REPAIR OF FLOORING, JOINERY, SANITARY FITTINGS, ROOF SHEETS TO MARRIED AND OTM ACCN AT 14 GTC SUBATHU UNDER GE KASAULI

Amount

Schedule 'A' Section - I

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for first quality joint free Non Skid glazed ceramic tiles (coloured) 400x400x 7 to 8mm thick (square/ rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) complete all as specified and directed by Engr-In- Charge.

M&L for 1st quality, joint free glazed ceramic coloured tiles 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry @ 3.00 Kg / Sqm and pointed in white cement with pigment to match the shade of tiles, over 10mm thick rendering in CM 1:4, complete all as specified and directed by Engr-In- Charge.

M & L Vitrified ceramic tiles light shade 8-9mm thick (square/rectangular) polished area of each tiles exceeding 0.36 sqm in floors, set and jointed in neat cement slurry and pointed in white or colored cement to match with the tiles incl. 15mm thick screed bed or bedding layer in C.M 1:6 etc complete all as specified & as directed

All the same as per here-in-above but vitrified tiles of size on vertical surfaces such as skirting set and jointed in neat cement slurry and pointed in white or colored cement to match with the tiles incl. rendering 15mm thick in C.M 1:3 on brick work or concrete surfaces etc. complete all as specified & as directed

Supply and fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as dircted by Engineer-in-Charge.

Supply and fix in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as dircted by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads exc 1.50 sqm complete all as specified and as dircted by Engineer-in-Charge.

Supply and fixing 3mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil puty (or beading) in squares n.exc. 0.5 sqm in each pane complete all as specified and dircted by Engineer-in-Charge.

S & fixing factory made steel windows with side hung shutters including box type hinges with steel handle, tower bolt and steel peg stay complete with glazing bars all as specified.

-do- but steel window or ventilator, fixed type, with glazing bars -do- Note for item No. 10.00 & 11.00 : Glass required for fixing in window and ventilator will be measured and paid for separately under respective item of this schedule. However the quoted rate deemed to include for necessary fixing of glass

Supply only 3mm thick frosted glass any size complete all as specified.

All as per serial item No 12.00 here in before but 4 mm thick in squares exc.0.5 sqm in each pane-ditto-

Taking down chowkhats or frames with shutters (without taking off shutters) not exceeding 1.5 sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters) exceeding 1.5sq.m and not exc 4.00sq.m each of any description incl making good the disturbed surfaces complete all as specified & directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 sqm but n.exc 2 sqm from chowkhat and removing at site as equired complete all as specified & directed by Engineer-in-Charge.

Material & Labour for 2nd class hard wood as in plain, solid, straight chawkhats and frames, wrought framed rebated on the solid, rounded or chamfered , put to gather with glue pinned at joints complete all as specified & directed by Engineer-in-Charge.

Supply and fixing Factory made plain, framed, panelled shutters, 35mm thick of 2nd class hard wood (Hollock) with lock rail and panels of 9mm thick commercial ply or 12mm thick vaneered particle board with commercial veneered on both sides, incl priming coat, duly hammer marked. The size of rail & style shall be as per IS 1003 part-1 kiln seasoned and chemically pressure treated incl one coat of pink primer complete all as specified & directed by Engineer-in-Charge.

S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of door shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) complete all as specified and directed

S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of window shutters as specified in SSR Part-1, complete all as specified and directed. .

S & F factory made Solid PVC door frame of size 50 mmx 47 mm made out of 5mm wood grain printed PVC sheet reinforce with M.S square tube as per specification complete all as specified and directed by Engr-in-charge.

S&F factory made soild PVC moulded door shutter 28 to 30 mm thick (stiles) with 2.4 (or) 6 rails panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurethen painted on the front face and 2 mm plain PVC sheet on back face with partical bpard core etc specified and directed by Engr-in-charge.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles on forming to Fe-290 Gde-E-165 complete all as specified.

Material & Labour for Plain Cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in presserd steel frame and the like finished fair and even incl necessary form work complete all as specified & directed.

Supply only sheet glass ordinary quality 3mm thick and glazing with oil puty or fixed with wdn beads in squares n.exc. 0.50 sqm in each pane complete all as specified.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

Supply and fixing Mild steel butt hinges medium weight , clod rolled, 100mm, ISI marked, complete all as specified & directed.

S & F Mild steel butt hinges medium weight , cold rolled, 75mm, ISI marked, complete all as specified and directed .

Material & Labour barrel tower bolts aluminium anodised extruded section of size 200 mm complete all as specified & directed.

Material & Labour barrel tower bolts aluminium anodised extruded section of size 150 mm complete all as specified & directed.

Supply and fixing aluminium fabricated type extruded handles of size 125 mm complete all as specified & directed.

Supply and fixing aluminium fabricated type extruded handles of size 150 mm complete all as specified & directed.

Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.

Supply and fixing 200 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing cleap of sheet, cast or extruded sections, bolt not less then 12mm dia with and including a minimum of 6 bolt and nuts ,fixed on plate or staple plate complete all as specified & directed.

M&L preparing new surfaces of wood or wood based material exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink wood primer.

Preparing surfaces of wood and wood based materials steel and iron work, new or old of any description and girth, not other wise described & treated with tar or coal tar black paint and treating ends of posts or back of chowkhats etc area tarred exc. 0.1 Sqm but n.exc. 0.50 Sqm each.

Demolition of brick or stone masonary built in cement mortar incl all quoins, arches, pillar etc. complete all as specified & directed.

Material & Labour brick work with sub class 'B' bricks of class designation 10 all as per IS-1077-1992 (minimum compressive strength of brick 100 kg/Sqcm) old size bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6, complete all as specified & directed.

Dismantling plain or corrugated steel sheeting any guage thickness incl Nainital pattern as in roof covering complete all as specified.

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges etc. fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required complete all as specified & directed.

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges, flashing, eaves board valley gutter of any shape etc, cut to designed shape (Jhhallar) as directed at site fixed all as per manufactures's instructions and fixed with self thread making steel screws of length not less than 50mm as directed by Engr-in-Charge at site with suitable arangement as required complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, otching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M&L for framed work such as grills, gratings, etc with ends of bars sholderedcand /or riveted or forged into spikes, framed guard bars,barred iron dooes,ladders, framed balustereds, walk ways railing frameworks of water tank and similar works all as specified and as directe.

Dismantling timber scantling un framed work 40 sq cm and over in section in any position, unframed work complete all as spd.

M & L 2nd class HW clean Sawn timber scantling/posts complete all as specified.

S&F Anodised aluminium frame for doors, windows, ventilators of powder coating minimum thickness of powder coating 50 micron with one or more rebates including joining cleat forfixing etc. complete all as specified

S&F Powder coatedAnodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F sheet glass 5.5 mm thick tinted glass in square exc 0.5 sqm in each pain complete all as specified and directed by Engr-In- Charge.

Supply and fixing bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed (minimum weight 90gms ) for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply and fixing bib cock with flange cast copper alloy chromium plated, fancy type, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed.

Supply & fixing 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe, fixed as in repair complete all as specified and directed.

S & F in repair stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup (concealed type)

S & F in repairs Stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

Supply & fixing in repairs brass chromium plated tubular towel rail 20mm dia 'D' type 60 cm long between flanges complete all as specified

Supply & fixing 15mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for 15mm bore iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.28 kg as approved, fixed as in repairs complete all as specified and directed.

Supply & fixing 20mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.45 kg as approved, fixed as in repairs complete all as specified and directed.

Supply & fixing for 15 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) fixed as in repairs complete all as specified and directed.

Supply & fixing for 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) fixed as in repairs complete all as specified and directed.

Supply and fixing central hole Basin Mixer,washbasin/bathroom/kitchen without poupwaste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed.

Supply & fixing chromium plated shower rose with or without swivel joints 100mm dia including fixing to steel pipe, fixed as in repairs complete all as specified and directed.

Supply & fixing of PVC waste down pipe of 40mm bore complete all as specified and as directed.

Supply & fixing of PVC waste down pipe of 32mm bore complete all as specified and as directed.

Supply and fixing 15mm dia PVC connection with PTMT nut, of length 450mm, fixed as in repairs complete all as specified and directed.

Supply and fixing 15mm dia PVC connection with PTMT nut, of length 750mm, fixed as in repairs complete all as specified and directed.

Supply and fixing PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing complete all as specified & directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed.

S & F in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 15mm bore iron pipe.

S & F in repairs gun metal globe or gate valve with iron wheel heads screwed both ends for 20mm bore iron pipe

Material and labour for sink with drainage board made out of stainless steel sheet 1.0mm thick with plug, washers and wastes, overall size 915mm x 460mm, bowl size 410mm x 330mm x160mm incl fixing cantilever brackets and connection to union, pipe, fixed as in repairs complete all as specified and directed.

Supply & fixing wash hand basin, vitreous china, white, decorative type, flat or angle back, size 550mm x 400mm incliding cutting for and pinning in ends of brackets or erecting stand but exclusive of piller tap fancy type and waste pipe, fixed as in repairs complete all as specified.

Vitreous china squatting pan, "Orissa pattern" of size 580 x 440 mm white with integral foot rests, cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan, flushing cistern, flush pipe, PVC connection for water supply to flushing cistern etc complete fixed in repair.

Dismantling of water tanks exc 250 ltrs capacity but not exc 500 ltr capicity and removal at site.

Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including ball brass valve 20mm bore complete all as specified.

Dismantling of water tanks exc 500 ltrs capacity but not exc 1000 ltr capicity and removal at site

Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered hoisted and fixed in position, including ball brass valve 20mm bore complete all as specified.

Disconnecting water tank exc 250 & nexc 500 ltrs existing tanks, setting aside (or lowering if required) forrep airs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Disconnecting water tank exc 500 & nexc 1000 ltrs existing tanks, setting aside (or lowering if required) forrep airs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.vxc 250 & nexc 500 capacity water tank

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.vxc 500 & nexc 1000 capacity water tank

S& F in repairs Viterious china toilet paper holder colour all as specified and as directed.

S&F Grating square 150 mm size of PTMT (Minimum weight 100gms) all as specified and as directed.

Taking up or down 15 mm dia steel tubing and connection including cleaning for refixing or removal at site directed by Engr-In Charge.

Taking up or down 20 mm dia steel tubing and connection including cleaning for refixing or removal at site directed by Engr-In Charge.

Supply and fixing 15mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as specified & directed.

Supply and fixing 20mm bore tubes "medium grade" galvanized with and incl all fittings complete to walls and ceiling or laid in floors complete all as spd & directed.

Refixing old 15mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed.

Refixing old 20mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed.

Refixing old 25mm GI tubing and connections on new or old position (wall,ceilings, floor etc. complete all as specified and directed.

Supply fixing in repairs viterous china wash down water closet pan (pedestal patten),white with flushing cistern , brackets and flushing pipe, seat cover, complete and making all necessary connection to make the system fully functional, complete all as specified and as directed .

Supply fixing Health faucet (ABS body) mild steel chromium plated sutable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as respect as specified

Supply fixing Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) and fixed in position complete all as respect as specified

Supply fixing Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) and fixed in position complete all as respect as specified

Supply fixing Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) and fixed in position complete all as respect as specified

Supply fixing Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) and fixed in position complete all as respect as specified

Supply& fixing Soap dish, any type, fixed to plugs with chromium plated brass screws and fixed in position complete all as respect as specified

S&F in repair Material and labour for false ceiling with one layer of 'LaGyp' standard boards manufactures by M/S Lafarge Board Gypsum India Pvt Ltd, at all height and levels. Standard boards of size 1220x1830x12.5mm, standard board to be laid on 'LaGyp' universal channel (web 45 mm premanunfacturers specifications metal comprising of "LaGyp" universal channel (web 45 mm and flange 27mm base metal thickness (BMT) 0.55 mm and length 3660 mm to be used as main channel as well as ceiling channel. "LaGyp" connecting clips, perimeter channel ( Size of web 28 mm, flange 18/30 mm and length 3660 mm, MBT 0.55 mm) and "L" angle (Lenght 3050 mm BMT 0.55 mm) with finally the board are to be Jinded and finished so as to have a flush look with which includes filling and finishing the tepered and square edges of the board with "LaGyp" easy joint Gypsum based jointing compound, "LaGyp" paper tape. The rate should include providing and laying two or more coats of oil bound distemper to give a neat and even finish including preparing the base with primor and scaffolding etc complete in all respect complete all as specified and as directed by Engr-In-Charge

Supply & fixing pre-laminated particle board 19mm thick, interior grade pre laminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber / steel frame work as in shelves or shutters or wall panelling, fixed as in repairs complete all as specified and directed.

Material & labour piano hings, mild steel bright finish width of flap 30mm fixed in repair including taking out the existing complete all as specified and directed

Supply & fixing magnetic catches 100 mm brass body for use in cup boards of kitchen, ward robes etc. fixed as in repairs complete all as specified and directed.

Supply & fixing 40mm dia cupboard knob of brass, polished, fixed with nut screw and washer, fixed as in repairs complete all as specified and directed.

M&L for repair to roof leckage by using 100mm wide STP flash strip complete all as specified

M&L for repair to roof leckage by using 50mm wide STP flash strip complete all as specified

Amount of credit of Rs. 147588.10 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.

M/S Trilok chand sharma

Durga Construction

M/s Parmod Kumar

karambir constructions

AUKTA ENERGY PRIVATE LIMITED