Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 CrAccepted-AOC BAKRON KA WADA NEAR NEELAM CINEMA JODHPUR ROAD BALOTRA BARMER RAJASTHAN 344022 | BALOTRA | BARMER | RAJASTHAN | 344022 | ₹14.4 Cr | L1 | Accepted-AOC BEING LOWEST |
| 2 | L2₹14.4 CrRejected-Finance | ₹14.4 Cr | L2 | Rejected-Finance BEING NOT LOWEST |
| 3 | L3₹15.9 CrRejected-Finance | ₹15.9 Cr | L3 | Rejected-Finance BEING NOT LOWEST |
| 4 | L4₹16.9 CrRejected-Finance | ₹16.9 Cr | L4 | Rejected-Finance BEING NOT LOWEST |
| 5 | L5₹17.2 CrRejected-Finance 126 A JAIPUR HOUSE AGRA 282010 PH NO 0562 2810176 9897638555 | ₹17.2 Cr | L5 | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹17.6 Cr
EMD Value
₹12.1 L
Closing Date
21 Dec 2023, 6:00 pmClosed
CE (AF) Prayagraj
HQ CE (AF) Prayagraj 211012
PROVN OF TWO IGLOOS FOR STORAGE OF ARMAMENT STORE AS PER CWR AT AF STN GWALIOR
2023_MES_607577_1
958435/e8
Open Tender
Civil Works
547 days
GE (AF) Tech Area Gwalior
Please refer Tender documents.
8 documents required · 8 mandatory
₹3,000
GE (AF) Tech Area Gwalior
₹12.1 L
Yes
27 Jan 2024
1 Jul 2023
28 Dec 2023
26 Sept 2023
21 Dec 2023
7 Dec 2023
Amount
SCHEDULE A Part - I (BUILDING WORKS)
Lump sum price worked out by the contractor for Building works (02 Nos of 75 ton LRC Igloos and other works) as listed in Sch ‘A’ Part I .
Sch A Part II (INTERNAL ELECTRIFICATION)
Lump sum price worked out by the contractor for INTERNAL ELECTRIFICATIONS as listed in Sch ‘A’ Part II .
Sch A Part III (EXTERNAL WATER SUPPLY)
Lump sum price worked out by the contractor for External Water Supply as listed in Sch ‘A’ Part III .
Sch A Part IV (EXTERNAL ELECTRIFICATION)
Lump sum price worked out by the contractor for External Electrifications as listed in Sch ‘A’ Part IV.
Sch A Part V (AREA DRAINAGE)
Lump sum price worked out by the contractor for AREA DRAINAGE as listed in Sch ‘A’ Part V.
Sch A Part VI (Road, Path, Hardstanding )
Lump sum price worked out by the contractor for Road, Path, Hardstanding as listed in Sch ‘A’ Part VI
Sch A Part VII (Provn of Danger Board )
Lump sum price worked out by the contractor for Provn of Danger Board as listed in Sch ‘A’ Part VII
Sch A Part VIII (FIRE POINT)
Lump sum price worked out by the contractor for 02 Nos of Fire Point as listed in Sch ‘A’ Part VIII.
Sch A Part IX (FIRE BREAK)
Lump sum price worked out by the contractor for FIRE BREAK as listed in Sch ‘A’ Part IX
Sch A Part X : BLANK
Sch A Part XI (Security Fencing )
Lump sum price worked out by the contractor for Security Fencing as listed in Sch ‘A’ Part XI
Sch A Part XII (Retaining wall )
Lump sum price worked out by the contractor for Retaining wall as listed in Sch ‘A’ Part XII.
Sch A Part XIII (Lighting Protection)
Lump sum price worked out by the contractor for Lighting Protection as listed in Sch ‘A’ Part XIII.
Sch A Part XIV (Site Clearance )
Lump sum price worked out by the contractor for Site Clearance and development as listed in Sch ‘A’ Part XIV.
Sch A Part XV (Miscellaneous Items of B/R and E/M)
Material and labour for construction of new valve chamber size 600mmx600mmx600mm including necessary earth work in any type of soil, PCC foundation (1:3:6 ) type C-2 , 40mm graded stone aggregate as in base concrete, brick work in CM 1:6 with 10 mm thick plaster internally and 15 mm thick externally in (upto 15 cm below NGL) CM 1:4, 4 mm thick MS cover with hinges and locking arrangement fixed to angle iron frame made out of 40x40x6 mm MS angles complete with 2 coat of synthetic enamel paint over one coat of red oxide primer on all metal works and three coats of white wash on all plastered surface of valve chambers complete all as specified and as directed by Engr- in- charge.
Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed by Engr- in- charge.
Supply and fixing LED wellglass light fitting 1x120 Watt flame proof, CMRI/BIS/PESCO certified for gas group IIA, IIB, IIC recommended Zone 1 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up fitted on wall with suitable mounting arrangement with three core flexible copper conductor cable of suitable size all as spcified and directed by Engr-in-charge.
Supply and fixing LED flood light fitting 1x30 Watt flame proof, CMRI/BIS/PESCO certified for gas group IIA, IIB, IIC certified recommended for Zone 1 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size all as spcified and directed.
Supply and laying bricks (old size) for cable protection by using common burnt clay building bricks, sub-class ‘B’ designation 75 laid dry flat across length of the cable with width of the trenches equal to length of bricks complete all as specified and directed.
M&L for two single core wiring for street light fitting complete with 2 runs of 1.5 sqmm single core PVC insulated and unsheathed copper conductor cable 1100 volts grade drawn through inside the pole without PVC conduit complete all specified and directed.
M&L for Precast cement concrete blocks factory made kerb stone type B1 1:2:4 (using 20mm graded stone aggregate) set in cement mortar 1:4
M&L 100mm thick PCC M25 (design mix) using 20 mm graded stone aggregate as in roads/ hardstanding complete including necessary formwork etc. complete all as specified and directed.
M&L for concrete bed to drain pipe including packing under and completely concrete surrounding pipes and laid and tested in PCC 1:3:6 type C2 complete all as specified and directed.
Supply and fixing LED street light 60 watts made up of pressure die cast housing with toughned glass/ PC cover and individual high power LEDs with secondary optics,min. IP65 protection complete all as specified and directed by Engr-in-Charge.
Supply and fix GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-charge.
Supply and fix weather Proof thermo plastic (Polystyrene)/SMC cable junction box ,having protection classIP-66 and overall size 210mm x155mm x 92 mm having metric knockouts on the wall, three phase complete with bakelite connector 4nos 20 apms busbar capacity 4 way, MCB SP 06 amps capacity with necessary fixing arrangements by providing MS clamps 02 nos made out of MS flat 25 x 3 mm painted with one coat of primer & two coats of paint including nut bolts etc complete all as specified and as directed.
Supply, Install, Testing and Commissioning CPRI type tested, factory made, totally enclosed, IP 54 dust, weather and vermin proof, CRCA MS sheet out door LT Panel for 415V, 3 phase 4 wire , 50 Hz AC system with TPN tinned copper bus bar of rating 1.5 times that of controlling MCCB supported on F class DMC/FRP insulator with short circuit withstand capacity 21 MVA for 1 second, neutral bus bar of capacity of that of phase bus bar , general construction confirming to IS-8623/93, having bottom base channel of MS section not less than 75mm x 75 mm x 5 mm , entire panel having common aluminium earth bar of size 25mm x 5mm at the rear with 2 Nos earth stud, solid connection from main bus bar to switchgears with required size ( minimum 1.5 Sqmm) PVC insulated copper conductor cable , cable alleys, cable gland plates in two half inculding LED indicating lamp for all phases and , mounted on suitable PCC foundation for the complete panel base with following detailed specification, control and accessories complete:- OUTER SHELL :- The outer shell shall be made of min 3 mm thick CRCA MS sheet supported on on MS angle section 75mm x 75 mm x 5 mm frame with openable front & back with concelaed hinges , single door system, lockable/ openable by by keys from both sides, having flush pattern fancy locks, louvers & air vent with gasket for natural flow of air. The bottom of the outer shell contains a detachable plate with hing provision for entry of armoured cable with adequite size glands. Provision of earthing studs at bottom and threaded lifting lugs of suitable size at top to lift the feeder pillar box safely shall be made. Computer cut self adhesive vinly danger notice plate having conventional symbol of bone and skull shall be provided.
