WELCOME MAINTENANCE TO CERTAIN MD ACCN AREA UNDER AGE BR I CHANDIPUR AND REPAIR REPLACEMENT OF CERTAIN INTERNAL WIRING LIGHT FITTINGS CEILING EXHAUST FAN DB MCB UNDER WELCOME MAINTENANCE AT MD ACCN AT PXE UNDER AGE EM CHANDIPUR

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. SCHEDULE 'A' PART-I (B/R PORTION)

M & L for preparation of old decorated surfaces of walls plastered or unplastered incl removing cornices, pilasters by brooming down to remove all dust, dirt and all loose scales and other foreign matter and smoke soot, moulds, moss and efflorescent salt, oil & grease spots by steel wire brushes or steel scrapers, etc and applying one coat of white wash to walls to obtain uniform surface including making good the surface complete all as specified and directed.

All as per Sl Item No. 1.001 above but on ceilings complete all as specified and directed.

All as per Sl Item No. 1.001 above but one coat of distemper oil emulsion on walls complete all as specified and directed.

All as per Sl Item No. 1.001 above but one coat of distemper oil emulsion on ceiling complete all as specified and directed.

M & L for preparation of old decorated plastered / unplastered surfaces of walls and applying two coats of distemper oil emulsion completet all as specified.

M & L for complete removal of existing treatment of walls plastered or unplastered, Washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer including making good the surface complete all as specified and directed.

M & L for complete removal of existing treatment of ceiling plastered or unplastered, Washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer including making good the surface complete all as specified and directed.

Preparation of old surfaces of wood and wood based surfaces and applying one coat of synthetic enamel paint of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Preparation of old painted surfaces of steel and applying one coat of synthetic enamel paint to steel surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for 10 mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth without using extra cement on wall complete all as specified and directed.

M & L for 5 mm thick in CM 1:3 rendering on ceiling surfaces finished even and smooth without using extra cement on ceilings complete all as specified and directed.

M & L for preperation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

All as per Sl Item No. 1.013 above but on walls.

M & L for prepartion of newly plastered surfaces and priming plastered surfaces with alkali resistant primer and applying two coats of oil bound distemper on walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

M & L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and directed.

M & L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in floor finishes to receive tiles.

M & L for 10 mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados complete.

M & L for Vitrified Ceramic tiles light shed 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per Sl Item No. 1.020 above but as in vertical surfaces such as skirtings, dado, etc.

M & L for joint free Non - skid Ceramic white tiles 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

All as per Sl Item No. 1.022 above but as in vertical surfaces such as skirtings, dado, etc.

M & L joint free glazed ceramic coloured tiles as in vertical surfaces 450 mm x 300 mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles.

M & L for Non Skid coloured ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm ( 300 x 300 mm ) in floors etc set & jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frame) area not exceeding 1.5 Sqm each complete all as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frame) area exceeding 1.5 Sqm and not exc 4 Sqm each complete all as directed.

Taking down shutters of any description area not exceeding 1 Sqm each each all as directed.

Taking down shutters of any description area exceeding 1 Sqm and not exc 2 Sqm each each all as directed.

M & L 2nd class Hard Wood plain, solid, straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as directed.

M & L for Preparing of surfaces of backs of chowkats, etc., area tarred exc 0.1 sq. m but n exc 0.5 sq. m eac treated with tar or coal tar black paint complete all as specified and directed.

Cutting holes for inserting hold fasts in Brick walls built in cement mortar and making good disturbed portion in PCC (1: 2 :4) type B1 or in cement mortar (1:3) as required, depth of embedded portion exceeding half brick but not exceeding one brick for full brick walls, complete all as specified and as directed.

S & F of Mild steel work as in bands, straps, supports or stays for RWP, ventilating pipes, clamps, hold fasts, wall ties conforming to Fe-290 Gde E-165

S&F 30 mm thick 2nd class hard wood glazed, gauged, skeleton shutter, as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats open rebated and prepare to receive glass, gauge etc divided into squares edges of framing, plain, chamfered or rounded, mitred and rebated sash bars any numbers prepared to receive glass/ gauge and all as specified.

M & L for 30 mm thick glazed and skeleton shutters made of 2nd class hard wood, open rebated and prepared to receive glass gauge edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F 35 mm thick plain framed panelled shutters (any number of panels), with panels of timber flat on both side (feather edged) or veneered particle board, medium density, wood particle board with commercial face veneers complete all as directed.

S & F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded both side Prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of both sidePrelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement.

S & F of solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube, suppling and fixing in opening complete.

S & F 100 mm size of Stainless Steel hinges complete all as specified and directed. (ISI Marked)

S & F Butt hinges medium weight, cold rolled mild steel of size 100 mm complete all as specified and directed.

S & F Butt hinges medium weight, cold rolled mild steel of size 75 mm complete all as specified and directed.

S & F 250 mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as specified and directed.

S & F 100 mm long extruded Aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 100 mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.

S & F 150 mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed.

Taking down and refixing shutter after repair of any description n. exc 1 Sqm each in same opening complete all as specified and as directed.

Taking down and refixing shutter after repair of any description exc 1 Sqm but n. exc 2 Sqm each in same opening complete all as specified and as directed.

S & F in repairs for butt hinges medium weight cold rolled mild steel of 100 mm size. complete all as specified and directed .

S & F in repairs for butt hinges medium weight cold rolled mild steel of 75 mm size. complete all as specified and directed .

S & F in repairs for 150 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F in repairs for 100 mm extruded Aluminium aloy handles, febricated type anodised complete all as specified and directed .

S & F in repairs for 150 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F in repairs for 100 mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed .

S & F in repairs for 250 mm Sliding door bolt aluminium alloy, anodised, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S & F for 150 mm long aluminium plate type II hook & eye for window shutter complete all as specified and as directed.

S & F in repairs 150 mm long aluminium plate type II hook & eye for window shutter complete all as specified and as directed.

S & F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S & F in repairs for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S & F sheet glass 3.00 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F sheet glass 3.00 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each as in repair

All as per Sl Item No. 1.062 above but 3.00 mm thick figured glass.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed.

S & F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed.

M & L for preparation of new or previously untreated surface of wood of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamelled paint over one coat of pink primer complete all as specified and directed

Dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.

S & F 19 mm Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screw to timber frame work including second class hardwood beading all around complete all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length 150 mm fixed in floor complete all as specified and as directed .

S&F 100mm long Hasp and Staple, Safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws.

S & F for 300 mm, ordinary rat tail rod pattern Helical door springs including roller and roller plate complete all as specified and directed.

S & F stainless steel fancy type curtain rod of outer dia 25 mm with bracket and all accessories (Note : Necessary Bracket including in this items in every curtain rod to be fitted)

S & F Brass CP mixer of 15 mm dia for mixing hot & cold water screwed down for iron pipe and fixed in repair

S&F in repairs Stop valves fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed to 15 mm bore pipe complete.

S&F in repairs Bib taps, fancy type, chromium plated, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed to 15 mm bore pipe complete.

S&F in repairs Pillar tap cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down, high pressure with or without letter 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for fixing to 15 mm bore pipe complete.

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for 15 mm bore dia iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete.

S & F in repairs Vitreous china wash down water closet pan (pedestal pattern) including 'P' or 'S' Trap with necessary, fixing arrangement including plastic water closet seat cover white with recessed bottom and cover fixed with aluminium hinging device complete all as specified and directed.

M & L for PVC valve less syphonic action type flushing cistern 10 ltr capacity low level white with inlet ball valve, float flush pipe and handle including bracket ( Hindware/Parryware) fixed.

Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm as in repair

S & F in repair Vitreous china wash basin with pedestal, white, flat back, size 550 x 400 mm excluding taps, waste pipe, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets complete all as specified and directed.

S & F in repairs stainless steel sink, 1.00 mm thick for kitchen with plug, waste pipe, washer including cantilever cast iron bracket, connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floors, approons etc

M & L granite slab (of any type) 20 (+/-2)mm thick machine cut bedded and jointed with greay cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including cutting and polishing complete as in cooking platform.

S&F glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long in repairs.

S&F in repair shower rose fancy type chromium plated 120 mm (minimum) size with swivel joints suitable for 15 mm bore pipe including shower arm chromium plated 15 mm dia, 190 mm (minimum) long with bend of 45 degree complete all as specified and directed.

S&F in repairs grating doom 100 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and as directed.

S&F Plastic water closet seat cover soft closed white with bottom and cover fixed with aluminium hinging device in repair.

S & F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

S & F of CPVC pipes of 20 mm dia with SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified. complete all as specified and directed.

Cutting chases not exc 10 cm but n.exc 20cm girth for concealed water tubing and making good to facings where required and pointing in cement mortar 1:3 .

S & F of CPVC pipes of 25 mm dia with SDR 13.5 pipes & plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete all as specified. complete all as specified and directed.

Fixing only, ‘Medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15mm bore complete all as specified and directed.

Fixing only, ‘Medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20mm bore complete all as specified and directed.

S & F for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints, necessary clamps fixed to walls including taking down complete all as specified and directed.

S & F for PVC (SWR) 110 mm bends complete all as specified and directed.

M & L for providing and applying wall care putty of 0.50 to 1 mm thickness over plastered surface of wall to prepare the surface even and smooth.

S & F 75 mm dia PVC (SWR & RWP) floor trap plain with grating inclu. jointing with solvent cement of out let dia.

S & F 75 mm dia PVC (SWR & RWP) pipes single socketed in any length with rubber ring joints fixed to wall.

S & F for PVC (SWR) 75 mm bends complete all as specified and directed.

SCHEDULE 'A' PART-II (ELECTRIFICATION)

Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed .

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for for one 5/6 amps socket outlet on same board controlled with other switch complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on independent board controlled with one, oneway switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 4 Sqmm (phase & neutral) and one run of 4 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 15/16 amps socket outlet on independent board controlled with one, 15/16 amps one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (heavy duty) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 2.5 Sqmm (phase & neutral) and one run of 2.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (heavy duty) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on independent board controlled with one, oneway switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (heavy duty) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on same board controlled with other switch complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 2.5 Sqmm (phase & neutral) and one run of 2.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (heavy duty) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 6/16 amps socket outlet on independent board controlled with one, 16 amps one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement.

M&L Sub main wiring using two runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 4.0 Sqmm and one run of 4.0 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size including taking down old submain wiring with fittings & fixtures and all as specified. Note : Two runs of 4.0 Sqmm copper wire,one run of 4.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.

M&L Sub main wiring using two runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 6.0 Sqmm and one run of 6.0 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 25 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size including taking down old submain wiring with fittings & fixtures and all as specified. Note : Two runs of 6.0 Sqmm copper wire,one run of 6.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.

M&L Sub main wiring using four runs of FRLSH grade PVC insulated ,unsheathed ,stranded, copper conductor cable of size 6.0 Sqmm and two run of 6.0 Sqmm grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including 32 mm size PVC Conduit (medium grade) in Concealed wiring of suitable size including taking down old submain wiring with fittings & fixtures and all as specified. Note : Four runs of 6.0 Sqmm copper wire, two runs of 6.0 Sqmm wire & one run PVC Conduit shall be measured as one unit.

Supply and fixing including connection of call bell AC 230 Volt single pole.

Supply and fixing including connection of bell push switch,flush type 5 Amps, 230 volts.

S & F in repair Including connection of switch piano, flush button, type single pole one way 5 Amps,

S & F in repair Including connection of switch socket combination 5 Amps 2 in 1 flush type,

S & F in repair Including connection of switch socket combination 5 in 1, 3 pin, 5 and 16 Amps flush type

S & F in repair ceiling rose, polycarbonate three terminals.

M & L for lamp holder PVC/polycarbonate type with back plate including 9 watt LED lamp suitable for batten fitting.

S & F Electronic fan regulator, stepped type 120/280V complete all as directed.

Supply and fix in repair Vertical TPN MCCB DB 8 way with 200 Amps rated busbar, double door type including provision for fixing MCCB 4 pole 100 Amps, 25 KA complete including taking down old DB and making disturbed surafce good to match the existing surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

S & F in repair MCB DB made of sheet steel phosphatised powder coated with bus bar, neutral link, earth bar and din rail, double door type, TPN 4 way 240v, fixed in wall including making good disturbed surfaces including taking down old unserviceable , complete all as directed.

All as per Sl Item No. 2.023 here-in-before but of SPN 8 way,240Volts double door as in repair.

All as per Sl Item No. 2.023 here-in-before but of SPN 12 way,240Volts double door as in repair.

S & F in repair MCCB 4 pole, with fixed thermal & magnetic release of breaking capacity 16 kA, 415 Volts, 100 Amps including taking down old unserviceable one.

All as per Sl Item No. 2.026 above but of capacity 63 Amps, 4 Pole, 16 KA.

S & F in repair MCB, SPN. 40-63 Amps rating 240, volt, 'C' series, 10 kA,

S & F in repair , MCB, TPN, 415 V, 50Hz, 10kA, 'C' series, 63 Amps series.

S & F in repair , MCB, TP, 415 V, 50Hz, 10kA, 'C' series, 25 to 63 Amps series.

S & F in repair MCB, SP, 6 to 32 Amps, 240 volt, 'B' Series, 10 kA, as in repairs.

Supply and fix in repair LED retrofit tube complete with powder coated decorative LED T-8 Batten with polycarbonate tube of capacity 20 Watt complete with including PVC insulated flexible copper wire of size .5 sqmm 2 core from ceiling rose to fitting complete incl taking down old fitting all as specified and directed.

Supply and fix in repair retrofit LED tube rod only of capacity 20 Watt.

Supply and fix in repair LED retrofit tube complete with powder coated decorative LED Batten with polycarbonate tube of capacity 10 Watt, 2' all as specified and directed.

Supply & fix LED luminaire 600 mm x 600mm 35/36 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver holder & LED lamp suitable for roof ceiling including connection up with driver three core flexible copper conductor case of suitable size complete. all as specified and directed.

S & F in repair Sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP of 20 Amps .

M&L Earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm buried directly in ground connected to galvanized earth lead strip of size 25 mm x 4 mm by means of bolts, nuts, check nuts and washers of galvanized iron including 40mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe light grade 20mm dia, charcoal or coke and common salt in alternative layers of 15 cm compacted thickness all around the electrode with concrete earth pit with PCC type C1 , 1:3:6 (using 20 mm graded stone aggregate), 50mm thick precast RCC type B1, (1:2:4)(using 20 mm graded stone aggregate) pit cover reinforced with 8mm dia deformed bar and suitable handle made of 10mm dia round bar including galvanised strip of size 25mm x 4mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No.3 of SSR Part-I, 2009 and all as directed including taking down old unserviceable one. (Note : GI strip upto 7.5 m length shall be deemed to include in the cost of above item.

S & F in repair Earthing conductor with GI strip of size (25 x 4) mm complete all as directed.

Disconnecting electrically and dismantling of ceiling fans of any make capacity and type, washing thoroughly of bearing /bush, fan blades and body of fan by kerosene /petrol etc and greasing for smooth functioning. Replacement of worn out/defective unserviceable parts (where ever necessary), reassembling the same including provision of three core flexible copper wire 1.5m long, including one coat of synthetic enamel paint (first quality) with super glossy finish to fan body and blades refixing the same to its original position including testing complete all as directed by Engineer-in-Charge. (NOTE : Replacement of worn out/ defective/unserviceable parts, flexible copper wire and rewinding shall be measured and paid separately under relevant items of these schedule).

All as per Sl Item No. 2.039 here-in-before but for Exhaust fans of any size and make.

M&L Rewinding the motor of AC ceiling fan of any make and size (1200/1400mm) with super enamelled copper wire of adequate size/gauge including all insulation materials, varnishing etc complete all as directed.

All as per item No.40 here-in-before but for exhaust fans of 300/380mm sweep of any make.

Supply only Ball bearing of suitable size for any type/make of ceiling fan, Make : TATA/NBC/SKF.

All as per Sl Item No. 2.043 here-in-before but for Exhaust fans of any type/size/make.

Supply only capacitor 220 volts, 2.5 mfd suitable for ceiling fan, Make : SARADA/ TIBOCON/ UNIVERSAL.

Supply only capacitor 220 volts,4 mfd suitable for ceiling fan, Make : SARADA/ TIBOCON/ UNIVERSAL.

S & F in repair Hanging clamp for ceiling fan of adequate size including rubber reel, nuts, bolts and washers etc complete including taking down old unserviceable one, all as directed.

Taking down of unserviceable single phase 240 volts electric energy meter of existing capapcity and replacement of unserviceable parts and wirie as required for proper functioning of meter & refixing at same location with all fixing arrangement all as specified.

RANA ENTERPRISES

Rekha Enterprises

ELECTRO COMMERCIAL CO

DS ENTERPRISES

Rounaq Enterprise

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION

jlenterprise

Bidder Name

RANA ENTERPRISES

DS ENTERPRISES

Rounaq Enterprise

J B NATH AND SON

Rekha Enterprises

ELECTRO COMMERCIAL CO

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION

jlenterprise