PROVN OF TOILET HEALTH SECTION AND 02 X GARBAGE BIN AT MH PACHMARHI

Amount

Surface excavation in soft / loose soil nexc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Excavating in trenches insoft disintegreted soil n exc 1.5 m wide and n exc 1.5 m depth and getting out for foundation complete all as specified and directed.

Excavating over areas, n exc 1.5 m depth and getting ou tsoft disintegreted soil for septic tank and soakage well complete all as specified and directed.

Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone as in foundation /sub base of floor, filling and mass concrete complete all as specified and directed.

Material and labour brick work in with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6.complete all as specified and directed.

S&F TMT bars 10 mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire [annealed] not less than 0.9 mm dia or scruing with clips complete all as specified and directed.

All as per item no 8 above but 5mm dia and over upto and including 10mm in stirrups, spacers and binders complete all as specified and directed.

M&L for precasted cement concrete slab type B-1, 1:2:4 using 20mm graded aggregates as in manholes cover slab set in cement mortar 1:6 complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in beams, lintels upto 1.5mtr span complete all as specified and directed.

M&L for formwork to the side and soffit of floor or roof beam,girders cantilevers , lintel shelves etc complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm complete all as specified and directed.

M&L 10 mm thick plaster in cm(1:6) finished even &smooth with trowel without using extra cement shall be provided over all internal surfaces of wall complete all as specified and directed.

M&L external surfaces shall be plastered 15 mm thick in two layers on fair faces of brick work first layer (rendering coat) of plaster shall be 10mm thick in CM (1:6) & second layer (finishing Coat) shall be 5mm thick in cm(1:4) mixing of wpc as per manufactured instruction complete all as specified and directed.

M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.

M&L for broken stone/boulders for hardcore of gauge nexc 63 mm, deposited, spread and levelled in layers nexc 15 cm thick in two layers watered and rammed to true surface complete all as specified and directed.

M&L for 40 mm thick damp proof course in cement cocrete ratio 1:2:4 type B0 to horizantal surface including neccesary formwork complete all as specified and directed.

M&L Water proofing treatment on "Non approachable / non accessible and approachable roof" surface (Horizontal, sloped & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete (i) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm (ii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces. (iii) Laying /unrolled over the bitumen coated surface, APP based polymeric membrane minimumweighing 3kg/sqm and minimum 3mm thickreinforced with polyster non wove fabric (wt. notless than 150 gms/sqm) land on primed surfaceby forced application complete all as specified with 100 mm over laps shall be sealed by flame as per manufacturers instruction. (iv) Applying two coats of bituminous aluminium paint including preparation complete all as specified and directed.

M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete all as specified and directed.

Material and labour for applying Three coat of white wash to newly treated plastered surfaces of wall complete all as specified and directed .

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40 mm graded stone as in sub base of floor complete all as specified and directed.

M&L for 75mm thick PCC type C2, 1 :3 :6 using ( 20mm graded aggregate ) as in plinth protection / floor finishes surface with using extra cement complete all as specified and directed.

S&F tubes 15 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.

S&F tubes 20 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.

M&L for non skid, joint free, coloured ceramic tiles 7-8mm thick (Square/Rectunglar), area of each tile exc .06Sqm But not exc .11 Sqm etc set in floor and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), area of each tiles shall be of following complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces 350 x 250 x 7 mm / 450 x 350 x 7 mm [thick] set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over 10mm thick screed in CM 1:3 complete all as specified and directed. (Note : screed bed will not be measured paid separately)

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 500 litres complete all as specified and directed.

S&F Ball brass valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe complete all as specified and directed.

S & F 20 mm dia gun metal or gate valve with ironwheel head screwed both for iron pipe and fixed complete all as specified and directed.

S&F vitreous china wash down water closet pan (Pedestal pattern)white including fixing bolt and plastic water closet seat white closed pattern with flat bottom cover with MS chromium plated hinging devices to matching colour complete all as specified and directed.

Supply only PVC valveless, syphonic action type 10 ltrs flushing cistern low level white with inlet, ball valve float and handle incl brackets [Make :Parryware( Slimline) / Commander (champion) / Hindware] complete all as specified & directed.

Supply only PVC connection 15mm size with PTMT nut of length 300mm complete all as specified and directed.

S&F 15mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F vitereous china wash basin, white flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, incl 32 mm dia brass CP waste fittings (coupling) including 32 mm waste pipe complete all as specified and directed.

Supply only 15mm dia pillar taps cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm) complete all as specified and directed.

Supplied only Liquid water proofing compoundcomplete all as specified and directed.

S& F brass chromium plated tubular towel rail 20mm dia D type, 60 cm long between flanges complete all as specified and directed.

PVC door frame of size 50mm x 47mm made out of 5mm plain colour pvc sheet reinforced with MS square tube, suppling & fixing in opening complete all as specified and directed.

S&F 100 mm size butt hinges extruded cold rolled with mild steel pin,bright polished type B11 medium weight, cold rolled complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per scomplete all as specified and directed.

S&F for sliding door bolt ofAluminium alloy anodised 250 mm complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 125 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

M&L 150 mm bore Salt - glazed stone ware drain pipes, ('A' grade) laid in trenches and jointed complete all as specified and directed.

M&L Plain cement Concrete ( 1:4:8) type D2 bed to 150 mm bore drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested ;in complete all as specified and directed.

S&F 110mm PVC(SWR) bends any radius complete all as specified and directed.

S&F PVC (SWR) pipes 75 Dia single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L (SWR) 75mm dia floor trap plain with grating including jointing with solvent cementcomplete all as specified and directed.

S&F 75mm bore PVC (SWR) junction single, (single Tee) equal or unequal with access door complete all as specified and directed.

S &F 75mm bore (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bend of any radius complete all as specified and directed.

S&F Bib tap 15mm bore fancy type chromium plated , cast copper alloy with crutch or butterfly handle screwed down for iron pipes all as specified and as directed.

S&F aluminium powder coted ventilator louvers type frame top and bottom of size 31x42x1.60mm(sec no-20558) rectaular tube of size 40x20x2 mm (sec no-14019 and middle verticalof size 42x46.20x1.60mm sec(20560) and clip for fixing wiremesh and glass of size 19x17.30x0.90mm (sec no-19360)thick including and fixing stainless steel wire cloth 0.36mm niminal dia of wire and 1.40mm average width of aperature and fixed with stainless steel wire staples and supply and fixing 5mm thick louvers with blades of 100 mm heavy duty with neccessary rubber beading ,gasket etcincluding necessary plaster, painting ,cill and making good to disturbed portion complete all as specified and directed.

Excavating in trenches in Hard/Dense soil n exc 1.5 m wide and n exc 1.5 m depth and getting out for foundation complete all as specified and directed.

Material and labour modular brick work in with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed..

M&L PCC type B-1, 1:2:4 (using 20mm graded aggregate) as in coping ,benching, haunching including all necessary form work complete all as specified and directed.

S&F for 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed.

M&L external surfaces shall be plastered 15 mm thick in two layers on fair faces of brick work first layer (rendering coat) of plaster shall be 10mm thick in CM (1:6) & second layer (finishing Coat) shall be 5mm thick in cm(1:4) complete all as specified and directed.

S&FJoist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 using 20 mm graded stone as in floor complete all as specified and directed.

M & L preparation new surfaces of walls and providing one coat of cement base paint complete all as specified and directed.

M&L for preparation of New steel surfaces of any description not otherwise described over 10cm width or girth and providing one coats of synthetic enamel paint complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40 mm graded stone as in sub base of floor complete all as specified and directed.

M&L for 60mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 , M-35Grade with grey cement and pigment over stone dust filling complete all as specified and directed.( Cost of Stone dust will be measured and paid separately)

M & L for Sand Stone filling under floors or in foundations including wateringand consolidation complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M25 grade cement concret in position to the required line, level and curvature, jointed with cement mortar 1:3 including making joint with or with out grooves including making drainage opening wherever required complete all as specified and directed.

Point wiring with 1100 volts grade PVC insulated FR -LSH multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators complete for One light point controlled by one switch complete all as specified and directed.

All as per item no 72 above but One Exhaust fan point controlled by one switch complete all as specified and directed.

Point wiring with 1100 volts grade PVC insulated FR LSH multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed.

S&F angle holder, insulated polycabonate body with back plate complete all as specified and directed.

S&F switch piano flush button single pole one way 6 amp complete all as specified and directed.

S&F switch piano flush button single pole one way 16 amp complete all as specified and directed.

S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified and directed.

S&F MCB distribution board SPN, 240 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spacescomplete all as specified and directed.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR-LSH multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour 20 mm dia along with accessories of nominal sizes 2x4 sqmm + 1x4 sqmm earth continuity conductor complete all as specified and directed.

S&F LED batten (1.2 m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete all as specified and directed.

S&F LED light fitting mirror type with high putput diffuser 2 feet 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp. complete all as specified and directed.

All as per item no 85 above but One Single pole and neutral (SPN) 40 amp. complete all as specified and directed.

S&F Ventilation fan 150mm sweep exceptionally super silent operation, automaic front openting to prevent entry of foreign objects and easy maintainance and cleaning complete all as specified and directed.

GHASI RAM SAHU