CONSTRUCTION OF OFFICE AND STORAGE SPACE AT CWE (AF) NAGPUR

Amount

Taking down carefully existing tarfelt, plaster or concrete bedding upto the RCC slab of any description over the surface of roof ,terraces including flashing and junctions of parapet/curb walls etc including removing off rubbish, material to a distance exceeding 250m but not exc500m and depositing complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for complete all as specified and directed.

Material & Labour for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in roof slab to fill undulations to achieve uniform slope complete all as specified and as directed.

Material & Labour 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is still green finished even and fair including mixing of water proofing compound as per manufacturer instruction etc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately as supply only.

Material & Labour for one coat of bituminous based primer conforming to IS-3384-1986 @ 0.3 Kg/Sqm to be applied on prepared surface all as specified and directed.

Material & Labour APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application etc complete all as specified and directed.

Material & Labour for applying bituminous based aluminium paint @ 0.2 Kg/Sqm in two coat over APP based polymeric membrane all as specified and directed.

Material & Labour for cement concrete tiles 20cm x 20cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry as in roof slab with grey cement and no pigment, cut and polished over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Excavation in trenches n . exc 1.5 m wide and n. exc 1.5 m in depth; for foundation etc. or for shaft, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n exc 1.5 m in depth and getting out any type of soil/formation complete all as specified and directed.

Surface excavation n. exc 30cm deep and getting out in hard dense soil complete all as specified and directed.

Returning filling including spreading, leveling, watering and well ramming in layers n exc. 25 cm complete all as specified and as directed.

Removing excavated material n. exc 50 Mtr and depositing, where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and as directed.

Material & Labour for reinforced cement concrete type B1 (1:2:4) using 20mm graded stone aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Material & Labour for reinforced cement concrete type B1 (1:2:4) using 20mm graded stone aggregate in Chajjas complete all as specified and directed.

Formwork to sides and soffit of roof beams ,lintel level shelves incl supports over hang etc rough finished surfaces of concrete flat all as specified and directed.

Supply & Fix Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Supply & Fix mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Material & Labour for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Material & Labour for 40 mm thick cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in sub base of floor complete all as specified and as directed.

Material & Labour for brick work with sub class 'B' bricks, straight or curved on plan exec 6m mean radius, build in cement mortar 1:4 complete all as specified and as directed.

Material & Labour brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all complete as specified and directed.

Material & Labour for rendering 10 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished fair and even without using extra cement and including sagol finish complete all as specified and directed.

Material & Labour for rendering 15mm thicks on fair faces of brick work or concrete surfaces in two coats with the rendering coat of 10mm thick in CM(1:6) and finishing coat of 5mm thick. CM (1:4) in two separate layer mixed with Liquid water proofing compound @200ml per bag of cement, finished even and smooth without using extra cement at any height including necessary scaffolding, ladder, formwork etc complete all as specified and as directed. Note: Water proofing compund shall be measured and paid seperately under relevant item of this schedule.

Supply only liquid water proofing chemical complete all as specified and directed.

Material & Labour for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of alkali resistant primer over a POP putty of 2mm thick for making the surface even & smooth complete all as specified and as directed.

Material & Labour for preparation of new plastered surface and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed

Material & Labour for repairing of R.C.C projections, chajjias, roofs, facia, columns, beams etc., in patches not exceeding 3 Sqm in each patch by necessary preparation, Scrapping, cutting, chiseling, dusting and cleaning exposed reinforcement, surfaces of damaged, loose R.C.C surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforced with welded mesh (If Reqd) with or without facia and finished with 15 mm thick cement and sand mortar (1:4) using coarse sand and thickness of R.C.C member n. exc 75mm including necessary form work at any height including dismantling of damaged concrete complete all as specified and directed. (Note : welded mesh will be measured and paid separately.)

Material & Labour for 75 mm thick; PCC 1:3:6 type C2 using 40mm graded stone aggregate, as in plinth protection, complete all as specified and directed.

Supply & Fix for Steel work tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including distance pieces, cleats, gusset plates etc, complete all as specified and as directed.

Supply and fix for MS Plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment Fe-410-W (Gde E-250) quality 'B' all as specified and directed.

Supply and fix 25 mm dia Mild steel rag or lewis bolts exec 30cm long screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised complete as specified and as directed.

Supply and fix Hand rails, half round or other steel section drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including screwing bolts of grade Fe-290, Gde E-165 complete as specified and as directed.

Material & Labour for preparation for new or previously untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described for two coats of synthetic enamelled paint over a coat of red oxide or zinc chrome primer on steel surfaces etc, complete all as specified and as directed."

Material & Labour for preparation for new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth when unconducted with other painting or when painted in different tint and apply two coats of synthetic enamelled paint over a coat of red oxide primer etc, complete all as specified and as directed."

Supply & Fix Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including providing crimped eaves complete all as specified and as directed.

Supply & Fix Anodised aluminium snap grid frame work size 605x605 mm for false ceiling work incl Hangers 6 mm dia. G.I. (upto 1200 mm length) adjusting level fixed to existing roof/truss/rafters by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia. 40 mm long complete all as specified and as directed.

Material & Labour for Non asbestos fibre cement building boards 4 mm thick (one side embossed design), fixed or laid/ inserted to Aluminium grid frame work in ceiling with clips all as specified and directed.

Material & Labour for coloured non skid ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor 15mm thick screed bed or bedding layer in cement mortar 1:4, etc complete all as specified and directed.

Material & Labourfor glazed coloured ceramic tiles 300 x 600 x 7 mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and directed.

Material & Labour for Vitrified Ceramic tiles light shade/double charged/ultra charged 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Ditto all as per item No 40 above but in vertical surfaces as in skirtings, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:4 complete all as specified and directed.

Material & Labour for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 over 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) etc complete.

Material & Labour for machine cut kota stone slab 20-25 mm thick, in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,incl 10mm thick rendering on brick wall or concrete surfaces in cement mortar 1:4 complete all as specified and as directed.

Material & Labour for Granite18 to 20 mm thick table rubbed & polished in steps , jambs, cills, shelves etc including cutting of holes for fixing WHB in cement mortar 1:4 & pointing with white cement with marble dust using admixture of pigment to match with the shade of granite over and including 15mm thick screed in CM 1:4 complete all as specified and as directed .

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Supply & Fix for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinet ,wall hung type complete all as specified and directed.

Supply & Fix for 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in kitchen cabinet ,wall hung type complete all as specified and directed.

Material & Labour for straight, raking or circular cutting on iron or steel, as in straight or splay cuts, notches, rounded angles, width of cut exc 10mm but not exc 20mm, etc. (length or girth of cutting not exceeding 75mm) complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise specifically provide for all as specified and directed.

Taking down Chowkhats or frames with shutter (without taking off shutter from frame) exc 1.5 sq. m but n exc 4 sq. m each and removal from site all as specified and directed.

Supply and fixingFiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and complete all as specified and directed.

Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and complete all as specified and directed.

Supply and fixing factory made uPVC fixed window made of extruded profiles with wall thickness of 2.3mm (+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket. 1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with type of glass is to be mentioned complete all as specified and directed.

Material & Labour for anodised aluminium powder coated frame for doors, windows, ventilators sections any pattern, fixed/ side hung/ sliding (two or three track) using powder coated aluminium sections with or without sash bars, of approved make with one or more rebates including joining cleat for fixing etc complete all as specified and directed. Note:- The unit rates include for provision of PVC protecting sheeting & its removal after fixing the framework, Hinges & Lugs.

Supply & Fix anodised aluminium powder coated window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc ccomplete all as specified and directed.

Supply & Fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening complete as per specification and containing in SSR.

Supply & Fix factory made solid panels PVC shutters 30mm thick (syles) consisting of frame both side Prelam PVC sheet used instead of Plain colour PVC sheet, style and rails feathered at edges made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for styles & plain colour PVC sheet for to rail lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail paneling of panel colour PVC sheet to be fitted in the MS frame welded/scaled to the stiles & rail with suitable PVC sheet beading & jointed together with solvent cement supply & fixing in the frame at site complete as per specification & drawing containing in SSR.

Material & Labour for 100mm stainless steel butt hinges with galvanised mild steel hinges pin, ISI marked etc complete all as specified and directed.

Supply and fixing aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long etc complete all as specified and directed.

Supply and fixing aluminum handles cast type anodized 150 mm size etc complete all as specified and directed.

Supply and fixing 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy etc complete all as specified and directed.

Supply and fixing 10-12 mm thick plain/frosted toughened glass (logo of MES as specified and directed) as in hinged door, partitions, automatic doors, fixed glass type window and similar work with all necessary fittings like top and bottom brackets, two numbers of statinless steel handle as appropriate size for door, locking arrangement incl cutting to shape, drilling holes required etc alongwith all necessary fittings (but excluding double action floor spring) complete all as specified and as directed.

Material & Labour for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Dismantling water tanks of capacity exc 250ltrs but n.exc 500ltrs and removal to store complete all as specified and directed.

Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and directed.

Taking down 25 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and directed.

Supply and fixing Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top),of capacity 1000 ltrs hoisted and fixed in position all as specified and directed.

Supply and fixing 25 mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm - 210 gms/25mm-455gms/40mm - 690 gms) complete all as specified and directed.

Supply and fixing 15 mm bore two way brass chromium plated bib cock with wall flange, single lever handle screwed for iron pipe etc complete all as specified and directed. Make : Jaquar, Model No KUP-35041PM or equivalent.

Supply and fixing 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fixing 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete complete all as specified and directed.

Supply and fixing 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed.

Supply and fixing 25 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed.

Supply and fixing PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints in any position complete all as specified and directed.

Supply and fixing PVC (SWR) bends 110mm bore of any radius complete all as specified and directed.

Supply and fixing PVC (SWR) junction single ,(single T) equal or unequal 110mm bore complete all as specified and directed.

Supply and fixing PVC(SWR) vent cowl 110mm complete all as specified and directed.

Supply and fixing PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints in any position complete all as specified and directed.

Material & Labour for PVC (SWR) nahani trap, plain with grating suitable for 75mm dia outlet pipe including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with solvent cement complete all as specified and directed.

Supply and fixing PVC (SWR) bends 75mm bore pipes of any radius complete all as specified and directed.

Supply and fixing PVC (SWR) 75mm bore pipes junction single (single 'T'), equal or unequal complete all as specified and directed.

Material & Labour Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with minimum 25 mm water seal of PTMT. (Minimum weight 85gms) complete all as specified and directed.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe grade ‘A’ laid in trenches and jointed in cement mortar 1:3 or 1:4 complete all as specified and as directed for 150mm internal dia of pipe complete all as specified and directed.

Material & Labour cement for concrete bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate for 150mm bore of pipe complete all as specified and directed.

Material & Labour for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping/ surface channel/ drains complete all as specified and as directed.

Material & Labour for precast cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in cover slab for manhole etc set in cement mortar 1:6 including neccessary form work complete all as specified and directed.

Supply and fix for floor mounted white ceramic vitreous china wash down water closet pan of size 360 x 640 x 685 mm with UF soft close slim seat cover, hinges, dual flush cistern fitting and complete fitting accessories with P- trap 180 mm (EWC) (Make: Jaguar Model No. SLS-WHT-6851P180PP or equivalent) with ISI marked complete all as specified and as directed."

Supply and fix hand shower (health faucet) (ABS Chrome palted) with 8mm dia, 1m long, flexible tube with wall hook (Make: Jaguar, model :ALD-CHR-577 or equivalent) complete all as specified and complete all as specified and directed.

Supply and fix Vitreous China urinals, half stall (back Inlet & flat back) of size 385x325x635 mm, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Make: Jaguar, model :URS-WHT-13253N or equivalent) complete all as specified and directed.

