WELCOME MAINT AND REPAIR/ MAINT OF SEWER LINE, MANHOLES, CLEANING OF SEWER APPURTENANCES AND SEWAGE LINE IN MARRIED OFFICERS ENCLAVE IN THE AOR OF AGE B/R SP MARG UNDER GE NEW DELHI

Amount

M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornice, pillaster, etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorescent salt and treating oil and greasy spots complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls including complete removal of existing surfaces by using mechanical scrapers and filling holes with putty etc complete all as specified and directed.

M&L for applying one coat of white wash on old decorated surfaces of wall complete all as specified and directed.

-Ditto-, All as per item No. 3.00 above but two coat .

-Ditto-, All as per item No. 1.00 herein before but as on ceiling.

M & L for applying one coat of white wash on old decorated surfaces of ceilings complete all as specified and directed by Engineer-in-Charge

-Ditto-, All as per item No. 6.00 above but two coat .

Complete removal of existing old treatment on surface from walls /ceiling using mechanical scrapper only and filling holes of nails with putty etc.complete all as specified and directed.

M& L one coat of alkali resistant primer over already prepared surfaces of walls (under item No 8.00 above) complete all as specified and directed.

M& L for applying a uniform thickness (average 1 mm thickness) of cement based wall care putty of approved make ( Birla/ JK ) to the entire surface of walls/ ceiling surfaces finished even and smooth complete all as specified and directed.

M& L for applying two or more coats of oil bound distemper on wall surfaces to give an even and smooth surface all as specified and directed.(Note-Payment shall be made for two coats only ) complete all as specified and directed. Make Asian paints (Royale) ICI Dulux /Nerolac paints /Berger (Bishon). Distempering shall be carried by using paint roller through authrosed applicator only.

M & L for applying one coat of distemper oil emulision (O.B.D) white or tinted (As approved) on walls/vertical surfaces including preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed.Distempering shall be carried out using paint roller by authrosied applicator only.

M & L for applying one coat of distemper oil emulision (O.B.D) white or tinted (As approved) on ceiling surfaces including preparation of old decorated surfaces of ceiling by washing, rubbing down and stopping of distempered and painted surfaces complete all as specified and directed.

M & L preparation of old painted surfaces of wood or wood based materials of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

-Ditto- all as per item No 14.00 above but two coat.

M&L for Preparatiopn of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed.

-Ditto- all as per item No 16.00 above but two coat.

M&L for Preparatiopn of old painted surfaces of steel and iron surfaces as in eaves gutter and pipes any description not exe 60 Cm girth including holderbats, distance pieces, etc and applying one coat of synthetic enamel paint all as specified and directed.

M&L for Preparing old painted surfaces of brick,stone,concrete, asbestos cement or plaster surfaces of any description over 10 cm girth or width, not otherwise described and painting with two coats of synthetic enamel paint complete.

M&L for one or more coat of french polish on old surfaces of any description, width or girth incl cleaning and preparing old wooden surfaces complete all as specified and directed.

M&L for taking down cement or cement lime plaster any description incl racking out joints, hacking for key , scrubbing down with water etc including removal of debrish from the MOD land complete all as specified and directed.

M&L for 15mm thick cement plastering, in patches n.exe 3 sq m each, on brick or conc surfaces in CM 1:6 finished even & smooth without using extra cement completed as specified and directed.

M&L for 10 mm thick cement plastering , in patches n.exe 3 sq m each, in CM 1:3 on ceiling / chajjas etc finished even & smooth without using extra cement completed as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M& L for applying two or more coats of oil bound distemper on newly plastered surfaces of walls including a coat of 1 mm thick (average) wall care JK putty to give an even and smooth surface including preparation of new surfaces all as specified and directed.(Note-Payment shall be made for two coats only ) complete all as specified and directed. Make Asian paints (Royale) ICI Dulux /Nerolac paints /Berger (Bishon). Distempering shall be carried by using paint roller through authrosed applicator only.

M&L for touch up of distemper applying ( two or more coat) on walls area of distemper not exceeding 4 sqm ,match to existing shade of wall including preparation existing surface complete all as specified and directed.

M&L for refixing of shutters of any description in same opening after taking down for resecuring ,easing, repairing etc exc 1.0 sqm but n exe 2.0 sqm complete all as specified and directed..

S&F drapery rod of 25mm dia, made of stainless steel Gde 304, having wall thickness 1.40mm including two Nos of brackets and end knob two Nos each fixed in brick/ cement wall including fixed in repairs. Note : Each drapery rod shall be varing from 1.10 to 2.40 mtr length.

