PERIODICAL SERVICES AND CERTAIN REPAIR AT ITARANA PALACE (MAHAL) AREA OF AGE BR-II UNDER GE ALWAR AT MIL STN ITARANA

Taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc upto any height (approx 25 Meter) including necessary MS scaffolding complete, including necessary MS scaffolding complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 15mm thick on fair faces of brick work or stone surfaces (Cement plaster 1:4) finished even and smooth without using extra cement at upto any height (approx 25 Meter) including necessary MS scaffolding complete all as specified and as directed by the Engineer-in-Charge

M&L for rendering 15mm thick on fair faces of brick work or concrete or stone surfaces (Cement plaster 1:6) finished even and smooth without using extra cement at any height including necessary MS scaffolding complete all as specified and as directed by the Engineer-in-Charge

M&L for preparation of new plastered surfaces of walls/ceilings and applying a coat of waterproof cement based putty exterior/interior grade @ 1 Kg(undiluted) per sq mtr. of average thickness1 mm, of Birla/JK white or its equivalent over the plastered wall after scrappingto prepare the surface even and smoothnote using Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer to take further surface finishes . Proper masking to be carried out before primer and paint application). Note : (a) Masking of window/doors during spray painting using polythene film will be included in unit quoted rate. (b) work will be executed any height including necessary MS scaffolding complete all as specified and as directed by the Engineer-in-Charge

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, work will be executed upto any height including necessary MS scaffolding complete all as specified and as directed by the Engineer-in-Charge

M&L for one coat of synthetic enamel paint including preparation of old decorated steel surfaces/concrete surface of any description over 10 Cm width or girth not otherwise described, work will be executed upto any height including necessary MS scaffolding complete all as specified and as directed by the Engineer-in-Charge

M&L for complete removal of existing surface of wall/ceiling using mechnicle sanding maching (having mechanical vacuum mechanism) with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer and applying waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness1 mm, and prepare the surface fair and smooth to take further surface finishes complete all specified and directed by skilled labour as per following steps:- Step 1) Mix the putty powder by adding 40-50% water and mix it with Asian PaintsTrucare Putty mixer(Trucare Putty mixier with min1400 W power havinng mixer rod ofindustrial stell grade 45 with the mixing capacity of min 2.5 kg putty per minute) Step 2) Apply the first coat the prepared mixer with the help fully automatic airless spraymachine of putty application of Asian Paints Trucare Graco Spray Machine(Model: Mark VII) or equivalant having a DC electric motor of 3.3 KW having flow speed of max 6ltrs per minutes with a maximum pressure 230 bar having maximum tip size 0.041" Step 3) Allow 6-8 hrs time to dry the putty surface Note: (a) Masking of window/doors during spray painting using polythene film will be included. (b) work will be executed upto any height including necessary MS scaffolding complete all as specified and as directed by the Engineer-in-Charge

M&L for Prepartion of wall putty surface prepared vide srl item no 6 above and applying two coats of oil bound distemperover one coat of primer walls/ceilings as per manufacuturers instruction using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage Asian Paints or Berger Paints/Nerolac Paints and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note: - (a) Masking of window/doors during spray painting using polythene film will be included. (b) work will be executed upto any height including necessary MS scaffolding complete all as specified and as directed by the Engineer-in-Charge

M&L for Prepartion of wall putty surface prepared vide srl item no 6 above for two coat of water based premium acrylic smooth exterior emulsion/Apex of approved quality over and including a coat of primer any colours/multi colors with silicon additive & Color stay Technology ,Excellent Dirt Pick up Resistance of Asian Paints or Berger Paints/Nerolac Paints/Shalimar Paints with low VOC less than 50 , Anti Algal properties in two coats@ 1.79 ltr (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied with fully automatic airless spray machine of paint application of Asian Paints or Berger Paints/Nerolac Paints/Shalimar Paints having an electric motor of min. 1 HP with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both thecoats of paint with 5 years performance warranty from Manufacture and instructions complete all as specified and directed. Note : (a) Masking of window/doors during spray painting using polythene film will be included. (b) work will be executed upto any height including necessary MS scaffolding complete all as specified and as directed by the Engineer-in-Charge

Demolition of wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards/ slabs/ blankets/board fixed in aluminum door or partition, any thickness, including cover fillets & framed work if necessary complete all as specified and directed by Engr-In-Charge.

S&F 5mm thick ACP wall cladding sheet in colour as directed by Engr-in-charge fixed on MS frame size of section 25mmx50mmx3.25 mm. The size of each panel not exc 1.5sqm. MS frame to be fixed on walls, chajja and fasad with Min 08 Nos GI fastener 5" long per 1.5 sqm, including all necessary repairing work as reqd, two coat of synthetic enamel paint over one coat of red oxide primer, including weather sealing sealant, masking tape, including cutting of V groves to fixing moulded ACP sheet self-tapping screw any height including necessary MS scaffolding complete all as specified and as directed by the Engineer-in-Charge Note:- MS frame should be fixed on wall after painting.

M&L for PVC profile for wall paneling of size 23cm wide, 8mm over all thick and 01mm wall thickness fixed with screw to mild square tubular steel frame work mad e out of MS Hollow section of size 25mm x 15mm x 2mm spacing 01 meter on both side frame work shall be fixed in wall with the help rawl plug and required length of screws and MS work shall painted with one coat of Red oxide primer for wall panelling,complete all as specified and directed by Engr-In-Charge.

Material and labour for false ceilings using GI sanp grid system with rool-formed out of hot drip galvanised steel capings (Powder coated) main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick designer ceilimg board, prepainted cement fibre board size 595x595x4mm thick any texture (Lake, Hill, ocean cascade or Electra ) suspended from from RCC roof/ structural members of soofits angle cleat cut out etc to ther equired line and shape as per manufactureres recommndations at any height complete all as specified and as directed by GE, Everest ceiling and grid system Regular T-2430 or its equivalent Make of "Ramco/Charminar/Armstrong"

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge

M&L for Screed bed or bedding layer 15 mm thick in CM (1:6) for laying floor finishes/ paths etc., complete all as specified and directed by Engr-In-Charge.

M&L for vitrified ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed by Engr-In-Charge.

M&L for Vitrified Ceramic tiles light shade/ /double charge/ ultracharged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed by Engr-In-Charge.

M&L for Glazed Coloured Ceramic tiles in vertical surface 600X1200mm 7 to 8 mm thick set and joint in neat cement slury and pointed in white or colour cement to match the colour of the tiles, complete all as specified and directed by the Engineer-in-Charge .

M&L for Rendering or bedding layer for tiles as in vertical surfaces 10 mm thick in CM (1:4) for back coat. Complete all as specified and directed by Engr-In-Charge.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid,bedded and pointed in any mortar complete all as specified and directed by Engr-In-Charge.

M&L for Screed bed or bedding layer 20 mm thick in CM (1:6) for laying floor finishes/ paths etc., complete all as specified and directed by Engr-In-Charge.

M&L for 16-18mm thick Granite including cutting polishing rounding on edge etc machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including grinding and polishing (Color aproved by Engr-in-charge) complete all as specified and directed by Engr-In-Charge.

M&L Machine pre polished cut kota stone slab 18 mm(+-2mm) thick and jointed with grey slurry mixed with pigment to match the slab including rubbing and polishing as per complete all as specified and directed by Engr In Charge.

M&L for 20mm+-2 thick marble tiles machine cut in skirting/dado laid over 20mm thick in CM (1:6) cement screed and jointed with grey cement slurry including cutting and polishing complete all as specified and directed by Engr-In-Charge.

M&L for Chequered cement concrete tiles with grey cement and pigments 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with 15mm thick bedding layer of cement sand mortar (1:6) including 100mm thik cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes including dismentling complete all as specified and directed by Engr In Charge.

S&F precast machine pressed PCC interlocking paver block of 80 mm thickness, M-40 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved and 100mm thick plain cement concrete, type D-2, 1:4:8, (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping including sand cusion and dismentling complete all as specified and directed by Engineer-in-Charge.

S&F aluminium frame powder coated any colour (minimum thickness of powder coating 50 micron) for doors, windows, partician, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified

S&F 35mm Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr In Charge.

M&L for mild steel framed work as in doors frames and gauge shutters made of angle or hollow/square/rectangular/circular section and other covering door to be prepared for hanging or or sliding with and including either hooks, praporsanaly made sliding door bolt, hinges, handels fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, nacessary arrangements i.e.flat, self tapping screw for fixing of wiremesh, necessary bolting including welding complete conforming to FE-290 Gde E-165. making as good, Wire gauge will be measured and paid separately complete all as specified and directed by Engr In Charge.

S&F 150mm long brass, barrel tower bolts of ex- truded section and fixed complete and specified and directed by engr-in -charge.

S&F in repair brass body Mortice lock, vertical type,size 100 mm 4 lever, incl escutcheon plate and two No keys fixed complete all as specified and directed by Engr-in-Charge.

S & F in repair aluminium extruded section door closer hydraulically operated designation No-03, universal type, suitable for door shutters of 851 to 1000mm width and of weight of 61 to 80 Kg complete all as specified and directed by Engr In Charge.

Dismantling plain/corrugated steel/AC sheeting any gauage thick ness including Nainital and similar pattern complete all as specifed and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M&L for two coat of synthetic enamel paint including preparation of new decorated steel surfaces of any description over 10 Cm width or girth not otherwise described, work will be executed upto 4th floor using MS scaffolding complete all as specified and directed by the Engineer-in-Charge

Dismantling water tank and removing to store exeeding 250 but n.exc 500 ltrs complete all as specifed and directed by Engr-In-Charge.

S&F for rotational moulded polyethylene water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specifed and directed.by Engr-In-Charge.

Dismantling water tank and removing to store exeeding 500 but n.exc 1000 ltrs complete all as specifed and directed by Engr-In-Charge.

S&F for rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specifed and directed by Engr-In-Charge.

S&F in repair 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S&F in repairs Gun-metal, glabe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed dia of bore of pipe 20mm complete all as specified and directed by Engr-In-Charge.

S&F in repairs Vitreous China wash basin white ovel shape counter top of size 630x450mm including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting and making good complete all as specified and directed by Engr In Charge.

S & F in repair hand shower( health faucet ) with 1.0 m long tube and hook complete all as specified and directed.

S&F for PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts, PVC Band/socket with making good etc complete all as specified and directed by Engr In Charge.

S&F steel water tubing, galvanised, medium grade, ISI marked with all fittings and fixed on walls and ceilings or laid in floors bore of pipe 20 mm complete including taking down or up 20mm steel water tubing and removing to store complete all as specified and directed by Engineer-in-Charge.

M & L for complete removal of existing roof treatment (Mud puska, Cement Tiles, bricks or Old APP Roof treatment and vegetation from root) including bedding layer in cement mortar/Mud and disposed from MoD land complete all as specified and directed by Engineer-in-charge.

M&L PCC 1:2:4 type B1 (using 20mm graded stone aggregate) mixed with 3.00% liquid water proofing compound of weight of cement laid 25 mm thickness as in padding over roof slabs for providing proper slope to the concrete padding, surface finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:- (a) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface. (b) Applying evenly a tack coat of bitumen 85/25 grade @1.20 kg/ sqm. (c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc. (d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame. Note:- This treatement shall be done by the approved authorized applicators and guarantee of treatement shall be minimum 10 years complete all as specified and directed by Engr In Charge.

Material & labour for rendering 20 mm thick in cement mortar 1:4 over RCC Roof mixed with water proofing compound @ 3% by weight of cement or manufacturer instruction finished even and fair complete all as specified and as directed.

S&F in repair 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints including band/all fittings, laid in trenches or in floors or wall etc including removing from site complete all as specified and directed by Engineer-in-Charge.

S&F in repair 75mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints including band/all fittings, laid in trenches or in floors or wall etc including removing from site complete all as specified and directed by Engineer-in-Charge.