Supply and fix Wall Hung vitreous China Wash hand basin white half pedestal of size 570 x 470 x 190 mm (flat back or angle back type) including all fittings and accessories, (Make: Jaguar, model :ARS-WHT-39801or equivalent), complete all as specified and complete all as specified and directed.

Supply and fix decorative type looking mirror of area not exc. 1.5 sqm each, 6-8 mm thick of any size complete all as specified and complete all as specified and directed.

Supply and fix PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and directed.

Supply and fix 15 mm bore angle stop cock long thread fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc Make: Jaguar (Kubix prime), Model No. KUP-CHR-35053PM or equivalent complete all as specified and directed.

Supply and fix 15 mm bore bib taps long body chromium plated fancy type with wall flange, single lever handle screwed down screwed for iron pipe or for unions etc, Make: Jaguar (Kubix prime), Model No. KUP-CHR-35037PM or equivalent complete all as specified and directed.

Supply and fix 15 mm bore pillar taps, long body chromium plated, fancy type screwed down high pressure with or single lever handle with long screwed shanks and fly nuts, screwed for iron pipe etc, Make: Jaguar (Kubix prime), Model No. KUP-CHR-35001PM or equivalent complete all as specified and directed.

Supply and fix tubular towel rail, 20mm dia, D type, 60cm long between flange fixed to wall complete all as specified and directed.

Supply and fix Soap dish brass chromium plated decorative type, fixed to plugs with chromium plated brass screwes complete all as specified and directed.

Supply and fix for toilet paper holder with flat recessed type chromium plated or stainless steel brass, fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

Material & Labour for sub main wiring (concealed) complete with two single core 6 Sqmm FRLS-H PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 6 Sqmm FRLS-H PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed Note:- 3 run of 6 sqmm & one run of PVC conduit shall be measured as single unit.

Material & Labour for sub main wiring (concealed) complete with two single core 4 Sqmm FRLS-H PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 4 Sqmm FRLS-H PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note:- 3 run of 4 sqmm & one run of PVC conduit shall be measured as single unit.

Taking down old Old u/s lights of any kind and Supply & Fix new master led tube 4ft 20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/Wipro complete all as specified and directed.

Supply and fix for Surface mounting LED Luminaries mirror light 9 Watt, 3 in 1 color LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . Cat No : LM3C9 Make : Lukar, or equivalent in CG,Phillips, Wipro/Bajaj complete all as specified and directed.

Supply and fix for natural/warm white 12 Watt LED round/square recessed LED down light with locking arrangement in ceiling with a nominal system lumen output of 600 lumens and a minimum system efficacy of 100 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. Make : CG Cat Prt No. LSCRM-12W-CDL or equivalent in Bajaj/Wipro/Philips complete all as specified and directed.

Supply & Fixing Decorative LED down light 36 watt recessed mounting type full lit luminaire with glare free uniform illumination with longer life and less maintenance, 2x2 Ft (>100 lm/W) complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, alongwith splite recessed mount ceiling frame kit of akuminium aloy complete all as specified and as directed. Make : Make : CG Cat Part No. LCTLRNE-36-FO-CDL or equivalent in Wipro/Philips .

Supply and fix for Switch modular type, single pole one way 6 Amps, 230 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in approved Makes.

Supply and fix for Switch modular type, single pole two way 6 Amps, 230 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in approved Makes.

Supply and fix for socket modular type 6 Amps 3 pin 2 module 230 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in approved Makes.

Supply and fix for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.

Supply and fix for socket modular type 6/16 Amps, 3 pin combine, 2 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in approved Makes.

Supply and fix for switch modular type 16 Amps,one way with indicator, 1 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in approved Makes.

Supply and fix for power unit for upto 3 ton AC up to 6 KW modular type , 4 module,230 volts all as specified and complete all as specified and directed. Make : Legrand /Havells/CG/Anchor

Supply and fix for sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 8 way, 240 volts, as per IS-8623 all as specified and as directed. Make : Legrand Cat No 507611, ABB,Seimens

Supply and fix for MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408617 ,ABB,Seimens complete all as specified and directed.

Supply and fix for MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand, ABB,Seimens complete all as specified and directed.

Supply & Fixing New Exhaust fan PVC body 10" ( 250 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, all as specified.Make : Bajaj, CG, Wipro, usha complete all as specified and directed.

Supply and fix for Wall mounted fan hi speed of size 16" plastic body including all acessories and connected material complete all as specefied and directed. Make : HAVELLS, CG, Usha, Bajaj

Supply and installation invertor based vertical pack type AC of capacity 2.5 TON (Copper coil) electric driven single phase, 230 volts, with cordless remote control unit, twin rotary compressor including all accessories like brackets, rubber tubing, copper tubing, gas charging etc including testing and commissionin as per norms of BEE and alongwith digital type voltage stabilizer automatic operation single phase, designed for input variation between 130 V to 300 Volt with output voltage stabilized at 230 Volts sutaible for vertical pack type AC of 3 TON and making good to the disturbed surface to match the existing surface complete all as directed. Make : Hitachi/LG/Blue star/'O' General/Voltas Note :- (i) All cooing /condensing coil should be made of copper material. (ii) Copper tubing including insulation required if extra is included in the quoted rate. No extra payment will be allowed for extra piping. (iii) All necessary cutting of POP/ ceiling/wall if required is deemed to be included in the quoted rate. No extra payment will be allowed for the same.

Supply and fix power plug top suitable for AC of 3.0 Ton complete all as specified and directed.

Material & Labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable ISI marked modular boxes ,inner and outer cover of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.

One light point controlled by one switch

One fan point controlled by one switch

One exhaust fan point controlled by one switch.

One switch socket outlet modular type 3 pin 6 amp on same board.

One light point controlled by two, two way switches

All as per item No 121 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board complete all as specified and directed.

All as per item No 121 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board complete all as specified and directed.

Supply and fix PVC rigid conduit pipe 20/25 mm dia including all accessories and necessary saddles with fixing screws, gutties etc.for drain out water complete all as specified and directed.

Supply and fix split AC stand of outdoor unit suitable for 2.5/3 ton including necessary fixing arrangement complete all as specified and directed.

Dismantling of 1.5/2 TR capacity of split type ACs and removing of existing indoor/outdoor units, including MS angular frame /MS channels, copper tube , foundation frames etc, complete and closing of holes of pipe line and drain water opening and making surface good with plastering and painting to match the existing colour of walls complete all as specified and directed.

Fixing of 1.5/2TR capacity of split type Acs indoor& outdoor units including MS chanels, modification of copper tubes including installation foundation frames of out door unit complete and provision of opening of through holes for pipe line and drain water in brick/stone masonary wall and disturbed surface making good with plastering and painting to match existing colour of walls. Note: Item obtained from ser No 126 shall be reused complete all as specified and directed.

Supply and fix for sheet metal enclosures for DB's for incorporating MCBs, TPN, 4 way, IP-54 with metal double door, 415 volts, as per IS-8623 including taking down the old Old u/s TPN DB, all as specified and as directed. Make : Legrand Cat No 507670, ABB,Seimens complete all as specified and directed.

Supply and fix for MCB TPN, 40-63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408683 ,ABB,Seimens complete all as specified and directed.

Material & Labour for Earthing complete with galvanised steel plate electrode, 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtrs deep below nominal ground level) with top edge of the plate not less than not less than 1.5 metres below nominal ground level connected to earthing lead of 4 mm dia galvanised iron or steel wire all as shown in plate No. 4 of SSR PART 1 of 2009 to the earthing test point all as specified and as directed. Note :- the cost of excavation and earth work PCC pit and RCC cover funnel & watering pipe, wiremesh, charcoal dust and common salt earth lead protection pipe upto 7.5 Rmt shall be deemed included in the unit rate for earthing all as specified and as directed.

Material & Labour for laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 25 sqmm 4 Core all as per IS , specified & complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide & not exceeding 1.5 meter in depth for foundation,laying of cable or pipe ( where provided for protection of cable or fixing with poles and stays) and getting out in any type of soil including trimming the sides and forming bottom surfaces to required levels complete all as specified and directed.

