Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.6 LAccepted-Finance | L1 | Accepted-Finance ok | |
| 2 | L2₹5.6 L+₹1,625.50 (0.29%)Accepted-Finance | L2 | Accepted-Finance ok |
Tender Value
₹6.4 L
EMD Value
₹12,759
Closing Date
2 Sept 2022, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
MGD-I, CWC, Jaltarang Bhawan, Aliganj, Lucknow, 226024
Renovation of Conference Hall of Janhavi Sadan Building under O/o Chief Engineer, UGBO, CWC, Lucknow
2022_CWC_708803_1
NIT-04/HQ-02/MGD-1/LKO /2022/2049-54 Date 26/08/22
Open Tender
Miscellaneous Works
Works
60 days
O/o Chief Engineer, UGBO, CWC, Indira Nagar LKO
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹12,759
Yes
6 Oct 2022
26 Aug 2022
3 Sept 2022
26 Aug 2022
2 Sept 2022
26 Aug 2022
Amount
Providing & fixing decorative high pressure laminated sheet of plain/ wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (1.0 mm thick)
Providing and fixing plain lining with necessary screws/ nuts & boats/ nails, including a coat of approved primer on one face, and fixed on wooden / steel frame work. Complete as per direction of Engineer-in- charge (Frame work shall be paid for separately).12 mm thick commercial ply conforming to IS : 1328 BWR type.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm
Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours & shades, in skirting, riser of steps, over 12 mm thick bed of cem,ent mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
Providing and fixing false celling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the celling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the celling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of the ceiling fixed to wall/ partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufactures specification and also including the cost of making oipenings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095- (Part I) : 2011 (Board with BIS certification marks)
Dismantantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles above 25 mm and up to 40 mm
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in- Charge
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or wasre materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer- in- Charge, beyond 50 m initial lead, for all leads including all lifts involved.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Alumninium snap beading for glazing/ paneling, C/P/ brass/ stainl;ess steel screws, all complete as per architectural drawings and the directions of Engineer- in- Charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the dirextions of Engineer- in - charge. (Cost of aluminium snap beading shall be paid in basic item) :With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
Fillling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer- in- charge complete Upto 5mm depth and 5 mm width
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge. Pre-laminated particle board with decorative lamination on both sides
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Supplying and commissioning one piece of frameless glass door of required size of 15-20 mm thick including the cost of transportation, fixing, door closer, hinges, door handles etc and all complete as per direction of engineer-in-charge.
Installation, commissioning & testing of available Audio Video Conference System in Conference Hall including the cost of cutting of wall/floor/table, coduit pipe, wire, electric modular board, socket & switches etc as required and as per direction of engineer-in-charge, all complete.
Dismantling of split type air conditioner of 1.5 ton, ceiling fan and tubelight and re-installing them to as directed by engineer-in-charge all complete.
Supply, installation, commissioning & testing of deep LED fittings of 6 inch size in round/square shape or as required and as per direction of Engineer-in-Charge including the cost of wire, cutting of holes, wiring with the switch board etc all complete.
Dismantling of electric switch board/LED TV/other equipments and after installing them on after pre laminated particle board fixing at its place as per direction of Engineer-in-Charge including the cost of screw, additional switch and socket board if required, PVC conduit, cutting of wall and wire alongwith conection of available inverter as per direction of engineer-in-charge, all complete.
H. D. GROUPS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .