Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.0 LAccepted-AOC 39 288 THANGAMAPURI PATTINAM METTUR DAM 636 402 | METTUR DAM | SALEM | TAMIL NADU | 636402 | ₹4.0 L Quoted ₹3.8 L | L1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | mettursrikrishna enterprises L1 |
|---|---|---|---|---|
| 1.00 | Charges for removal of local pressure gauges/ temperature gauges and refixing them after calibration in Turbine & Generator areas. | 50 | Nos | 450 ₹22,500 |
| 2.00 | Charges for removal of pressure/ Vacuum/flow switches and refixing them after calibration in Boiler, Turbine and Generator areas. | 50 | Nos | 450 ₹22,500 |
| 3.00 | Charges for removal of existing transmitters including disconnecting the control cables, removal of clamps and manifold and refixing after calibration in Boiler, Turbine and Generator areas. | 25 | Nos | 450 ₹11,250 |
| 4.00 | Charges for dismantling, cleaning & replacement of gaskets and re-fitting of level switches. | 25 | Nos | 2,100 ₹52,500 |
| 5.00 | Charges for cutting of existing flange from stand pipe (4.5 inch) of HP Heaters stand pipe, grinding the surface in stand pipe, Welding of new flange in the stand pipe, providing new metallic gasket for new flange, fixing of new guided wave radar level transmitters. | 3 | Nos | 2,900 ₹8,700 |
| 6.00 | Charges for removing and refitting of accessories in pneumatic control valves & dampers such as E/P converters, air lock relay, air regulators, positioners and position feedback transmitters sending to lab for testing and receiving the tested instruments from lab. | 54 | Nos | 2,000 ₹1.1 L |
| 7.00 | Charges for Replacement of HAD/CAD cylinder (8" Bore and 8 " stroke ) which involves following works.i) Removal of existing pneumatic cylinder and its accessories with copper tubings from its location to pocket store.ii) Loading, transporting and unloading of new pneumatic cylinder from central store to field location.iii) Fixing the new pneumatic cylinder and refixing the accessories such as air regulator, I/P converter with SS tubings. | 2 | Nos | 5,350 ₹10,700 |
| 8.00 | Charges for Replacement of burner tilt cylinder(10" Bore and 16 " stroke) which involves following works.i) Removal of existing pneumatic cylinder and its accessories with copper tubings from its location to pocket store.ii) Loading, transporting and unloading of new pneumatic cylinder from central store to field location.iii) Fixing the new pneumatic cylinder and refixing the accessories such as air regulator, I/P converter with SS tubings. | 1 | Nos | 6,513 ₹6,513 |
| 9.00 | Removing the terminal connections, Replacing the broken Terminal Blocks and reconnecting the terminal connections and checking in Various Junction boxes at Boiler and mill area . | 300 | Nos | 52 ₹15,600 |
| 10.00 | Charges for opening and cleaning of ½” impulse lines and catch pots in mills, Flue gas, primary and secondary air paths. | 110 | Nos | 400 ₹44,000 |
Tender Value
Refer Docs
EMD Value
₹3,400
Closing Date
3 Oct 2025, 2:00 pmClosed
CHIEF ENGINEER/MTPS-I
CHIEF ENGINEER MTPS-I METTUR DAM
MTPS-I ES Circle CI Division UnitIII Removal and refixing of Pressure gauges, Temperature gauges, Switches, Transmitters after calibration Replacement of Pneumatic cylinders and gaskets for all level switches -Cleaning of impulse lines and catch po
2025_EB_604771_1
CE-MTPSI-SE-ES-CI-OT73-25-26
Open Tender
Electrical Works
20 days
MTPS-I/METTURDAM
AS PER TENDER SPECIFICATION
4 documents required · 4 mandatory
₹0
₹3,400
Yes
15 May 2026
16 Sept 2025
4 Oct 2025
16 Sept 2025
3 Oct 2025
16 Sept 2025
Amount
Charges for removal of local pressure gauges/ temperature gauges and refixing them after calibration in Turbine & Generator areas.
Charges for removal of pressure/ Vacuum/flow switches and refixing them after calibration in Boiler, Turbine and Generator areas.
Charges for removal of existing transmitters including disconnecting the control cables, removal of clamps and manifold and refixing after calibration in Boiler, Turbine and Generator areas.
Charges for dismantling, cleaning & replacement of gaskets and re-fitting of level switches.
Charges for cutting of existing flange from stand pipe (4.5 inch) of HP Heaters stand pipe, grinding the surface in stand pipe, Welding of new flange in the stand pipe, providing new metallic gasket for new flange, fixing of new guided wave radar level transmitters.
Charges for removing and refitting of accessories in pneumatic control valves & dampers such as E/P converters, air lock relay, air regulators, positioners and position feedback transmitters sending to lab for testing and receiving the tested instruments from lab.
Charges for Replacement of HAD/CAD cylinder (8" Bore and 8 " stroke ) which involves following works.i) Removal of existing pneumatic cylinder and its accessories with copper tubings from its location to pocket store.ii) Loading, transporting and unloading of new pneumatic cylinder from central store to field location.iii) Fixing the new pneumatic cylinder and refixing the accessories such as air regulator, I/P converter with SS tubings.
Charges for Replacement of burner tilt cylinder(10" Bore and 16 " stroke) which involves following works.i) Removal of existing pneumatic cylinder and its accessories with copper tubings from its location to pocket store.ii) Loading, transporting and unloading of new pneumatic cylinder from central store to field location.iii) Fixing the new pneumatic cylinder and refixing the accessories such as air regulator, I/P converter with SS tubings.
Removing the terminal connections, Replacing the broken Terminal Blocks and reconnecting the terminal connections and checking in Various Junction boxes at Boiler and mill area .
Charges for opening and cleaning of ½” impulse lines and catch pots in mills, Flue gas, primary and secondary air paths.
Charges for cutting and welding of takeoff catch pots in mills, flue gas, and primary and secondary air path.
Charges for replacement of defective 1” root valve in turbine area which involves the cutting and welding of 2 joints in 1” CS impulse line.
Charges for replacement of defective drain valve (3/8”) for high-pressure transmitter.
Charges for removing existing leaky 3/8” SS impulse line and worn out connectors, cutting and bending the new line as necessary, fixing SS connectors with nut and ferrule in the line and connecting back the new line without leaks in transmitters and actuators in services.
Charges for removal and refixing of all types of RTD/thermocouples.
Overhauling of servo Valves for HP/LP Bypass system
Overhauling of GV/ GLV 1" class 800/1500/2500 HO/MO. Charges for dismantling the valve, checking the seating surfaces. Cleaning all the parts. Lapping the disc with seat for perfect blue matching. Reassembling the valves with new gland packings and bonnet gaskets.
Copper Washer (Sl. No: 1)
Teflon O-ring (Sl. No : 3 )
Gasket (Champion 54 grade / Klinger 1000 grade) size 280 x 280 mm. (Work Sl. No: 4)
2.5 Sq.mm Elmax Terminal Block (Work Sl. No: 9)
2.5 mm CS welding rod electrode (90 Nos./Box) (Work Sl. No : 11,12)
Gas cutting for takeoff catch pot and 1/2” impulse line, bed etc… (Work Sl. No: 11)
High pressure drain valve. (Work Sl.No:13)
Pure graphite DMRP die mould gland Packing Ring (Cost Data code:TM-0828)(Work Sl.No: 17)
Consumable cost such as Teflon Tape, PVC Insulation tape, Cotton Waste, Emery Sheet, Glass putty, Rustolene, bolt and nuts, Anabond, etc. (Work Sl. No.: 1 to 17)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.79 MB
BOQ_722931.xls
BOQ • 0.36 MB
Download all tender documents and submit your bid