RENOVATION OF DEBEL REFRESHER FACILITY AT DEBEL CV RAMAN NAGAR BANGALORE

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises all as specified and as directed

M&L for 25 mm thick PCC 1:2:4, in flooring (1 cement : 2 coarse sand : 4 graded stone aggregate) finished, including cement slurry, but excluding the cost of nosing of steps etc. complete all as specified and directed.

M&L for vitrified floor tiles (double charged) 600x600 (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete all as specified and directed.

M&L for 25mm thick Machine cut Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) complete all as specified and directed.

M & L for machine cut Granite stone slab, Black/Cherry/Ruby red granite slab 18-20mm thick fixed, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, verticle surface and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels complete all as specified and directed.

Rounding to edges /edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Taking down/Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.

M&L 10 mm thick plaster in CM 1:6 on other than fair faces of walls , finishing the surfaces even and smooth w/o using extra cement complete all as specified and directed.

M&L for Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two coats) over and including water thinnable priming coat with cement primer & as directed by EIC.

All as per item 10 above here-in-before but one coat on old surface including preparation of old walls & as directed by EIC.

M&L for preparing old plastered surface & Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade one coat (Company Depot Tinted) with silicon additives.applied @ 0.9 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and directed.

Dismantling roofing including ridges, hips, GI Sheets, valleys and gutters etc., and stacking the material within 50 metres lead of complete all as specified and directed.

Providing & Fixing 0.63mm thick corrugated G.S. sheet roofing including vertical/horizontal/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required(Height up to 12 to 15 Mtr, factory type bldg/Hangar) complete all as specified and directed.

S & F for solid PVC wall lining/panelling consisting of 5mm thick plain colour/granite texture decorative modern PVC sheet inclusive of solvent cement/adhesive and fixing at site on PVC frame as per specification and drawing and as directed by EIC

M & L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall with necessary screw to make PVC frame as per specification and drawing and as directed by EIC.

S&F in repairs table top counter sunk Wash hand basin oval type white flat back of size 560x400x205 including Swan neck pillar tap 15mm erecting stands exclusive of waste pipe and 32mm brass chromium plated waste coupling with long screwed sank and fly nuts and RCC slab for fixing wash basin along with CP angle cock and 450mm PVC connection all as specified and as directed

Providing and fixing 1500x600 mm beveled edge mirror with 6 mm thick hard board wooden frame and wooden beading around the glass complete all as specified and directed.

Providing and fixing in repair 50mm High Density polyethylene pipes(HDPE) of pressure rating 6Kgf/cm laid in trenches/walls/floors complete all as specified and directed.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete all as specified and directed.

M&L for Steel work (Hot finished welded type tubes) in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete all as specified and directed.

Providing and fixing in repair false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on interlocking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate crossT of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge

S&F in repair Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge

Steel water tubing medium grade 15mm bore galvanized with all fittings and fixed to walls and ceiling or laid in floors including cutting chases where required complete all as specified and as directed

All as per item No. 25 above but of size of 20mm bore

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area beyond 3 sq. metres complete all as specified and directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Providing and fixing glazing 4mm thick in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . weight not less than 10kg/sqm)

S&F black/golden colour solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer including taking down existing damaged films complete all as specified and directed.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000L, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, including removal of old one complete all as specified and directed.

Supply & fix in repair ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore complete all as specified and directed.

Supply & fix in repair gun metal gate valve with C.I. wheel of approved quality (screwed end) 20 mm nominal bore complete all as specified and directed.

M&L preparing surface, new steel/old steel surface and applying two coats of synthetic enamel paint and as directred by EIC.

M&L for 75 mm thick PCC 1:2:4, in flooring (1 cement : 2 coarse sand : 4 graded stone aggregate) finished, including cement slurry, but excluding the cost of nosing of steps etc. complete all as specified and directed.

M&L for 75mm Cast Iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F Wire netting of stainless steel wire 1.4mm dia size of mesh 12mm fixed with tinned tacks of stainless steel wire staple and complete all as specified and directed.

Taking down carefully the existing aluminium point wiring of any size and capacity and type by disconnecting from the either terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings any type etc by unscrewing and taken away from site complete. Note :cost of unserviceable materials will be charged from the contractor against schedule of credit.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as reqd for group B bldg (a) For one light point controlled by one switch

All as per item no.37 above but For one Ceiling/ Exhaust fan point controlled by one switch through regulator complete all as specified and directed.

All as per item no.37 above but For one three pin socket out let 5 amps on independent board complete all as specified and directed.

All as per item No. 37 above but 2.5 sqmm copper conductor wiring with 2.5 sqmm copper conductor as earth continuity for power point of 16 Amp all as specified and directed.

Supply and fixing of Modular switch 5/6 A, 1 way, 1 module, 230 Volts all as specified and directed.

Supply and fixing of Modular switch 16 A, 1 way, 1 module, 230 Volts all as specified and directed.

Supply and fixing of Modular fan regulator step type 120 w, 230 Vots, 2 Module all as specified and directed.

Supply and fixing of Modular socket 6 A, 2/3 pin Combined, 2 module, 230 Volts all as specified and directed.

Supply and fixing of Modular socket 6 A/ 16 A, 6 pin Combined, 2 module, 230 Volts all as specified and directed.

Supply and fixing of ceiling rose surface type 3 terminals, PVC polycarbonate, Isolated body all as specified and directed.

Supply and fixing of sheet metal enclosure powder coated, Distribution board, Double Door type, VTPN MCCB 125 Amps as Incomer, 8 way, 415V, Double door type IP 43 protection, shrouded Neutral Bar & Pan assembly with flexible link Cement spill protector, Door earthing, complete all as specified and directed.

S &F in Replacement of Distribution Board, SPN 8 way, 240V, double door type all as specified and directed.

Supply and fixing of MCB, SP, 240V, 06 to 32 Amps 10KA rupturing capacity all as specified and directed.

Supply and fixing of MCB, SPN, 240V, 06 to 32 Amps 10KA rupturing capacity all as specified and directed.

M & L for sub main wiring with four single core PVC insulated unsheathed , 1100 Volts grade, copper cable 2x 10 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit of suitable size with conduit accessories such as junction boxes, bends, tees etc. including continus earth wire PVC insulated unsheathed 1100 volts grade, 1 run of cable 10 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring all as specified and directed. Note :-(i) One run of PVC conduit, 03 runs of cable shall be measured and paid as one unit.

M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, copper cable 2x 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit of suitable size with conduit accessories such as junction boxes, bends, tees etc. including continus earth wire PVC insulated unsheathed 1100 volts grade, 1 run of cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring Note :-(i) One run of PVC conduit 3 runs of cable shall be measured and paid as one unit.

M & L for sub main wiring with single core PVC insulated unsheathed , 1100 Volts grade, copper cable 2 X 4.00 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit of suitable size with conduit accessories such as junction boxes, bends, tees etc. including continus earth wire PVC insulated unsheathed 1100 volts grade, one run of cable 4 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring Note :-(i) One run of PVC conduit one runs of 2 X 4.00 sqmm cable and one run of 4.0 sqmm of earth wire shall be measured and paid as one unit.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Taking down old existing ceiling fan 1200/1400 mm sweep single phase,Servicing of ceiling fans and painting of ceiling fans and refixing and connecting with necessary cable from ceiling rose or connector to fan and making good to damaged surface of wall/ceiling to match existing finish all as specified and directed

Taking down old existing Exhaust fan 300 mm/400 mm sweep single phase,Servicing of painting of exhaust fans and refixing and connecting with necessary cable from ceiling rose or connector to fan and making good to damaged surface of wall/ceiling to match existing finish all as specified and directed

Supply and fixing LED street light fitting 36 Watt230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fix 3 Pole MCCB 125 Amps, thermomagnetic release 50 Hz, 415 V with rupturing capacity 16 KA in existing panel/vtpn DB etc all as specified and directed.

TECKXPERT ENTERPRISES

m/s raghavendra kulkarni

MAJ CONSTRUCTIONS

Prashanth Associates

Aavani BUILDERS AND CONTRACTORS

M/s STAR ELECTRICALS