REPAIR TO ROOF, ROOF SHEET, FLOOR, PLINTH PROTECTION, PLUMBING AND SANITARY FITTINGS AND MISC B/R WKS AT CARRIAPPA OFFICER ENCLAVE AND KARAM SINGH ENCLAVE UNDER GE PANAGARH

Amount

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius build in CM (1:6) complete all as specified directed.

All as per item No 2.00 mentioned here-in-above but except bricks complete all as specified and directed

M&L for brick work with fly ash bricks straight or curved on plan exc 6 m mean radius in half bricks thick build in CM (1:4) all as specified as directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 15 mm thick cement plaster in CM (1:4) on brick work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5 mm thick cement plaster in CM (1:3) on concrete surfaces as in ceiling, chhajja, shelves etc to match with existing surfaces including finishing even and smooth without using extra cement complete all as specified and directed.

M&L for 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall applying of two coats of weather proof paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling applying three coat white wash complete all as specified and directed.

M&L for preparation of new plastered surface of wall applying three coats white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).

Removal of complete existing treatment of any description on roof surfaces of any description and roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust, foreign items complete all as specified and directed.

M&L for PCC(1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stop rounded complete all as specified and directed

M&L for 25 mm thick average PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) for grading in roof all as per Para 11.42.2 of SSR Part –I 2009 complete all as specified and directed by Engineer- in-Charge.

M&L for rendering 10 mm thick on fair faces on roof surfaces of concrete surfaces in cement mortar (1:4) without using extra cement and WPC complete all as specified and directed. (Note: WPC will be measured and paid separately).

Supply only liquid water proofing compound complete all as specified and directed. (Makes : M/s Pidilite Industries/ M/s Impermo/M/s Snowcem India Ltd/M/s Sika)

M&L for preparation any surfaces of roof and applying two caots of Polyurethane (PU) acrylic based water proofing liquid compound over & including one coat of self priming primer @ one Litre per 10 Sqm with reinforcing fabric sheet as per manufactures instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge. (Notes:- (i) As per description of this item minimum two coats of Polyurethane (PU) acrylic based water proofing liquid compound over one coat of primer shall be carried out by as per manufacturer instruction. Please note no price adjustment shall be made, if as per manufacturer instructions more coats of Polyurethane(PU) acrylic based water proofing liquid compound & primer are required for roof treatment. (ii) Quoted rate shall be deemed to be included for work in building/Structure of any height)

Disconnecting existing tanks exc 500 and n exc 1000 ltr capacity setting aside for repair/cleaning etc and re-fixing in position including pipe line complete all as specified and directed

S&F in repair 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

Dismantling of AC corrugated, same corrugated sheets in roof covering complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed

Demolition and breaking up drain pipes of any description set in cement mortar (internal dia of pipe upto 110 mm) dia, complete all as specified and directed by the Engr-in-Charge.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed

S&F 75mm PVC (SWR) bends any radius with access door complete all as specified and directed

S&F 110mm PVC (SWR) bends any radius with access door complete all as specified and directed

S&F 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for complete removal of existing treatment, preparation of surfaces and applying two coat of external weather coat paint (Apex) on wall/ceiling surfaces over a coat of primer and a coat of wall care putty complete all as specified & directed .

Taking up or down steel tubing of 20 mm dia and removal to store complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Refixing GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed.

M&L for hardcore of broken stone gauge n.exc. 63 mm, deposited, spread and levelled in layers n.exc.15cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for providing 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) in sub base of flooring complete all as specified and directed.

M&L for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and directed.

S&F 38 mm wide and 3 mm thick glass dividing strips as in flooring complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in plinth protection and paving complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed

M&L for 25 mm thick PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in laying of floor finishes and finishing even complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exc 0.06sqm but n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry complete all as specified and directed

M&L for glazed ceramic tiles 300 x 200 mm x 7 mm thick in vertical surfaces such as risers, skirting and dados, set and jointed in neat cement slurry and pointed in coloured cement to match including 10 mm thick cement plaster in CM (1:4) on brick or concrete surfaces complete all as specified and directed.

M&L for coloured non skid ceramic tiles (joint free) 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for coloured non skid ceramic tiles (joint free) 7 to 8 mm thick (Square/Rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in skirting or dado, etc set and jointed in neat cement slurry and including 10mm thick rendering in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes complete all as specified and directed.

M&L for vitrified ceramic dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and jointed in neat cement slurry complete all as specified directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge).

M&L for vitrified ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and jointed in neat cement slurry all as specified directed. (Note : Design, shade and pattern of fixing of tiles shall be as directed by Engr-in-charge)

Complete removal of old plastered surface of wall and applying two coat of weather coat exterior emulsion paint over a coat of primer all as specified and as directed.

Taking down chowkat or frame with shutters n.exc 1.5 sqm each (without taking off shutter from the frame) complete all as specified and directed

Taking down chowkat exe 1.50 sqm and n.exe 4 sqm (without taking off shutter from the frame) each complete all as specified and directed.

Taking down shutters exc. 1 sqm and n.exe 2 sqm each complete all as specified and directed.

Taking down shutter exe 2 sqm each complete all as specified and directed.

Refixing shutters of any description exc 1 Sqm but n.exc 2 sqm each in same opening complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S&F factory made 35 mm thick 2nd class hardwood plain framed panelled shutters (three panel) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces complete all as specified and directed. The size of rail and stile as per ISI 1003 (part-I) kiln seasoned and chemically pressure treated.

S&F 2nd class hard wood 35mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauge, etc sizes of members of shutters as specified in SSR Part - I, section - 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails mild steel frame shall be convered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert of top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, and S&F in the frame at side as per specification and drawing complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specification complete all as specified and directed. complete all as specified and directed.

S&F steel windows with side hung shutters (minimum wt. of steel section should be 1.42 kg/M) including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded, including making good disturbed surfaces as per existing specification complete all as specified and directed. complete all as specified and directed.

S&F steel ventilators with centre hung shutter (minimum wt. of steel section should be 1.42 kg/M) including two pairs of brass cup pivots, catch spring and pulley wheel, complete dovetailed or welded including pintol hinges, steel handles, etc. as shown with fixed type including one coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for framed work such as grills etc with ends of bars shouldered and or riveted or forged into spike, framed guard bars and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 as in bed blocks for hold fast including necessary formwork complete all as specified and directed

S&F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C21 complete all as specified and directed

S&F 200 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

S&F 100mm size stainless steel butt hing medium weight cold rolled complete all as specified and directed.

All as per item No 69.00 mentioned here-in-above but 50mm size complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

S&F 2nd class hard wood small fittings such as door and window stops and cleats including all necessary articles exc 200 cu cm and n.exc. 500 cu.cm each complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass pin headed type and glazing with oil putty in square n.exc. 0.50 sqm each pane complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specified and directed.

Fixing only in steel tubing and connection 15 mm dia bore complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n.exc. 10cm girth complete all as specified and directed.

S&F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel of size 750 x 600 mm including screws complete all as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarft wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410 mm x 330mm x 160mm complete all as specified and directed

S&F in repair PVC waste pipe 32mm dia for wash basin and sink 01 meter long complete all as specified and directed

S&F in repair soap dish, vitreous china white, approximate size 160 x 160 x 90 mm, fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F in repair toilet paper holder, vitreous china box type fixed to wall with chromium placed brass screws complete all as specified and directed.

S&F in repair PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed.

S&F in repair 15 mm bore stop valve cast copper alloy fancy type, chromium plated with long sunk and cup, screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions (concealed type) complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless, symphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size (With brackets) complete all as specified and directed.

S&F in repair bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair vitreous china squatting pan of pattern 'Orrisa' size 580 x 440mm white with integral foot rests including connection to trap and to flushing pipe, antisyphonage pipe etc complete including making good to existing (floor / Tiles) complete all as specified and directed.

S&F in repair vitreous china Water closet (pedestal pattern) complete including provision of lime concrete bedding white, including plastic WC seat cover, closed pattern with flat bottom and mild steel CP hinging device and including connection to GI pipe line complete all as specified and directed

S&F in repair vitreous china wash basin white, flat back, size 550X400 mm including cutting for pinning in ends of brackets, complete all as specified and directed.

S&F in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.

S&F in repair chromium plated shower rose with without swivel joints, 125mm size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair for vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (back to corner wall type), complete including providing and fixing plus, bedding urinal against wall in cement mortar (1:2) securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.

Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repair 32 mm bore dia of discharge pipe waste coupling of PTMT (half or full threaded) minimum weight 32mm-45gms) complete all as specified and directed.

S&F tubular towel rail brass chromium plated 20mm dia, 'D' type, 60cm long between flanges and including brackets complete all as specified and directed.

S&F in repair 15mm bore Brass CP Mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F Powder Coating Anodised aluminium window and ventilator shutters side hung/sliding type without sash,(minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 Nos) hinges type B-21 100mm long (2 Nos) suitable handle (1 Nos) complete all as specified and directed

S&F in repairs, door closer aluminium body, hydraulically regulated, designation No. 2, universal type, suitable for door shutters and weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge .

S&F in repairs, floor door stopper 140 mm of aluminium alloy body with rubber shoe and tongue, anodised, with hard drawn steel spring and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair mortice lock vertical type 100 mm 4 lever brass fixed in aluminium door complete all as specified and directed by Engr-in-Charge.

S&F in repair galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed by Engr-in-Charge.

S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple complete all as specified and directed by Engr-in-Charge.

M/S BHATTACHARJEE ENTERPRISE

S. D. Construction Co.