REPAIR OF CHARPOY IP CHARPOY GI NEWAR PLYTOP FOLDING AND CANNING AND POLISHING PAINTING OF CHAIRS AT JAIPUR MILITARY STATION UNDER GE SOUTH JAIPUR

Amount

Charpoy IP Hard top (FD/E6/MAP/11)

Removing of existing unserviceable ply wood top from charpoy IP and S&F new 12mm thick plywood BWR grade Phenol bounded commercial plywood ISI Mark All as per drg and directed.

M&L gas welding to Charpoy IP where required and filling properly at places of welding point. Gas welding shall be done all around the conduit pipe and each welding with filling at one broken point shall be measured as one point ie one unit.

Removing U/S old long rails and supply and fix new long rail made of MS tubular pipe existing gauge but not less than 1.60 mm thick (hollow section) size 1920x 65 x 25mm (yst grade) ISI marked required as per drg

Removing U/S old short rails and supply and fix new short rail made of MS tubular pipe existing gauge but not less than 1.60 mm thick (hollow section) size 860 x 65 x 25mm (yst grade) duly ISI marked required as per drg

Removing U/S old legs and supply and fix new lags made of MS tubular pipe existing gauge but not less than 1.60 mm thick (hollow section) size 450x30x30mm (yst grade) duly ISI marked required as per drg

Removing U/S middle stiffnere and supply and fix new middle stiffnere made of MS tubular pipe existing gauge but not less than 1.60 mm thick (hollow section) size 860x25x25mm (yst grade) duly ISI marked required as per drg

Removing U/S leg stiffnere and supply and fix new leg stiffnere made of MS tubular pipe existing gauge but not less than 1.60 mm thick (hollow swction) size 860x25x25mm (yst grade) duly ISI marked required as per drg

M&L Painting of charpay IP hard top complete with Synthetic Enamel Black paint all external exposed steel surfaces of charpoys after scrapping of rusted paint complete as per drg all as specified.

Removing U/S PVC Shoe of Charpoy IP Hard Top and supply and fix new PVC superior quality Shoe of Charpoy IP Hard Top required as per drg and directed

Charpoy IP Folding (FD-388R)

Removing of existing unserviceable ply wood from charpoy IP and S&F new 9 mm thick plywood BWR Phenol bounded commercial plywood ISI Mark All as per drg and directed.

M&L gas welding to Charpoy IP folding where required and filling properly at places of welding point. Gas welding shall be done all around the conduit pipe and each welding with filling at one broken point shall be measured as one point ie one unit.

M&L Painting of charpay IP hard top complete with Synthetic Enamel olive green paint all external exposed steel surfaces of charpoys after scrapping of rusted paint complete as per drg all as specified.

Removing U/S PVC Shoes of Charpoy IP Folding and supply and fix new PVC superior quality Shoes of Charpoy IP Folding required as per drg and directed

Charpoy GI Pipe (FD-220)

Removing existing unserviceable nylon newar from GI charpoy including tightenging of charpoy elbow check nut and provn of supply, reweaving using with new nylon newar(not recycled) nylon newar of white colour closely weaven both side weight not less than 1.5kg each complete all as specified.

Removing U/S old long rails and supply and fix new long rail made of 32mm dia medium grade GI pipe ISI mark duly threaded both end as required as per drg complete all as specified.

Conversion of old long rails into short rail obtained from item No 3.02 above by cutting/finishing to shape and both end threated and replacing the old U/S short rail where ever required against unserviceable part as per drg as specified.

Conversion of old short rail into legs obtained from item No 3.03 above duly threading and fixing including S&F of lower and upper clamps for FMN Set of Charpoy GI Pipe duly painted in black as required as per drg No FD-220 and as directed

Removing existing unserviceable upper clamps for FMN set of Charpoy GI pipe and supply and fixing of new MS Upper Clamps for FMN set of Charpoy GI pipe duly painted in black where ever required as per drg complete all as specified and directed

Removing existing unserviceable lower clamps for FMN set of Charpoy GI pipe and supply and fixing of new MS Lower Clamps for FMN set of Charpoy GI pipe duly painted in black where ever required as per drg complete all as specified and directed

Replacement of unserviceable elbow 32mm GI elbow 3 way ISI marked where required complete all as specified and directed

Replacement of unserviceable check nut and supply and fixing of new check nut 32mm dia GI medium grade & 6mm thick where ever required as per drg complete all as specified and directed

Charpoy GI pipe with ply wood top (FD-220)

Removing of existing unserviceable ply wood from charpoy GI Pipe with ply wood top and S&F new 12 mm thick plywood BWR Phenol bounded commercial plywood ISI Mark All as per drg and directed. TS No. - 1- 485.00 TS No. - 3 - 350.00

Removing U/S old long rails and supply and fix new long rail made of 32mm dia medium grade GI pipe ISI mark duly threaded both end as required as per drg complete all as specified. TS No. - 1- 70.00 TS No. - 3 - 35.00

Conversion of old long rails into short rail obtained from item No 4.02 above by cutting/finishing to shape and both end threated and replacing the old U/S short rail where ever required against unserviceable part as per drg as specified. TS No. - 1- 140.00 TS No. - 3 - 70.00

Conversion of old short rail into legs obtained from item No 4.03 above duly threading and fixing including S&F of lower and upper clamps for FMN Set of Charpoy GI Pipe duly painted in black as required as per drg No FD-220 and as directed TS No. - 1- 280.00 TS No. - 3 - 140.00

Removing existing unserviceable upper clamps for FMN set of Charpoy GI pipe and supply and fixing of new MS Upper Clamps for FMN set of Charpoy GI pipe duly painted in black where ever required as per drg complete all as specified and directed.

Removing existing unserviceable lower clamps for FMN set of Charpoy GI pipe and supply and fixing of new MS Lower Clamps for FMN set of Charpoy GI pipe duly painted in black where ever required as per drg complete all as specified and directed.

Replacement of unserviceable elbow 32mm GI elbow 3 way ISI marked where required complete all as specified. TS No. - 1- 190.00 TS No. - 3 - 80.00

Replacement of unserviceable check nut and supply and fixing of new check nut 32mm dia GI medium grade & 6mm thick where ever required as per drg complete all as specified.

Removing U/S MS flat and S&F new MS Flat 35x5mm suitable length requried as per drg fixing with elect welding/nut bolts as required at centre of each long rail as per existing arragement. TS No. - 1- 120.00 TS No. - 3 - 40.00

Chair Verandah (FD-256)

Removing of old unserviceable Nylon /Cane plastic and recaning of Verandah Chair seat & back with 4.00mm wide and 0.4mm thick plastic cane half round superior quality white or cream colour as approved by Engr-in-Charge. Note :- Complete chair includes seat & back both and shall be measured as one unit.

M&L scrapping of surface of chair verandah frame with sand paper making smooth surface and applying one coat of white synthetic enameled paint all as directed.

Chair Writing (FD-280)

M&L Re-canning of Chair writing wooden with plastic cane of 1/2 round 2.0mm wide & 0.40mm thick closely woven with border round and back with 4mm wide of approved quality (white/cream) in colour including removing of old canning compete as as specified.

M&L preparation of wooden surfaces by cleaining scrapping smoothing of surfaces with sand paper and applying one coat of French polish on the wooden surfaces

Chair dining (FD-279)

M&L Re-canning of Chair dining wooden with plastic cane of 1/2 round 2.0mm wide & 0.40mm thick closely woven with border round and back with 4mm wide of approved quality (white/cream) in colour including removing of old canning compete as as specified.

M&L preparation of wooden surfaces by cleaining scrapping smoothing of surfaces with sand paper and applying one coat of French polish on the wooden surfaces of Chair dining as specified.

Chair Easy (FD-229)

M&L Re-canning of Chair easy wooden with plastic cane of 1/2 round 2.0mm wide & 0.40mm thick closely woven with border round and back with 4mm wide of approved quality (white/cream) in colour including removing of old canning compete as as specified. Note :- Complete chair includes seat & back both and shall be measured as one unit.

M&L preparation of wooden surfaces by cleaning scrapping smoothing of surfaces with sand paper and applying one coat of French poolish on the wooden surfaces of Chair easy wooden. Drg No FD-229

C.P.Computers

L.BHIMSEN

SK INDUSTRIES

KHAZAN SINGH SAWHNEY

AJAY TRADERS

M/S Shri Balaji Enterprises