REPAIR, PAINTING AND POLISHING OF WOODEN/STEEL FURNITURE AND REPAIR / REWEAVING AND CONVERSION OF GI CHARPOYS AT AURANGABAD UNDER GE(S) AHMEDNAGAR

Amount

Removing unserviceable wooden parts from chair dining and providing new wooden parts made out of Ist class hard wood/ Indian teak wood and fixing the same with the existing furniture articles with suitable bamboo pins/glues as per specifications and directions by Engr-In- Charge for the following :-

Rear legs. FD-279/228

Front legs. FD-279/228

Rear/front/side rails/including cane hole. FD-279/228

Stiffners. FD-279/228

Back rest. FD-279/228

Removing unserviceable wooden parts from chair writing and providing new wooden parts made out of 1st class hard wood indian teak wood and fixing the same with the existing furniture articles with suitable bamboo pins/glues as per specification and direction by Engineer -in- Charge for the following :-

Rear legs. FD-280, FD-250

Front legs. FD-280, FD-250

Rear/front/side rails/including cane hole. FD-280, FD-250

Stiffners. FD-280, FD-250

Back rest. FD-280, FD-250

Arms rest. FD-280, FD-250

Removing unserviceable wooden parts from chair easy and providing new wooden parts made out of 1st class hard wood Indian teak wood and fixing the same with the existing furniture articles with suitable bamboo pins/glues as per specification and direction by Engineer-in-charge for the following :-

Rear leg/front legs. FD-229, FD-17

Front/rear/rails including cane holes. FD-229, FD-17

Side rails for seat including cane holes. FD-229, FD-17

Front /rear/stiffeners. FD-229, FD-17

Side rails for back rest including cane hole. FD-229, FD-17

Upper /lower rails for back rest including cane. FD-229, FD-17

Arms rest. FD-229, FD-17

Removing unserviceable plastic cane from chairs dining, Chair writing, Chair easy, Bin soil linen and stool dressing and recaning with new plastic cane 2 mm wide white oval type plastic cane and bordering with 3 mm wide plastic cane weaving as per Godrej pattern complete all as specified on drawing and as directed. FD-279, 244, 228, 280, 229, 27M, 250

Replacement of out old unserviceable / broken elbow from the existing GI charpoy frame and providing GI elbow 3 way duly threaded (ISI marked) weight not less than 450 gms suitable for 32 mm dia GI pipe charpoy complete all as shown on drawings and as directed by the Engineer-in-Charge

Removing unserviceable check nut of GI charpoy and supply and fix new check nut 32 mm bore complete all as directed. (FD-220)

Long Rail : Removing of unserviceable long rail of charpoy GI pipe and supplying and fixing of new long rail made out from 32 mm dia GI tubing medium grade of shape and size 1900 mm long as per existing long rail of charpoy GI pipe including threading upto 22 mm on both sides complete all as specified and shown on drawing (MAKE:TATA / JINDAL / Zenith).

Removing unsrviceable long rail and converting broken long rails retrieved in replacement of 7.00 here-in-before into two short rails of size 820 mm long threading both ends, one side up to 22 mm and another end up to 44 mm and fixing in charpoy GI pipe including taking out old unserviceable short rail from the existing GI charpoy frame complete all as specified and as directed shown on drawings & as directed by the Engineer-in-Charge.

Removing of unserviceable short rails of GI Charpoy and converting the same into two legs including cutting, threding at one end and another side new 3 mm thick MS sheet to be welded on base and mild steel bracket in 2 Nos of required size and shape to be welded for MNF set duly painting with synthetic enemal black paint as specified on drawing and as directed. FD-220

Dismantling / taking down / cutting of existing unserviceable newar from GI pipe charpoy and reweaving with and including superior quality nylon newar 50 mm to 55 mm wide white colour of weight not less than 1.50 Kg per charpoy and shall be closely woven both ways(both top and bottom layer of charpoy) including tightening the elbows etc in the true position complete all as specified and shown on drawing, Make -Usha or Komal as approved by GE/Engineer-in-charge before incorporating in the work.

Removing of unserviceable nylon newar from charpoy GI pipe providing plywood 12 mm thick BWR grade ISI marked conforming to IS 303-1989 of make ACTION TESA / KITPLY /GREENPLY / CENTURY PLY fixed to charpoy GI,as per size of charpoy with mild steel bolts fully threaded 6 mm dia, 25 mm long flat head with nuts and washers (10 Nos for each charpoy) making holes by drilling for fixing of plywood with and including two nos. 25x3 mm MS Flat iron support to the centre of the charpoy and short rail stiffener of 25x 5mm, 75 mm long (total 04 Nos) shall be welded including drilling holes for fixing nut bolt complete all as specified & directed by Engr-in-charge. Note :- (i) All steel sections except GI articles and adjoining surfaces of GI pipe which shall be degalvanised during welding of MS hollow pipe shall be painted with two coats of synthetic enamel paint black over coat of red oxide primer. (ii) All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. (iii) The top of bolt (Head) for fixing of plywood shall be flushed with ply top & finished with suitable fitting. FD-220

Removing of unserviceable plywood from charpoy GI pipe and providing new plywood 12 mm thick BWR grade ISI marked conforming to IS 303-1989 of make ACTION TESA/KITPLY/GREENPLY/CENTURY PLY to charpoy GI as per size of charpoy with mild steel bolts fully threaded 6 mm dia 2 5mm long,flat head with nuts and washers (10 Nos for each charpoy) making holes by drilling for fixing of plywood with and broken / damaged or wherever required shall be welded 25x3 mm MS Flat iron support to the centre of the charpoy and short rail stiffener of 25x5mm, 75mm long (total 04 Nos) shall be welded including drilling holes for fixing nut bolt complete all as specified & directed by Engr-in-charge. Note :- (i) All steel sections except GI articles and adjoining surfaces of GI pipe which shall be degalvanised during welding of MS hollow pipe shall be painted with two coats of synthetic enamel paint black over coat of red oxide primer. (ii) All the corners of plywood shall be rounded same as per shape of corner elbows of charpoy. (iii) The top of bolt (Head) for fixing of plywood shall be flushed with ply top & finished with suitable fitting. FD-220

Removing unserviceable square tube from Table dining ORs, Table clerk steel and Table office officer steel, Table steel 900x900 and providing new square tube as per existing size duly welded complete all as directed by Engineer-in-charge. FD-165, FD-1003, FD-1004, FD-1009

Removing unserviceable top from Table Dining OR's and providing new Top made out of 18/19mm Particle Board including fixing 22 guage aluminium sheeton top complete all as shown on drawing and as directed by Engineer-in-charge. FD-165

Removing unserviceable parts from the following wooden items and supply and fix new parts made out of 1st class hard wood teak wood and fixing with the existing items as specified and directed by Engineer-in-charge for the following :-

Legs for table dining 6/8 persons. FD-30, FD- 273, FD-239

Front/rear rails of table dining 6/8 persons. FD-30, FD- 273, FD-239

Side rails for table dining 6/8 persons. FD-30, FD- 273, FD-239

Centre rails of table dining 6/8 persons. FD-30, FD- 273, FD-239

Leg of table 3'x2'. FD-283 FD- 231, FD-284

Front/rear rails of table 3'x2'. FD-283 FD- 231, FD-284

Side rails of table 3'x2' . FD-283 FD- 231, FD-284

Drawers of Table 3'x2'. FD-283 FD- 231, FD-284

Front /rear top/bottom rails of table writing. FD-249, FD- 275

Legs of table writing. FD-249, FD- 275

Stiffeners of table writing. FD-249, FD- 275

Side rails of table writing. FD-249, FD- 275

Drawers with cabinet of table writing. FD-249, FD- 275

Legs of table centre. FD-29 FD- 335, FD-274

Front/rear rails of table centre. FD-29, FD- 335, FD-274

Stiffeners of table centre. FD-29, FD- 335, FD-274

Bottom rails for table centre. FD-29, FD- 335, FD-274

Legs of table 2' x 2'. FD-95M, DB-4085

Front/rear/side rail of table 2 x 2. FD-95M, DB-4085

Leg of table 3 x 3. FD-88M

Front/rear/side rails of table 3 x 3. FD-88M

Legs of Table dining 1200x900. FD-273

Side rails of Table dining 1200x900. FD-273

Legs of peg table. FD-25, FD-236, FD-277

Bottom rail of peg table. FD-25, FD-236, FD-277

Top rail of peg table. FD-25, FD-236, FD-277

Leg of teapoy. FD-34 FD-232 FD-225

Top rail of teapoy. FD-34 FD-232 FD-225

Bottom rail of teapoy. FD-34 FD-232 FD-225

Removing the following unserviceable wooden parts from sofa set five, four or three seater and Supply and fix new wooden parts made out of 1st class hard wood Indian teak wood as per size given in the drawing to the existing sofa set all as specified and directed for the following :-

Legs of sofa chairs 70 x 35 x 30MM. FD-281, FD-373

Arms rest of sofa chairs 70X35X725MM. FD-281, FD-373

Wooden bearer 40X40X670MM. FD-281, FD-373

Wooden batten 50X20X670MM. FD-281, FD-373

Wooden rails 35X100X670MM. FD-281, FD-373

Wooden frame for head 70X35X600MM. FD-281, FD-373

Wooden rails to support back frame 30X50X670MM. FD-281, FD-373

Wooden bearer 40X40X1730MM. FD-281, FD-373

Wooden rail 35X100X1730MM. FD-281, FD-373

Wooden frame for back 70X35X1660MM. FD-281, FD-373

Removing unserviceable wooden parts from the bed hard and supply and fix new wooden parts made out of 1st class hard wood Indian teak wood to as per size and dimensions given in drawing the existing hardbed all as specified and directed by Engr-in-charge for the following:-

Short rails of bed hard. FD-246

Long rails of bed hard. FD-246

Stiffners of bed hard. FD-246

Front leg of bed hard. FD-246

Rear legs of bed hard. FD-246

Head rest of bed hard/bed newar FD-246, FD-245

Foot rest of bed hard/bed newar FD-246, FD-245

Removing of unserviceable plywood from bed hard/bed with plywood top and providing new plywood 12 mm thick commercial Make-Kitply/green ply/Action Tesa/Century fixed complete as shown in the drg and all as directed by Engr-in-charge. FD-246, FD-245, FD/E6/MAP/8 (R)

Removing unserviceable top frame from the table bed side and providing new Top made out of 19/18mm thick prelaminated glossy finish MDF board complete all shown in drg and as directed by Engr-in-charge. FD-248, FD-276

Removing unserviceable side frame of table bed side and providing new sides frame made out 19/18mm thick prelaminated glossy finish MDF board complete all as shown in in drg and as directed by Engr-in-charge. FD-284, FD-276

Removing unserviceable back side of table bed side and providing new back made out of 6 mm thick plywood to the existing table bed side complete all as shown in in drg and as directed by Engr-in-charge. FD-284, FD-276

Removing unserviceable shelves from table bed side and providing new shelves made out of 12mm thick prelaminated glossy finish MDF board complete all as shown in in drg and as directed by Engr-in-charge. FD-284, FD-276

Removing unserviceable drawer from the table dressing gents and providing new drawer made out of 12 mm thick prelaminated particle board complete all as shown in drg and as directed by Engr-in-charge. FD-230

Removing unserviceable top frame of table dressing gents and providing new top frame complete all as shown in drg and as directed by Engr-in-charge. FD-230

Removing unserviceable/broken looking mirrior with frame from the table dressing Gents and providing new mirrior with frame complete all as shown in drg and as directed by Engr-in-charge. Make of the Mirrior Modi Guard. FD-230

Removing unserviceable Knob from table dressing gents and providing new Knob of approved quality complete all as directed. FD-230

Removing unserviceable drawer from the table dressing ladies and providing new drawer made out of 19/18mm thick prelaminated particle board complete all as per drg and as directed by Engr-in-charge. FD-251, FD-32

Removing unserviceable top frame of table dressing ladies and providing new top frame to the existing drawers complete all as per drg and as directed by Engr-in-charge. FD-251, FD-32

Removing frame with Mirror of the table dressing ladies and providing new frame with Mirror to the existing table dressing ladies wherever required complete all as per drg and as directed by Engr-in-charge. FD-251, FD-32 Make of mirror Modiguard.

Removing unserviceable back base ply from table dressing ladies with mirror and S&F new back base ply to the existing Table dressing ladies with mirror complete all as per drg and as directed by Engr-in-charge. FD-251, FD-32 Make of mirror Modiguard.

Removing broken unserviceable sliding glass shutter and alumn channel and providing new glass shutter and alumn channel to the existing table dressing ladies complete all as per drg and as directed by Engr-in-charge. FD-251, FD-32

Removing unserviceable legs from table dressing ladies and providing new legs made out of 1st class hard wood Indian teak wood complete all as per drg and as directed by Engr-in-charge. FD-251, FD-32

Removing unserviceable back from Side Board and providing new 6 mm thick plywood commercial of same size complete all as per drg and as directed by Engr-in-charge.FD-241, FD-26

Removing unserviceable drawers from Side Board and providing new drawers made out of 12 mm commercial plywood of same size complete all as per drg and as directed by Engr-in-charge. FD-241, FD-26

Removing unserviceable door shutter from Side Board and providing new door shutter of 18/19mm thick prelaminated particle board one side teak face and other side white teak wood beading all around complete all as specified and as shown on drg. FD-241, FD-26

Removing unserviceable Knob from Side board and providing new knob with suitable screws complete as specified and directed by Engr-in-charge. FD-241, FD-26

Removing unserviceable top from Side board and providing new top of size 19/18mm thick prelaminated particle board one side teak face and other side white complete all specified and as shown on drg. FD-241, FD-26

Removing unserviceable sides from Side board and providing new sides of size 19/18mm thick prelaminated particle board one side teak face and other side white complete all specified and as shown on drg. FD-241, FD-26

Material and labour for welding work of parts of steel furniture items of broken joints as required and painting works to match existing painting of the same parts after welding as per specification in the drawings (FD-75M, FD-67, FD-84M, FD-256, FD-1003, FD-1004, FD-1007, FD-1008, FD-1009, FD-1012, FD-1027, FD-1031 & FD-1032).

Removing the unserviceable tops from the following tables and providing new tops made out of 19/18 mm prelaminated MDF board of Make Kitply/green ply/Action Tesa/Century and fixing the same with the existing tables with suitable size screws including 6 mm thick beading all around to the tops compleet as specified and directed for the following :-

Table writing. FD-249, FD-275

Table centre. FD-29, FD-335, FD-274

Teapoy verandah. FD-35, FD-255

Table 600X600 MM, FD-95M, DB-4085

Table 3X3. FD-88

Table dining 1200x900mm, FD-273

Table peg. FD-25, FD-236, FD-277

Teapoy. FD-34, FD-232, FD-225

Table dining 6 persons. FD-30, FD-273, FD-239

Table dining 8 person. FD-30, FD-273, FD-239

Table 900x600 without & with drawer. FD-283, FD-231, FD-284

Table office clerk steel. FD-1004

Table office officer steel. FD-1003

Removing unserviceable Hasp and staple & providing new 75 mm chromium plated Hasp & Staple to steel shutter and locker bed side steel with suitable rivet/nut and bolt screw all as specificied and shown on drawings. FD-1029, FD-257

Removing unserviceable CP Handle from locker bed side & providing new CP handle 100mm and fixing with suitable screw /bolt to shutter of locker bedside steel complete all as specificied and shown on drawings. FD-1029, FD-257

Removing unserviceable hinges from locker bed side and providing new hinges with suitable welding to locker bed side steel complete all as specificied and shown on drawings. FD-1029, FD-257

Removing unserviceable legs from locker bed side and providing new legs made out of 1.00 mm thick black sheet and fixing to locker bedside steel with suitable welding.The legs shall be painted with one coat of red oxide primer and two coats of synthetic enameled paint to match the existing compleet all as specificied and shown on drawings. FD-1029, FD-257

Removing unserviceable shutter of locker bed side and providing new shutter to locker bed side steel and painted with one coat of red oxide primer and two coats of synthetic enameled paint to match the existing complete all as specificied and shown on drawings. FD-1029, FD-257

Removing unserviceable conduit pipe and providing new 20 mm mild steel conduit pipe with socket to locker bed side steel compleet all as specificied and shown on drawings. FD-1029, FD-257

Removing unserviceable handle from Almirah Large/med Steel with shelves & Almirah medium steel with shelves and providing new handle to Almirah large steel and Almirah med steel with shelves as per specification and shown on drawing. FD-1031, FD-1032

Removing unserviceable locking device of Almirah large/med steel with shelves & Almirah med with shelves and providing new locking device including cover as per specification and shown on drawing . FD-1031, FD-1032

Removing unserviceable lock from Almirah large/med steel with shelves and providing new Godrej or equivalent make lock with duplicate key compleet all as specified and shown on drawing. FD-1031, FD-1032

Removing unserviceable shelves from Almirah large/med steel with shelves and providing new shelves for Almirah large steel with shelves made out of 1.00mm thik black sheet complete as per specified and shown on drawing. FD-1031, FD-1032

Removing unserviceable legs from Almirah large/med steel with shelves and Almirah med steel with shelves and providing new legs made out of 1.00 mm thick plain black sheet complete all as specified and shown on drawing. FD-1031, FD-1032

Removing unserviceable clips and providing new clips to shelves of Almirah large/med steel with shelves and medium steel with shelves as specified and shown on drawing. FD-1031, FD-1032

Removing unserviceable locks from table office clerk and table office officer steel and providing new locks to table clerk steel and table office officer steel complete all as diercted. FD-1003, FD-1004

Removing unserviceable drawers from table office clerk and table office officer steel and providing new drawers as per existing size complete all as specified and shown on drg. FD-1003, FD-1004

Removing unserviceable drawers handles from table office clerk and table office officer steel and providing new standard recessed drawer handles as per existing size complete all as specified and shown on drg. FD-1003, FD-1004

Removing unserviceable hard rubber shoe from table office clerk and table office officer steel and S&F new hard rubber shoes of best quality as per existing size complete all as specified and shown on drg. FD-1003, FD-1004

Removing unserviceable seat from chair CB steel with arms and providing new seat and back for chair CB steel with arms duly painted as specified and directed. (FD-75M)

Removing unserviceable back from chair CB steel with arms and providing new back for chair CB steel with arms duly painted complete all as specified and directed.(FD-75M)

Removing unserviceable hand rest from chair CB steel with arms and providing new hand rest made out of 1st class hard wood Indian teak wood to the existing chairs CB steel with arms complete all as specified and directed. FD-75M

Removing unserviceable seat from chair CB steel without arms and providing new seat for chair CB steel without arms duly painted complete all as specified and directed. FD-75M

Removing unserviceable back from chair CB steel without arms and providing new back for chair CB steel without arms duly painted complete all as specified and directed. FD-75M

Removing old unserviceable seat from chair CBA spl with hand rest steel and providing new seat made out of 1st class hard wood Indian teak wood duly canned with 2MM plastic cane to the existing and complete all as specified and directed. FD-120M

Removing old unserviceable back of chair CBA spl with hand rest steel and providing new back of chair made out of 1st class hard wood Indian teak wood duly canned with 2 mm thick plastic cane as per existing complete all as specified and directed. FD-120M

Removing unserviceable hand rest from chair CBA spl with hand rest steel and S&F new hand rest made out of 1st class hard wood Indian teak wood as per size shown on drawing duly polished complete all as specified and directed. FD-120M

Removing existing unserviceable plastic cane/nylon newar, repairing the broken/damaged conduit pipe of seat & back or whatever required by welding,scrapping cleaning of frame of chair Verandah and painting the same with one coat of synthetic enamel white paint and recanning the chair with 3 mm plastic cane of Make Maharashtra or equivalent and providing with 4 Nos. PVC shoes to legs complete all specified and directed by Engineer-in-charge. FD-256

Removing unserviceable planks from form without back and providing new plank made out of 1” class Indian teak wood to the existing form without back all as specified and shown in drawing. FD-77

Preparation of surfaces of form without back and painting the frame with one coat of synthetic enmal paint black complete all as specified and directed. FD-77M

Removing unserviceable seat/back from sofa set five, four or three seater and providing new 100 mm thick cushion of 32 density foam including tapestry cloth cover duly stiched including provn of Zip at one side of cover , Note- Tapestry cloth shall be of Make: Bombay Dyeing/Reymond furnishing/D`Decor. Colour of cloth will be approved by Engineer-in charge, Make of foam Sleepwell(Primo)/ Kurlon(Goldline). FD-373

Removing unserviceable tapestry cloth from the existing sofa foam cushion and providing new cushion cover out of good quality tapestry cloth of rate not less than Rs 250/ per mtrs and as per sample approved by Engineer-in-charge including provn of Zip at one side of cover complete all as specified in drawing.Make: Bombay Dyeing/Reymond furnishing/D`Decor FD-373

Removing unserviceable cushion foam leather from seat of chair easy cushioned and providing new cushioned seat made of good fibre foam leather and fixing with the existing chair easy complete all as specified and directed. FD-358

Removing unserviceable cushion foam leather from back of chair easy cushioned and providing new cushioned back made of good fibre foam leather and fixing with the existing chair easy complete all as specified and diercted.FD-358

Removing unserviceable cushion foam leather from back of chair CB steel with arms arms and providing new cushioned back made of good fibre foam leather and fixing with the existing chair steel with arms complete all as specified and dierected. FD-75M, TP

Removing unserviceable cushion foam leather from seat of chair CB steel with arms arms and providing new cushioned seat made by good fibre foam leather and fixing with the existing chair steel with arms complete all as specified and directed. FD-75M, TP

Removing the unserviceable top, sides of Table bed side new pattern and providing new top and sides as per existing size made out of 18 mm prelaminated particle board of natural teakwood shade on front side complete all as specified and shown on drawing FD/E6/MAP/15(R)

Removing the unserviceable shelf/inner portion of Table bed side new pattern and providing new shelf/inner portion made out of 18 mm thick prelaminated particle board of natural teakwood shade duly provided with edging on front side complete all as specified and shown on drawing FD/E6/MAP/15(R)

Removing the unserviceable back side of Table bed side new pattern and S&F new back side of existing size made out of 18 mm thick prelaminated particle board all as specified and shown on drawing FD/E6/MAP/15(R)

Removing unserviceable drawer of Table bed side new pattern and providing new drawer of existing size with 18 mm thick prelaminated particle board of natural teakwood shade including repair/replacement of guide channels & handles complete all as specified and shown on drg FD/E6/MAP/15(R) (Table bedside new pattern)

Removing unserviceable back frame of Table bed side new pattern and providing new back frame 18 mm x 18 mm thick MS square pipe 18 gauge balck powder coated of existing size including legs with nylon buffers complete all as specified and shown on drg FD/E6/MAP/15(R)

Removing unserviceable side frame of Table bed side new pattern and providing new side frames 18 mm x 18 mm thick MS square pipe 18 gauge balck powder coated of existing size including of legs with nylon buffers complete all as specified and shown on drg FD/E6/MAP/15(R)

Removing existing unserviceable rear legs and providing new rear legs made of teakwood of size 45 mm x 30 mm complete all as specified and shown on drawing FD/E6/MAP/10( R) (Chair dining cushioned)

Removing unserviceable front legs and providing new front legs made of teakwood of size 45 mm x 45 mm to size 45x30mm complete all as specified and shown on drawing FD/E6/MAP/10( R) (Chair dining cushioned)

Removing unserviceable front/rear/side rails & providing new front/rear/side rails made of teakwood of existing size complete all as specified and shown on drawing FD/E6/MAP/10( R) (Chair dining cushioned)

Removing the existing unserviceable stiffeners and providing new stiffeners made of teakwood of size 20 x25 mm complete all as specified and shown on drawing FD/E6/MAP/10( R) (Chair dining cushioned)

Removing the existing unserviceable plywood 10 mm thick and providing new plywood 10 mm of size 440x420 mm complete all as specified and shown on drawing FD/E6/MAP/10( R) (Chair dining cushioned)

Removing the existing unserviceable foam cushoin covered with black ragzine and providing new foam cushoin covered with black ragzine of chair dining cushioned complete all as specified and shown on drawing FD/E6/MAP/10( R) (Chair dining cushioned)

Removing unserviceable hard rubber rings and providing new hard rubber rings to chair dining cushioned complete all as specified and shown on drawing FD/E6/MAP/10( R) (Chair dining cushioned)

Labour for removing unserviceable nylon newar from charpoy folding IP and segregate serviceable / unserviceable charpoys complete all as diercted. FD-388 (Charpoy folding IP with nylon newar)

Tightening/riveting all serviceable charpoy folding IP and dismantling of unserviceable parts/legs of charpoy folding IP and segregate U/S and serviceable and stacking them as directed by the Engr-in-charge FD-388 (Charpoy folding IP with nylon newar)

Removing unserviceable legs and providing new legs medium grade GI pipe as per existing size for Charpoy folding IP complete all as specified and shown on drawing. FD-388 (Charpoy folding IP with nylon newar)

Removing unserviceable hard rubber shoes and providing new hard rubber shoes to charpoy folding IP all as shown on drawing FD-388 (Charpoy folding IP with nylon newar)

Providing plywood 12 mm thick BWR grade ISI marked conforming to IS 303-1989 to charpoy folding IP, of make KITPLY/GREENPLY/ CENTURY PLY as per size of charpoy folding IP with mild steel bolts fully threaded 6 mm dia 50mm long flat head with nuts and washers making holes by drilling for fixing of plywood in two peices with nut bolt complete all as specified & directed by Engr-in-charge. FD-388 Note - (i) All iron work shall be painted with two coat of synthetic anamel black paint over a coat of read oxide primer.

Removing existing unserviceable plywood 4mm and providing new plywood 4mm thick of size 1820x1220 mm of Make Kitply/green ply/Action Tesa/Century complete all as specified and shown on drawing FD-99, FD-154 (Display board 1820X1220)

Removing unserviceable soft board 12mm and providing new soft board 12 mm thick of size 1820x1220mm complete all as specified and shown on drawing FD-99, FD-154 (Display board 1820X1220)

Removing unserviceable Green baize cloth & providing new Green baize cloth of existing size complete all as specified and shown on drawing FD-99, FD-154 (Display board 1820X1220)

Removing unserviceable lipping patti 10 mm and providing new lipping patti 10 mm made out of teakwood of existing size complete all as specified and shown on drawing FD-99, FD-154 (Display board 1820X1220)

Removing the existing unserviceable frame for Display board 1820x1220 mm and providing new frame for Display board 1820 x1220 mm of size 40x60 mm compleet all as specified and shown on drawing FD-99, FD-154

Removing unserviceable Key plate for Display board 1820x1220 mm and providing new key plates complete all as specified and shown on drawing FD-99, FD-154

Preparation of wooden surface by scrapping and cleaning of Display board 1820x1220 mm and applying one coat of french polish complete all as directed by Engineer-in-charge.FD-99, FD-154

: Removing existing unserviceable Soft Board 12 mm and providing new soft board 12 mm thick of existing size complete all as specified and shown on drawing FD-117, FD-366 (Board notice 900X600)

Removing unserviceable frame and providing new Stifener frame of size 50x25 mm for board notice complete all as specified and shown on drawing FD-117, FD-366 (Board notice 900X600)

Removing unserviceable Green baize cloth and providing new Green baize cloth of existing size complete all as specified and shown on drawing FD-117, FD-366 (Board notice 900X600)

Removing unserviceable/broken Glass 3 mm thick and providing new Glass 3 mm thick of existing size complete all as specified and shown on drawing FD-117, FD-366 (Board notice 900X600)

Removing existing unserviceable style of board notice and proving new style 45x20 mm for board notice of existing size complete all as specified and shown on drawing FD-117, FD-366 (Board notice 900X600)

Removing unserviceable Key plate for board notice and providing new key plates complete all as specified and shown on drawing FD-117, FD-366 (Board notice 900X600)

Removing unserviceable Hasp & staples for board notice and providing new Hasp & staples complete all as specified and shown on drawing FD-117, FD-366 (Board notice 900X600)

Preparation wooden surfaces by scrapping and cleaning of board notice 900x600 mm and applying french polish complete all as shown on drawing and as directed by Engineer-in-charge.FD-117, FD-366 (Board notice 900X600)

Removing existing unserviceable particle board and providing new prelaminated glossy finish MDF board 18 mm thick of existing size complete all as specified and shown on drawing FD-233 (Hat stand with mirror)

Removing unserviceable teak wood edging around Hat stand with mirror and providing new teak wood edging 6 mm thick around Hat stand with mirror of existing size complete all as specified and shown on drawing FD-233 (Hat stand with mirror)

Removing unserviceable/broken Mirror and providing new Mirror of existing size fixed with teakwood edging around Mirror complete all as specified and shown on drawing FD-233 (Hat stand with mirror)

Removing unserviceable Metal Pegs and providing new Metal pegs for hat stand with mirror of existing size complete all as specified and shown on drawing FD-233 (Hat stand with mirror)

Removing unserviceable Key plate for hat stand with mirror and providing new key plates complete all as specified and shown on drawing FD-233

Removing the unserviceable seat and providing new seat of size 510x470x60 mm made out 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around complete all as specified and shown on drawing.FD/E6/MAP/01 (Chair computer)

Removing unserviceable back and providing new back as per existing size made out 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam Back form shall be designed with contour lumber support for extra comfort with PVC lipping all around complete as specified and shown on drawing.FD/E6/MAP/01 (Chair computer)

Removing unserviceable arm rest of chair computer and providing new arm rest of black integral skin polyurethane reinforced with MS insert.It shall be scratch and weather resistant complete all as shown on drawing. FD/E6/MAP/01 (Chair computer)

Removing unserviceable tubular frame of chair computer and providing new tubular frame cantilever type and made of 25 mm dia and powder coated for computer chairs complete as shown on drawing. FD/E6/MAP/01 (Chair computer)

Removing unserviceable hydraulic shaft of chair computer and providingnew hydraulic shaft alongwith locking system for computer chairs and as shown on drawing.FD/E6/MAP/01

Removing unserviceable adjustable backrest of chair computer and providing new adjustable backrest in the range of 65 mm and can be locked in 5 steps for better support as per existing size aand s shown on drawing.FD/E6/MAP/01 (Chair computer)

Removing unserviceable twin wheel coastors of chair computer and providing new twin wheel castors of black colour as per existing size complete as shown on drawing.FD/E6/MAP/01 (Chair computer)

Removing unserviceable top of Trolly for TV and providing new top of existing size, made out 18 mm thick prelaminated matt finish MDF board with rounded edges complete all as specified and shown on drawing.FD/E6/MAP/04

Removing unserviceable drawers of Trolly for TV and providing new drawers of Trolly for TV as per existing size made out 18 mm thick prelaminated matt finish MDF board with lipping around complete as specified and shown on drawing.FD/E6/MAP/04

Removing unserviceable sides/bottom of Trolly for TV and providing new sides/bottom as per existing size made out of 18 mm thick prelaminated matt finish MDF board with lipping around complete as specified and shown on drawing. FD/E6/MAP/04

Removing unserviceable Glass shutter of Trolly for TV and providing new Openable Glass shutter 5.5 mm thick with magnetic catcher and stainless steel patch fitting for glass (EBCO type) completeas shown on drawing.FD/E6/MAP/04

Removing the unserviceable coaster of Trolly for TV and providing new coasters as per existing size complete all as shown on drawing.FD/E6/MAP/04

Removing unserviceable top of Table computer and providing new top of existing size made out 18 mm thick prelaminated matt finish MDF board with lipping around complete all as specified and shown on drawing.FD/E6/MAP/03

Removing the unserviceable key board tray of Table computer and providing new key board tray as per existing size made out 18 mm thick prelaminated matt finish MDF board on telescope channel with lipping around complete all as specified and shown on drawing.FD/E6/MAP/03

Removing the unserviceable drawers & mouse tray of table computer and providing new drawers & mouse tray on telescope channels as per existing size made out of 18 mm thick prelaminated matt finish MDF board with lipping around complete all as specified and shown on drawing. FD/E6/MAP/03

Removing the unserviceable verticle shelf of table computer and providing new verticle shelf made of 18 mm thick prelaminated matt finish MDF board for computer Table complete all as shown on drawing.FD/E6/MAP/03

Removing the unserviceable bottom shelf of table computer and providing new bottom shelf made of 18 mm thick prelaminated matt finish MDF board for computer Table complete all as shown on drawing.FD/E6/MAP/03

Removing the unserviceable adjustable legs with nylon buffers of Table computer and providing new adjustable legs with nylon buffers as per existing size complete all as shown on drawing.FD/E6/MAP/03

Removing existing unserviceable rear legs and providing new rear legs made out of teakwood of size 25x50 mm made to shape out of 60x50mm complete all as specified and shown on drawing (FD-357) (Chair dining with long back)

Removing unserviceable front legs and providing new front legs made out of teakwood of size 25x50mm complete all as specified and shown on drawing (FD-357) (Chair dining with long back)

Removing unserviceable front/rear/side rails & providing new front/rear/side rails made out of teakwood as per existing size complete all as specified and shown on drawings. (FD-357) (Chair dining with long back)

Removing existing unserviceable stiffeners and providing new stiffeners made out of teakwood of existing size complete all as specified and shown on drawing (FD-357) (Chair dining with long back)

Removing existing unserviceable plywood and providing new plywood 12 mm thick of existing size complete all as specified and shown on drawing (FD-357) (Chair dining with long back)

Removing existing unserviceable seat and providing new seat 50 mm thick synthetic foam of 20 denisity duly covered with leatherised ragzine (made to shape) of chair dining with long back complete all as specified and shown on drawing (FD-357) (Chair dining with long back)

Removing existing unserviceable back and providing new back 50 mm thick synthetic foam of 20 denisity duly covered with leatherised ragzine (made to shape) of chair dining with long back complete all as specified and shown on drawing (FD-357) (Chair dining with long back)

Removing unserviceable hard rubber rings and providing new hard rubber rings complete all as directed and shown on drawing (FD-357) (Chair dining with long back)

Bucket steel receptacle fixed in replacement complete all as specified and shown in drawing No. FD-1044

Removing unserviceable seat and providing new seat as per existing size made out 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all around Polyurethane foam shall be 50 mm thick complete all as specified and shown on drawing.FD/E6/MAP/12 (Chair writing cushioned)

Removing unserviceable back and providing new back as per existing size made out 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. Back form shall be designed with contour lumber support for extra comfort with PVC lipping all around as specified and shown on drawing.FD/E6/MAP/12 (Chair writing cushioned)

Removing the unserviceable arm rest of chair writing and providing new arm rest made of black integral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant & both hand rest sections to have slope towards front and as shown on drawing. FD/E6/MAP/12 (Chair writing cushioned)

Removing dents of following steel furniture articles including removing bends and preparation of surfaces for painting including putty work to smoothening the surfaces and painting complete as directed by Engr-in- charge. (make of paint shall be Asian/Berger/Nerolac) Note- colour of paint will be approved by Engineer-in-charge :-

Almirah large steel with shelves. FD-67, FD-243

Almirah med steel with shelves. FD-243, FD-1032

Locker bed side steel. FD-1029, FD-257

FMN set for Charpoy GI pipe FD-220

Rack side three spaces steel FD-1033

Book shelf open large steel. FD-69

Table office clerk steel. FD-1004

Table office officer steel. FD-1003

Table dining OR aluminium. FD-165M

Chair CB steel with arms. FD-75M

Chair CB steel without arms. FD-75M

Rack adjustable steel with 6 shelves . FD-1038

Chair CBA special. FD-75M

Stool steel 510mm. FD-81M

Table bed side steel. FD-157

Almirah large steel 1/2h x 1/2 S, FD-1033

Table steel 900x900, FD-1009

Rack shoe steel, FD/E6/MAP/02(R)

Preparation of surfaces of the following wooden furniture and applying one coat of french polish complete all as dierected. Note- colour of polish will be approved by Engineer-in-charge

Bed hard with ply top. DB-246

Chair writing. FD-280, FD-250

Chair dining. FD-279/228/16M

Chair easy. FD- 229,

Table peg. FD-25,FD-236, FD-277

Table dining 6 person. FD-30,FD-273,FD-239

Table writing Med. FD 249, FD-275

Table card. FD-91

Table 900x600 with and without drawers. FD-283, FD-284

Preparation of surfaces of the following wooden furniture and applying melamine polish by Asian paints/Nerolac/Berger paints stricty as per manufactures instructions. Note- Colour of polish will be approved by Engineer-in-charge

Chair dining cushioned. FD/E6/MAP/10 (R)

Chair dining long back. FD-357

Chair writing. FD-280, FD-250

Stool dressing CB. FD-282

Stool Dressing cushioned. FD/E6/MAP/14

Hat stand with mirror FD-233

Sofa set to seat three in 3 pcs , FD-373

Sofa set to seat four in 4 pcs, FD-373

Sofa set five seater in 3 pcs, FD-373

Sofa set to seat two in 2 pcs, FD-373

Table peg. FD-25,FD-236, FD-277

Table dining 6 person. FD-30,FD-273,FD-239

Teapoy. FD-34, FD-232, FD-225

Table dressing ladies with mirror. FD-251, FD-32

Table writing Med. FD 249, FD-275

Table dining 8 pers. FD-30,FD-273,FD-239

Table centre. FD-29, FD-235, FD-375, FD-274

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD