Loading…
Loading…
Tender Value
₹1.5 Cr
EMD Value
₹7.6 L
Closing Date
14 May 2026, 5:00 pmClosed
Dr. Sister Maria Rashmi A.C
PRINCIPAL
Avila Convent, Bailey Road, Patna- 800 001, Bihar, India
Dr. Sister Maria Rashmi A.C
Principal
Contruction of floor in M.Block of Patna Women's College. Details in RFP.
129576
PWC/PMUSHA/C/01
Open Tender
CIVIL
Patna
• 1. The PATNA WOMEN'S COLLEGE (AUTONOMOUS) invites e-tenders through Bihar Government Centralized e-Procurement Portal for execution of Construction of Floor above M.Block under PM-USHA Scheme. The works aim at strengthening academic infrastructure, research facilities, and gender inclusion initiatives within the institution.
CIVIL
ITEM RATE
L1
1
8 documents required · 8 mandatory
₹10,000
Processing Fee: 3540
₹7.6 L
Yes
22 Apr 2026
22 Apr 2026
15 May 2026
22 Apr 2026
14 May 2026
22 Apr 2026
Metre
metre
Brick work with bricks of class designation 100A in
Half brick masonry with bricks of class designation 100A in superstructure above pinth level upto floor V level
Extra for providing and placing in position 1 no. 6mm dia, MS bars at every fourth course of half brick masonry
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both
Providing and fixing aluminium sliding door bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with nuts and screws etc. complete:
Providing and fixing aluminium tower bolts ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
Providing and fixing aluminium hanging floor door stopper ISI Marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc.
Providing and fixing bright finished brass 100mm mortice latch and lock with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS:1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality).
Providing and fixing steel glazed doors, windows and ventilatrs of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with woodenplugs and screws or raw) plugs and screws or with fixing dips or with bolts and nuts as required, including providing and fixing of glass panes with glazing dips and special metal-sash putty pf approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required.
Extra for providing and fixing steel beading of approved shape and section with screws instread of glaxing clips and met. Sash putty in steel doors, windows, Ventilators
metre
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare
Forming groove of uniform size from 12x12mm and upto 25x15mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge.
Providing and fixing water closet squatting pan (Indian type W.C pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required:
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lif, 10 litre low level white vitreous china flushing cistern
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x
Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth.
Provding and fixing 600X450mm beveled edge mirror of superior glass complete with 6mm thick hard board ground fixed to wooden cieats with CP brass screws & washers complete.
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms.
Providing and fixing PTMT towel ring trapezodial shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms.
Provding and fixing Toilet Paper.holder
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Metre
Metre
Metre
Metre
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Metre
Metre
Metre
Metre
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
Metre
Providing and fixing gun metal gate valve with C.I. wheel of approved quality.
Providing and fixing uplasticised PVC connection pipe with brass unions.
Providing and fixing gun metal non-return valve of approved quality (screwed end).
Providing and fixing G.I. union in G.I.pipe including cutting and threading the pipe and making long screws etc.
Providing and fixing C.P. brass bib cock of approved quality conforming to IS :8931.
Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
Providing and fixing PTMT grating of approved quality and colour.
Constructing masonry Chamber 60 x 60 x 75 cm inside, in brick work in cement mortar 1:4(1 cement: 4 coarse sand) for sluice valve, with C.I surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) i/c necesary excavation, foundation concrete 1:5:10( 1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3( 1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:
Providing and fixing at all heights and depths between beam , coloumn and foundation 50 MM thick DURABOARD HD-100 conforming to BIS 1838 Part 3 including cost and conveyance of all materials, cutting and placing to the required size, labour charges, sundries, wastage etc. at all levels complete as per drawings and as direction and satisfaction of Engineer-in-charge. DURAboard HD 100 will become one side of the shuttering while the expansion joint is being created.
Wiring for submain with 2x6 sq.mm +1X6 sq mm earth wire FRLS PVC insulated copper conductor single core cable in recessed PVC conduit as required.
Wiring for circuit wiring with 2x2.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit alongwith 1 No 1.5 sq mm FR PVC insulated copper conductor single core cable as required.
Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 Sq.mm FRLS PVC insulated copper conductor cable in recessed PVC conduit with modular switch modular plate suitable GI box earthing the point with 1.5 sq mm FR PVC insulated copper conductor single core cable etc as required.
Supplying and fixing 6 way double door single pole and Neutral sheet steel M.C.B. D.B, 240 Volts in recess, complete with tinned copper busbar, neutral bus bar, earth bar, din bar , detachable gland plate, interconnection, phosphatized and powder painted including nting, earthing etc. as required ( But without MCB/ RCCB/Isolator)
Supply and Installation of 300mm sweep metallic blade, heavy duty, single phase, 230 A.C. exhaust fan in the existing opening including making good the damage connection testing commissioning etc. as required.
Supplying and fixing single wall mounted 9/10watt (2 ft. long) LED type batten fitting complete with electronic driver and LED tube etc. directly on wall including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor single core cable and earthing the body etc. as required. (Mirror Light)
Supplying and fixing surface mounted 18 watt LED downlighter with minimum efficacy 100lm/w in pressure die cast aluminium housing and integrated electronic driver etc. directly on ceiling including connection with 1.5 sq mm FRLS PVC insulated copper conductor cable etc as required.
Supplying and fixing 10/12 watt LED type bulkhead luminaire with minimum efficacy 100lm/w in comprising of pressure die cast housing, acrylic diffuser,IP 65 protection and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated, copper conductor single core cable etc. as required.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
C-01- Construction of Third Floor Main Block.pdf
NIT • 2.03 MB
C-01- Construction of Third Floor Main Block.pdf
NIT • 2.03 MB
10. BOQ - Construction of Main Block.xls
NIT • 0.09 MB
Download all tender documents and submit your bid