Removing surplus excavated soil to a distance n.exc. 50 metre and depositing where directed at a level n.exc.1.5 metre high from the starting point complete all as specified and directed.

Returning, filling in trenches in soft/loose soil in layers n.exc. 25 cm after laying of cables including spreading, levelling, and well ramming complete all as specified and directed.

Material & Labour for High density polyethylene pipes (HDPE) DWC duct pipe of size 50 mm dia laid in trenches for passing of LT cable complete all as specified and directed.

Supply and fix earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles for loop earthing as required 25 x 3 mm copper strip alongwith earthing strip epoxy type insulator complete all as specified and directed.

Dismentaling of GI Strip or Earth continuity conductor or main earthing lead fixed on wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles for loop earthing complete all as specified and complete all as specified and directed.

Material and labour for maint free safe earthing system burnished copper earthing electrode grade 10 CM dia mde of high tensile low carbon steel closed with 10 CM electrolyte plate with set of four separate electrode to be sued as grid earthing each pit complete with 01 Number UL 467 approved/ CPRI tested copper bonded (copper cladded earth rod with 250 microns of copper cladding) earth rod with 17.2 mm dia 3000 mm long electrode buried in ground to bore holes 150 mm dia vertically to a depth not less than 3.50 mtr deep below ground level or L shape in case of rocky condition (2 ft deep and 8 ft horizontal) with top edge of earth electrode at a depth not less than 500 mm below normal ground level, provision of copper bus bar of size 200mm x 25mm x 6mm for inter connection with copper earth lead strip 25mm x 3mm and further connection to test point terminal block alongwith the protection pipe of size 25mm bore medium grade and epoxy type insulator all as directed. Each earth pit shall include minimum 50 Kg (two bags of 25 Kg each) NABL lab Certified back fill compound and 6 Kg (two container of 3 Kg each) NABL Lab Certified conductive gel compound for filling bore holes with replacement of rocky soil with loamy garden compound and three part of loamy garden soil), so as to achieve earth resistance below 1 Ohm including excavation of polypit chamber with polyplastic pit cover heavy grade of size not less than 300mmx300mmx300mm and painted with weather proof red paint and identification marking (cost of poly pit chamber with polyplastic pit cover shall deemed to be included in the quoted rate) complete all as specified and as directed. Make : SN Engineering, Dhruva Technology Pvt Ltd, Pragati, Ashgel Electrode or equivalent.

139 Contd..../- Note : (a) Copper strip beyond test point shall be measured and paid separately. (b) Contractor shall give gurantee of minimum 2 yrs for the earthing carried out by him. (c) The rate quoted is inclusive of test point made of phosphorous bronze of size 75x75x75mm, drilled and screwed including 3 Nos 8mm dia 25mm long brass nuts and bolts complete all as directed. (d) Any other fittings/ fixtures if technically requited for archieving desired results (if not included above) shall be provided by contractor without any extra cost to the Govt. (e) On testing, after completion if the desired resistance i.e. below 1 Ohm is not obtained, the contractor shall redo the earthing without any extra cost from department. (g) Protection pipe upto equipment (if required) shall deemed to be included in the unit rate for earthing. (h) Copper strip upto 7.5 RM shall deemed to be included in the unit rate for earthing all as specified and as directed. (j) Earth pit to be insepected by the contractor or by his rep on monthly basis.

Supply and fixing Air termination, single pointed, cooper rod 12 mm dia, 300 mm long alongwith copper base plate and all fittings and fixture all as specified and directed.

Note : The amount against Schedule of Credit on Page No. 43 shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

Rehal Construction (BID ID -3409793)

M/s Prakash R. Verma (BID ID -3416723)

Dua Construction (BID ID -3416928)

AK CONSTRUCTION (BID ID -3417224)

Raut Construction (BID ID -3404939)

Bidder Name

M/s Prakash R. Verma

Rehal Construction

Raut Construction

M/s Ashwin Bhange

AK CONSTRUCTION

Dua Construction