WBSIDCL/31 Elec of 2025-26 Sl 1

Amount

Supply, fitting & fixing of three dimensional Mirror Finished stainless steel letter of SS-304 grade as per approved size (upto 300 mm x 200 mm) and design on aluminium composite panel using stainless steel stud, properly grouted with suitable sealeant in required height and level to diffused lighting from back side of each letter including cost of all materials and accessories complete in all respect as per EIC. (WBSIDCL both side of the gate & Siliguri Industrial Park on top of the beam)

S/F special type of imported 62.5mm thick acylic sheet having dimention of 375mm dia Biswa Bangla & National Emblem on ACP board. = 01 No board

S/F special type of imported 62.5mm thick acylic sheet having dimention of 375mm dia WBSIDCL industrial logo on ACP board. = 01 No board

S&F 230V, 1.5W LED module inside the acylic sheet letter. One run for each letter incl wiring (Make - Samsung/ Osram as approved by EIC) = 01 No board

S & F water proof 300 watt power supply system IP65, 50/60Hz frequency, 108 to 305V , AC power supply,.085 power factor for LED lamp. (make: Union or as approved by EIC).=2 No. Board

S/D 2 x 1.5sqmm Cu wire for LED module connection & SMPS connection.= 01 No board

S/'F 50mm x 25mm AL channel having length (12ft x 2 + 4ft x 2) x 01 No board

Supply & Laying 2 core 10 sqmm PVC insulated Ar/Al Power cable (Make: Gloster/Havells/ Polycab/ KEI or equ as approved by EIC) through existing HDPE Pipe.

Supply & Laying of one No. 40 mm HDPE pipe (Make: Ashirbad/ Oriplast/ Precession) in underground trench 460 mm wide x 760 mm average depth including filling the trench with shifted soil, leveling up and restoring surface duly rammed.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of PVC armoured cables as below : 2 Core 10 sqmm

Finishing the end of following PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 Core 10 sqmm

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required: 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Supply & Fixing Auto-Manual On & Off Timer panel (including suitable size M.S Box, 5 way terminal block - 2 nos, 10A, 240V DP MCB (L&T) - 1 No., 2 Pole 40A, 240V Power Contactors - Type ML2 (L&T) - 1 No., 6A, 240V SP MCB - 1 No., Time switch (L&T) - 1 No., 3 Pole ON - OFF Switches (L&T) - 1 No., 2.5 sq.mm copper wire for internal wiring & necessary connection) for Glowsign Board on flat iron frame / angle iron frame on wall. ( As per approved Drawing & Specification by EIC)

Providing CC (6:3:1) muffing 450 x 450 x 600 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3 mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if any incl. fixing only loop box if necessary.

Earth work in excavation of foundation trenches in all sorts of soil including removing, spreading or stacking the spoils as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

Supply, Fabrication, Fixing and fitting of angle iron frame fabricated from 75mmX50mmx6mm MS C Channel with cross 40x40x6 mm MS angle & redial support including six numbers 6inches X 6inches x10 mm MS base plate for fixing on the structure with all necessary welding & fabrication. the structure shall be proper welding as per instruction of E.I.C including painting as directed by E.I.C

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment.

Supplying and fixing 32A, 240V DP MCB Isolator on din rail of existing DBs and necessary connection. (Make: Legrand/ L&T/Seimens)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe

Excavation of soil for installation of Earth Electrode and filling & ramming. For Soft Soil

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages: ) : No. 4 SWG

Lifting the existing LED glow sign board from existing location & refixing the same beside the main gate. (2 nos. skilled labour, 2 nos. semi skilled labour & 1 no. unskilled labour per day)

Supply & Fixing of recess type round LED light fittings installed below the top beam of the main gate. (Make: Philips cat no. DN295B LED6S-10500 PSE WH S2 / Crompton/ K-Lite / Havells / Wipro as appd. by EIC.)

RADHA KRISHNA ENTERPRISE (BID ID -6891728)

MONDAL ENTERPRISE (BID ID -6891921)