VIII.11011/9 Sect/Engr-AMC/NIT/2025-26/19

Amount

Schedule ' A ' Part-I (Pole erection and Earthing):

Erection of steel tubular or rail pole in cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc as required.

Supplying and erection of bow stay set complete (galvanised) with 19/20 mm dia x 1.8 metres long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm dia G.I stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone agrregate 40 mm nominal size) foundation including excavation and refilling and also with 0.6 m long brace of size 50 mm x50 mm x 6 mm angle iron with 50mm dia pulley fixed at one end of the brace as required.

Supplying and erection of 100 mm x 65 mm pin insulator complete with G.I. Spindle and nuts etc. as required.

Supplying and fixing of Galvanised insulator hardware fitting ball and socket type with strain clamps, bolts and nuts and washer for 3 Nos 11 KV disc insulator

Supplying and fixing of 11 KV disc insulator into the steel tubular or rail pole

Providing and fixing 50 mm dia x 5.6 metres G.I pipe (including accessories) complete with 50 mm x 50 mm x 6mm angle iron cross arm and 40 mm x 3 mm M.S flat iron clamps bends for guard wire, 75 mm x 90 mm shackle insulator and straps, 7/including painting the angle and flat iron with primer paint etc as required

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessies , and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coal and salt as required.

Supplying and lying 25mm X 5mm G.I strip at 0.5 metre below ground as strip earth electrode, including connection / terminating with G.I nut, bolt, spring, washer etc as required . ( jointing shall be done overlapping and with 2 sets of G.I. nut and bolt & spring washer spaced at 50mm ).

Schedule ' A ' Part-II (Repair of existing control panel of Gen room):

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes, making connections , etc. as required. 400A, 35 KA, TPMCCB

Supplying and fixing following rating , four pole, 415V , isolator in the existing MCB DB complete with coonections, testing and commisioning etc. as required . 40 A

Supplying and fixing following rating , four pole, 415 V , isolator in the existing MCB DB complete with coonections, testing and commisioning etc. as required . 63 A

Supplying and fixing 400 amps. TPN , rising mains in metal enclosure with aluminium busbar including fixing clamp

Supplying and fixing of metal sheet end Box enclosure of 400 Amp TPN MCCB

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes, making connections , etc. as required. 100 A,16 KA, TPMCCB

Supplying and fixing of 63 A rating, 240/415 V, DP MCB "C" curve in the existing distribution board.

Supplying and fixing 5A to 32 A rating, 240/415 V, 10 KA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Suplying and fixing of aluminium cable lugs connecting to the existing panel board size of Aluminium of cable lugs for 25 sq. mm cable

Suplying and fixing of aluminium cable lugs connecting to the existing panel board size of Aluminium of cable lugs for 35 sq. mm cable

Suplying and fixing of aluminium cable lugs connecting to the existing panel board size of Aluminium of cable lugs for 50 sq. mm cable

Suplying and fixing of aluminium cable lugs connecting to the existing panel board size of Aluminium of cable lugs for 70 sq. mm cable

Suplying and fixing of aluminium cable lugs connecting to the existing panel board size of Aluminium of cable lugs for 95 sq. mm cable

Suplying and fixing of aluminium cable lugs connecting to the existing panel board size of Aluminium of cable lugs for 120 sq. mm cable

Suplying and fixing of aluminium cable lugs connecting to the existing panel board size of Aluminium of cable lugs for 150 sq. mm cable

Supplying and fixing of heavy type copper battery terminals to the existing battery

Schedule ' A ' Part-III (Repair of 100 KVA Transformer)

Repair of existing transformer 100 KVA with Dismantling / disconnecting of transformer and Re assemble , incl necessary transportation , sevicing charges, spares which are urgent required to made funtional of three phase output transformer, including repairing & fixing and re installation with testing and commissioning at site complete.

Repair and fixing of LT power supply of three phase output

Supplying and fixing in repair over head line seperator PVC body extendable with connectors for LT distribution line completed all as directed.

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of branches, girth upto 60 cm girth and disposal of unserviceable material

M/S M. T. ENTERPRISES (BID ID -3269859)