ED/15/PANDG/25-26/02

Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary). (Payment to be made on area cleared) P.W.D (Bldg.), .Page -268, Item no - 19

Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. [Ref:P.W.D.(Bldg.). Page- 1, Item-1]

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. [Ref:P.W.D.(Bldg.). Page- 11, Item-10]

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. (a) In ground floor including roof. [Ref:P.W.D.(Bldg.). Page- 10, Item-1.(a)]

Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. [Ref:P.W.D (Bidg). Page-12, Item No-13]

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. [Ref: P.W.D (Bldg.), Page -26, Item.- 10(i)] Annexure - II

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth [Ref : P.W.D.(Bldg.), Page-15 , Item- No 7(a),(b), 3rd corri and addenda]

Brick work with 1st class bricks in cement mortar (1:4) (a) In superstructure, grond floor [Ref : P.W.D.(Bldg.), Page-15 , Item- No 7(a),(b), 3rd corri and addenda

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation [Ref:P.W.D.(Bldg.). Page- 43, Item - 36.(f)]

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel I. SAIL/ TATA/RINL [Ref:P.W.D.(Bldg.).2ndCorri Page- 1,Item- 40.(a).(i)]

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor). (ii) With 4:1 cement mortar. (b) 15 mm thick plaster [P.W.D.(Bldg.). Page- 189, Item-1(ii). & 3RD Corrigenda]

Neat cement punning on cement plaster surface. [Ref : P.W.D.(Bldg.), Page -192, Item-15]

Fixing post of iron or precast concrete by digging hole in the ground (in all sorts of soil) and embedding the same by packing the hole with cement concrete (1:3:6) (with jhama khoa. For Purulia, Bankura and Darjeeling Hill by Pakur Variety, Local Black Hard Stone & Bazree respectively) and finishing the top surface to regular shape (as directed) with 15 cm cement plaster (1:6) complete, including the cost of concrete, plaster etc.but excluding the cost of the post : (ii) Average dia. of the hole 300 mm. to 400 mm. (a) Depth 450 mm. to 500 mm. (Cement- 14..35 Kg/No.) [Ref : P.W.D.(Bldg.), Page-219, Item No. 1.(ii).a]

Labour for fitting wove wire or similar fencing net tightening and fixing the same to post with staples at every bar (including the cost of cutting and lapping joints in the net, the cost of staples, binding wire etc. and of labour for fixing such staples as necessary). Payment to be made on the length of net in finished work.) a) Net upto 1350 mm. height

(b) Net above 1350 mm. Height [Ref : P.W.D.(Bldg.), Page-219, Item No. 1.(ii).a]

Supplying fitting and fixing 600 mm ( ±30 mm) diametre R.B.T (Reinforced Barbed Tape) Concertina fencing on wall top using concertina coils stretched to approx.6 meters length at site clipped with two nos. of horizontal R.B.T strands which will be tensioned and fixed with the vertical M.S angle iron posts by means of security fasteners (such as 'C' clips, R.B.T clips etc.) (d) Barbed wire [Ref : P.W.D.(Bldg.), Page-222, Item No. 13]

Supplying galvanised staples fitted and fixed complete (c) 44 mm. to 50 mm. Size [Ref : P.W.D.(Bldg.), Page-221, Item No. 5.(c)]

Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete. (iii) 16 mm. dia. (b) 300 mm. [Ref : P.W.D.(Bldg.), Page-220, Item No. 4.3.(b)]

M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm). [Ref : P.W.D.(Bldg.), Page-103, Item No.-8]

Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick). [Ref : P.W.D.(Bldg.). Page- 198, Item-5]

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (b) Two Coats [Ref : P.W.D.(Bldg.). Page- 196, Item-8]

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in- Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all a) Normal Acrylic Emulsionof primer.incidental charges but excluding the cost a) Normal Acrylic Emulsion [Ref : P.W.D.(Bldg.). Page- 197, Item-17.a]

(a) Priming one coat of timber or plastered surface with synthetic oil bound primer of approved quality including smoothenig surfaces by sand paper etc. [Ref : P.W.D.(Bldg.), Page-200, Item No.1 (a)]

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand oapering etc. Including using of approved putty etc. On the surface, if necessary : (ii) Two coats (white in shade) [Ref : P.W.D.(Bldg.), Page-200 Item-2(a) ]

(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. ii) Grill weighing above 16 Kg./sq.mtr and above [Ref : P.W.D.(Bldg.). Page- 104, Item-13.(a).(i) & 3rd corrigenda]

Add 18% GST

Add 1% Cess