M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to galvanized iron strip of 32x6mm by means of bolts nuts, check nuts and washers of galvanised iron or steel all as shown in electric plate No 3, of SSR Part - I, 2009 & all as specified, testing on completion including provision of earth lead protected by 40 mm dia GI pipe medium grade & watering pipe 20 mm medium grade including all excavation and earth work in any type of soil, PCC earth pit with RCC cover, charcoal & salt, PGI funnel with wire mesh etc complete including making good disturbed surfaces of wall, floor. Note : ( i ) The rate is inclusive of cost of earth lead and protection pipe upto 7.5 m. (ii) Irrespective of what is shown on plate No 3 of SSR Part-I /2009, the earthing pit shall be precasted PCC (1:3:6) type C1 20 mm stone aggregate and the cover of earthing pit shall be of precast RCC (1 :2 : 4) type B1 using 20 mm aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia with suitable handle fushed with surface all as specified. (iiii) The rates quoted by the contractor is deemed to be inclusive of cost of MS sheet of size 300mmX 300mmX3mm size, fixed with necessary nuts and bolts on angle iron of size 40X40x5mm & length 60cm and grouted in the ground with PCC (1:3:6 using 20mm grade stone aggregate of size 200mmX200mmX250mm including necessary earth work.for marking the result and purpose
Supply and fixing anti collision red light LED light fitting 1x 05/10 W Watt with Polycarbonate cover with LED light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed.
Supply and fixing sheet metal enclosure for FLP MCB, TPN 63 Amp Incommer, Out going 32 Amp TPN -1 no for EOT crane, SP 6 Amp 9 nos for light points, phosphatised, Powder coated , three pole and neutral (TPN) 440 volts , double door, suitable for 11way with dim rail earth and neutral bar complete all as specified and as directed.
Supply and Fix of LED revolving search light, energy saving, long range, 230V, 150 Watt beam range 400 mtr with stand, manually operated suitable for mounting of search light on for manual rotating of the light on the horizontally (360 degree) and vertically (more than 45 degree) with provision of both locking arrangement at desired position, IP 66 dia cast LM6 body with air fins, powder coated body complete all as specified and as directed.
Material and Labour for earthing complete with galvansided steel earth plate electrode 600 x 600 x 6.0mm thick directly burried in the ground (Earth pit not less than 2.25 m deep below normal ground level) with top edge of earth plate not less than 1.50M below the normal ground level with and including provision of earth test point terminal block made out of gun metal or phosphorus bronze of size 75x75x25mm drilled and screwed with & including 3 Nos. 8mm dia 25mm long hexagonal head screw and necessary connections complete, connected to GI wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, 15mm bore GI pipe medium grade including necessary fittings for protection of earthing wire, watering pipe 20mm bore GI medium grade, concrete chamber in PCC (1:4:8) type D-2 using 40 mm grade aggregate, coping shall be in PCC (1:3:6) type C-1 using 20 mm grade aggregate and internal surfaces of concrete chamber shall be given 12mm thick plaster in CM (1:4), funnel with wire gauge of 22 gauge (0.63 mm) 8 mesh per linear incl 50mm thick cover of RCC (1:2:4) type B-1 using 20mm grade stone aggregate reinforced with 8mm MS deformed bar @ 75 mm C/C both ways, char coal dust and common salt all as shown in electrical plate No. 3 of SSR Part-I (2009) including all necessary excavation & earth work and removal of surplus soil to a distance n. exc 50M and providing connection points with MS bolts & washers as required and connection from earth test point to earth electrode with same GI wire alongwith protection pipe (upto max distance of 7.5 mtr is included in unit rate) and testing on completion complete all as specified and directed. Note : ( i ) The rate is inclusive of cost of earth lead and protection pipe upto 7.5 m. (ii) Irrespective of what is shown on plate No 3 of SSR Part-I /2009, the earthing pit shall be precasted PCC (1:3:6) type C1 20 mm stone aggregate and the cover of earthing pit shall be of precast RCC (1 :2 : 4) type B1 using 20 mm aggregate reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia with suitable handle fushed with surface all as specified. (iiii) The rates quoted by the contractor is deemed to be inclusive of cost of MS sheet of size 300mmX 300mmX3mm size, fixed with necessary nuts and bolts on angle iron of size 40X40x5mm & length 60cm and grouted in the ground with PCC (1:3:6 using 20mm grade stone aggregate of size 200mmX200mmX250mm including necessary earth work.for marking the result and purpose
Design, supply, installation, testing and commissioning of electrically operated,indoor, overhead traveling (EOT) cranes, totaly enclosed (Flame proof) conforming to IS : 3177 (latest revision), suitable for operation on 415 Volts, 3 Phase, 4 wires, 50 HZ supply, double girder box type, with necessary steel supporting structures as per drg no. CE/ALD/1134-ST Sheet 8/8, with Hoisting, Cross Travel (CT), and Long Travel (LT) with micro drives through clutch and geared motor of suitable capacities with control panel, power and controlling cables, confirming to relevant IS, controlled by pendent push button station of operation, with and including the followings: - Type of Crane : Double Girder box type TE Flame Proof EOT Crane (Certified by CMRI Dhandad) as per IS 3177 and IS 807 (latest revision) Class of Duty : M5 as per IS 3177 (1977) Capacity : 05 Ton Operating Enviroment : Indoor in Explosive Storage Category 'B' building (Flame Proof) Span : 09 Mtrs (Approx) Lift of hoist : 05 Mtrs (Approx) Longitudinal Travel : 36 Mtrs (Approx) Crane control operation : Hanging Pendant and radio remote operation Speed Main Hoist : 3 Meter per minute Cross Travel : 8 Meter per minute Long Travel : 12 Meter per minute Creep speed for main hoist : 10 % of normal speed Speed Control : for all motions speed range of 10% to 100 % of rated speed through variable speed drive control from pendent push button. Power Supply Reqd : a) Main Supply -415 V. 3 Phase, 50 c/s. A.C. b) Control Voltage-110 V. Single Phase, A.C. c) Power supply to crane through Down Shop Lead(DSL) conductor
(xvii) Electric Contactors : shall be of have SIEMENS / L&T / GE suitable for Crane operations. Crane duty AC-4 ratings.The rating of all contactors shall be at least 50% higher than the respective electric motor full load current, at the specified duty cycle. (xviii)Trailing Cables : Trailing cables (Extra flexible having copper conductors only) should be traveling on rollers moving on separate I- Beam parallel to Bridge Girder and both for LT & CT shall be supplied and Erected by supplier. (xix) Illumination : 2 Nos. of 150 Watts LED Lamps & fittings shall be provided under the Bridge and 1 No. shall be provided under CT Trolley. Fittings shall be of non-integral type. (Total lights 3 Nos.). (xx) Painting Instruction : (a) Surface Cleaning: Girder to be shot blasted or chemically treated for surface cleaning, after completion of all operations but prior to painting. Contractor to furnish the details of facilities for Shot Blasting M/c at their / OEM's works. (b) Painting: One coat of Red Oxide Primer with 25 micron DFT (Dry Film Thickness) and 48 hours of compusory curing after painting. The crane should be thoroghly cleaned and final painting with two coats Enamel Paint (Colour-Golden Yellow) each with a DFT of 25 micron and intemittent curing of 16 hours. Final touching will be done after errection & commissioning at site if required. (viii) All other incidental, Civil, Electrical, Mechanical works. Notes for EOT Crane item. 1. The various dimensions given above are approximate. Drawings showing Plans, Elevations, Sections and Structural details are enclosed. The contractor is advised to verify the drawings as well as visit the site of work for accurate measurements of these dimensions. In any case before undertaking fabrication work the contractor must ascertain the final finished dimensions. 2. The subject crane is meant for the purpose of handling Explosive . All eletrical component must be housed in totally enclosed (IP 66) enclosures. 3. The department shall be responsible for providing suitably rated electrical outlet in the Main Electrical Control Panel/Main Distribution Board of the buildings. All other works, electrical earthings and associated incidental and minor works shall be the responsibility of the contractor.
M&L for chemical earthing with copper plate 900mm x 600mm x 5mm thick, burried directly in ground vertically to a depth of not less than 4.70 mtr below normal ground level with top edge of earth plate not less than 3.60 mtrs below ground level connected to copper stip 32 x 6 mm as main earthing lead by means of copper/brass nut, bolt duly brazed earth strip protected with 50mm bore medium grade GI pipe from electrode and upto and including the earth test point of gun metal/ phosphorous bronzed of size 75 x 75 x 25mm incl 3 nos 8 mm dia 25mm long hexagonal head screws with 230x40x5mm copper test link, watering pipe medium grade 20mm bore GI pipe including funnel, wire mesh, providing alternate layer of 10 CM each charcoal and megnesium sulphate layer upto 1.2mtr and including excavation, returning in filling, removal of surplus soil to a distance not exceeding 50mtr, PCC pit in PCC 1:2:4 type B1 using 20mm graded stone aggregate, RCC Cover 40mm thick in RCC (1:2:4) type B1 using 20mm garded stone aggregate reinforced at 8mm dia TMT bars @75mm centre to centre both ways including MS handle of 12mm dia round bar etc to be placed on and including angle iron frmae made of section 40 x 40 x 3mm of angle iron complete all as specified. Note :- All earthwork, PCC, Copper strip and protection medium grade GI pipe upto 7.5 mtr shall be deemed to be included in the rates quoted by the contractor. Notes:- The rates quoted by the contractor is deemed to be inclusive of (i) Cost of MS sheet for marking the result and its purpose of use of size 300mm x 300mm x 3mm size fixed with necessary nuts and bolts on angle iron of length 60cm and size 40x40x5mm grouted in the ground with PCC(1:3:6) using 20mm grade stone masonary of size 200mm x 200mm x 250mm including necessary earth work. (ii) PCC in 1:3:6 type B1 using 40mm aggregate 75mm thick in 1.5 x 1.5mm size around earth pit chamber. (iii) On testing, after completion of job, if desired earth resistance (less than 1 Ohm) is not found, the earthing shall be redone at no extra cost to Govt.
Supply & Fix GI wire mesh of size 50x50x4mm/ 75x75x4mm dia of wire or of any type, make upto matress and laid in position with MS flat and 3 Nos of 10mm dia MS round bars as line wire welded to steel fencing posts (MS round bar and flat iron will be measured and paid for separately) complete all as specified and as directed.
M&L for 200 mm thick (compacted thikness ) granular sub base (GSB) grading -II using stone aggregates of size 40mm to 60 mm interstices filled , laid in single layers, spread, rolled & consolidated to required gradient & camber using power roller 8 to12 tonne capacity etc complete all as specefied and directed.
M&Lfor 150 mm thick (consolidated thikness ) wet mix mecadam (wmm) laid using mechanical paver in two layer of each 75 mm thick (compacted thickness) using crushed stone agg of approved grading, rolled & consolidated to required gradient & camber using power roller 8 to12 tonne capacity including necessary lateral supports and form work if required using crushed stone etc complete all as specefied and directed.
NITYA NAND AND SONS CONTRACTORS PVT LTD
MAGO CONSTRUCTION PVT. LTD.
LUMOS INFRA PVT LTD
RAMJI DAS DHAL CONSTRUCTION PVT LTD
Pooja Singla Builders And Engineers Pvt Ltd
surendra infrastructure pvt ltd
FRIZO INDIA PVT LTD
SAWHNEY BUILDWELL LLP
NSC Projects Pvt. Ltd.
NAND LAL PURI AND SONS PRIVATE LIMITED
K KUMAR RAJA PROJECTS P LIMITED
stage.html
html • 0.09 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid