SPECIAL REPAIR TO BLDG NO P-159, P-472 WORKSHOP REPAIR BAY AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion: - Taking down chowkhats or frames with shutter without taking off shutter from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each including cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and as directed.

Taking down chowkhats or frames with shutter without taking off shutter from the frame not exceeding 1.5 Sqm each including cutting holes for taking out hold fast or dismantling brick (holes cut and any other damage to jambs, wall for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) complete all as specified and as directed.

Taking down door and refixing shutters after making necessary repair of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed. Note: - Builder's hardware used in repairs shall be measured separately.

Supply and fixing 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR part-I section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fixing factory made, 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated 35mm thick complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails mild steel frame shall be covered with heat moulded plain cover PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification clause No 8 B.1 to 8 B.10 and drawing on page No 174 of MES SSR-2020 Pt-II complete all as specified and directed.

Supply and fixing box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick mild steel sheet tube factory made with double side shutters wire gauged shutter and glass glazed shutter (wire cloth and glass panes will be measured and paid separately) with side hung shutters with mild steel handles and mild steel peg stay dovetailed or welded including 02 No's mild steel tower bolts 150 mm long for each leaf and 08 mm square bar grill / guard bars at spacing as shown on drawing welded mild steel flat iron frame work, including other fittings, hinges, mild steel handles, tarred hold fasts, PCC blocks for hold fasts etc complete all as specified and as directed.

Supply and fixing box type steel ventilator comprised of tubular frame and shutters made out of 1.25 mm thick mild steel sheet tube factory made with fixed type wire gauged shutter (wire cloth and glass panes will be measured and paid separately) with side hung shutters with mild steel handles and mild steel peg stay dovetailed or welded including 02 No's mild steel tower bolts 150 mm long for each leaf and 08 mm square bar grill / guard bars at spacing as shown on drawing welded mild steel flat iron frame work, including other fittings, hinges, mild steel handles, tarred hold fasts, PCC blocks for hold fasts etc complete all as specified and directed.

Supply and fixing in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with rails / wooden beading / steel staple complete all as specified and as directed.

Material and labour for framed work such as grills, grating, etc with ends of bars shouldered, cooler stand, railing and similar work; framed guard bars, conforming to Fe 410-0 or Fe-310 complete all as specified and as directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square pane complete all as specified and as directed.

Supply and fixing 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fixing 100mm long butt hinges, medium weight cold rolled mild steel (ISI marked) complete all as specified and as directed.

Supply and fixing in repair 140mm size (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Supply and fixing in repair helical door spring 200mm including roller and roller plate complete fixed with welding to existing steel chowkhats complete all as specified and as directed.

Supply and fixing 150mm long aluminium handle extruded alloy, fabricated 'D' type anodised complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10cm width or girth complete all as specified and as directed.

Material and labour for preparation of old wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down cement plaster / wall tiles from concrete / stone surfaces including racking out joints, hacking for key, scrubbing down with water etc and its removal from site complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM (1:6) finished even and smooth without using extra cement (internal plaster) complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM (1:4), finished even and smooth without using extra cement (external plaster) with water proofing compound complete all as specified and as directed. Note: - (i) All rendering shall be upto 3 floor roof of building and necessary scaffolding shall be included in the rate. (ii) Water proofing compound shall be paid separately.

Material and labour for 10 mm thick plaster on ceiling in cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of new surfaces of wall and applying two coats of Oil bound distemper white or tinted including 1 mm thick wall care putty complete all as specified and as directed.

Material and labour for applying three coats of white wash on ceiling including preparation of newly plastered surface complete all as specified and as directed.

Complete removal of existing treatment of old decorated surfaces of wall and applying two coats of distemper oil emulsion white or tinted including 1 mm thick wall care putty complete all as specified and as directed.

Preparation / scrapping the existing surfaces of walls including cornices, making good holes with chalk whiting, filling cracks etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall, soffits / facia etc and applying two coats of cement based paint complete all as specified and as directed.

Material and labour for preparation of old decorated surfaces of walls, soffits / facia of chajja / roof slab etc and applying one coat of cement based paint complete all as specified and as directed.

Material and labour for applying two coats of wheather proof paint exterior grade over one coat of wall care putty including all scaffolding arrangement up to four storeyed building complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall and applying one coat of exterior grade emulsion paint on walls etc complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and applying neat cement slurry @ 3 Kg / Sqm complete all as specified and as directed.

Supply and fixing coloured non skid ceramic tiles joint free 7 to 8 mm thick (Square / rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM (1:6) complete all as specified and as directed.

Supply and fixing coloured glazed ceramic tiles in vertical surface 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement ot match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour machine cut Kota stone 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding of open edge, rubbing and polishing complete (mirror face) as in floor, over 20 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour granite 20 mm thick (table rubbed and polished) as in platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed in CM (1:4) edges of slab to be rounded from all sides (including cutting and polishing) complete all as specified and as directed.

Taking down 15 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Taking down 20 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Supply and fixing 15 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and as directed.

Supply and fixing 20 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position of 15 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position of 20 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and as directed.

Supply and fixing in repair 15mm bore stop valves, cast copper alloy (ISI marked) screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions complete all as specified and as directed.

Supply and fixing in repair 20mm bore stop valves, cast copper alloy (ISI marked) screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) for iron pipe or for unions complete all as specified and as directed.

Supply and fixing in repair angle valves chromium plated screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and as directed.

Supply and fixing in repairs 15mm bore pillar cocks chromium plated brass with capstan head screwed down high pressure complete all as specified and as directed.

Supply and fixing in repair bib taps, fancy type chromium plated, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Supply and fixing in repairs chromium plated brass towel rail fancy type 600mm long fixed with chromium plated brass screws complete all as specified and as directed.

Supply and fixing in repairs ISI marked 500 litre capacity rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top three layer) hoisted and fixed in position all as specified in SSR Part I including PTMT Ball valves 20mm bore, high pressure with epoxy coated aluminium rod and high density plastic ball etc complete all as specified and as directed.

Supply and fixing in repair Vitreous china squatting pan 'Orissa' pattern' size 580 x 440mm white, with integral foot rest 'P' or 'S' trap, front or back inlet including connection to trap and to flushing pipe, anti-syphonage pipe, etc complete making good to floor as existing complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repairs Vitreous china wash hand basin white, flat back of size 550 x 400mm with PVC connection (15 x 450)mm long with PTMT nuts and PVC washer and including cutting for pinning in ends, pair of cast iron brackets and provision of PVC waste pipe 32mm of adequate length, chromium plated waste coupling 32 mm dia of half or full threaded, chromium plated fancy type angle valve 15 mm dia bore and taking down unserviceable wash hand basin complete all as specified and as directed.

Supply and fixing in repair vitreous china urinals, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with grating and union for discharge pipe, including PVC waste pipe 32mm of suitable length, PTMT waste coupling 32mm dia suitable for urinals, PVC connection 15x 450mm long, CP urinal spreader, 15 mm angle valve fancy type chromium plated complete all as specified and as directed.

Supply and fixing in repairs stainless steel sink with drainage board, made of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets, connecting union to pipe, overall size 915mm x 460mm, bowl size (410 x 330 x 160mm) complete all as specified and directed.

Supply and fixing in repair PVC low level flushing cistern, 10 litre capacity, symphonic action type, white inlet valve, float, handle, including brackets, 15mm PVC connection 600mm long, 15mm cast copper alloy chromium plated angle valve and 32mm dia PVC flushing pipe including fixing of long screws chromium plated complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:4) complete all as specified and as directed.

Material and labour for 100mm thick PCC (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection, concrete shall be laid in alternate bays not exceeding 3m in length, finished fair and even complete all as specified and directed.

Material and labour mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending, spirally to hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Material and labour for reinforced cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) in foundation, including fafts, footing, foundation beams, plinth beams, bases for columns, manhole cover and necessary formwork square or rectangular etc basement slabs, under reamed piles and mass concrete complete all as specified and directed.

Material and labour in repair for cast iron floor trap with steel grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-I dia of outlet in 100mm complete all as specified and as directed.

Material and labour for PVC (SWR) floor trap 63mm dia for wash hand basin, including 40mm dia HDPE pipe upto the trap of bathroom and jointing with solvent with outlet pipes, stainless steel grating etc fixed in repairs complete all as specified and directed.

Supply and fixing PVC (SWR ) pipes, 110 mm bore, single socketed, in any length, with rubber joints, fixed to walls complete including fixing clamps etc with nut and bolts including taking down of pipe complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings (below or above ground level) and removing from site complete all as specified and directed.

Material and labour cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in padding / levelling concrete on top of roof slab and chajjas and other similar works complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and as directed.

Supply and fixing Aluminium door shutter (Double or single leaf) with frame made out of aluminium section of size 83 x 44 x 1.5mm in frame, Style, top and bottom rail using section 114 x 44 x 1.5mm including 5 mm thick float glass panes of modi fixed with heavy duty aluminium clips at top panel neoprin rubber gasket, angle cleats etc complete with heavy duty floor door closer, aluminium handle approved shape 2 No's, aluminium tower bolt 200mm size 01 No's, 4 lever lock of approved manufacturer, complete with cost of all materials, labour, T&P, wastage, including making good existing surface disturbed during taking of old chowkat etc, sections size be vary as per availability but weight should not be less then 1.3 kg/RM for frames and styles including powder coating of approved colour (thickness of powder coating not less than 50 micron) complete all as specified and directed.

Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections / appropriate 'Z' sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, chromium plated brass / stainless steel screws complete as per architectural drawings and the directions of Engineer-in-Charge.

Removing existing treatment from roof surfaces such as tiling, tarfelt, fungus moss, dust etc cleaning the RCC roof surface wire wire brushing complete all as specified and directed.

Material and labour for rendering 20 mm thick in CM (1:4) on concrete surfaces (on roof slab) finished even and smooth without using extra cement, mixing liquid water proofing compound complete all as specified and as directed. Note: - Liquid water proofing compound shall be measured and paid separately.

Cleaning and removing loose / dirt materials from the roof surfaces and applying bitumen primer @ 0.30 lit/sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 kg/sqm reinforced with non woven polyster mat weighing not less than 160 gm/sqm, having softening point not less than 800 N /Sq cm, tearing strength of 180 N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch, and applying two coats of aluminium paint complete all as specified and directed.

Supply and fixing factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkats to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10 cm on either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkats and tarring back of chowkats and holdfasts complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed.

Material and labour including preparation and applying two coats of white wash on ceiling including preparation of old plastered surfaces complete all as specified and directed.

Material and labour including preparation of surface and applying three coats of white wash on wall including preparation of new plastered surfaces complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed.

Material and labour for 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

Fixing only 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

Supply and fixing 4mm thick Sheet glass, ordinary qualityand glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

Supply and fixing 5 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and directed.

Material and Labour applying two coats of aluminium paints on roof treatment complete all as specified and directed.

Material and Labour for 250mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

E/M Portion: - Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as spceified and directed

Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site complete all as specified and directed

Taking down existing unserviceable submain wiring any size and making good the disturbed surface complete all as specified and directed

Material and labour for Point wiring with multi stranded FRLS PVC insulated unsheathed copper conductor cable single core of 1.5 Sqmm drawn into and including PVC concealed conduit 'ISI marked' of 20mm dia medium grade as required, fixed in concealed surface of wall/ceiling including cutting chases as required, terminated in pressed steel sunken box having wall thickness as directed suitable for housing of switches, socket, regulator etc, covered with 3mm thick bakelite 'hylam' laminated sheet cover complete with all accessories including single core FRLS PVC insulated unsheathed solid copper conductor cable of 1.5 sqmm for earth continuity conductor (green colour) and connected to earth dolly for one light/fan/bell point controlled by one way switch using proper colour coding, complete all as specified & directed.

Description all as per ser item No 89.00 here-in-before but for one 3 pin socket outlet 5/6 Amp Same board complete all as specified and directed.

Description all as per ser item No 89.00 here-in-before but for one 3 pin socket outlet 5/6 Amp independent complete all as spceified and directed.

Description all as per ser item No 89.00 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 4 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and directed.

Supply and fix in replacement of Switch piano flush type single pole, one way 5/6 Amp , complete all as specified and directed.

Supply and fix in replacement of Switch socket out let combination universal type, 2 in 1, 2 and 3 pin 5/6 Amp, piano flush type, 240 volts, complete all as specified and directed.

Supply and fix in replacement of Socket outlet, 5 pin type, 5 Amp, flush type, 240 Volt, complete all as specified and directed.

Supply and fix in replacement of Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts, complete all as specified and directed.

Supply and fix in replacement of Ceiling rose surface bakelite three terminals 240 volts complete all as specified and directed.

Supply and fix in replacement Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings ,complete all as specified and directed.

Supply and fix in replacement Inverter LED lamp,6500K,900lm in white colour of 9 Wattbase cap B-22 with poly carbonate difusser and aluminium heat sink ,complete all as specified & directed. Make: Halonix/Philips or equivalent.

Supply and fix in replacement Electronic fan regulator stepped type,two module with five step 240 volts,100Watt suitable for 1200/1400 mm sweep AC ceiling fan complete all as specified and directed.

Material and labour in replacement for single pole and neutral enclosur with a two pin and earth plug and socket coplete with one single pole mcb 10 amps complete all as specified and directed.

Supply and fix in replacement of Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and directed. Make: Philips Cat Part No:BN021CLED20SPSUCWGRS2/C&S Cat Part No:LTTB4F20WLED/W / Halonix Cat Part No: HLB-03-20-CW-AL/ Havells cat part No: LUMILINEPLUSBS20WLED865SPCSS/ Crompton CAT part no: LDL-36-CDL / Surya cat part No:SLE BT 20M

Supply and fix in replacement of exhaust Fan metallic body, 300mm(12") sweep, single phase, 230 volts 50 Hz AC,1400 RPM, energy saving, heavy duty totally enclosed, heavy duty motor with die-cast aluminiun rotor mounted on two ball bearings complete with louvers and shutters including cutting hole for fixing exhaust fan to wall and making good the disturbed surfaces (including making holes in wall,plastering, necessary brickwork and distempering) to match with the existing specification, connecting electrically using 3 core 0.75 Sq mm PVC insulated flexible copper conductor cable over all sheathed all as required at site complete all as specified and directed.Make: Halonix/Havells/Bajaj/Crompton

Supply and fix Sheet metal enclosure IP-43 double door for DBs(where MCBs are reqd) SPN 240 V, for 8 ways, complete all as specified and directed.

Supply and fix in replacement of MCB SP-06 to 32 Amp, 240 volts complete all as specified and directed.

Supply and fix in replacement of MCB DP-32 Amp, 240 volts 50Hz AC supply, complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 4 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed.

Material and labour in repair for Earthing complete with galvanized mild steel earth plate electrode size 600x600x6mm thick buried directly in ground (Preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 1.5 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 part-I, connected to test point complete all as specified and directed and testing on completion. The chamber shall be constructed one metre away from edge of earth pit 50 mm thick pre cast cover of cement concrete (1:2:4 ) type B -1 using 20 mm graded stone aggregrate and MS angle iron 50x50x 6 mm frame including two coats of painting over a red oxide to exposed steel surfaces .excavation in soft /loose soil ,returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical plate no-3 of SSR part-1 (2020).

Supply and fix in replacement of Integral LED street light luminaire 60W LED 230 volts made of pressure die cast aluminium housing with high power LED’s lens & toughned glass IP-66 including GI 40mm mounting bracket fixed on wall with necessary clamps,nuts and bolts and making connection with PVC copper flexible cable 1.5sqmm complete all as specified and as directed. Make:Crompton Greaves Cat part No LSTP-60-CDL-M or equivalent in bajaj ,havells

Supply install testing and commissioning including replacement of 1200mm sweep 230 volts ceiling fan , star BEE Five star rated with brushless direct current motor (BLDC) confirming to IS 374:2019, 3 blade along with copper wound stator , with minimum air delivery 210 cubic metre per minute ,aluminium blades , capacitor ,downrod, canopy etc as required including making connection with three core 1.5sqmm flexible copper cable upto ceiling rose complete all as specified and directed. Make: Havells /Crompton/Usha/Bajaj

Supply and fixing in replacement of only switch piano flush button type 15 Amp single pole, one way complete all as specified and directed.

Supply and fixing in replacement of only socket outlet multipurpose 3 pin 2 pin 05 Amp flush type complete all as specified and directed

Supply and fixing in replacement of only socket outlet multipurpose 6 pin 3 pin 15 Amp flush type complete all as specified and directed

Supply and fixing in replacement of LED flood light 100-120w incl inbuilt surge protection as per requirement LED flood lifht fitting along with IP 65 protection complete all as specified and directed

Supply and fixing in repair DB sheet metal enclosures double door,factory made,made out of CRCA mild steel sheet 1.2 mmthik with metalic painting ,FP-42 protection surface mounting 240 volts, 200 amp rated enameled neutral bus bar 12 way dust and vermin proof suitable for incorporation of isolator /MCBs . duly concealed in wall and making good the distrubed surface and colour matching complete all as specified and directed.

Supply and fixing in repair MCB single pole 240 volts ,60 Amps,"B" series10 KA complete all as specified and directed.

Supply and fixing in repair MCB single pole 240 volts ,40 Amps,"B" series10 KA complete all as specified and directed.

Supply and fixing in repair MCB SPN 63 amps 415 volt complete all as specified and directed.

Supply and fixing in repair TPN Isolator 63 amps 415 volt complete all as specified and directed.

Supply and fixing in repair TPN Isolator 32 amps 415 volt complete all as specified and directed.

Excavating in trenches n.exc 1.5 mtrs wide and n.exc 1.5 mtrs in depth for foundation of poles ,taking out/laying of cables, poles etc and getting out in soft /loose soil complete all as specified and directed.

Returning, filling in , including spreading,leveling,watering and well ramming in layers n.exc 1.5 mtr above the starting point in soil complete all as specified and directed.

Removing excavated materials n.exc 50 mtrs and depositing where directed at level n.exc 1.5 mtr above the starting point in soil, complete all as specified and directed.

Supply and laying including replacement of well burnt bricks ,sub class 'B' bricks ,laid breath wise in trenches for protection of UG Cable complete all as specified and directed.

Material and Labour for sand cushioning for protection of cable (below, above and around the cable laid in trenches ) complete all as specified and directed.

Supply and fixing in repair GI tube light grade 40 mm bore laid in trenches /road/drain/wall alongwith all fittings complete with MS clamp and nut bolts and washes etc, including taking down old GI tubing alongwith all fixing accessories complete all as specified and directed

Supply and laying in repair cable in replacement LT underground cable XLPE insulated ,armoured heavy duty electric cable with standed aluminium conductor ,1100 volts grade cross-sectional area 35 sqmm ,3.5 core including taking out old one complete all as specified and directed

Supply and fixing in replacement of 1.5 KW 2 HP 415 V,2 Pole /3000 RPM,DOL, Foot Mounted 3 phase motors for gate including necessary wheels and angle iron frame work complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S TRIKUTA BUILDERS

M/S PARAMJEET SINGH

M/S Sukhmani Construction Co.

Bidder Name

M/S VED PAUL MAHAJAN

M/S TRIKUTA BUILDERS

M/S PARAMJEET SINGH

M/S Sukhmani Construction Co.