C/O BO Quarter at Sunni in Forest Division Shimla

Amount

Bush Cutting uprooting veg9itation etc.

Cutting in earth work and disposal of excavated earth upto a lead of 20mtrs. 1/2 Pick 1/2 Jumper work

Excavation in foundation, trenches etc. in earth work, lift upto 1.50 mtrs. Stacking the excavated soil not more than 3 mtrs. Clear from the edge of excavation and that returning the stacked soil in 15cm layers, where required, into plinth sides of foundation etc. consolidation each deposited layers by ramming and watering and then disposing of all suplus excavated earth as directed within a lead of 20mtrs. In 1/2 Pick & 1/2 Jumper work

stone soling properly hand packed filing and consolidation with power road roller to the required grade and camber i/c spreading watering and rolling of binding material murum & earth etc. b) above 100 mm thick.

Laying of cement concrete 1:6:12 in foundation, under floors and pavement i/c ramming & curing complete.

R.C.C. work 1:2:4 (1 cement, 2 sand & 4 stone balast 20mm nominal size) i/c curing complete but excluding cost of from work & reinforcement in.

Main building Pillars (0.90x0.90=0.81)+(0.23x0.23=0.053)/2=0.432m2

Providing form work of ordinary timber plan- king so as to give rough finish i/c centering & shutering, structting and proppeng etc. height of propping and cement below supporting floor to celling not exceeding 4mtrs. And removal of the same for in situreinforced. concrete & plain concrete work in:- Beams, Cantilevers, lintels etc. not exceeding 1mtrs.

Foundation foting, bases of columns, etc. mass concrete. Pillars

Square of rectangular columns, pillars, post & struts.

Centring and shuttering for flat surface such as slabs, shelves & balconies etc. i/c assembling, errection, dismentling, cleaning & stacking etc.

Beams, Cantilevers, lintels etc. not exceeding 1 mtrs. In depth.

R.C.C. work 1:2:4 (1 cement, 2 sand & 4 stone balast 20mm nominal size) i/c curing complete but excluding cost of from work & reinforcement upto floor two level. In Pillars

R.C.C. work 1:2:4 (1 cement, 2 sand & 4 stone balast 20mm nominal size) i/c curing complete but excluding cost of from work & reinforcement upto floor two level. In Plinth & Ceiling

Mild steel/tor steels rein-forcement for R.C.C. work i/c bending & binding placing in position complete upto floor two level.

Brick masonry in cement mortar 1:6 in super structure upto 3 mtrs. Hieght from plinth level i/c curing complete.

Half brick masonry in 1:4 cement mortar upto floor two level i/c curing complete.

Wood work in frames, of doors, windows cler storey windows and other frames and fixed in position in first class Deodar wood. Deodar wood

Preparation and fixing of 40mm thick panelled glazed or panelled glazed shutter for doors, windows and clerestorey wondows i/c black enameelled iron butt hinges with necessary screws fitting in first class Deodar wood. In Door & Cup Board

Preparation and fixing of 40mm thick glazed shutter i/c glass (like wire gauge shutters) for windows and clerestorey wondows i/c black enameelled iron butt hinges with necessary screws fitting in first class Deodar wood.Window & Vantilator

Prreparation and fixing wire gauge shutters using galvanised with M.S. wire gauge of I.S. designation 85G wire of dia 0.56mm for doors & windows and clerestorey window i/c bright finished/black enamelled iron hinges with necessary screws 30 to 40mm thick.

Wood work in frames of false celling partition etc. and fixed in position in first class Deo wood.

Preparation and fixing wooden plank ceiling with tongued and grooved jointing and wood screws (frame work/cover fillets to be measuresd and paid for separately). With 12mm to 20mm thick of Deo wood.

Preparation and fixing plain lining with tongued an d grooved jointing and screws (frame work/cover fillets to be measuresd and paid for separately). In Deo wood

P/ F S.S. grills of required pattren in wooden frame windows etc. with M.S. flats/square or round bars with round headed bolts and nuts or by screws i/c red oxide priming coat (with material).

M.S. flat/bar, angle/squre iron & round M.S. pipe etc. @12 kg/m2

Corrugate G.I. colored sheet roofing 60 to 68mm fixed with L & L hooks 19mm dia G.I. limpet and bitumen of washers complete.

Making and fixing of ridges or valleys of plain

Steel work bolted built up section i/c cutting hoisting fixing in position nad applying priming coat of red lead paint in trusses and trussed purilins in building.

M.S. Sheet 18 B.G. for projection ceiling & eaves board fixing with angle Iron 35x35x4mm.

Angle Iron 35x35x4mm @ 10Kg/m2

Fixing anodied sliding door bolt anodizedd transport or dyed to required colour and shade with bolts and nuts screws etc. complete 300x16mm or 250x16mm.

Fixing tower bolt (barrel type) -do- D 300x10mm or W250x10mm.

Fixing handles -do- As per above item

Fixing of M.S. hooks and eyes.

15 mm thick cement plaster in 1:5 (cement: sand in respective ratios) in fair / rough side of brick walls for plastering up to floor two level i/c arises, internal rounded angles, chamfers and / or rounded not exceeding 10mm in girth and finished even and smooth i/c scaffolding.

5 cm (2") thick cement concrete flooring 1:2:4 (1 Cement :2 sand and :4 stone ballast 12mm & down gauge) finished with a floating coat of neat cement.

White glazeld tiles 6mm thick in flooring, skriting, treads of steps and landing laid on a bed of covering of 12mm (1/2") thick cement mortar 1:3 finished with flush painting in white cement.

White glazeld tiles 6mm thick in flooring, skriting, treads of steps and landing laid on a bed of covering of 12mm (1/2") thick cement mortar 1:3 & Joined with white cement slurry.

Making plinth protection 50mm thick in cement concrete in 1:3:6 (1 Cement :3 sand :6 20mm ballast i/c finishing the top surface of concrete smooth.

Construction of open suface drain in H.D.C.R. stone masonry 15x23cm Ushape in cement mortar 1:6 and inside plastering 20cm thick with cement mortar 1:3 i/c earth work and laying 10cm thick cement concrete 1:5:10 and 7.5cm thick cement plaster 1:3 and finished with floating coat of neat cement.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with ename/ready mixed/coaltar paint brushing to give an even shade i/c cleaning the surface of all dirt, dust and other foreign matter.

Applying primary coat over new wood and wood based surface after and i/c preparing the surface by throughly oil grease, dirt and other foreign matter (ready mixed primer/enamel primer/wood filler transparent liquid for varnish).

Painting two coats (excluding priming coat) on new steel and other metal surfaces with ename/ready mixed/coaltar paint brushing to give an even shade i/c cleaning the surface of all dirt, dust and other foreign matter.

Wall painting two coat with oil bound interiar & exteriar weather proof snowcem of approved quality and shade on un-decorated wall surface to give an even shade i/c thoroughly brushing the surface free from all dier, dust foreign matters and sand papering i/c scaffolding.

60% oil bound

40% snowcem

Pradeep verma

BHUSHAN THAKUR