. For Parking Lot area ( Considering 10.5 mtr , used kerb (sumo) 35 Nos.) N.B :- Item Narration , New concrete Kerb chanel Supply , Fitting & Fixing .

Protective and Decorative Acrylic exterior emulsion of approved quality , as per manufacture's Specification and as per direction of Engineer -in- charge to be applied over acrylic primer as required . The rate includes cost of material , labour , scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) Premium 100% Acrylic Emulsion

Supply of 80 watt flood light LED Fittings having Color Temprature : 5700, Voltage - 240V, IP-66.Diffuser made of high grade toughened glass, Potted Driver & High Power LED, Internal surge protection of 4KV with additional 10KV surge, Operating Temperature: -10 degree-50 degree ( Make : Philips / CG / Havells / Bajaj )

Supply & Delivery of 45W, 110lm/w Street Light LED Fittings having Aerodynamically designed street light with excellent thermal management, inbuilt tilt angle arrangement with IP66 protection, 10KV SPD included. ( Make : TRP-411-90-57-SL-GL-NSG, Crompton / Philips / Jaguar)

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.

Add. G.S.T.@ 18% (on Total from item no 1 to 20) to be calculated by bidder

Add. LWC.@ 1% to be calculated (on total from item no 1 to 20 + GST@18%) by bidder

SARKAR ENTERPRISE (BID ID -6750930)

MONDAL ENTERPRISE (BID ID -6777896)