SPECIAL REPAIR TO BLDG NO 220 AT ITR COLONY BALASORE AND CERTAIN REVENUE WORK AT BALASORE

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. SCHEDULE 'A' PART-I (B/R PORTION)

Dismantling of brick work or stone/boulder masonry, built in cement mortar complete all as directed by Engineer-in-Charge

M & l for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified or directed by Engr-In-Charge.

M & L for Cutting chases, pinning in, making good to facings in brick work where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth

M & L for broken stone or boulder Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

Taking down cement plaster on brick or stone wall etc including ranking out joints hacking for keys scrubbing down with water etc complete all as directed by Engineer-In-charge.

M/L for rendering 10mm thick in cement mortar 1:6 and 2nd coat of 5mm thick in cement mortar 1:4 with water proofing compound on external wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M/L for rendering 10mm thick in cement mortar 1:6 on internal wall brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in - Charge

M & L for Rendering 15 mm thick cement plaster on internal surfaces of brick work in CM 1:6 and surface to be finished even & smooth without using extra cement complete all as specified and directed.

M/L for rendering 5mm thick in cement mortar 1:3 on Ceiling brick / concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed by Engr-in - Charge

M & L for Rendering 5 mm thick cement plaster in CM 1:3 on fair faces ceiling , Chajja, shelves and surface to be even and fair complete all as specified and directed.

M & L for Preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for Preparation of newly plaster surface of wall and rubbing with sand paper finish smooth and applying two coats acrylic distemper (oil bound distemper) over a coat of alkali resistant primer paint including preparation of surfaces complete all as specified and directed.

Complete removal for Preparation of old surface of walll and applying two coats acrylic distemper (oil bound distemper) incl preparation of surfaces complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying Premium Acrylic smooth exterior paint with silicone additives of required shade new work (Two or more coats applied @1.43 ltr/10 sqm over new surfaces incl priming coat of exterior primer applied @2.20 kg/10 sqm over new surfaces .complete all as Manufacturer instruction and as directed.

Preparation of old decorated surface by complete removal of existing treatment of wall by washing rubbing down and stopping of old surface andapplying Premium Acrylic smooth exterior paint with silicone additives of required shade new work (Two or more coats applied @1.43 ltr/10 sqm over new surfaces incl priming coat of exterior primer applied @2.20 kg/10 sqm over new surfaces .complete all as Manufacturer instruction and as directed.

M & L for Preparation of new plastered surface of wall make the surface smooth by using 1-1.5 mm thick wall care putty and applying two coat of plastic emulsion paint over a coat of acrylic primer complete all as manufacturer instruction and as directed by Engr-In-Charge.

M & L for Preparation of new plastered surface of Ceiling make the surface smooth by using 1-1.5 mm thick wall care putty and applying two coats of plastic emulsion paint over a coat of acrylic primer complete all as manufacturer instruction and as directed by Engr-In-Charge.

Preparation of old decorated surface by complete removal of existing treatment of wall by washing rubbing down and stopping of old surface and make the surface smooth by using 1 to 1.5 mm thick wall care putty and applying two coat of plastic emulsion paint over a coat of acrylic primer complete all as manufacturer instruction and as directed by Engr-In-Charge.

M & L for Preparation of old decorated surface of Ceiling by complete removal of existing treatment by washing rubbing down and stopping of old surface and make the surface smooth by applying a coat of 1 to 1.5 mm thick wall care putty and applying two coat of plastic emulsion paint over a coat of acrylic primer complete all as manufacturer instruction and as directed by Engr-In-Charge

M&L for preparation of old painted surface of wood and wood based surface by knotting, stopping etc of any description exc 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surfaces width or girth exc 10cm including preperation of surfaces

Material and labour for one coat of synthetic enamel paint on old steel surfaces of any description, not otherwise described over 10cm width or girth after preparation complete all as specified and directed by Engr in Charge.

M&L for applying two coat of synthetic enamel paint on new steel surface over a coat of red oxide incl preparation of surface of any description over 10 cm width or girth.

Dismantling of ceiling boards (fibre, Pulp, Insulation) of any thickness, including cover fillets

S & F false ceiling grid usingAnodised aluminium snap grid frame work for false ceiling all incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified as specified including 4mm thk Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screwl and prepare the surface by applying 3mm thick wall care Putty and apply two coat of plastic emultion paint over a coat of primer complete all as specified and as directed by Engineer-In-Charge.

M&L for proving and fixing stainless steel (grade 304) railing made of hollow tubes,channels ,plates etc incl welding grinding, buffing, polishingand making curvature (whereever required ) and fxing the same with neessary stainless stell nuts and bolts complete ,incl fixing the railing with necessary accesories& stainless steel dash fasterners,stainless steel boltsetc. of required size,on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed .

M & L for Priming surfaces and applying heavy treatment with APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. all as specified and directed by Engr-in-Charge.

M&L for padding concrete 25mm thick, Type B-0, 1:2:4 (using 12.5mm graded stone aggregate) complete all as specified.

M&L 40 mm thick PCC 1:2:4 type B-1 ( Using 20 mm graded aggregates), in floor and steps, landing etc

Dismantling of floor hearth or wall tilling including cement mortor bedding and removing rubbish off the premises all as specified and directed by Engr-in-Charge

M & L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes etc in cement mortar 1:6 complete all as sdpecified and as directed.

M & L for rendering to brick/ concrete surface 10mm thick in cement mortar 1:4 surfaces finished fair and even and scoured for fixing tiles/ stone slabs etc complete all as specified and as directed

M&L for vertified ceramic tiles 10mm thick light shade (Square/rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M/L for non skid ceramic coloured tiles 300x300x7mm thick in floors, etc. set and jointed in neat cement slurry and pointed in cement to match.(size of tile,as directed by Engr-in-charge)

M & L for Non - skid joint free Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,(400x400mm) in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as directed by Engr-in-chage.

M&L Glazed ceramic coloured tiles 450 x 350X7 mm thick coloured tiles as in dado, skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles.

M&L for heavy duty pre-polished pavement tiles of size 300 mm x 300 mm x 8-10 mm thick as in footpath/ hardstanding over and includung filling joint with white/ coloured cement to match complete all as specified & directed.

M & L 20mm thick Granite (BLACK JET) work (table rubbed and polished) in steps thread, riser, pillars, window-cills, cooking platforms, wash basin counter and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including making the tread of step full bullnosing complete all as directed by Engr-In-Charge.

Demolition of Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition)

M & L Reinforced cement concrete ( Nominal mix) in type B1 1:2:4( 20 mm graded aggregate) Chajjas and the like

M & L PCC type C1 (1:3:6, using 20 mm graded stone aggregate) for fixing of hold fast.

M & L for form work to sides and soffits of floor or beams etc complete all as specified and as directed

M & L for mild steel TMT bars (Fe 500D) 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column hooking end complete all as specified

M & L for mild steel TMT bars (Fe 500D) 6mm to 8mm dia, cut to length bent to shape required including cranking bending spirally for hooping for column hooking end complete all as specified

S&F MS hold fast made out of 25x 3mm flat iron dully cutting/barding of required size.

M & L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet, Coated thickness of 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified Pre-painted galvalume complete all as directed.

S&F for Galvanised Iron, roof trusses (framed), trussed, purlins, rafters, plates, cleats and fastenings and heavy bracket framing (beam, tee, angle channel or flat sections) of Fe-410 -W(Gde E-250) quality-B etc complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance not exceeding 1.50 KM complete all as specified and as dierected by Engineer-In-Charge.

M&L Plain Cement Concrete 40mm thick type B1 (1:2:4 using 20mm graded granite stone aggregate) as in floors finished even and smooth using extra cement complete as specified.

M&L for plain cement concrete 75mm thick type C-1 1:3:6 (using 20mm graded stone aggregae as in path,plinth protection or hardstanding complete all as specified.

Material and labour for 30mm thick PCC 1:2:4, type B-0, using 12.5mm graded aggregate as in flooring complete all as specified and as directed.

Supply only liquid water proofing compound (ISI marked) of approved make.

Taking down chowkat with shutters (without taking off shutters from the frames) of any description exc 1.5 sqm and not exc 4.0 sqm in each panel .

Taking down chowkat with shutters (without taking off shutters from the frames) of any description n exc 1.5 sqm in each panel .

S/F Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with ms square tube, in opening as per specification and drawing incl making good the disturbed surface to match the existing for toilet.

S & F curtain rod Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. as fixed in repairs complete all as directed by Engineer in charge

S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beadingscrews etc. complete all as specified.

Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, frame rabated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S/F 35 mm thick factory made (single panel ) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces klin seasoned and chemically pressure treated.

S&F Butt hinges mild steel 100mm long, medium weight, cooled rolled.

S&F Butt hinges mild steel 75mm long, medium weight, cooled rolled.

S&F 300 mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as directed by Engineer-in-Charge.

S&F 125mm long extruded Aluminium alloy handles, fabricated type anodised.

S & F 150mm long extruded Aluminium alloy handles, fabricated type, anodised.

S & F 125mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed.

S & F 150mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F sheet glass 3.00 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each as in repair

All as per Item No. 1.073 above but 3.00 mm thick figured glass

S&F of stainless steel wire cloth 0.36mm nominal dia and average with of aperture 1.4mm with beads & metal panel pin fixed in repairs

S&F 300mm MS ordinary rat tail rod pattern springs including roller & roller plate complete as in repair

S & F 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring , fixed in floor complete all as specified and directed.

Taking down of water tubing 15mm dia of pipe and connections removal to store complete all as specified.

Taking down of water tubing 20mm dia of pipe and connections removal to store complete all as specified.

Taking down of water tubing 25mm dia of pipe and connections removal to store complete all as specified.

Supplying and laying of 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed.

Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed.

Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified including all fitings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, celling or laid on floors including testing complete all as specified and directed.

S & F for 16 mm outer dia PPR polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised & antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls,ceiling or in floor etc complete all as specified and directed.

S & F for 20mm outer dia PPR polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised & antimicrobial welded having thermal stability for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls,ceiling or in floor etc complete all as specified and directed.

S & F in repair 15 mm dia fancy type CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down complete all as specified and directed.

Supply anf fixing in repairs ,stop valves ,cast copper alloy screwed down high pressure with crutch or butterfly handle ,screwed both ends for iron pipe for union and fixed (concealed type) fancy type and chromium plated completed all as specified and directed.

S & F in repairs 15 mm dia CP Fancy concealed type stop valves/ angular stopvalves , cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and directed.

S & F in repairs chromium plated shower roses 125mm size with or without swivel joints complete all as directed.

S & F in repair Towel rail, 60 cm long including chromium plated brass screws and wooden/plastic cleats complete all as directed by Engineer-in-Charge.

S & F in repair CP soap case complete all as specified and directed.

S&F in repairs for CP curtain rod 20mm dia with socket complete all as specified.

M & L for Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connection and fixed in position complete in all respects

S & F in repairs 15 mm dia CP pillar taps, cast copper alloy with capstan head, chromium plated screwed down fixed high pressure, long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair Pillar Cock Long Neck with Aerator fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

Supply and fix in repairs PVC connection of 15mm bore and 450mm long with brass check nut and union etc complete all as specified and as directed.

S & F PVC connection pipe 15mm size with PTMT nuts 450mm long complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S & F PVC grating doom 100 mm dia complete all as specified and directed.

S&F In repair vitreous china wash basin, white, flat back size 550x400mm, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc conections but inclmbrackets,wastevpipe,waste coupling in repairs.

S & F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat white closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32 mm dia for low level flushing cistern complete all as specified and directed.

S & F wash down water closet (pedestal pattern) complete white with plastic water closet seat white closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32 mm dia for low level flushing cistern complete all as specified and directed.

S & F in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

S & F in repairs glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long complete all as specified and directed.

Supply and fix in repairs 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe complete all as specified and as directed.

Dismantling water tanks exc 500 litres and n exc 1000 litres complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I 1000 litres capacity all as specified and directed by Engr-in-Charge.

M & L for 75mm PVC (SWR) floor trap or Nanhi trap, plain with grating including jointing with solvent cement complete all as directed by Engr-In-Charge

Taking down rainwater pipes including all fittings complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including necessary brackets clamps or laid in trenches complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) bends of any radius complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) junction single (Single "T") equal or unequal with access door complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) "T" of any radius complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

SCHEDULE 'A' PART-II (E/M PORTION)

Taking down carefully copper /aluminium point wiring (light, fan socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on independent board controlled with one, oneway switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for for one 5/6 amps socket outlet on same board controlled with other switch complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 4 Sqmm (phase & neutral) and one run of 4 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 15/16 amps socket outlet on independent board controlled with one, 15/16 amps one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one bell point controlled by one 5/6 amps, one way bell push including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light point controlled by one 5/6 amps, two way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

Supply and fix in repair circuit/sub-main wiring with PVC insulated & unsheathed two run of 4 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 2.5 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 20 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) Two runs of 4 Sqmm and one run of 2.5 Sqmm cable shall measured as one length.

Supply and fix in repair circuit/sub-main wiring with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 4 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 20 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) Two runs of 6 Sqmm and one run of 4 Sqmm cable shall measured as one length.

Supply and fix in repair circuit/sub-main wiring with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 20 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) Two runs of 6 Sqmm and one run of 6 Sqmm cable shall measured as one length.

Supply and fixing including connection of switch piano flush button type single pole one way 5 Amps.

M&L switch piano flush type single pole two way 5 Amp including connections.

Supply and fixing of Buzzer, Ding Dong AC. 230 volts.

Supply and fixing bell push, flush type, 5 Amp

M&L switch socket combinatrion 2 in 1,5 Amp flush type including connection

M&L socket outlet 2 in 1 5 Amp flush type 3 pin including connection

M&L switch socket outlet multipurpose 3 pin,15 Amps and one 5 Amp controlled by one switch

M&L switch socket combinatrion 5 in 1, 15 Amp flush type including connection

M&L ceiling rose PVC poly carbonate,isolated body with three terminals including connection.

S&F stepped type electronics fan regulator flush type 230/240V complete all as specified

M&L lamp holder angular type PVC/Polycarbonate type insulated body with back plate suitable for batten fittings.

M&L PVC blocks of size 100mm x 100mm x 50mm of laminated sheet of 3mm thick suitable for fixing of tube light fitting on wall/ceiling complete all as directed by Engr-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).

Taking down of Fan of 1200mm sweep and refixing at location as directed after and including spray painting with synthetic enamel paint and writting MES No on it including 2 feet down rod of appropriate size complete

Supply and fixing in repair of MCB DB double door made of sheet steel phosphates powder painted with bus bar, neutral link,earth bar and din rail single door type SPN 8 way 240V (Blank slots covered by Blanking plate)

Supply and fixing in repair of MCB DB double door made of sheet steel phosphates powder painted with bus bar, neutral link,earth bar and din rail single door type SPN 4 way 240V (Blank slots covered by Blanking plate)

All as per Sl Item No 2.026 above bu tripple pole and nutural 04 way,415V

Supply and fixing isolator TPN,415 Volt 100 A.

Supply and fix MCB SPN 40 amps, 240 Volts, C series including all necessary connection with thimbles all as specified.

Supply and fix MCB SPN 63 amps, 240 Volts, C series including all necessary connection with thimbles all as specified.

Supply and fix MCB SP 6-40 Amps Rating 240 volts, C series including all necessary connection with thimbles all as specified.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

M&L for fixing of earth contuninity conductor or main earthing lead aluminium strip 62x6 mm with shaddle,nut,bolts etc on existing roof conductor and down conductor fixed with and including fixing accessories and connecting to ground conductor complete.

M&L for earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6.0 mm buried directly in ground (earth pit not less than 2.25 Mtr below normal ground level ) connected to galvanized earth lead strip of size 32 mm x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel including 40 mm dia medium grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm dia, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type C1, 50 mm thick precast RCC (1:2:4) type B1 pit cover reinforced with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar including galvanised strip of size 32 mm x 6 mm for extension of earth lead and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a disance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No. 3 of SSR Pt-I including taking down old one , and all as directed and specified

M/s Manas Ranjan Bera

RPL SYNDICATE CO

bholanath bera

NUPUR CONSTRUCTION

vaishnaveedevienterprises

Bansal And Co

DS ENTERPRISES

Rounaq Enterprise

Bidder Name

DS ENTERPRISES

RPL SYNDICATE CO

Bansal And Co

Rounaq Enterprise

NUPUR CONSTRUCTION

M/S JANAKI ENTERPRISES

vaishnaveedevienterprises

bholanath bera

M/s Manas Ranjan Bera