supply and repairing of wheel berrows

Amount

Supply of wheelbarrow as per following specification (i) Size : 36"x24"x12" (ii) Framing top & bottom & side : MS angle of 40mmx40mmx5mm in required length (as per drawing approved by oic) (iii) Body : MS sheet(HR) of 16 gauge (1.6 mm thickness) fitted to chasis/frame using proper welding. (iv) Bottom body support(2 no. latitudely & one no longitudely) : MS flat 25mmx5mm with required welding and revetted to frame & body sheet. (v) wheel : 2no. of bending wheel of 24" dia. of MS Tech 40mmx40mmx5mm and MS flat for 40x5mm wheel support & hub fitted with axel(25mmx25mm square/ 25mm dia round bar of 100 cm long) with required hexagonal botl,round rivet,MS wahser,cotter pin & C.I hub(min. weight 3.5 kg) (vi) Handle : 2 no. of 27.5" long 25 mm dia 16 gauge MS pipe with grip & fitted with cart using MS angle of 35x35x5 mm (vii) Paint : two coat of redoxide & black/green enamel paint with marking MCP and year & no. Before supply one sample to be prepare and approved by store incharge and sanitory inspector-I

Supply of handpush cart(to accomodate 4 no. polyethelene 30 ltr capacity container ) as per following specification : (i) Size : 750mmX750mmX250m (ii) Main Framing : MS angle of 25mmx25mmx5mm in all direction of required length (as per drawing approved by oic) (iii)Bottom : 50mm x 25mmx5 mm T section one number at centre longitudinelly and one no laterally for resting bins & 25mmX 5mm MS flat 4 nos. at intermediate for body support & MS sheet of 18 gauge to be welded at bottom (iv) Sides: MS flat of 25mmX5 mm 6 nos vertically should be velded to main frame and all four sides to be covered with MS sheet of 18 gauge. (v) wheel : 2no. of bending wheel of 300 mm dia. & one support front wheel of 200-250mm dia. of MS Tech 40mmx40mmx6mm and MS flat for 40x6mm wheel support & hub fitted with axel(25mmx25mm square/round bar of 100 cm long) with required hexagonal botl,round rivet,MS wahser,cotter pin & C.I hub & double sealed bearing 6204 ZZ,bush as per direction of incharge. (vi) Handle : 30 mm dia 16 gauge MS pipe fitted with cart using MS angle of 35x35x5 mm (vii) Paint : two coat of redoxide & black/green enamel paint with marking MCP and year & no. (viii) provision of bracket for carrying broom & shovel & a closed hook of 16 mm rod for securing cart to be mounted on main frame of cart and each wheelbarrow should be supplied with 1500 mm long 5 mm MS chain and 7 lever jalaram lock. Before supply one sample to be prepare and approved by store incharge and sanitory inspector-I

Supply of handpush cart(to accomodate 6 no. polyethelene 30 ltr capacity container of size 340mmx340mm at top & 290 mmX 290 mm at bottom ) as per following specification : (i) Size : 1200 mmX750mmX250m (ii) Main Framing : MS angle of 25mmx25mmx5mm in all direction of required length (as per drawing approved by oic) (iii)Bottom : 50mm x 25mmx5 mm T section one number at centre longitudinelly and two no laterally for resting bins & 25mmX 5mm MS flat 6 nos. at intermediate for body support &MS sheet of 18 gauge to be welded at bottom (iv) Sides: MS flat of 25mmX5 mm 6 nos vertically should be velded to main frame and all four sides to be covered with MS sheet of 18 gauge. (v) wheel : 2no. of bending wheel of 450 mm dia. & one support front wheel of 200-250mm dia. of MS Tech 40mmx40mmx6mm and MS flat for 40x6mm wheel support & hub fitted with axel(25mmx25mm square/round bar of 100 cm long) with required hexagonal botl,round rivet,MS wahser,cotter pin & C.I hub & double sealed bearing 6204 ZZ,bush as per direction of incharge. (vi) Handle : 30 mm dia 16 gauge MS pipe fitted with cart using MS angle of 35x35x5 mm (vii) Paint : two coat of redoxide & black/green enamel paint with marking MCP and year & no. (viii) provision of bracket for carrying broom & shovel & a closed hook of 16 mm rod for securing cart to be mounted on main frame of cart and each wheelbarrow should be supplied with 1500 mm long 5 mm MS chain and 7 lever jalaram lock. Before supply one sample to be prepare and approved by store incharge and sanitory inspector-I

Supply of 30 ltr capacity polyethlene bin/container of(neelkamal, sintax polycon or equivalent make) of following specification : Size: 325 mm X 325 mm(top) & 290 mm X290 mm(bottom),Hight 325 mm Handle : 8 mm bar with MS strip of 1.6 mm thickness on both side of handle with heavy duty rivets Wall thickness : 3 mm minimum, bottom should be 4 mm There should be 4 holes on bottom of bin of 10 mm diamentr Marking/Embossment : MCP on both side colour : Blue/Green as per direction.

Repairing of wheelbarrow body sheet: Removal of damaged front/side/bottom sheet and fixing new MS sheet of 16 gauge with required welding & revetting to cart main frame& redoxide paint.(damaged sheet to be deposit in store to storekeepar & get receipt )

Repairing of wheelbarrow wheel: replacement of new wheel with bearing/hub bush pin etc.& fitting to existing axle.

Repairing of wheelbarrow wheel:by bending removal & fitting of new bearings/hub,bushes pins etc

Repairing of wheelbarrow wheel: replacement of new axle of 25mm dia round bar/25mmx25mm square bar with welding to main frame.

Repairing of wheelbarrow handle using 7" length of 30mm dia 16 gauge pipe & grip & fitted to cart using MS angle of 35mm X35mmX5mm

paint work : complete two coat bitumenous paint using black/green enamel of reputed brand & marking MCP & no. on both sides of cart in 4" size Letters.

Prateek Construction (BID ID -3134604)