Loading
Loading…
Loading…
Tender Value
₹4.1 L
EMD Value
₹8,206
Closing Date
24 Sept 2026, 11:00 am3d left
EEPH Divn No. 3 Chd
EEPH Divn No. 3 Chd
Providing and fixing of various boosting arrangement, water supply sysem and other allied works for various NRB Sector 27 to 30 (under mtc. booth Sector 27) Chandigarh. (Ch. to 2215 (N.P) NRB)
2026_CHD_95377_1
PH3/2026/410
Open Tender
Public Health Products
Percentage
120 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹8,206
24 Sept 2026
11 Sept 2026
24 Sept 2026
11 Sept 2026
24 Sept 2026
11 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4 | |||||
| 1.1 | Cement mortar 1:6 (1 cement : 6 coarse sand): DSR 6.4.2 | 3 | cum | 8,860.09 | ₹26,580.27 |
| 212 mm cement plaster finished with a floating coat of neat cement of mix : DSR 13.7 | |||||
| 2.1 | 1:4 (1 cement: 4 fine sand) | 10 | Sqm. | 414.06 | ₹4,140.6 |
| 3Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): DSR 18.17 | |||||
| 3.1 | 50 mm nominal bore: DSR 18.17.4 | 3 | each | 998.93 | ₹2,996.79 |
| 4Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): DSR 18.46 | |||||
| 4.1 | 50 mm nominal bore: DSR 18.46.6 | 3 | each | 337.44 | ₹1,012.32 |
| 5 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | 2,000 | Ltr | 10.7 | ₹21,400 |
| 6 | Providing & fixing IRC encloser jali of mesh size 40 mm x 40 mm of 10 gauge with frame work of MS angle 40x40x5 mm and MS flat 32x5 mm including painting with two coats of synthetic enamel paint over a coat of steel arrangeent all as specified. (Size of angle grid should not be more than 12 sft) with two coats of black paint as per site requirement as desired by EIC | 600 | Sft | 172 | ₹1,03,200 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 10.10 MB
BOQ_117150.xls
BOQ • 0.49 MB
pp.pdf
PDF • 0.17 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .