REPAIRS TO WOODEN DOORS WINDOWS ALUMINIUM DOORS WINDOWS PARTITION FALSE CEILING AND MISC WORKS INSIDE TECHNICAL AREA RCI UNDER GE I RND RCI HYDERABAD

Amount

Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5 Sqm complete all as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm but n.exc 4 Sqm complete all as directed.

Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed.

M&L, making good under cills or over arches, lintels and bressummers including all pinning when necessary in cement mortar 1:4 finished to match with the existing work complete all as directed.

S&F, 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

S&F, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F, 100mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all specified and as directed.

S&F, 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fixing factory made uPVC white colourThree track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sashextruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. complete all as specified and as directed.

S&F anodised aluminium frames for doors , windows ventilatores with one or more rebate including jointing cleats for fixing etc complete all as specified and directed.

Supply & Fix aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, partitions , door shutters , windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

Supply & Fix aluminium Powder coated (minimum thickness of powder coating 50 micron) sliding shutters for windows with one or more rebates including joining cleat, handles and suitable locking arrangements etc., for fixing complete all as specified and directed

S&F, aluminium powder coated of any colour ventilators, partly louvered and partly fixed type without sash bars including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, louvers etc., complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed complete all as specified and directed.

S&F Neoprene/EPDM gasket/ washers for fixing glass complete all as specified and directed.

M&L for Sheet glass 4 mm thick, ordinary quality tinted glass exc 0.5 sq. m in each pane all as specified and direcfted.

M&L figured glass 4 mm thick pin head type and glazing with glazing clips n. exc 0.5 sqm in each pan complete all as specified and directed.

S&F 12mm thick prelaminated particle board,interior grade , prelaminated one side with decorative choice lamination and other balance side with white lamination fixed with screw or beadind complete all as specified and directed. ion both sides as in panal in aluminium door , partitions etc .

S&F in repairs, mild steel framed work such as grills, gratings etc., framed guard bars and similar works conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F in repairs, mineral fibre acoustical suspended ceiling system with Mina Tuff (Micro look) edge tiles with silhouette exposed grid. The tiles hold have humidity resistance (RH) of 99%, NRC upto 0.6, light reflectance 88%, Thermal conductivity K=0.052-0.057 w/m K, colour white, fire performance Class-I (BS476 Part 6 & 7) in module size of 600 x 600 x 16mm with bio black coating on the face of the tile, impact resistant and suitable for green building application, with recycled content of 63%, Tile shall be laid on Silhouette profile grid system with 15mm white/black colour and with a web height of 38mm and having load carrying capacity of minimum 11.68 Kgs/Sqm, Silhouette, Main runner and Cross tees to have mitred ends and Birds mouth notches to provided mitred cruciform junction complete all as specified and directed. Make: Armstrong, Saint Gobain

S&F in repairs, Fine Fissured RH99 Armstrong ceiling tile of size 600 x 600 x 12/16mm thick as per approved pattern complete all as directed.

M&L in repairs, 12mm thick gypsum board in false ceiling fixed with screws as per manufactures specifications including applying one coat of putty, rubbing/grinding with sand paper and making smooth and even surface and applying one coats of distemper oil emulsion over a coat primer complete all as directed. Make: Saint Gobain or equivalent as approved by GE.

M&L, preparation of new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair, aluminium (Die cast) body door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60Kg complete all as specified and as directed.

S&F in repairs, Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S&Fin repairs aluminium door Lock four lever vertical type brass body, 100mm long with duplicate key complete all as specified and directed. Make: Godrej, Link, Harrison

S&F in repairs for Steel rolling shutters as in thicknes of laths in mm 1.00mm, with out ball bearing, as specified incluidng top cover, anchring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete incl taking down old all as specified and directed by EIC.

S&F in repairs for Steel rolling shutters Ball bearing for rolling shutters all as specified and directed by EIC.

M&L preparation of new surfaces of steel over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of primer.

M&L preparation of steel over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down existing mild steel shaft 125 to 150mm and 4mm thick providing new shaft, class 'C' including necessary cutting, welding, drilling holes and refixing the bearing and other mounting accessories for rolling shutters of any size complete all as specified and directed.

S & F, in repairs Motorized Rolling shutter motor along with push button, side bracket with chain sprocket and washer from existing location, supplying and fixing new rolling shutter motor with bracket and push button suitable for rolling shutter of weight not exceeding 600Kg complete all as specified and directed. Make: Jielong or equivalent as approved by GE

S & F, in repair Motorized Rolling shutter motor along with push button, side bracket with chain sprocket and washer from existing location, supplying and fixing new rolling shutter motor with bracket and push button suitable for rolling shutter of weight not exceeding 1000Kg complete all as specified and directed.

S&F Venetian blinds rolling system upward type of approved colour including operation chords, roller, counter nut, connection chain, necessary fittings complete all as directed. Make : AMAR/MAC and equivalent.

S&F vertical type venetion blinds of approved colour using 100mm wide fabric blinds including operation chords, threads, counter nut, connection chain, necessary fittings etc., Make : AMAR/MAC and equivalent.

ELEVATORS MAINTENANCE ENGINEER WORKS

M/s K Venkateswara Rao

sanjar enterprises

Anjana corporation

Venkat Sai Enterprises

SUN LIGHT HOUSE

BHAGYARAM ENTERPRISES