Repair of Bhaddi Distribution system Offtaking at tail of Rising main scheme-1 of kandi canal stage -2

Amount

WATER SUPPLY

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.

((a)) Earth work upto 1.5 m. Depth for

(ii) For Ordinary soil having gravel upto 40%

(10) Supplying and fixing of ISI Marked CI D-joint (complete with nut, bolts & rubber ring) as per IS:8794 for repair of pipe line including cutting , jointing and testing etc. but excluding cost of excavation complete.

(29) Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete.

((d)) C.I Single air valve screwed (Size 50mm)

(66) Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department.

(a) Size 0.6 m. x 0.6 m.

(b) Size 0.9 m. x 0.9 m.

Supplyand fixing of 160 mm dia. Socketed upvc pipe ISI mark confirming to ISI 4985 2.5 kg/cm2 pressure

Supply and Fixing of 180 mm dia Socketed upvc pipe ISI mark confirming to ISI 4985 2.5 kg/cm2 pressure

Supply and Fixing of 200mm dia Socketed upvc pipe ISI mark confirming to ISI 4985 2.5 kg/cm2 pressure

Supply and Fixing of 225mm dia Socketed upvc pipe ISI mark confirming to ISI 4985 2.5 kg/cm2 pressure

Providing & Fixing of CI/DI Flange end , stem of SS(AIS1410) and Bronze (Gunmetal) working part sluice valve ISI marked 14846 -2000 including jointing, testing and cost of nut, Bolt and inseration sheet, all cariage complete with the approval of Engineer-In-Charge B Class PN 1.6 as per ISI.150 mm i/d sluice valve flanged

Providing & Fixing of CI/DI Flange end , stem of SS(AIS1410) and Bronze (Gunmetal) working part sluice valve ISI marked 14846 -2000 including jointing, testing and cost of nut, Bolt and inseration sheet, all cariage complete with the approval of Engineer-In-Charge B Class PN 1.6 as per ISI. 200 mm i/d sluice valve flanged

Providing & Fixing of CI/DI Flange end , stem of SS(AIS1410) and Bronze (Gunmetal) working part sluice valve ISI marked 14846 -2000 including jointing, testing and cost of nut, Bolt and inseration sheet, all cariage complete with the approval of Engineer-In-Charge B Class PN 1.6 as per ISI. 250 mm i/d sluice valve flanged

Supply and fixing of 160 mm dia. Alpha valve including carriage, re handling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge

Supply and fixing of 180 mm dia. Alpha valve including carriage, re handling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge

Supply and fixing of 200 mm dia. Alpha valve including carriage, re handling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge

Supply and fixing of 225 mm dia. Alpha valve including carriage, re handling, loading , unloading , testing etc. complete in all respects as per PWD specifications or instructions of the Engineer-in-charge

BRICK WORK

(11.7) First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth

PLASTERING & POINTING

(15.9) 12.5 mm thick cement plaster 1:4

CONCRETE

(10.13) Cement concrete 1:2:4

(10-10.13-a(1)) mixing by manual means

Providing & fixing uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.160 mm dia.

Providing & fixing uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.180 mm dia.

Providing & fixing of 200 mm dia. uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Providing & fixing of 225 mm dia. uPVC Bend (6 kg/cm2 pressure) conforming to IS codes with latest amendments if any at site of work including loading, unloading and rehandling if any complete in all respects as per design and P.W.D. specifications and instructions of engineer in charge.

Supply & fixing of dia of 160 mm UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS codes with latest amendments if any at site of work.

Supply & fixing of dia of 180 mm of UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply & fixing of 200 mm dia. equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of 225 mm dia. UPVC equal-Tee of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of 160-180 mm UPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of 180-200 mm UPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of 200-225 mm UPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of 225-180 mm UPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing of 200-160 mm UPVC reducers/increase of 6 kg/cm2 pressure conforming to IS-codes with latest amendments if any at site of work.

Supply and fixing 0f 160 mm dia. flange tail end point with CI flange inculding carriage rehandling loading and unloading , testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge

Supply and fixing of 200 mm dia. flange tail end point with CI flange inculding carriage rehandling loading and unloading , testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge

Supply and fixing of 250 mm dia. flange tail end point with CI flange inculding carriage rehandling loading and unloading , testing etc. complete in all respects as per PWD specifications or instructions of Engineer-in-charge

Supply and fixing of 160 mm dia. socket including cariage , re-handling loading unloading testing etc.respect as per PWD specifications and instructions of the Engineer-in-Charge

Supply and fixing of 180 mm dia. socket including carriage , re-handling loading unloading ,testing etc.respect as per PWD specifications and instructions of the Engineer-in-Charge

Supply and fixing of 200 mm dia. socket including cariage , re-handling loading unloading ,testing etc.respect as per PWD specifications and instructions of the Engineer-in-Charge

Supply and fixing of 225 mm dia. socket including carriage , re-handling loading unloading , testing etc.respect as per PWD specifications and instructions of the Engineer-in-Charge

STEEL AND IRON WORK

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

any other item

RAJ KUMAR