Air-conditioning work

Amount

SITC of 8.5 TR cap[acity Microprocessor based air cooled ceiling suspended Ductable type Split Air Conditioner of rated cooling capacity of 102000 BTU/Hr equipped with scroll compressors with R410A Refrigerant, air cooled condensor, DIDW blower, evaporator coils with copper pipe, filter for evaporator, microprocessor controller and other standard accessories suitable for operation on 400Volt, 50Hz, 3 PH AC supply. (Make : Mitsubishi/O General/ Hitachi)

SITC of 5.5 TR cap[acity Microprocessor based air cooled ceiling suspended Ductable type Split Air Conditioner of rated cooling capacity of 66000 BTU/Hr equipped with scroll compressors with R410A Refrigerant, air cooled condensor, DIDW blower, evaporator coils with copper pipe, filter for evaporator, microprocessor controller and other standard accessories suitable for operation on 400Volt, 50Hz, 3 PH AC supply. ( Make : Mitsubishi/O General/ Hitachi)

Supply & delivery of 1.5 ton capacity 3 Star rating Split type Air conditioner with Hyper Tropical - Rotary Compressor, 19500 Btu/h,(max) Rated Cooling Capacity 5715Watt, Indoor unit Airflow 1150/m3/hr., Super turbo DC Fan Motor Speed Auto/High/ Medium/ Low/Dry, Refrigerant R-410A, 5 point Multi port Refrigerant inject coil, Refrigerant control, both condensing & cooling coil must be made in copper tubes. Main power supply must be in outdoor unit of 220 volt. [Make O-General ASGA18FTTC(R410)/ Mitsubishi Heavy Duty SRK21CNS-S6(R410)]

SITC of copper Refrigerant pipe line fo following dia for liquid and suction line with hard drawn copper piping with all necessary fittings, supports & brackets including wraping the same properly after insulation.

22.2mm OD with minimum thickness 1.15 mm with 9mm thick Nitrile Insulation.(Make: Rajko/Royku/Mandev)

12.7mm OD with minimum thickness 1.15 mm with 9mm thick Nitrile Insulation.(Make: Rajko/Royku/Mandev)

Supply & laying 32mm dia 'U' PVC Drain pipe with necessary fittings, clamps, supports including insulation (Supreme / Oriplast)

SITC of GSS SA duct fabricated with GI sheet following guages complete with necessary MS supports as required & turning vanes etc complete as per IS 655 ( Make : Sail/Jindal)

22 SWG galvanised Ducting

24 SWG galvanised Ducting

S/F Accoustic lining of duct work with 12mm thick, 48kg/mtr3 density rigid board inside wwith 300 Fibreglass RP Tissue pasted with shalikote primer hot bitumin and mechanically fastended, covered with 28G aluminium perforated sheet ( Make: Twiga)

S/F Thermal duct insulation with 10mm thick fire ratardant aluminium foil faced nitrile rubber insulation of class 'O' over the Supply air duct with necessary pasting after the accoustic portion ( Make : Accoflex/ Supreme)

Supply and Instalaltion of Duct Damper ( Make : Dynacraft/Premier/Systemair)

SITC of motorized fire damper incl. Acuator control panel and all other required accessories. Damper should be compatible with existing fire detection panel and should accept potential free cotact for operation (Make - System Air / Premier / Dynacraft)

Supply and fixing flexible fire retardant double canvas connection for ductable split air-conditioner.

S/F Al powder coated diffuser without VCD for for return air ( Make : Dynacraft/Premier/Ravister)

S/F Al powder coated diffuser Grill with VCD for supply air Make : Dynacraft/Premier/Ravister)

FRAME WORK: Supply, fabrication & fixing of 2 nos. M.S 'U' Channel of 6mm thick of size (75mm x 40mm x 40mm) of 1m length for making platform for installation of outdoor unit incl. drilling 2 nos. hole in each channel including making necessary arrangement as per site condition as per direction of EIC.

Supply Installation of VI pad for ODU Unit

S/D unarmoured PVC insulated stranded copper wire Communication control cable of size 3 core 2.5sq.mm from Condensing Unit to control panel as per direction of EIC. ( Make : Finolex, Gloster, Havells)

Supply & Charging R410A Refrigerant Gas

Lifting, shifting of outdoor unit upto rooftap of existing building by chain pully arrangement

The Agency must procure the materials from the Manufacturer/OEM or from their authorized sales channel so that the standard warranty/supprot of the Manufacturer/OEM becomes applicable to the products to be delivered and installed by them.

Documents that authenticates such procurement from the Manufacturer/OEM or from their authorized sales channel and standard warranty/support should be sent from the e-mail of the Manufacturer/OEM/authorized sales channel to the e-mail of Engineer-in-Charge and hard copy of it to be submitted during execution of work/submission of bill.

If any refurbished material is supplied and installed, penal action will be taken as per existing rules.

Lyric International

HIMAYAN

P. M. COOLING AND ENGINEERING CO