M&L for Demolition of stone slabs and tiles of any description or thickness as in floors and aprons etc.laid, bedded and pointed in cement mortar including screed bed of any description and removal of debris complete all as specified and directed.

Dismantling timber scantling as in fillets , rails , post ,rafters, purlins, etc under 40 Sq. cm in section in unframed work complete all as specified and directed.

M&L for Cutting chases in Brick walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed.

M&L for Marble work 18 to 20mm thick, Granite, (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, bedding layer of cement mortar 15 mm thick in CM 1:6 complete all as specified.

M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 3 Sq.cm and not exceeding 6 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.

M&L for Plain fillets of second class hard wood (suitable for joiner’s and carpenter’s work, locally available) section area exceeding 13 Sq.cm and not exceeding 25 Sq.cm, square, rectangular or triangular in section, clean sawn secured with nails complete all as specified and directed.

M&L for Beads of 2nd class hard wood, straight (any size) for glazed or gauged joinery, renewed, including mitres etc,. and removing old beads as in repairs complete all as specified and directed.

Continuous (piano) hinges, mild steel, bright finish or electrogalvanised ,Width of flap (when open), 40 mm complete all as specified and directed.(fixed in repairs)

40 mm dia , cupboard knobs fixed with nut , screw and washer of stainless steel complete all as specified and directed.(fixed in repairs)

Tubular towel rail 20mm dia 'D' type brass chromium plated 60 cm long between flanges fixed complete all as specified and directed.(fixed in repairs)

Ball catcher with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.(fixed in repairs)

Double aluminium channel size 10x20x2mm, complete all as specified.(fixed in repairs)

MS roller with "C" shape stapple, chromium plated for 5.00 mm thick sheet glass, complete all as specified and directed.(fixed in repairs)

M&L for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples and fixed in repairs complete all as specified and directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in CB shutter, showcase frame, shelves, with 6 mm thick teak wood liping alround incl polishing to lipping and all as per specified and directed.(fixed in repairs)

M&L for Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/450x300mm/300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer complete all as specified and directed.

M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed.

M&L for light shade Vitrified ceramic tiles 10 mm thick ( square / rectangular) polished , area of each tiles not exe 0.36 sqm , in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement incl incl screed bed or bedding 15 mm thick in CM 1:6 for laying floor finished complete all as specified and directed.

Ditto - as all as per item No. 48.00 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Glazing with plain sheet glass, ordinary quality, 4 mm thick and glazing with oil putty or aluminium or PVC / wooden beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

M&L for Glazing with 5.5mm thick sheet glass, ordinary quality, of any size as in aluminium window and including grinding of edges for showcase sliding shutter and shelves incl fixing brackets complete complete all as specified and directed.

M&L for Glazing with figured glass (Frosted), pin head type, 4 mm thick and glazing with oil putty or aluminium or PVC beading in squares not exceeding 0.5 Sq.m in each pane complete all as specified and directed.

M&L for Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads or from metal frames including punching or drilling out old glazing pins /spring clips and providing and fixing new one.

Taking up or down steel tubing and connection incl cleaning for refixing or removal to store for 15 mm dia pipe complete all as specified and directed.

M&L for Mild steel galvanized steel tubing of 15 mm bore with screwed socket joints as in concealed /open pipe work , medium grade, together with all fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors complete all as specified and directed.

M&L for Bib taps, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed down screwed for iron pipe, 15 mm bore complete all as specified and directed. (fixed in repairs)

Bib tap, 15 mm bore, stamdard of PTMT any colour high pressure screwed for iron pipe and fixed in repair.

Brass chromium plated toilet paper holder, fixed to wall with CP brass screws complete.(fixed in repairs)

Stop valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete (fixed in repairs) .

Stop valves(angle valve type), cast copper alloy, fancy type chromium plated of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete (fixed in repairs) .

PVC connections 15 mm size with PTMT nuts of length 600 mm. (fixed in repairs)

Toughened glass, 5.5mm thick, bathroom corner shelf of size 300mm with stainless steel railing and stainless steel fasteners fixed on wall complete (fixed in repairs)

Vitreous China wash down water closet pan (Pedestal Pattern) and trap (standard pattern) white including fixing bolt complete as fixed in repair.

Plastic water closet seat, white , closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing (fixed in repairs) complete.

PVC (Plastic polymer Cistern) valve less, Syphonic action type, flushing cistern of capacity 10 liters, low level, White with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete including taking down by dismantling the existing unserviceable cistern of any description complete all as specified and directed.

Health faucet Chromium plated brass with 1.50 m long flexible pipe for WC .(fixed in repairs)

M&L for Vitreous, China wash basin, white , flat back , size 550x 450mm excluding taps, waste chain and plug and porcelain stopper but including the brackets, 32mm dia brass chromium plated waste coupling and PVC waste pipe complete all as specified and directed.(fixed in repairs)

M&L for Sink with drainage board made of stainless steel 1 mm thick kitchen sink with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including cantilever bracket and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm inculding taking down the old sink of any description complete all as specified and directed.

Brass CP mixer (Central hole basin mixer) , for mixing hot & cold water screwed down for iron pipe 15 mm bore complete all as specified and directed. (fixed in repairs)

M&L for PVC mirror cabinet of size 330 mm x 430 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete (fixed in repairs) all as specified and directed.

M&L for Brass chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.(fixed in repairs)

M&L for Glass self assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromoium plated bracket guard and railing 60 cm long complete all as specified and directed.(fixed in repairs)

M&L for Brass chromium plated shower rose with swivel joints, 125 mm dia with CP neck including fixing to steel pipe or union 15 mm nominal bore complete all as specified and directed. (fixed in repairs)

Demolition of cement concrete of any description and in any position, provided for and removing rubbish out of MoD land complete all as complete all as directed.

Supply only water proofing compound (PIDIPROOF-LW PLUS) or equivelent.

M & L for Plain cement concrete (1:5:10) type E-2 using 40mm brick course aggregate as in filling under floor as in sunken portion complete all as specifed and directed.

M&L for 40mm th PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) as in flooring, finished fair and even, mixed with water proofing compound Dr FIXIT PIDIPROOF-LW PLUS or equivalent (as per manufacturer's instruction) as approved by GE complete all as specified and directed.( Note : WPC shall be measured and paid separately.)

M&L for 15mm thick cement plastering on brick or conc surfaces in CM 1:3 finished even & smooth without using extra cement mixed with water proofing compound Dr FIXIT PIDIPROOF-LW PLUS or equivalent (as per manufacturer's instruction) as approved by GE complete all as specified and directed.( Note : WPC shall be measured and paid separately.)

S & F spun cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint laid in trenches or floors, including tacking down old unserviceable CI pipes complete all as specified

S & F spun cast iron soil, waste and vent pipe, 75mm bore, in any length with or without ear with cement joint fixed to wall on any height of building incliding tacking down old unserviceable CI pipes complete all as specified

S & F spun cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint laid in trenches or floors, including tacking down old unserviceable CI pipes complete all as specified

S & F spun cast iron soil, waste and vent pipe, 100mm bore, in any length with or without ear with cement joint fixed to wall on any height of building incliding tacking down old unserviceable CI pipes complete all as specified

S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 75mm bore pipe complete all as specified and directed.( Fixed in repair)

S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed.( Fixed in repair)

S & F CI bends 75mm dia (any radius), diminishing pieces or tapers( larger bore measured), with oval access door complete all as specified and directed.( Fixed in repair)

S & F CI bends 100mm dia (any radius), diminishing pieces or tapers( larger bore measured) with oval access door complete all as specified and directed.( Fixed in repair)

S & F CI bends 100mm dia (any radius), with duck's foot or heel rest complete all as specified and directed ( Fixed in repair)

S&F 100mm bore CI branch pieces,single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches,with oval access door complete all as specified and directed. ( Fixed in repair)

S&F CI nahani trap with grating including jointing to waste pipe , dia of outlet 75mm fixed in PCC 1:2:4 type B1 all as specified and directed. (ISI Marked)

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls including tacking down PVC pipe complete all as specified & directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. including tacking down PVC pipe

S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.

S&F 75mm PVC(SWR) bends any radius complete all as specified and directed.

M&L for Glazed ceramic walls tiles coloured (300 x 200 mm/350x250mm/450x300mm/300x450), 6/7mm thick, for works on vertical surfaces such as skirting/dados of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces or other than fair faces of brick work in cement mortar 1:4, finished even and fair as in backing layer including dismantling existing broken/cracked tiles including removing rubbish off the premises complete all as specified ( To match size of existing tiles).

M&L for Non skid ceramic floor tiles 7 to 8 mm thick (square/rectangular) coloured , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, of 1st quality , set and jointed in neat cement slurry and pointed in coloured cement to match laid over screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes including dismantling broken/cracked tiles and removing of rubbish off the premises complete all as specified and directed.

M&L for light shade Vitrified ceramic tiles 10 mm thick ( square / rectangular) polished , area of each tiles not exe 0.36 sqm , in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement incl incl screed bed or bedding 15 mm thick in CM 1:6 for laying floor finished including dismantling broken/cracked tiles and removing rubbish off the premises complete all as specified and directed.

Ditto - as all as per item No. 97.00 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for touch up of distemper (applying two or more coat ) on walls area of distemper exceeding 4 sqm not exceeding 12 sqm ,match to existing shade of wall including preparation existing surface complete all as specified

S&F in repairs stainless steel plate rack of size 900 X 775 X 250 mm, made out of 1.00 mm thick steel sheet fixed to walls incl rawl plugs, drilling etc complete incl taking down old wooden plate rack of make- Shakti model No KR-567 complete all as specified and directed..

M&L treating at points of contact of wood work by chemical emulsion ( in oil or kerosene based solution) @ 0.50 Ltr/hole by drilling 6 mm dia holes at the down ward angle of 45 degree a 150 mm centre to centre and sealing the same to match the specification of existing finishes complete all as specified and directed.

M&L taking down existing steel rolling shutter incl hood cover pull & push type not exc 12 Sqm area of clear opening and cleaning the sides of shutters suspensions shafts,anti-guide channels and greasing all the moving parts of rolling shutters and straightening rolling shafts and replacement of any necessary parts required to make the shutters moving smoothly and entire rolling shutters shall be made functional upto the entire satisfication of Engineer -in-Charge and refixing the same incl hood cover complete all as specified and directed.

S&F in repairs floor door stoppers of aluminium alloy body and tounge, anodised,with hard drawn steel spring over all length of cover plate is 140 mm complete all as specified.

S&F in repairs aluminium anodised hook and eye of 200 mm long complete all as specified and directed. Note :- The rates for these items deemed to be included for cleaning of complete house such as floor(includes application of pouncha with wet cloths), removing of all spots on door, window and wall and floor tile in kitchen and bath room after distempering/painting, cleaning of glass paes for door & windows including garges shutters & its shutter proper and over cover the furniture properly during OBD & painting of tarpoline cover paints in different room and lay out of all furniture items proplerly after completion of entire process complete all as specified and directed by Engineer In Charge.

Excavating in trenches in any type of soil, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation for manholes / shafts or sewer line etc and getting out all as specified.

Excavating in trenches in any type of soil, not exceeding 1.5m wide, exceeding 1.5m in depth but not exceeding 3.0 m in depth for foundation for manholes / shafts or sewer line etc and getting out all as specified.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, bore of pipe 150mm.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, bore of pipe 200mm.

M & L Salt glazed stone ware ( SGSW ) drain pipes, Grade ‘A’ 150 mm bore, laying level or to falls in trenches, on concrete bed or directly on hard grounds and making joints and testing complete.

M & L Salt glazed stone ware ( SGSW ) drain pipes, Grade ‘A’ 200 mm bore, laying level or to falls in trenches, on concrete bed or directly on hard grounds and making joints and testing complete.

M & L Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregrate) in concrete bed to drain pipes including packing under and haunching against the sides of pipe of 150 mm bore after they are laid and tested.

M & L Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregrate) in concrete bed to drain pipes including packing under and haunching against the sides of pipe of 200 mm bore after they are laid and tested.

Returning filling in including spreading levelling, watering and well ramming soil in layers n. exc. 25 cm thick complete all as specified.

Removing excavated materials/surplus soil out side of defence land up to a total distance of 1.5 Km complete all as directed by Engineer-in-charge.

Demolition of brickwork stone/boulder masonry built in cement mortar including all quoins, pillars etc by breaking up or down, separation of serviceable material from the unserviceable, stacking the serviceable material within 100m of place of work and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m all as directed.

M & L for brick work with sub class B bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 all as specified and directed.

M & L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggragated) as in benchning, copings, channels, slightly chamfered or rounded on edge including necessary use of form work complete all as specified & directed at site.

Rendering 15 mm thick in cement mortar 1:4, on fair faces of brick work or cement concrete surfaces, finished even and smooth without using extra cement.

Taking down cement plaster on brick wall any description incl raking out joint, hacking for key, scrubbing down with water complete.

M&L cleaning, flushing of chocked and de-silting of outdoor sewage lines n.exc 300mm internal diameter of any depth upto three meter . The cleaning shall be carried out with mechanized operation by means of diesel/electric operated vehicle mounted hydraulic operated high pressure suction cum jetting machines fitted with pump of requisite capacity and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal sites. The sludge deposited in the sewage line shall be fully cleaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipments and with strict supervision complete all as directed. Note:- (a) The service provider/contractor during the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc alonwith the sewage cleaning truck mounted suction/jetting machine. (b) Manual cleaning operation/scavenging is prohibited. (c) The unit rate quoted by the contractor shall interalia deem to include the cost of proviiding skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc (d) The effective length of pipe for the purpose of payment shall be excluding the length of manhole.

Desluding of existing chocked manholes of depth upto 2.5 m for liquid,solids and slurry material by machanical means using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 Ltr and suction tank capacity of 300 Ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc outside the MOD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading, digging out pit of any size in any type of soil, surring sludge/silt/spoil/mud etc into the pit and spraying bleaching powder over the entire surface complete including taking of the manhole cover for the entire process as above and replacing the manhole cover in its position. Note :- (a) The service provider/contractor during the mechanized operation shall be equiped with gas monitor, nylon rope ladder, torch light and compressor blower etc alonwith the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanized operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal sites. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour (skilled/unskilled), tools and plants and requisite quantity of water for the entire operation and transportation arrangements. (e) The sludge so removed shall include the cost of dewatering also.

Demolition of RCC manhole cover slabs and similar suspended work incl(reinforcement cut as required to facilitate demolition)

MS framed brackets of angle iron or of flat iron with hold fasts etc as directed incl necessary welding etc complete for manholes and covers confirming to Fe-410-0 or Fe-310-0.

S&F precast polycrete plastic fibre reinforced concrete(PFRC) rectangular manhole cover (medium duty) with 60 to 75 mm thick, confirming to IS: 12592 and IS:1726, factory made area exc 0.50 sqm but n exc 0.75 sqm on any side complete all as specified and directed by Engr-in-charge.

S&F precast polycrete plastic fibre reinforced concrete(PFRC) circular/rectangular/square cover for gully traps (light duty) with frame of size 450 to 550mm, 40 to 50 mm thick conforming to IS: 12592 and IS:1726, factory made complete all as specified and directed by Engr-in-charge.

Cast iron floor trap of size 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4:), fixed in repair.

S&Fin reparis Salt glazed stoneware gully trap, rectangular mouthed, 180x150mm, type 'P' including necessar excavation and earth work in any kind of soil, set in Plain Cement Concrete 1:2:4 , type B-1 (using 20mm graded crushed stone aggregrate), cast iron grating and setting and jointing to drain with cement mortar 1:1

Dismantling of cast iron or reinforced concrete drain pipe 100&75mm bore,jointed in cement mottor and taking out of treanches if required

S&F Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints,laid in trenches or in floors of size 100 mm bore

S&F Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints,laid in trenches or in floors of size 75 mm bore

S&F Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints, fixed to wall, of size 100 mm bore

S&F Cast iron soil,waste and vent sand cast pipes pipes in any length with or without ears,with cement joints, fixed to wall, of size 75 mm bore

S&F Cast iron bends (any radius) with ducks foot or heel rest.of size 100mm bore of pipe.

S&F Cast iron bends (any radius) with ducks foot or heel rest.of size 75mm bore of pipe.

S&F PFRC circular manhole (medium duty) cover with frame of size 551 to 650 mm dia conforming to IS: 12592 and IS:1726, factory made complete all as directed and as approved by Engr-in-Charge

S&F cast iron branch piece, single ( equal or unequal) ordinary or inverted ( spigot or socket type) or with parallel branches, tee and similar items of 100 mm internal dia complete all as specified and directed.

S&F cast iron bends ( any radius) diminishing pieces or tapers ( larger bore measured) of 100 mm internal dia complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description as in ground floor / paving not exc 15 cm thick above or below ground level and removing rubbish off the premisses .

M&L cement concrete type C-2, 1:3:6 ( 20mm graded stone aggregate ) , 75 mm thick as in plinth protection , finished cement concrete surface even & smooth without using extra cement complete all as specified and directed .

S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 75mm bore pipe complete all as specified and directed.( Fixed in repair)

S&F stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed.( Fixed in repair)

M&L cutting into existing manholes for connecting new drains, making good to pipes and renderning, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching as required for 150 mm internal dia of pipes.

M&L cutting into existing manholes for connecting new drains, making good to pipes and renderning, cutting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching as required for 200 mm internal dia of pipes.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L machine pressed pre cast cocrete interlocking decorative paver block PU coated of any size and shape confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and no pigment, size and shape of paver as approved complete all as specified and directed.

M/S Sunil Steel Works

Simran construction Company

JIWAN DASS THAREJA AND SONS

SK Engineers