PROVN OF RCC DRAIN REAR SIDE ORs MESS AT CAMP OF ARMY WAR COLLEGE AND PROVN OF TILING OF INTERNAL CORRIDOR WALL AT F DIV (CC-319) JC WING (AWC) AND PROVN OF ONE GENR SHED AT OFFICE COMPLEX ACE AND PROVN OF PIPELINE FOR RECHARGING LAKE VIEW THROUGH ST

Amount

Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth for foundation etc or for laying of pipe and for XLPE Cable and exc 10 sqm on plan and n exc 1.5 m in depth getting out in Soft / loose soil complete all as specified.

Returning filling in, including spreading, levelling watering & well ramming in layers not exc 25cm thick complete all as specified and directed.

Removing excavated material to a distance not exc 50 mtr & depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate pedestrial to support pipeline and on road crossing including necessary use & waste of form wk for fair finished surfaces complete all as specified and directed.

Supply, laying, jointing and testing GI tubing of bore 50mm medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittings for laid in trenches/wall/ceiling/ floor/ all as specified and directed.

Cutting & screwing of existing GI pipe water tubing of bore 50/80 mm for addition or alterations or lenghening screw on pipe to connector and done in position without taking down complete all as specified and as directed.

Supplying, fixing, jointing and testing non-return valve suitable for GI tubing of size 50 mm bore both ends flanged and drilled for jointing including two flange joints and jointing material such as nuts, bolts washers rubber packing etc including taking down complete all as specified and as directed.

S&Fing Gun metal gate valve of size 50mm ISI marked) with spindle and iron wheel, both ends screwed, iron pipe of following bore size including fittings and fixtures, as required, complete all as specified and as directed.

Supply and fix Cast Iron Air release Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Cast Iron Water supply mains of size 50 mm dia

Supply and fixing of DOL starter suitable for three phase,monoblock pump of capacity 10 HP complete all specified and as directed.

Supplying, laying and testing cable XLPE insulated 25 sqmm 3 1/2 core, screened, PVC bedded galvanized steel strip or wire armoured electric power cables ( heavy duty) 1100 Volts grade with stranded aluminium conductor ,complete all as specified and directed

M&L of Locally available river sand filling in trenches below and above / around UG cable for cable protection, in duct under & above the cables including punning around cable complete all as specified and directed. Note - Punned thickness shall only be measured and paid.

Supplying and laying unreinforced PCC Cable protection cover , Class LV ,Type1 flat ,size 250mm x 150mm x 40mm as cable protection laid flat width wise complete all as specified and directed

Supply and fixing Monoblock pump set suitable for 415 V ,3 phase system having capacity 10 HP,delivery size of 50 mm bore complete all specified and as directed.

Exavation in post hole or smilar hoels each not exe 0.5 cum, getting out returning, filling in and ramming excavation broken rubble in layers not exceeding 25 cm removing surplus soil to a distance n exe 50 m, complete all as specified and directed.

S & F Joist, channel, angle or tee , square or rectangular, tubler sections, fixed indipendently or as purlin , rafter, or post including cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts , providing and fitting angle cleats, fish plates, gusset plates etc, complete all as specified and directed.(Fe-410-W(Gde-E-250) quality A).

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed.

M & L for cement concrete 1:4:8 type D-2 (40 mm graded aggregate) as in sub base, foundations, filling and mass concrete, complete all as specified and directed.

S & F Pre-painted galvalum aluminium zinc coating steel based corrugated/plain steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 Mpa minimum, yeild strength, it shall be coated with hot dip alloy of 55% aluminimum, 43.5% zinc,1.5% Silicon and finished with resin coat on both surface @ 150 gm/ sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and EDPM washers as in roof covering all as directed at site all as specified and dircted. Note- Fixing of sheet can be done in any shape( round/semicircle etc)

M & L 60 mm thick Machine pressed precast concrete interlocking paver blocks including fixing with grey cement and pigments of " I " shape or as approved by GE ,and any colour and size confirming to IS 15658-2006 of M-35 Grade set , laid over 50 mm (average) thick dust sand cushioning,filling of joints with sand & compaction using surface vibrator after filling of joints laid in any pattern as decided by Engineer-In-Charge including packing of sides by cement concrete finishing surfce even and smooth complete all as specified and as directed including demolition of existing surface.

Earth work in soft /loose soil excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. complete all as specified and directed.

M&L Cement concrete type D- 2, 1:4:8 (40mm gradedaggregate) as in sub base of RCC drain complete all as specified and directed.

M&L RCC 1:2:4 (Nominal Mix) (20mm graded stone aggregate) Walls, retaining walls, Culverts ,drains,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Description all as per item No 24 above but 6 mm dia to 8mm and including, spacers and binders

M&L Formwork to faces of walls drains, culverts, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

M & L 5 mm thick rendering on brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement complete, all as specified and directed.

M&L glazed ceramic coloured tiles 450 x 300 x 7 mm thick on vertical surfaces such as dados skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles in Cement mortar 1.4 complete all as specified and directed

M & L for vitrified ceramic tiles 8-10mm thick light shade (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:6 complete all as specified and directed

Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key, scrubbing down with water, any description etc. and removing of the rubbish outside MD land complete all as specified

M&L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for applying 1 mm thick wall care putty on wall on internal old/new wall surfaces as per manufacturer instruction complete all as specified and as directed

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all including washing floors, cleaning glass, joinery electrical fittings, wiring etc, of drops and splashes complete all as per specified and directed

SATHI ENTERPRISES (BID ID -3147830)

M/S GARG CONSTRUCTION (BID ID -3154166)

Bharadwaj Builders (BID ID -3146868)

APconstruction (BID ID -3154186)