CWE/CHM-59/2025-26 REPAIR AND MAINTENANCE TO JOINERY, SUNKEN REPAIR, PLASTERING TO CEILING and WALLS AND CONNECTED WORK IN OTM ACCOMODATION OF CERTAIN MINOR UNITS IN THE AOR OF AGE BR -III AT CHANDIMANDIR MIL STN UNDER GE CHANDIMANDIR

Amount

Taking down chowkhats or frame not exceeding 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frame exceeding 1.5 Sqm but not exceeding 4.00 sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified and as directed by Engineer-in-Charge.

Taking down shutter of any description exceeding 1.00 Sqm but not exceeding 2.00 Sqm each and removal from site complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

Note: (i) M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. (ii) For WPC solid door/ window frames, minus 5 mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fix Solid PVC Door Frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., Fe-290 (Gde E-165) complete, drilled for fixing of steel sheeting or other covering, Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed by Engineer-in-Charge.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-Charge.

S&F 30 mm thick (batten thickness), second class hard wood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chokhats complete all as specified and as directed by Engineer-in-Charge.

S&F 30 mm thick (batten thickness), second class hard wood, glazed and Skelton shutters, open rebated and prepared to receive glass, gauge, etc (without sash bars), divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded with cut mitred beds for securing glass etc, supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note :- The dimension of the various components or parts of shutters shall be as specified in clause 8.24 (a) of MES SSR 2009 Part I.

Supply and fixing Butt Hinges, 125 mm size, cold rolled, mild steel complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing powder coated aluminium sections as in frames/ shutter of doors/ window/ ventilators/ partitions (Sliding/ openable/ three track) including joining cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. complete all as specified and as directed by Engineer-in-Charge. Note : (i) Minimum thickness of power coating shall not be less than 50 micron. (ii) Weight of aluminum section only shall be measuerd and paid. (iii) Aluminum doors/ windows/ ventilators to be fixed to jambs with chromium plated screws. (iv) The rate shall be inclusive of neoprene beadings, snap beading, screws, locking, rolling in case of sliding shutters etc. Weight of fitting fixtures will not be measured for arriving the weight of aluminum section. (v) Glass/ wooden panel/ ACP sheet shall be measured and paid separately under respective items. (vi) Design as directed by engineer in charge.

Supply and fixing 5.00 mm thick tinted glass, ordinary quality, fixed to aluminum frame work in panels not exceeding 0.5 Sqm in each pane, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 5.00 mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels exceeding 0.5 Sqm in each pane, complete all as specified and as directed by Engineer-in-Charge.

Supply only 3 mm thick aluminium composite panel sheet (ACP) colour as approved by Engineer-in-Charge fixed to aluminium frame all as specified and directed.

Supply and fixing mortice lock, verticle type, mild steel, 4 levers, size 100 mm, brass body, complete all as specified and as directed by Engineer-in-Charge.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) with semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles of perforated perforated 12mm Size 595 mm x 595 mm of approved texture, 12 mm thick thick micro tegular design and patterns having moisture micro tegular edged or 10 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC 0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, on combustible as per BS tiles tiles 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 gram per sqm both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15 x 32 mm of length 1200 mm Contd....

Contd.. and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 mm x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85 mm x 25 mm x 2 mm. Galvanised iron perimeter wall angle of size 24 mm x 24 mm x 0.40 mm of length 3000 mm to be fixed on periphery with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge.

Supply and fixing Solid PVC Wall Lining, consisting of 5 mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing Complete all as spcified and as directed by Engineer-in-Charge

Supply and fixing 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing Complete all as spcified and as diercted by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

Material and labour for glazed, coloured, ceramic tiles in vertical surfaces 300 mm x 450 mm x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for non skid, first quality, coloured ceramic tiles, 7 to 8 mm thick (square/ rectangular), area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for coloured vitrified ceramic tiles, 8-10 mm thick (square/ rectangular), polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

All as per serial item No 22.00 here-in-before but as in skirting including necessary cutting as directed over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

M&L for Vitrified Ceramic tiles, light shade, 10 mm thick (square/ rectangular), polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge.

All as per serial item No 24.00 here-in-before but as in skirting including necessary cutting as directed over and including 10 mm thick rendering in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for machine cut, Kota Stone Slab, flooring, etc., 18-20 mm thick, best quality, (minimum size 55 cm x 55 cm) over and including cement screed bed 15 mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing with and including dismantling of existing stone complete all as specified and as directed by Engineer-in-Charge.

Material and labour 16 to 18mm thick granite stone slabs, width and length as per site requirement, best quality, machine cut and polished to be fixed in floors, cooking plateform, tread, riser of steps and vertical surfaces etc., and jointed with gray cement slurry and pointed in white cement mixed with marble dust (1:2) with admixture of pigment to match the shade of slab, rubbing, cutting/ rounding of outer edges and corners where directed with and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing damaged slab complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing factory made, rubber moulded machine pressed, coloured, chequered cement concrete tiles 250 mm x 250 mm x 22-25 mm thick, glossy finished (with grey cement and pigments), set, jointed and pointed in neat cement slurry with grey cement with pigment to match the colour of tiles, laid over and including 15 mm thick screed bed in cement mortar 1:6, including demolition of existing tiles complete all as specified and as directed by Engineer-in-Charge.

M&L for Machine pressed Precast coloured concrete paver block of 60 mm thickness, M-35 grade, with grey cement and pigment, glossy finish on top conforming to IS 15658-2006, with approved colour, design and pattern made by table vibratary method using PU mould, as in footpath, parks, lawns, drive ways or light traffic parking etc, laid over compacted bed of fine sand after compacting sand bedding layer through vibratory compaction by using plate vibarator, filling the joints with fine sand, finishing and sweeping extra sand including demolition of existing floor complete all as specified and directed by Engineer-in-Charge. Note: 1. The shape/ size of paver blocks shall be as approved by the GE. 2. sand cushioning will be measured and paid separately as supply only.

Supply Only Sand for filling under floors or in foundations complete all as specified and as directed by Engineer-in-Charge.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof), complete all as specified and as directed by Engineer-in-Charge.

Dismantling brick tiles or terracing tiles on roof any thickness jointed in any mortar (including cement mortar) and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

Material and labour for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregates) as in roof padding, roof kerbs rounded or chamfered on edges complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 20 mm thick rendering in Cement and Sand mortar 1:4 over roof slab and sunken portion finished even and fair mixed with water proofing compound, complete all as specified and as directed by Engineer-in-Charge. (NOTE: WPC will be measured and paid separately as supply Only)

Supply only integral water proofing compound, ISI Marked, complete all as specified and as directed.

S&F 3 mm thick Atactic polypropylene polymer (APP) based polymeric membrane, minimum weighing 3kg/sqm and reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) laid over a coat of oil bound bitumen primer @0.40 Lit/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/Lit at 25° C temperature and viscosity 70 to 160 CPS. The membrane shall be laid using butane torch and sealing all joints etc., having 75 mm side lap joint and 100 mm end lap joint after preparing the surface as per standard practice and as per manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge.

Roughening surfaces of old concrete floor by pricking, sweeping clean and washing down with water to remove dust etc. complete all as specified and as directed by Engineer-in-Charge.

Material and labour 40 mm thick brick tiles with including 20 mm thick cement mortar 1:4 jointed grouted and pointed complete mixed with crude oil 5% by weight of cement complete all as specified and as directed by Engineer-in-Charge.

All as per serial item No 38.00 here-in-before but except tiles.

Dismantling of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.

Material and labour for brick work with sub class ‘B’ bricks (old size bricks), straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

All as per serial item No 41.00 here-in-before but except bricks (using old serviceable bricks obtained from ser item No 40.00 here-in-above) complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Rendering 15 mm thick in cement mortar 1:4, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Rendering 15 mm thick in cement mortar 1:4, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement including taking down of existing plaster complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 10 mm thick rendering in Cement mortar 1:6, over brick or concrete surfaces, finished even and smooth without using extra cement including taking down of existing plaster complete all as specified and as directed by Engineer-in-Charge.

M&L for rendering 5 mm thick in cement mortar 1:3, on brick or concrete surfaces of ceiling, finished even and smooth without using extra cement including taking down old cement plaster complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint (approved colour), including necessary scafolding complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new plastered wall surfaces of any description and applying two coats of oil bound distemper over one coat of interior wall primer including wall care putty (average thickness 2 mm as required for desired smoothness and levelling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.

Demolition of plain cement concrete (un-reinforced) of any description and in any position complete all as specified and as directed by Engineer-in-Charge.

M&L 100 mm thick, PCC 1:4:8, type D- 2 (using 40 mm graded stone aggregates), as in sub base complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 15 mm bore GI tubing, medium grade with all fittings to walls, ceiling or laid under floors including taking down old tubing complete with fittings complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 20 mm bore GI tubing, medium grade with all fittings to walls, ceiling or laid under floors including taking down old tubing complete with fittings complete all as specified and as directed by Engineer-in-Charge.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth complete all as specified and as directed by Engineer-in-charge.

S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 500 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing water tank and removing from site complete all as specified and directed by Engineer-in-Charge.

S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 1000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing water tank and removing from site complete all as specified and directed by Engineer-in-Charge.

S&F Rotational moulded PVC, Triple layered, water storage tanks of capacity 2000 litre (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe including dismantling existing water tank and removing from site complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous China wash down water closet pan (pedestal pattern), 'P' or 'S' trap, white (excluding flushing cistern) including seat cover & flush pipe complete with all connections fixed as in repair complete all as specified and directed by Engineer-in-Charge.

Supply and fixing vitreous china squatting pan, “Orissa” pattern of size 580 mm x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and flushing pipe complete including trap, set with cement fixed in repair complete all as specified and directed by Engineer-in-Charge.

S&F in repair PVC valveless, syphonic action type flushing cistern of 10 litre capacity, low level, white with inlet ball valve, float and handle including bracktes complete all as specified and as directed by Engineer-in-Charge.

Material & labour for solid PVC board,16 to 18 mm thick, interior grade, any colour, as ordered, fixed with screws as in almirah shelves, kitchen cupboard, cabinet including dismantling old existing board complete all as specified and as directed by Engineer-in-Charge.

M&L for Factory made single extruded WPC (Wood Polymer Composite), solid, plain flush door shutter of 30 mm thickness comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawl strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary S S screws shall be paid separately.

Supply and fixing 3 mm thick sheet glass, ordinary quality, size in squares/ rectangles not exceeding 0.50 sqm in each pane and fixed in any type of frame and glazing with oil putty (or beading) including hacking out old broken glass complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing 4 mm thick sheet glass, ordinary quality, size in squares/ rectangles exceeding 0.50 sqm in each pane and fixed in any type of frame and glazing with oil putty (or beading) including hacking out old broken glass complete all as specified and as directed by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire stapless complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing mild steel sliding door bolt, 250 mm long, clip and bolt type, stove enamelled, black, with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate including necessary welding, complete all as specified and as directed by Engineer-in-Charge.

S&F Sliding door bolt, 250 mm size, Aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china wash basin, white, flat back, of size 550 x 400 mm, excluding taps, waste, chain plug and porcelain stopper, including waste pipe, brass waste coupling and brackets including cutting and pinning in ends of bracket or erecting stand complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair vitreous China Urinal, half stall type, fixed against wall in cement morter (1:2), securing urinal with and including 60 mm long brass screws, pointing around urinal back in cement, including brass CP waste coupling 32mm size, PVC waste pipe, complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing PVC (SWR) rain water pipe, 110 mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25 mm x 3 mm including nuts bolts etc., including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed by Engineer-in-charge.

Supply and fixing 110 mm bore PVC (SWR) bends, any radius, complete all as specified and as directed by Engineer-in-Charge.

S&F for 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) bends, any radius, 110 mm dia with oval acess door, complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) gully trap 75/ 110 mm, setting and jointing with solvent cement, complete all as specified and directed by Engineer-in-charge.

PVC SWR 'P' trap including jointing with solvent cement, of size 110 mm dia, complete all as specified and directed by Engineer-in-charge.

S&F in repair door closer (Aluminium extruded section) hydraulically regulated, designation No. 3 universial type suitable for door shutter of 701 to 850 mm in widtth and of weight between 36 to 60 kg complete all as specified and directed by Engineer-in-charge.

S&F in repair double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engineer-in-charge.

Supply and fixing powder coated aluminium powder coated handles, 'D' type, 125 mm size, fixed to aluminium doors with screws complete all as specified and directed by Engineer-in-charge.

Supply and fixing butt hinges, 100 mm size, made out of extruded aluminum alloy with galvanised mild steel hinge pin, anodised, type C-21, complete all as specified and directed by Engineer-in-charge.

Supply and fixing bib taps, cast copper alloy, chromium plated, with wall flange, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete, suitable for 15 mm bore pipe, fixed in repairs complete all as specified and directed by Engineer-in-charge.

Supply and fixing pillar tap, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, suitable for 15 mm bore pipe, fixed in repair, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair, brass, Chromium Plated mixer for mixing hot & cold water, screwed down for iron pipe and fixed, suitable for 15 mm bore pipe, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 200 mm aluminum anodized barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 150 mm aluminum anodized barrel tower bolts of extruded section, complete all as specified and directed by Engineer-in-charge.

Supply and fixing Aluminium handles, cast type, anodized, of size 150 mm, ISI marked, complete all as specified and directed by Engineer-in-charge.

Supply & fixing Brass, Chromium Plated, shower rose, 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union fixed as in repair complete all as specified and directed by Engineer-in-charge.

M&L for Running welding in repairs, thickness of metal to be welded not exceeding 6 mm including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required, complete all as specified and directed by Engineer-in-charge.

M&L for Welding in repairs exceeding 2.5 cm but not exceeding 5 cm in length and thickness of metal to be welded exceeding 6 mm but not exceeding 9 mm including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required, complete all as specified and directed by Engineer-in-charge.

Material and labour for complete removal of existing treatment on old decorated surfaces of any descripion and applying wall care putty in of average thickness 2 mm in two or more layers for desired smoothness and leveling of surfaces by using sand papering to make surface smooth and ready to receive interior finish and applying two coats of oil bound distemper over one coat of interior wall primer (all as per manufactur's instructions) complete all as specified and directed by Engineer-in-charge.

Material and labour preparation of old decorated surfaces of walls and applying two coats of cement base paint on external wall surfaces of height upto four storey building including necessary scaffolding and safety arrangements including complete removal of existing treatment complete all as specified and directed by Engineer-in-charge.

Supply and laying H.D.P.E Double wall corrugated (DWC) pipes, ISI Marked, 150 mm Bore, SN-8 Class as per IS 16098 Part-II for non-pressure underground drainage and sewage applications with specials including cost of special O rubber ring couplers etc., laid in trenches on concrete bed to level/ gradient, jointing with appropriate class fittings as per manufacturer's instructions including jointing accessories and fittings complete all as specified and as directed by Engineer-in-Charge.

M&L for Concrete bed to drain pipes, 150 mm Bore, including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement concrete 1:3:6 type C-2, including demolition of existing pipe complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated surfaces of wall and Distempering with two or more coats (smart periodical) of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed by Engineer-in-Charge.

M&L for complete removal of existing treatment from walls and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), (smart periodical) complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer-in-charge.

Supply and fixing High density polyethylene (HDPE) of pressure rating 6 kgf/cm2 ) Junction, single T, equal or unequal for 100 mm bore pipe, fixed as in repair complete all as specified and as directed by Engineer-in-charge.

S&F for stack clamps for 75mm bore pipe, made out of 30 mm x 5 mm size, flat iron, round stays, including screws/ nails and securing ends of stays to wall or roof, fixed as in repair complete all as specified and as directed by Engineer-in-charge.

All as per serial item No 98.00 here-in-before but for 100 mm bore pipes.

M&L for Cleaning & clearing of blockage from any type of WCs (Indian/ European), trap & CI pipe line upto 1st manhole, manually by rodding, pumping etc., (including taking off manhole covers and re-fixing the same after cleaning) of any description, underground and at any depth by removing any type of blockage including de-silting and de-chocking (Sludge/ sludge water shall be disposed off at authorized dumping site declared by local administration outside MD land complete all as specified and as directed by the Engineer-in–charge.

All as per serial item no 100.00 here-in-before but from Floor/ Nahani trap of Kitchen/ Bathroom upto Gully trap (excluding Gully trap)

All as per serial item no 100.00 here-in-before but from Gully trap upto first manhole.

Note for serial item no. 100.00 to 102.00: (i) Rate quoted in the above items includes cost of T&P like rods, bamboos and other safety devices etc. complete. (ii) Contractor shall deploy sufficient no of persons as per requirement. (iii) Complaint shall be rectified within same day on receipt of complaint. A penality of Rs. 250/- per complaint per day will be levied to contractor if the complaint is not cleared with 24 hrs.

Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in–charge.

Material and labour preparation of old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in–charge.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engineer-in-Charge.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in foundation for fencing posts etc., complete all as specified and as directed by the Engineer-in-Charge.

M&L for Mild steel Works as in post or struts in fencing, including cutting tops to shape as directed and drilling holes, notching for wire, etc. inluding flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed by Engineer-in-Charge.

M&L for preperation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 2 mm thick fibre glass reinforced translucent corrugated/ plain sheeting fixed with coach screws and washers in roof, wall etc, including dismantling of existing sheet complete all as specified and as directed by Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.

Dismantling Asbestos Cement (Corrugated, Semi corrugated etc.) sheets in roof coverings of any discription complete all as specified and directed by Engineer-in-charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa, fixed with self tapping screws as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) complete all as specified and directed by Engineer-in-charge.

Demolition of un-reinforced cement concrete exceeding 15 cm thick on any description and in any position not otherwise specially provided for and removing all demolished material/ debris to 1.50 Km from the sie and depositing where directed complete all as specified and directed by Engineer-in-charge.

M&L for Plain cement concrete 1:5:10, type E-2 (usinge 40 mm graded brick aggregate) as in sunken filling and mass concrete complete all as specified and directed by Engineer-in-charge.

M&L for water proofing treatment to SUNKEN PORTION and adjoining walls of kitchen, WC, Bath & Toilet etc., complete all as specified as under:- (a) 15 mm plaster in cement mortar (1:3) after roughning and cleaning the surface mixed with WP compound as per manufacturer’s instructions. (b) Curing the sunken portion with water minimum for 48 Hrs by ponding. (c) Paste one layer of 3 mm thick APP membranne with bitumen by torch application to the treated sunken surface over a coat of primer as per manufacturers instructions. (d) Joints/ Traps/ WC/ soil pipes shall be properly sealed with approved sealing compound of make mentioned as specified. (e) Supply and fixing of 40mm dia spout pipe.

Excavation in trenches in hard/ dense soil not exceeding 1.50 metre wide, not exceeding 1.5 in depth, for foundation etc., or for shafts, wells, cesspits, manholes, pier holes, etc. and getting out complete all as specified and as directed by Engineer-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each complete all as specified and as directed by Engineer-in-charge.

Removing excavated spoil to a distance exceeding 250 metre and not exceeding 500 metre and depositing where directed complete all as specified and as directed by Engineer-in-charge.

Material and labour for Rendering 15 mm thick in cement mortar 1:6, on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

M&L for Factory Made, Solid PVC Moulded Door Shutter with particle board core, 28 to 30 mm thick (stiles) with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed by Engineer-in-charge.

Gunjan and Gunjan Associates (BID ID -3391535)

MS R G ENTERPRISES (BID ID -3390916)