Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.6 LAccepted-AOC | L1 | Accepted-AOC SINCE LOWEST BIDDER | |
| 2 | L2₹25.8 L+₹3.2 L (14.3%)Rejected-Finance | L2 | Rejected-Finance SINCE NOT L1 BIDDER | |
| 3 | L3₹26.0 L+₹3.4 L (14.8%)Rejected-Finance | L3 | Rejected-Finance SINCE NOT L1 BIDDER | |
| 4 | L4₹26.8 L+₹4.1 L (18.3%)Rejected-Finance RIDMALSAR PUROHITAN BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | L4 | Rejected-Finance SINCE NOT L1 BIDDER | |
| 5 | L5₹27.0 L+₹4.4 L (19.5%)Rejected-Finance | L5 | Rejected-Finance SINCE NOT L1 BIDDER |
Tender Value
₹28.7 L
EMD Value
₹57,400
Closing Date
8 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AMRITSAR CANTT
HQ CWE ASR OLD CANTT
PROVN OF NIGHT PICKET ROOM 1 PLUS 8 ALONGWITH 01 x SANTRY POST NEAR GATE NO 6 AND PROVN OF TOILET FOR ADM STAFF AT PANTHER OFFICERS INSTITUTE AT OLD AMRITSAR CANTT
2023_MES_588650_1
CWE/ASR-02/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE AMRITSAR
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE AMRITSAR
₹57,400
Yes
3 Jul 2023
8 Apr 2023
16 May 2023
8 Apr 2023
8 May 2023
25 Apr 2023
Amount
M&L for surface dressing n exc 15 cm deep soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil complete all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 1.5 cm in depth,3.00 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material n.exc 50 m and depositing where directed complete all as specified and directed.
Cement concrete type D2, 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.
M&L RCC (Design Mix) M-25 (20mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L RCC(Design Mix) M-25 (20mm graded aggregate) in column, pillars, piers, post and struts complete all as specified and directed.
M&L for RCC (Design Mix) M-25 (20 mm graded aggregate) as in Beams, canatilivers, bressummers, lintels over 1.5m span etc complete all as specified and directed.
M&L RCC(Design Mix) M-25 (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
S&F Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of rough finished surfaces of concrete in foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
S&F Formwork to sides of pillars, posts, struts, piers, columns and stanchions of rough finished surfaces of concrete complete all as specified and directed.
S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces of concrete complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.
M&L TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L TMT Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Ditto as item No 17 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight curved on plan exc 6 mean radius built in CM 1:6 complete all as specified and directed.
M&L for Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:6 and to be finished even and smooth ( without using extra lime or cement) complete all as specified and directed.
M&L fpr Rendering 15 mm thick on fair/unfair faces of brick work or concrete surfaces in CM 1:4 and to be finished even and smooth ( without using extra lime or cement) complete all as specified and directed.
M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 as on ceiling and to be finished even and smooth ( without using extra lime or cement) complete all as specified and directed.
Material and labour preparation of newly plastered surface of wall and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified.
M&L for applying two coats of whitewash on ceiling including preperation of newly plastered/old decorated surfaces complete all as specified and directed.
M&L preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment complete all as specified and directed
M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in roof padding Finishing fair and even.complete all as specified.
M&L for cleaning of dust & dirt , Removal of all loose existing bituminous material or with chipper & applying heat torch gun to get smooth plain finished surface. Repair all joints & cracks with Highly Elastic bituminous Cold applied Putty-Tarplast- having penetration after setting upto 8mm & confirming to IS 1580:1991. Any annular space between drain pipe and concrete should be filled with mortar admixed with ShaliSBR latex of STP Ltd. Making necessary Gola 75x75 mm with rich cement mortar admixed with ShaliSBR latex of STP Ltd at the interface of horizontal & Vertical junctions complete all as specified and directed.
M&L Slightly damp the surface, avoid standing Water. Prime the surface with Tarfelt LM mixed with potable water in the ratio 1:1 and apply @ 400gm/sqm (as per surface condition). Allow the primer to touch dry in tacky position in open atmosphere. Thenafter apply 1st coat of Tarfelt LM (Liiquid membrane) having elongation 200% confirming to ASTM-C-412 & bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.5mm confirmin to ASTM-C-412 with no diluation of water on primed surface is still tacky with consumption of 0.7 kg/sqm. lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. Allow the first coat to dry for 10-12Hrs. Apply 2nd coat of cured first coat with consumption @ 0.7kg/sqm in opposite dierction of first coat by Brush or roller. Sprinkle sand @ 200Gm P/Sqm while the coating is stick to facilitate plastering for protection screed. Allow it to dry for 10-12 hrs . Apply 3rd coat if required as per site reqirement. Providing & Laying minimum 50mm PCC in slope with welded wire mesh 1.5 mm as reinforcement and PCC admixed with Shallplast LW+ of STP Ltd (Integral Waterproofing compound) @200 ml per bag of cement on horizontal surface for mechanical protection over a separation layer of ShallGeo Textile 120 gsm in client Scope complete all as specified and directed.
M&L for broken bricks Hardcore of gauge n exc. 63 mm, deposited , spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L 75mm thick Cement concrete type D2, 1:4:8 using 40mm graded agregate as in sub base of floor complete all as specified and directed.
M&L Cement concrete 75 mm thick type C-2 (1:3:6) using 40 mm graded stone aggregate as in plinth protection etc finished even and smooth using extra cement completed all as specified and directed.
S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.
S&F glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.
M&L for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 sqm each) over cement screed base of 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified
All as per srl Item No 34 here-in-before but as skirting/dado over rendering 10mm thick in CM 1:4 complete all as specified and directed.
S&F vitreous China Squatting pan 'Orrisa' pattren size 580x440mm white with integral foot rest and PVC(SWR) 'P' trap 110/110mm bore complete. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately complete all as specified and directed.
S&F of Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore complete all as specified and directed. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separatelycomplete all as specified and directed.
Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia complete all as specified and directed.
Supply only Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) complete all as specified and directed.Make-Prayag/Shakti and all other equivalent makes specified in App 'B' list of makes
S&F PVC Jet spray suitable for EWC complete all as specified and directed.. Make-Prayag/Polytuf and all other equivalent makes specified in App 'B' list of makes
Supply and fixing Chromium plated Health faucet in repair with 1.5 metre long chain complete all as specified and directed.
S&F in Repair vitreous China wash basin white,flat back size550x400mm including CP waste coupling 32mm bore,waste PVC pipe complete, CP brass Pillar Tap 15mm bore of fancy type complete.
S&F in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F Brass chromium plated Wall mixer with bend pipe in repairs suitable for mixing Hot & Cold water and making leakagefree connection with wall tiles & GI pipes complete all as specified and directed.
Supply & Fixing vitreous china urinal half stall type with CP spreader white incl CP waste coupling with grating and union fordischarge pipe, including providing and fixing plug, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and union for discharge pipe complete all as specified and directed.
S/F in repair15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete complete all as specified and directed.
S/F in repair15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle complete.
S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed
S&F in repairs 100mm dia CP grating with or without hole type complete all specified and directed.
S&f in rfepairs CP brass towel rail of 20mm dia and 600mm long complete all as specified and directed.
S&F in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.
S&F 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.
S&F 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down all as specified and directed.
S&F in repair PVC (SWR) pipe 75mm dia fixed in wall/floor.
PVC (SWR) pipes single110mm socketed, in any length with rubber ring joints, laid in trenches or in floors
S&F in repair 75mm PVC (SWR) bends any radius.
S&F in repair 75mm PVC floor trap complete all as specified.
PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
S&F Solid PVC Door Frame of Size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube in opening as per specification and frawing.
S & F 28 to 30 mm thick (Rajshri brand) factory made solid PVC moulded Door shutter with 2,3 or6 raised psnel design with 2mm thick moulded PVC Sheet on the front face and 2mm plain colour PVC Sheet on back face, fixing in frame at site as per specification and drawing.
Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete all as specified and directed.(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- Sheet glass, wire mesh and painting shall be measured and paid sperately.
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. NOTE:-Sheet glass and painting shall be measured and paid Separately.
S&F pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed
S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed
S&F in repair Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding complete all as specified and directed.
S&F factory made 30 mm thick flush shutters solid core construction with block board core and plywood face panels.
M&L two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces.
S&F 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.
S&F Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed complete all as specified and directed.
S&F 150mm long Aluminium handles, cast type anodised complete all as specified and directed.
S&F stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.
S&F clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty complete all as specified and directed.
M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described above priming coat of red oxide including prepration of previously untreated surfaces complete all as specified and directed.
Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore complete all as specified and directed.
M&L Providing precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chulla hoods, chajjas, ater troughs, mangers, shelves and similar articles with plain faces complete all as specified.
M&L TMT Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
Loose filling with Brick aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.
S&F framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete.
M&L for Machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments over and including 50mm thick sand cushioning complete all as specified and directed.
M&L PCC (1:2:4) type B1 using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges complete all as specified.
M&L for applying two coats of whitewash on wall including preperation of newly plastered/old decorated surfaces complete all as specified and directed.
S&F Vitrous china urinal partition white of size 310x770mm and fixed to wall terminating about 40cm above floor line complete al as specified and directed.
S&F powder coated aluminium frame for doors ,windows, ventilators with one or more rebates including joining cleats for fixing complete all as specified and directed by Engineer-In-Charge.( Min. thickness of powder coating 50 micron) complete all as specified and directed.
S&F Aluminium powder coated (of any colour) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified .(Min. thickness of powder coating 50 micron) complete all as specified and directed.
S&F Sheet glass, 5.5mm thick ordinary quality, in squares,exceeding 0.50 sqm in each pane including rubber packing and aluminium beading with and incl solar control film 25 Micron reflective type sticked to glass panes as per instructions of manufacturer scomplete all as specified and directed
M&L Providing precast cement concrete B0 1:2:4 (12.5mm graded stone agrregate)louvres and jallies, 40mm thick (measured solid), including all mould- ings but excluding frame complete all as specified and directed.
Cutting into existing manholes for connecting 150 dia new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
M&L for point wiring for One light point/Fan point controlled by one switch complete with 1.5 sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade with multi stranded, copper conductor in and including non-metalic PVC conduit incl accessories totally concealed in wall, ceiling/roof etc., with pressed steel terminal boxes of suitable size & modules, concealed in walls incl plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing switches/sockets/regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, unsheathed, 1100 volt grade, multistranded single core green colour copper conductor for earth continuity connected to earth dolly all as directed NOTE: Pressed steel terminal boxes with a coat of synthetic enamel paint over a coat of red oxide to steel surface to avoid rust incl suitable thick laminated sheet cover plate for mounting switch/sockets/regulator/bell push etc, concealed in wall and Cost of cutting chases & making good to distrubed surface with cement mortar, if required any shall be deemed to be included in the quoted rate
All as per ser item No. 93 above but for One 3 pin 5 Amps socket outlet on independent board.
All as per ser item No. 93 here in above but point wiring with 4.0 Sqmm FRLS cable and 4.0 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.
S&F switch piano, flush type, single pole, one way 5 Amp, 240 volt, white or ivory ISI marked complete all as specified
S&F switch piano, flush type, single pole, one way 15 Amp, 240 volt, white or ivory ISI marked complete all as specified
S&F switch socket outlet 5 pin, 2 in 1, 5 Amps, 240 volts complete all as specified
S&F switch socket outlet 5 pin, 2 in 1, 5 and 15 Amps, 240 volts complete all as specified
S&F ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65 x 50 mm three terminal, 240 volts, AC single phase complete all as specified
S&F Lamp holder angular type, PVC/Polycarbonate type with back plate suitable for batten fittings including suitable size presto plastic board for resting to holder complete all as specified
S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, double sided connection, holder including LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F LED roadway luminaries 35 Watt, 230 V AC outdoor type with epoxy black powder coated sheet, high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket of suitable size with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting complete and testing complete all as specified and directed.
S&F ceiling fan 1200mm sweep complete with blades, down rod, electronic regulator & accessories (i.e. PVC canopy, rubber bush, split pin, hanging clamp, holdfasteners etc.) 230 Volts, white colour, with min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) technology and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to ceiling fan and writing MES No. complete all as specified and directed
Supply, install & testing exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, single phase, 1200 RPM, Copper winding of sweep 300mm complete fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan and writing MES No. including cutting hole suitable for fixing exhaust fan complete all as specified and directed
S&F storage electric heater (Geyser), flexible mounting of capacity 25 ltrs, single phase, 240 volts, AC, white colour, ISI marked BEE 5 star rated complete with high precision & externally adustable capillary thermostat for temp regulation, backup safety overheating capillary therrmal cut out at 95ºC, temperature display, etc., including provn of new suitable holding clamp, MS bolts, grouted to wall and connecting up including 3 core sheathed multi-stranded flexible copper conductor cable connected with 15/16 Amp plug top and provn of water connections with new PVC steel braided inlet/outlet connection pipe 15mm dia, 450mm long with two numbers brass union, NRV of suitable size, check/end nuts with washers, 15mm dia 100mm long nipples (02 Nos) for hot water and cold water connections including writing MES No. and making good to the disturbed surface in cement morter as required and testing complete all as directed NOTE: Cost of flexible copper cable of 3 core, PVC steel braided inlet/outlet pipe of 15mm dia, 450mm long with brass union, NRV, check/end nuts, nipples, MS bolts, etc., and minor parts, if any, other than those are not specified in the schedule and required for smooth functioning of geyser will be deemed to be included in the quoted rate
Supply and install evaporative desert coolers (steel body) factory made 22 gauge PGI sheet of size 100 x 70 x 60 cm approx, front and side panels are made of same gauge with wood wool pads having nominal air flow capacity of 5000 cfm or nearest size, having exhaust fan motor of capacity 1/5 HP with 18" steel blade size, submersible pump of capacity 1/60 HP and powder coated including necessary fixing arrangement to fixed the desert cooler complete all as specified and directed
S&F galvanised steel water tubes medium grade with screwed socket joint together with and including all GI fittings such as bends, elbows, short piece connectionns, backnuts, caps plugs and unions etc laid in tranches/fixed on walls/laid on floors of 20mm dia including testing complete all as directed and specified
S&F gun metal, globe or gate valve of size 20 mm dia with iron wheel head, screwed both ends for GI pipe complete all as specified and as directed
Supply & laying in trenches/drawn through pipes or in road crossing/paths/drains/ducts/floors/along poles/equipments etc., of XLPE insulated, armoured with multistranded aluminium conductor cable conforming to IS-7098 Part-I (1998), heavy duty (LT UG cable) conforming to IS-1554, 1100 Volts grade of size 25 sqmm 3½ core nominal cross sectional area including connecting up using suitable size double compression copper gland, testing and commissioning complete all as specified and directed NOTE: Excavation, earthwork & cable protection etc. will be measured and paid separately under relevant items of this schedule.
Supply & laying double wall corrugated (DWC) high density poly ethylene (HDPE) of size 50mm dia including all necessary fittings, PN-4 rating, pressure 6 Kgf/cm², conforming to IS-16205 (Part-24) with high ring stiffness & cursh resistance capacity, etc., laid in trench for protection of UG cable complete all as specified and directed NOTE: Excavation & earth work where required shall be measured separately. But, clamps for fixing on wall shall be included in the unit rate
M&L for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 12 way, 240 volts grade with 200 Amps insulated rated bus bar, earth bar IP- 43 & IK-09, door earthing flush to wall, including testing suitable for fixing MCB SPN, SP etc., complete all as directed.
S&F MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing complete all as directed
S&F MCB of SPN 40 to 63 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing complete all as directed
S&F MCB of SPN 32 Amps current carrying capacity, 240V, 10KA 'C' curve fixed in the MCB DB complete with connection testing complete all as directed
Material & Labour in repairs earthing complete with galvanised earth plate electrode 600mm X 600mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 metres below ground level) with top edge of earth plate not less than 1.5metres below normal ground level, connected to GI Wire of size 4mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No.3 of MES SSR 2009, Part – I (Specifications) and connected to main switch board/LT feeder panel including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in alternate layers with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150mm both ways center to center with suitable lifting handle to cover, earth pit made of PCC 1:3:6 type C-1, GI protection pipe light grade 20 mm bore up to 7.5metres length from earth electrode including testing complete all as specified and directed NOTE: (i) Earth lead and protection pipe beyond 7.5 m shall be measured and Paid separately. (ii) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor without any extra cost to Govt.
ESS KAY BUILDER
GEE EMM ASSOCIATES
S S CONSTRUCTION COMPANY
M/s. M Company
m/s inder construction co
Santokh Singh and Associates
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .