REP TO TOILET BATHROOM SANITARY FITTINGS FLOORING JOINERY INT AND EXT FINISHES AND OTHER MISC B/R WKS, CLEANING OF SEWAGE LINE MANHOLE AND SEPTIC TANK HARD STANDING AND OTHER MISC WK AT HQ NTG /NLC TRIVENI MD ACCN VARUNA OFFR ENCLAVE UNDER GE (N) BAN

Amount

Demoltion of Cement Concrete (Un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each including making good the disturbed surface etc complete all as specified and as directed

M&L for Plain cement concrete (1:4:8) type D- 2 using 40mm graded stone aggregate as in 75 mm thick sub base to flooing etc complete all as specified and as directed

M&L for Plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in 25 mm thick levelling course of flooing etc complete all as specified and as directed

M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in 75 mm thick plinth protection etc, finished even and smooth without using extra cement including joints filling with sealing compound Grade "A" complete all as specified and directed.

M & L for Vitrified Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M & L for Vitrified Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick backing coat in cement mortar (1:3) including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) including dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for screed bed or bedding layer 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for Cement concrete designer chequered tiles exterior grade, coloured glossy finish rubber pressed, of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

M&L Glazed ceramic coloured tiles 350X 250X 7mm / 450X 350X 7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat 10 mm thick in CM 1:4 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed

M&L for rendering 5 mm thick in cement mortar (1:3) over fair faces of ceiling concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 10 mm thick cement mortar (1:6) on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 15 mm thick cement mortar (1:4) on other than fair faces of brick work or stone masonry surface finsihed even and smooth without using extra cement mixed with water proofing compound etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Supply only Liquid water proofing compound, ISI marked, complete all as specified and as directed.

S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed

S&F Sheet glass 4mm thick of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

S&F Figured glass 4mm thick, pin head type and glazing with oil putty in squares not exc 0.5 sq.m in each pane etc omplete all as specified and as directed

S&F in repair Sink made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed

S & F in repair Vitreous china wash down european type water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed

S&F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, stainless steel waste coupling 32 mm bore and LDPE pipe 600 mm long complete all as specified and directed.

S&F in repair PVC flushing low level cistern with flush out valve of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all as specified and as directed

S&F in repair Bib taps 15mm dia fancy type, brass Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed

S&F in repair Mixer 15mm bore dia brass chromium plated, mixing hot and cold water screwed down for iron pipe etc complete all as specified and as directed

S&F in repair Angle / Stop / Concealed cock 15mm dia, Fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed

S&F in repairs shower rose 100mm dia with swivel joint, brass Chromium plated fixed to 15 mm dia bore pipe or union etc complete all as specified and as directed

S&F in repairs Bathroom Cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall complete all as specified and as directed

S&F in repairs Stainless steel plate rack of size 900mm x 900mmx250mm using Stainless steel sheet 0.63mm thick including fixing to wall as directed etc complete all as specified and as directed

S&F in repairs stainless steel Grab bar Towel rail 450 mm long, D shaped including fixing arrangement etc complete all as specified and as directed

S&F in repairs stainless steel towel ring 200mm dia including fixing arrangement etc complete all as specified and as directed.

S & F CPVC pipes 20mm external dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down existing GI / CPVC pipe line etc complete all as specified and as directed.

S & F CPVC pipes 25mm external dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI / CPVC pipe line etc complete all as specified and as directed.

S&F in repairs rotational moulded polythelene water storage tank 1000 ltrs capacity three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including ball float valves 25 mm dia of bore high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed

S & F in repairs gun metal, globe or gate valve 25 mm with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F in repairs PVC (SWR) Multi floor trap 75 mm dia outlet, plain with grating including jointing with solvent cement etc complete all as specified and as directed

S&F PVC (SWR) pipes 110 mm dia bore, single socketed in any length with rubber ring joint fixed on walls etc including dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC (SWR) pipes 75 mm dia bore, single socketed in any length with rubber ring joint fixed on walls including dismantling of existing pipe line and fittings etc complete all as specified and directed

S&F PVC (SWR) bends 110 mm dia (any radius) etc complete all as specified and as directed

S&F PVC (SWR) bends 110 mm dia (any radius) with acess door etc complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) 110 mm dia bore equal or unequal etc complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) 110 mm dia equal or unequal with access door etc complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia bore (any radius) etc complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia bore (any radius) with acess door etc complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) 75mm dia bore equal or unequal etc complete all as specified and as directed

S&F PVC (SWR) Junction (Single T) equal or unequal 75mm dia with access door etc complete all as specified and as directed

S&F PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal 110 mm dia etc complete all as specified and as directed .

S&F PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal 75mm dia bore etc complete all as specified and as directed .

S&F in repairs PVC (SWR) vent cowls suitable to 110 mm dia bore pipe all as specified and as directed .

S&F in repairs PVC (SWR) vent cowls suitable to 75mm dia bore pipe all as specified and as directed .

Complete removal of existing treatment of wall surface (Internal and External) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed

M&L for preparation of surface with sand paper and applying 2mm thick wall care putty on surface of wall including finish to smooth surface complete all as specified and as directed

M&L for preparing newely plastered ceiling surface and applying three coat of white wash etc complete all as specified and as directed

M&L for Preparing Old treated ceiling surface and applying one coat of white wash etc complete all as specified and as directed

M&L for Preparing new plastered suface of walls and applying two coats acrylic distemper emulsion, white or tinted over a coat of alkali resistance primer complete all as specified and as directed

M&L for Preparing old treated suface of walls and applying two coats acrylic distemper emulsion, white or tinted complete all as specified and as directed

M&L Preparing new /Old treated / untreated surface of wall and Applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturers instructions complete all as specified and as directed.

S&F in repairs stainless steel decorative curtain rod of 25 mm bore with wood finishes (weight not less 400 gms per running meter) including fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed

S&F in repair designer Bracket for curtain rod of dia 25 mm dia made out of stainless steel Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

Removal of sludge from septic tanks / manholes of any size and depth and burying the sludge in pits with suitable depth & filled by earth and removal of surplus soil including dewatering of water complete all as directed to a place as earmarked by state authority out side the defence land . Note - Dewatering of water or mud will not be measure & paid. Only removal of sludge will be measured & paid.

Clearing & removal of blockage of any type in WC, bathroom, kitchen including floor/nahani traps, soil waste/vent pipes gully trap upto 1st manhole, in any situation by way of cleaning / desludging and removing foreign materials to a place as earmarked by state authority out side the defence land to the entire satisfaction all as directed. Note : Cleaning and removal of blockage in one quarter may will be treated as one complaint. Nothing extra shall be admissible on this account

Clearing & removal of all blockage in sewage line from manhole to manhole up to 150 mm dia of sewer lines, in any situation by way of cleaning / desludging foreign materials as well as blockage of sewage line in between successive manholes manunally / mechanically including desludging of sewage line where required and odered by Engineer-in-charge and keeping sewer line functional, upto final drop/outlet into septic tank /central sewage system terminating in other joining zone/ area or into sewage wells complete all as specified. NOTE:- a) Contractor shall detail his supervisor to office of AGE B/R MEG daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area under this contract.

(b) Contractor shall provide minimum 1-SWEEPER & 1-HELPER for attending (NTG/NLC/Triveni/Varuna) as and when complaint received alongwith all requisite tools, equipments, including all safety measures (i.e safety shoes, gloves, googles, mask, helmet etc) for attending complaint and ensure completion report by 5.00 PM same day. (c) All the complaints relating to sewage line shall be attended within same day (within 12 hour). In case of blockage in sewage line could not be detacted/completed same day and concerned JE / Engineer-in-Charge is satisfied to the efforts applied but the same shall be attended and all blockage must be cleared by 24 hours (next day by 5.00 PM) without fails. (d) In case any complaint pertaining to clearing of blockage in sewage line is not removed /cleared within 24 hours (next day 5.00 PM). A penalty @ Rs. 200/- per complaint shall deducted from contractor payments.

Mechanically pumping out sewage liquid from septic tanks/manholes of any size and depth and removal the same to distance/place as earmarked by state authority out side defence land including any type of T & P required etc. dewatering of water complete all as directed.

Taking down cement plaster any description on brick or stone walls and including wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor, 150 mm internal dia of pipe, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in hard / dense soil etc complete all as specified and directed

M&L for plain cement concrete (1:4:8) type D-2 using 40 mm grades stone aggregates as in foundations and mass concrete etc complete all as specified and as directed

M&L for Pre-cast cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in solid block masonry exceeding 10 cm in width and setting in mortar 1:4 including demolition of block/brick work etc complete all as specified and as directed

M&L for Plain cement concrete (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in copings, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed

M&L for Plain cement Concrete (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in surface channels and drains etc complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to 150 mm dia bore drain pipes including packing under and haunching against the sides of pipe after they are laid & tested complete all as specified and directed.

M&L for laying of Double Wall Corrugated HDPE Sewage pipes line 150mm Inner dia bore of pipe class SN-8 including sealing of joints, fittings etc complete with collars complete all as specified and directed

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for rendering 10 mm thick cement mortar (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for Pre-cast cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in cement mortar (1:6) including dismantling of existing RCC of any description etc complete all as specified and directed.

M&L TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

S&F for cement concrete designer chequered tiles exterior grade, coloured glossy finish rubber pressed, of size 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over and including Screed bed or bedding layer of mortar 15mm thick cement mortar (1:6) including demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed.

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment laid over & including 50 mm thick M Sand cushioning including demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed

Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed

Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Removing building materials etc.to a distance of exc 1.0 KM but not exc 1.50KM, beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed Note : 1metric tonne=1load, 1cum = 1735kg

M/S POTHIRAJ AND CO (BID ID -3488528)

Sathya Sri Construction (BID ID -3489729)