Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹48.4 L
EMD Value
₹48,401
Closing Date
22 Jul 2024, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Karnataka Power Transmission Corporation Limited
Wahida Begum
Replacement of 3rd 100MVA 220/66kV Power Transformer by 150MVA, 220/66kV Power Transformer at 220/66/11kV Yerandanahalli sub-station in Anekal Taluk, Bengaluru Urban Dist., on Partial Turnkey Basis including supply of all materials/ equipment (excluding 150MVA Power Transformer) and erection (including Civil works) of all materials/equipments, testing and commissioning on Partial Turnkey Basis
KPTCL/2024-25/SS/WORK_INDENT934
KPTCL/2024-25/SS/WORK_INDENT934
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Bengaluru
4 documents required · 4 mandatory
Description of the Tools & Plant available with them for execution of the Work
Details of Works on hand and Ongoing contractual commitments
Valid Super Grade Electrical Contractors License of Bidder issued by the Govt. of Karnataka
Audited financial statements including Balance sheets, Profit and Loss statements, Turnover Certificate, Auditors Reports of the last five years preceding the date of bid submission of the Bidder
Documentary proof for Clause No: 3.6 of ITT: Assessed available tender capacity such as, Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years taking into account the completed as well as works in progress and Statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent as sought in Note of the said clause in the prescribed format as in clause No: 1.5 of Qualification Information
Bankers Certificate signed by authorized person in the prescribed format as at Annexure XVIII of Section-4 and as per the clause no.3.3 (b) of ITT Liquid Assets and /or availability of credit facilities).for assessing the Liquid Assets (Letter of Credit/ Certificate from banks for meeting fund requirement)
No Deviation Certificate
The Qualification and experience of key Personnel proposed for carrying out the Work
Undertaking to source the supply of equipment/material from KPTCL Approved Vendors only as per the QR for Vendor registration, available in the KPTCL website i.e., https://kptcl.karnataka.gov.in, Link Tender and Procurement - application for Vendor registration etc
Letter of Undertaking as in Annexure
Undertaking to source the supply of equipment/material from Vendors who meet the eligibility clauses regarding restriction on procurement from a country which shares land border with India as specified in Annexure- XVII
Upload all relevant documents as per Section-2 & 3 Eligibility, Qualifying information, NIT, Terms & conditions as stipulated in the Tender Document
All other documents as per tender documents and technical specifications
Self-declarations of Bidder in respect of Litigation, dis-qualification due to non-performance, Risk & cost clause and Restriction on border sharing as specified in Annexure- XVI & Annexure-XVII as per Clause No.2.4 of ITT
Self-declaration as sought in Clause No. 3.6 Note (ii) of ITT by the Bidder stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct
Power of Attorney in favour of all the persons signing the documents and a certified copy by the Company Secretary/Authorized Signatory for power of attorney holder shall be attached as evidence for authentication
Certificate of Incorporation of the Individual or any relevant document in respect of Partnership/Proprietorship firms as per the tender document
GST registration, PAN, EPF, ESI
₹1,220
₹48,401
6 Jul 2024
6 Jul 2024
23 Jul 2024
16 Jul 2024
SUPPLY-Replacement of 3rd 100MVA 220/66kV Power Transformer by 150MVA, 220/66kV Power Transformer at 220/66/11kV Yerandanahalli sub-station in Anekal Taluk, Bengaluru Urban Dist., on Partial Turnkey Basis including supply of all materials/ equipment (excluding 150MVA Power Transformer) and erection (including Civil works) of all materials/equipments, testing and commissioning on Partial Turnkey Basis
BUS BAR FORMATION:Drake ACSR 220KV side.
BUS BAR FORMATION:Earth wire 7/3.15mm steel with clamps and lugs.
Insulation Hardwares and Clamps:C type Wedge connector for Isolators, breakers, CTs for 220 kV side (Drake-Drake)
Insulation Hardwares and Clamps:C type Wedge connector for lsolators, breakers, CTs for 66 kV side (single Drake-Single Drake)
Insulation Hardwares and Clamps::C type Wedge connector for lsolators, breakers, CTs for 66 kV side (Double Drake-Single Drake)
AC distribution Box (Out door):AC distribution Box double front (out door), 24 terminal 1200 x 1350 x 600 mm, 2 I/C of 100 Amps, MCCB 20 KA + 24 O/G MCB 16 Amps + 24 O/G of 100...
PVC insulated Aluminium Power Cable: 70 sqmm 3 1/2 core, with glands/lugs/ferrules
PVC insulated Copper Control Cables with Lugs/Ferrules: 19C x 2.5 Sqmm Copper Control Cable
PVC insulated Copper Control Cables with Lugs/Ferrules:10C x 2.5 Sqmm Copper Control Cable
PVC insulated Copper Control Cables with Lugs/Ferrules:4C x 2.5 Sqmm Copper Control Cable
PVC insulated Copper Control Cables with Lugs/Ferrules:4C x 4.0 Sqmm Copper Control Cable
PVC insulated Copper Control Cables with Lugs/Ferrules:Copper PVC instrumentation cable, Armord (screened cable) 2PX1.5 Sqmm
Erection, TC and Decommissioning for Replacement of 3rd 100MVA 220/66kV Power Transformer by 150MVA, 220/66kV Power Transformer at 220/66/11kV Yerandanahalli sub-station in Anekal Taluk, Bengaluru Urban Dist., on Partial Turnkey Basis including supply of all materials/ equipment (excluding 150MVA Power Transformer) and erection (including Civil works) of all materials/equipments, testing and commissioning on Partial Turnkey Basis
Power Transformer 3 phase, 50 Hz, Core type, 3 winding star/ star /delta, transformer Vector group: YNyn0dl1, OLTC, bushing GT for tertiary of ratio 1000/ 1A, 5P20, 15VA, ONAN/ONAF/OFAF with FAN Con...
AC distribution Box (Out door): AC distribution Box double front (out door), 24 terminal 1200 x 1350 x 600 mm , 2I/C of 100 Amps, MCCB 20 KA + 24 O/G MCB 16 Amps + 24 O/G of 10...
PVC insulated Aluminium Power Cable: 70 sqmm 3 1/2 core, with glands/lugs/ferrules
PVC insulated Copper Control Cables with Lugs/Ferrules: 19C x 2.5 Sqmm Copper Control Cable ,
PVC insulated Copper Control Cables with Lugs/Ferrules: 10Cx2.5 Sqmm Copper Control Cable
PVC insulated Copper Control Cables with Lugs/Ferrules: 4C x 2.5 Sqmm Copper Control Cable
PVC insulated Copper Control Cables with Lugs/Ferrules: 4Cx4.0 Sqmm Copper Control Cable
PVC insulated Copper Control Cables with Lugs/Ferrules: Copper PVC instrumentation cable, Armord (screened cable) 2PX1.5Sqmm
Earthing for Equipments: Grounding of equipment with 50x6mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Including all connected works with all materials supplied by the contractor.
Earthing for Equipments: Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 Mtrs long with 2 parts G.I.Flat 50 X 6mm clamp welded around the pipe etc., including cos...
Supplying and Providing 450 mm dia 450 mm height 1.5 inch to 2 inch thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.
De commissioning: Dismantling of 1 x 100 MVA, 220/66/ 11 KV, Power Transformer and parts like bushings with inbuilt CTs etc., releasing of oil from Transformer, comp1ete as per direction of site Engi...
De commissioning: Moving of Transformer from the plinth to the loading point as per direction of site Engineer. 151 Mtx 50mtrs x 1no=7550 MT/mtr
Civil-Replacement of 3rd 100MVA 220/66kV Power Transformer by 150MVA, 220/66kV Power Transformer at 220/66/11kV Yerandanahalli sub-station in Anekal Taluk, Bengaluru Urban Dist., on Partial Turnkey Basis including supply of all materials/ equipment (excluding 150MVA Power Transformer) and erection (including Civil works) of all materials/equipments, testing and commissioning on Partial Turnkey Basis
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved M-Sand including hand packing, ramming, watering including cost of all materials and labour with...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
For Head walls at 8 % for centering and shuttering
For Column or Piers at 70 % for centering and shuttering
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevan...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Releasing and and refixing of existing earth pit Including cost of labour, materials, HOM of machinary, if as and when required ect., complete as per the directions of Engineer in charge of the work.
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Disposal off the excess excavated earth and debries of all types by vehicle including loading, unloading with all lead and lifts, labour, HOM of machineries etc. for Distance 10 km
Arranging net and bolt, Baseplate and other items to complition of yard light footing structure as per directions of engineering incharge.
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Labour charges for welder: Welder
Helper to fitter
Charges for lifting, holding in position for making sufficient space to carry out the work. Including cost of labour, materials, HOM of machinary, scaffolding if as and when required ect., complete as...
eplacement of 3rd 100MVA 220/66kV Power Transformer by 150MVA, 220/66kV Power Transformer at 220/66/11kV Yerandanahalli sub-station in Anekal Taluk, Bengaluru Urban Dist., on Partial Turnkey Basis including supply of all materials/ equipment (excluding 150MVA Power Transformer) and erection (including Civil works) of all materials/equipments, testing and commissioning on Partial Turnkey Basis
Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...
Power Transformer 3 phase, 50 Hz, Core type, 3 winding star/ star /delta, transformer Vector group: YNyn0dl1, OLTC, bushing GT for tertiary of ratio 1000/ 1A, 5P20, 15VA, ONAN/ONAF/OFAF with FAN Con...
BUS BAR FORMATION:Drake ACSR 220KV side.
AC distribution Box (Out door): AC distribution Box double front (out door), 24 terminal 1200 x 1350 x 600 mm , 2I/C of 100 Amps, MCCB 20 KA + 24 O/G MCB 16 Amps + 24 O/G of 10...
BUS BAR FORMATION:Earth wire 7/3.15mm steel with clamps and lugs.
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
PVC insulated Aluminium Power Cable: 70 sqmm 3 1/2 core, with glands/lugs/ferrules
Insulation Hardwares and Clamps:C type Wedge connector for Isolators, breakers, CTs for 220 kV side (Drake-Drake)
Providing and Filling in foundation with granite / trap broken metal 100mm and down size with approved M-Sand including hand packing, ramming, watering including cost of all materials and labour with...
PVC insulated Copper Control Cables with Lugs/Ferrules: 19C x 2.5 Sqmm Copper Control Cable ,
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Insulation Hardwares and Clamps:C type Wedge connector for lsolators, breakers, CTs for 66 kV side (single Drake-Single Drake)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
PVC insulated Copper Control Cables with Lugs/Ferrules: 10Cx2.5 Sqmm Copper Control Cable
Insulation Hardwares and Clamps::C type Wedge connector for lsolators, breakers, CTs for 66 kV side (Double Drake-Single Drake)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
AC distribution Box (Out door):AC distribution Box double front (out door), 24 terminal 1200 x 1350 x 600 mm, 2 I/C of 100 Amps, MCCB 20 KA + 24 O/G MCB 16 Amps + 24 O/G of 100...
PVC insulated Copper Control Cables with Lugs/Ferrules: 4C x 2.5 Sqmm Copper Control Cable
For Head walls at 8 % for centering and shuttering
PVC insulated Aluminium Power Cable: 70 sqmm 3 1/2 core, with glands/lugs/ferrules
PVC insulated Copper Control Cables with Lugs/Ferrules: 4Cx4.0 Sqmm Copper Control Cable
For Column or Piers at 70 % for centering and shuttering
PVC insulated Copper Control Cables with Lugs/Ferrules: 19C x 2.5 Sqmm Copper Control Cable
PVC insulated Copper Control Cables with Lugs/Ferrules: Copper PVC instrumentation cable, Armord (screened cable) 2PX1.5Sqmm
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevan...
Earthing for Equipments: Grounding of equipment with 50x6mm G.I. Flat and connecting Equipment to the earthmat/ground pit. Including all connected works with all materials supplied by the contractor.
PVC insulated Copper Control Cables with Lugs/Ferrules:10C x 2.5 Sqmm Copper Control Cable
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includi...
Earthing for Equipments: Grounding of equipments by providing cast iron pipe of 100mm ID 13mm thickness, 2.75 Mtrs long with 2 parts G.I.Flat 50 X 6mm clamp welded around the pipe etc., including cos...
PVC insulated Copper Control Cables with Lugs/Ferrules:4C x 2.5 Sqmm Copper Control Cable
Supplying and Providing 450 mm dia 450 mm height 1.5 inch to 2 inch thick hume pipe collar (non pressure type) for earth pits including all lead and lifts etc.
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
PVC insulated Copper Control Cables with Lugs/Ferrules:4C x 4.0 Sqmm Copper Control Cable
De commissioning: Dismantling of 1 x 100 MVA, 220/66/ 11 KV, Power Transformer and parts like bushings with inbuilt CTs etc., releasing of oil from Transformer, comp1ete as per direction of site Engi...
Releasing and and refixing of existing earth pit Including cost of labour, materials, HOM of machinary, if as and when required ect., complete as per the directions of Engineer in charge of the work.
PVC insulated Copper Control Cables with Lugs/Ferrules:Copper PVC instrumentation cable, Armord (screened cable) 2PX1.5 Sqmm
De commissioning: Moving of Transformer from the plinth to the loading point as per direction of site Engineer. 151 Mtx 50mtrs x 1no=7550 MT/mtr
Providing and fixing MS inspection door of size 60 cms x 60 cms, including MS frame made of 50x50x6mm angle, shutters made of 3mm thick MS sheets, with hinges, locking arrangements at top etc. includi...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Disposal off the excess excavated earth and debries of all types by vehicle including loading, unloading with all lead and lifts, labour, HOM of machineries etc. for Distance 10 km
Arranging net and bolt, Baseplate and other items to complition of yard light footing structure as per directions of engineering incharge.
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Labour charges for welder: Welder
Helper to fitter
Charges for lifting, holding in position for making sufficient space to carry out the work. Including cost of labour, materials, HOM of machinary, scaffolding if as and when required ect., complete as...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Station and mounting structures.zip
Others - drawings • 9.31 MB
Tender Documents INDENT934.docx
Tender Document • 0.46 MB
Circulars and Guidelines.zip
Others - Circulars and guidelines • 1.47 MB
Civil Drgs.zip
Others - Drawings • 5.41 MB
NIT.pdf
Tender Document • 0.65 MB
Technocommercial Sheet Call-4.xlsx
Techno-Commercial Worksheet • 0.79 MB
Technical Specifications.zip
Others - Technical specifications • 15.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .