EE/DB/D8/99512/2022

Amount

CIVIL WORK

Dismantling the Chipping of concrete & roughening the surface etc., complete complying with standard specification as directed by Corporation officers.

Thorough scrapping of old plastered surface, etc., complete as per standard specification and as directed by the deparmental officers.

Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly etc. complete complying with standard specification and as directed by the departmental officers.above basement

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets etc complete.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire etc.,complete .

Plastering in Cement Mortor 1:5 Mix (one Cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming etc complete.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 etc. complete complying with standard specification and as directed by the departmental officers.

Painting new iron works with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc., complete as per standard specification.

Supplying Pin Headed / Fluted / Figured Glass 3mm thick etc., complete as directed by the departmental officers.

Design, Supplying Fabricating and erection of TCT colour coated Galvalume sheets Including Cost of sheet, Conveniance charges, Scaffloding charges and Fixing with necessary screw etc., complete as directed by the departmental officers.

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames .

HAYAGRIVAR KNOWLEDGE AND TECHNOLOGIES