REPAIRS TO PAVER BLOCK, KERB STONE, HEAVY DUTY PARKING TILES, CHEQUERED TILES ON FOOTPATH HARDSTANDING ETC

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft & loose soil

M&L for Sand filling under precast concrete inter locking paver floors or in foundations including watering and consolidation

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement & pigment

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc 15 cm thick, spread, levelled and blinded with earth and rammed incl watering hand roller 0.2 to0.5 tonne complete all as specified and directed.

M&L for hardcore of broken stone or boulder of gauge exc 63mm but n.exc 75 mm deposited, spread & leveled in lyers n.exc 15 cm thick watered & rammed to a true surface.

M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregateas in level course

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in cement motar

M&L for heavy duty vitrified pavement tiles of size (300 X 300) as in footpath set in CM (1:6) includung filling joint with white/coloured cement to match complete all as specified & directed.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete

Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches,pillars, rtc., but excluding ashlar facings, dressed stonework and precast concrete articles.built in cement mortar

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:4), straight or curved on plan exc 6 m mean radius complete all as specified and directed.

All as per item No 11 above herein except bricks.

Taking down cement or cement lime plaster from brick or stone walls etc. including racking out joints, hacking for key,scrubbing down with water, etc.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement (including as in patches also).all as specified and directed by Engineer-on-Charge

M&L for prepartion of newly plastered surfaces and applying two coats of cement based paint over a coat of primer on wall

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided fo.

M&L for RCC M-30 design mix with using 20mm graded stone agg as in columns, pillars, piers, posts and struts.

M & for reinforced cement concrete Type B1 (1:2:4) using 20mm aggregate in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete

M&L for mild steel TMT bars (Fe 500 D) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L mild steel TMT bars (Fe 500 D) 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L mild steel TMT bars (Fe 500 D) 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Formwork to sides of rough finished flat surfaces of concrete pillars, posts, struts, piers, columns, and stanchions fair finished surfaces of concrete in square, rectangular etc all as specified and directed.

Formwork to sides of rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete etc all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M & L for Framed work such as grills, gratings, etc..ornamental and intricate design with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level)

M&L75 mm thick, Cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base.

M&L100 mm thick, Cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in pavings, hardstandings and similar work .

DANWAR AND ASSOCIATES

Rounaq Enterprise

ELECTRO COMMERCIAL CO

Bansal And Co

M/S JANAKI ENTERPRISES

R.B.Construction

Rekha Enterprises

MS SUBHAM ENGINEERING AND CO

Bidder Name

Bansal And Co

Rounaq Enterprise

R.B.Construction

Rekha Enterprises

ELECTRO COMMERCIAL CO

DANWAR AND ASSOCIATES

M/SNeelachal Enterprises

M/S JANAKI ENTERPRISES

MS SUBHAM ENGINEERING AND CO